Ab-initio density functional theory study of a WO3 NH3-sensing mechanism

WO 3 bulk and various surfaces are studied by an ab-initio density functional theory technique.The band structures and electronic density states of WO 3 bulk are investigated.The surface energies of different WO 3 surfaces are compared and then the (002) surface with minimum energy is computed for its NH 3 sensing mechanism which explains the results in the experiments.Three adsorption sites are considered.According to the comparisons of the energy and the charge change between before and after adsorption in the optimal adsorption site O 1c,the NH 3 sensing mechanism is obtained.     

Electronic structures and magnetoelectric properties of tetragonal BaFeO3: an ab initio density functional theory study

First-principles calculations have been performed to investigate the ground state electronic properties of BaFeO₃ (BFO). Local spin density approximation (LSDA) plus U (LSDA+U) treatment modified the metallic behaviour to insulated one with a band gap of 4.12eV. The spontaneous polarization was found to be 89.3\muC/cm² with Berry phase scheme in terms of the modern theory of polarization. Fe-3d e_g were split into two singlet states (d_z² and d _x²-y²}), and Fe-3d t_2g were split into one doublet states(d_xz and d_yz) and one singlet states(d_xy) after Fe and O displaced along the c axis. Meanwhile the occupation numbers of d_z², d_yz, d_xz and O_T p_z (on the top of Fe) were increased at the expense of those in xy plane. Our results showed that it was the sensitivity of hybridization to ferroelectric distortions, not just the total change of hybridization, that produced the possibility of ferroelectricity. Moreover, the increasing occupation numbers of O_T p_z and Fe d_z² favoured the 180^o coupling between Fe-3d e_g and Fe-3d t_2g, leading to ferromagnetic ordering, which has been confirmed by the increase of magnetic moment by 0.13μ_B per formula unit in the polarized direction. Hence, the magnetization can be altered by the reversal of external electric field.     

含铀化合物UAl3和USn3电子结构的密度泛函研究

用第一性原理的全势能LMTO密度泛函能带计算方法研究了具有简单立方Cu₃Au 结构的含U化 合物UX₃(X=Al, Sn)的电子结构.对于重原子U的相对论效应，除了用标量相对论 加以修正 外，还加入了自旋-轨道耦合的修正.研究结果定性地说明了由于不同的交换关联电子势场的 作用，在这两种结构相同的含U合金中，U的5f电子态具有完全不同的性质，即在UAl_{3< /sub>和US n3中U的5f态分别表现为巡游扩展态和局域态行为，通过St 关键词： 铀化合物 电子态 密度泛函理论 自旋-轨道耦合}     

用密度泛函理论研究氮化硅新相的电子结构、光学性质和相变

运用第一性原理赝势方法,对氮化硅新相(六方Pˉ6和Pˉ6′相)的电子结构、光学性质和相变过程进行分析,研究能带结构、介电函数谱、反射谱和能量损失函数的变化机理.研究发现,β→Pˉ6→δ相变是可行的,在室温下β→Pˉ6和Pˉ6→δ相变的临界压强分别为42.9和47.7 GPa;相界的斜率为正值表明Pˉ6→δ相变过程伴随着晶胞体积的塌缩;Pˉ6和Pˉ6′相分别属于直接带隙和间接带隙半导体,能隙宽度分别为4.98和4.01 eV;得到了两相的零频介电常数;反射谱表明,两相的强反射峰均位于真空紫外线区域,因此可以用作紫外光屏蔽或紫外探测材料;在可见光区域,两相表现为近似透明.     

Structure and electronic structure of S-doped graphitic C3N4 investigated by density functional theory

The structures of the heptazine-based graphitic C3N4 and the S-doped graphitic C3N4 are investigated by using the density functional theory with a semi-empirical dispersion correction for the weak long-range interaction between layers.The corrugated structure is found to be energetically favorable for both the pure and the S-doped graphitic C3N4.The S doptant is prone to substitute the N atom bonded with only two nearest C atoms.The band structure calculation reveals that this kind of S doping causes a favorable red shift of the light absorption threshold and can improve the electroconductibility and the photocatalytic activity of the graphitic C3N4.     

