聚环氧磺羧酸的合成及其阻垢性能

聚环氧磺羧酸的合成及其阻垢性能;聚环氧磺羧酸; 聚环氧琥珀酸; 阻垢剂     

近化学计量比碳化硅的制备及其结构表征

近化学计量比碳化硅的制备及其结构表征;聚碳硅烷;聚甲基硅烷;聚环硼氮烷     

新型阳离子聚丙烯酰胺离解行为的研究

前文曾报导,以聚丙烯酰胺为母体,通过甲醛为桥梁引入二氰二胺可合成一种新型阳离子聚电解质,简称PAm·MG,它是一种弱聚碱的盐酸盐,结构式如下(S 为取代度):PAm·MG 对含活性艳红染料的废水有明显的絮凝脱色作用,其絮凝效果受聚合物的取代度、介质的pH 以及外加盐浓度的影响,而这些影响因素又直接与聚碱的离解行为或胺基离子化度(指已离子化的胺基占全部胺基的分数)密切相关.为此,本文对影响PAm·MG 离解行为和离子化度的一些因素作进一步探讨,并通过粘度测定考察离解行为对聚合物在水中形态的影响,为PAm·MG 的实际应用提供理论根据.     

聚天门冬氨酸合成过程中的水解反应

L-天门冬氨酸;;聚天门冬氨酸钠盐;聚丁二酰亚胺;水处理;阻垢作用;聚天门冬氨酸合成过程中的水解反应     

聚并苯和聚并吡啶类化合物非线性光学性质及其分子材料设计

选取聚并苯、聚并吡啶和聚并吡嗪的 3种共振结构为基体 ,计算不同共轭单体齐聚物的结构及被取代后的聚合物二阶和三阶非线性光学系数 .结果表明 ,聚合物的二阶非线性光学系数与其单体相比有显著增大 ,被—NH2 和 NO2 取代后的聚并苯、聚并吡啶和聚并吡嗪的非线性光学系数又在聚合物的基础上进一步大幅度增加 ,有的增加 2～ 3个数量级 .在非取代的聚合物中 ,聚吡啶各种结构的二阶非线性光学系数均较大 ;取代聚合物中 ,单—NH2 和—NO2 取代的聚并苯 ,尤其是反式共振结构聚并苯的二位— NH2 和五位—NO2 取代结构的聚合物二阶非线性光学系数高达 3 .2 7× 1 0 - 2 7esu,说明这种— NH2 和 -NO2 取代后的聚并苯是一种很好的非线性光学材料 .     

絮凝处理对聚驱污水中部分水解聚丙烯酰胺浓度的影响

用常见无机和有机