Oxygen vacancy formation and migration in Sr- and Mg-doped LaGaO3: a density functional theory study

Oxygen vacancy formation and migration in La0.9Sr0.1Ga0.8Mg0.2O3-5 （LSGM） with various crystal symmetries （cubic, rhombohedral, orthorhombic, and monoclinic） are studied by employing first-principles calculations based on density functional theory （DFT）. It is shown that the cubic LSGM has the smallest band gap, oxygen vacancy formation energy, and migration barrier, while the other three structures give rise to much larger values for these quantities, implying the best oxygen ion conductivity of the cubic LSGM among the four crystal structures. In out calculations, one oxygen vacancy migration pathway is considered in the cubic and rhombohedral structures due to all the oxygen sites being equivalent in them, while two vacancy migration pathways with different migration barriers are found in the orthorhombic and monoclinic symmetries owing to the existence of nonequivalent O1 and 02 oxygen sites. The migration energies along the migration pathway linking the two 02 sites are obviously lower than those along the pathway linking the O1 and 02 sites. Considering the phase transitions at high temperatures, the results obtained in this paper can not only explain the experimentally observed different behaviours of the oxygen ionic conductivity of LSGM with different symmetries, but also predict the rational crystal structures of LSGM for solid oxide fuel cell applications.     

基于含时密度泛函理论的表面等离激元研究进展

纳米粒子的局域表面等离激元(LSP)由于其新颖的光学特性成为目前国内外研究的热点之一. 本文利用含时密度泛函理论(TDDFT)对金属团簇及石墨烯纳米结构中的等离激元激发及调制的物理本质进行了研究. 和宏观大小的材料相比, 由于纳米结构的尺寸和量子受限效应, 纳米结构的等离激元具有一些不同的特征. 在低能共振区, 光谱线发生展宽, 并且发生劈裂. 由于纳米单体间的电磁耦合作用, 使聚合的纳米结构表现出了与单体不同的光学性质. 这些结果为等离激元的调控提供了坚实的理论指导.     

Thermoelectric transport coefficients of n-doped CaTiO3, SrTiO3 and BaTiO3: A theoretical study

Boltzmann transport equations and density functional theory calculations were employed to calculate the thermoelectric transport coefficients of CaTiO₃, SrTiO₃ and BaTiO₃. It was found that BaTiO₃ has the largest Seebeck coefficient and power factor. Then the transport coefficients were analyzed using the ‘Tight Binding Model’. The band narrowing, caused by the increasing lattice constants from CaTiO₃ to BaTiO₃, was the main reason for the increasing Seebeck coefficients and the decreasing electrical conductivity. The calculated electrical conductivity and electronic thermal conductivity were in line with the Wiedemann-Franz law and the Lorenz factor was determined to be 2.45 for these oxides as degenerate semiconductors. Our theoretical results are helpful for seeking high performance thermoelectric oxides.     

Universality principle and the development of classical density functional theory

The universality principle of the free energy density functional and the ‘test particle' trick by Percus are combined to construct the approximate free energy density functional or its functional derivative. Information about the bulk fluid radial distribution function is integrated into the density functional approximation directly for the first time in the present methodology. The physical foundation of the present methodology also applies to the quantum density functional theory.     

基于密度泛函理论的C_(24)H_(38)O_4分子外场效应研究

各种环境毒物危害着人类的健康,塑化剂更是破坏了食品安全.为研究外电场对塑化剂主要成分之一C_(24)H_(38)O_4(邻苯二甲酸二辛酯,dioctyl phthalate,DOP)的影响,采用密度泛函理论B3LYP方法在6-311G(d,p)基组水平上优化了不同静电场0—0.0125 a.u.(0—6.4278×10~9 V/m)作用下DOP分子的基态几何结构,在此基础上利用同样的方法计算了DOP分子的电偶极矩和分子总能量,最后利用含时密度泛函理论在同一基组下研究了不同外电场对DOP分子紫外-可见(UV-vis)吸收光谱产生的影响,并与实验测得的光谱图进行了比较.结果表明:分子几何构型与电场大小呈现强烈的依赖关系,分子偶极矩随着外电场的增强先减小后增加,而分子总能量随着外电场的增强先增加而后急剧减小;DOP分子激发态的振子强度随着外电场的增强而减小,UV-vis吸收峰显著红移.     

Abnormal odd-even staggering behavior around 132Sn studied by density functional theory

In this work, we have performed Skyrme density functional theory (DFT) calculations of nuclei around ¹³²Sn to study whether the abnormal odd-even staggering (OES) behavior of binding energies around N = 82 can be reproduced. With the Skyrme forces SLy4 and SkM*, we tested the volume- and surface-type pairing forces and also the intermediate between these two pairing forces, in the Hartree-Fock-Bogoliubov (HFB) approximation with or without the Lipkin-Nogami (LN) approximation or particle number projection after the convergence of HFBLN (PLN). The Universal Nuclear Energy Density Function (UNEDF) parameter sets are also used. The trend of the neutron OES against the neutron number or proton number does not change significantly by tuning the density dependence of the pairing force. Moreover, for the pairing force that is favored more at the nuclear surface, a larger mass OES is obtained, and vice versa. It appears that the combination of volume and surface pairing can give better agreement with the data. In the studies of the OES, a larger ratio of surface to volume pairing might be favored. Additionally, in most cases, the OES given by the HFBLN approximation agrees more closely with the experimental data. We found that both the Skyrme and pairing forces can influence the OES behavior. The mass OES calculated by the UNEDF DFT is explicitly smaller than the experimental one. The UNEDF1 and UNEDF2 forces can reproduce the experimental trend of the abnormal OES around ¹³²Sn. The neutron OES of the tin isotopes given by the SkM* force agrees more closely with the experimental one than that given by the SLy4 force in most cases. Both SLy4 and SkM* DFT have difficulties in reproducing the abnormal OES around ¹³²Sn. Using the PLN method, the systematics of OES are improved for several combinations of Skyrme and pairing forces.     

碳分子线C5在激光场中的含时密度泛函理论研究

运用含时密度泛函理论和分子动力学相结合的方法, 研究了C₅分子线在强激光场中的电离激发.研究发现, 当考虑激光强度对C₅分子线激发的影响时, 激光强度越强, 分子吸收的能量越多, 电离也越早, 最终电离的电子也越多, 而且沿激光极化方向的偶极矩的变化及峰值也越大. 关于激光极化方向对C₅分子线激发的影响的研究表明, 当激光极化方向沿着C₅分子线轴向时, 分子的电离大大增强, x方向的激光脉冲仅能激发起x方向的偶极振荡, 而y方向的激光脉冲仅能激发起y方向的偶极振荡, 而且x方向的激光脉冲激发的偶极振荡强. 研究还表明, 当激光极化方向沿着C₅分子线轴向时, 尽管由于电离增强而导致C₅分子线C–C键振动的同步性变差, 但在两种激光极化方向情况下, C₅分子线的振动模式与中性C₅分子线的振动模式相同. 关键词： 含时密度泛函理论 分子动力学 分子电离 碳分子线     

Theoretical studies of structural and magnetic properties of cubic perovskites PrCoO3 and NdCoO3

The structural and magnetic properties of cubic perovskites, PrCoO₃ and NdCoO₃, are studied using the full potential linearized augmented plane wave (FP-LAPW) method within the frame work of density functional theory (DFT). The structural parameters are also investigated by analytical techniques. The calculated structural parameters are consistent with the experimental results. The strong hybridization of the O-2p, Co-3d and Pr/Nd-4 f states around the Fermi level reveals that these compounds are metallic. It is also found that the origin of ferromagnetism in these compounds is double-exchange interaction between Co-3d states via O-2p states (Co-O-Co).     

Ab-initio density functional theory study of a WO3 NHa-sensing mechanism

WO3 bulk and various surfaces are studied by an ab-initio density functional theory technique. The band structures and electronic density states of WO3 bulk are investigated. The surface energies of different WO3 surfaces are compared and then the （002） surface with minimum energy is computed for its NH3 sensing mechanism which explains the results in the experiments. Three adsorption sites are considered. According to the comparisons of the energy and the charge change between before and after adsorption in the optimal adsorption site Olc, the NH3 sensing mechanism is obtained.     

Structural and magnetic properties of double-perovskite Ba2MnMoO6 by density functional theory

Perovskite-like materials which include magnetic elements have relevance due to the technological perspectives in the spintronics industry. In this work, we report the studies of Ba₂MnMoO₆ material by using the density functional theory. The interchange-correlation potential was included through the generalized gradient approximation. Our structural calculations are in agreement with the experimental results which show that the material crystallizes in the 225 space group (Fm3¯m) and has a lattice parameter of about 8070 Å. The density of states study was carried out by considering the up and down spin orientations. Results show that Ba₂MnMoO₆ has a conductor behavior due to dominant Mn spin-up and Mo spin-down contributions. The magnetic moment was calculated to be 2.9 μ_B.     

Energy density functional analysis of the fission properties of 240Pu: The effect of pairing correlations

We have calculated the potential energy surfaces for ²⁴⁰Pu up to the scission point using the density functional theory with different pairing strengths to investigate the effect of pairing correlations on its fission properties. An enhancement in the pairing correlations lowers the barrier heights, isomeric state, and ridge between the symmetric and asymmetric fission valleys significantly. Moreover, it weakens the microscopic shell structure around the Fermi surface, shrinks the scission frontiers, especially for the symmetric and very asymmetric fission regions, and lifts the total kinetic energies (TKEs) for the symmetric fission region. It is also emphasized that the microscopic calculation qualitatively reproduces the trend of the distribution of the measured TKEs, especially for the positions of the peaks at begin{document}$A_{rm{frag}}simeq132$end{document} and begin{document}$A_{rm{frag}}simeq108$end{document}.     

Density functional theory study of the interaction of H2 with pure and Ti-doped WO3 (002) surfaces

Density functional theory (DFT) calculations are conducted to explore the interaction of H₂ with pure and Ti-doped WO₃ (002) surfaces. Four top adsorption models of H₂ on pure and Ti-doped WO₃ (002) surfaces are investigated respectively, they are adsorption on bridging oxygen O_1c, absorption on plane oxygen O_2c, absorption on 5-fold W_5c (Ti), and absorption on 6-fold W_6c. The most stable and H₂ possible adsorption structure in the pure surface is H-end oriented to the surface plane oxygen O_2c site, while the favourable adsorption sites for H₂ in a Ti-doped surface is not only an O_2c site but also a W_6c site. The adsorption energy, the Fermi energy level E_F, and the electronic population are investigated and the H₂-sensing mechanism of a pure-doped WO₃ (002) surface is revealed theoretically: the theoretical results are in good accordance with our existing experimental results. By comparing the above three terms, it is found that Ti doping can obviously enhance the adsorption of H₂. It can be predicted that the method of Ti-doped into a WO₃ thin film is an effective way to improve WO₃ sensor sensitivity to H₂ gas.     

基于密度泛函理论研究掺杂Pd石墨烯吸附O2及CO

基于第一性原理的密度泛函理论研究了单个O₂和CO气体分子吸附于本征石墨烯和掺杂钯(Pd)的石墨烯的体系, 通过石墨烯掺Pd前后气体分子的吸附能、电荷转移及能带和态密度的计算, 发现掺Pd后气体分子吸附能和电荷转移显著增大, 这是由于Pd的掺杂, 在本征石墨烯能带中引入了杂质能级, 增强了石墨烯和吸附气体分子间的相互作用; 氧化性气体O₂和还原性气体CO吸附对石墨烯体系能带结构和态密度的影响明显不同, 本征石墨烯吸附O₂后, 费米能级附近态密度变大, 掺Pd后在一定程度变小; 吸附还原性的CO后, 石墨烯费米能级附近态密度几乎没有改变, 表明掺杂Pd不会影响石墨烯对CO的气体灵敏度, 但由于CO对石墨烯的吸附能增大, 可以提高石墨烯对还原性气体的气敏响应速度.     

Hydrogen storage in BC3 composite single-walled nanotube:a combined density functional theory and Monte Carlo investigation

This paper applies a density functional theory(DFT) and grand canonical Monte Carlo simulations(GCMC) to investigate the physisorptions of molecular hydrogen in single-walled BC 3 nanotubes and carbon nanotubes.The DFT calculations may provide useful information about the nature of hydrogen adsorption and physisorption energies in selected adsorption sites of these two nanotubes.Furthermore,the GCMC simulations can reproduce their storage capacity by calculating the weight percentage of the adsorbed molecular hydrogen under different conditions.The present results have shown that with both computational methods,the hydrogen storage capacity of BC 3 nanotubes is superior to that of carbon nanotubes.The reasons causing different behaviour of hydrogen storage in these two nanotubes are explained by using their contour plots of electron density and charge-density difference.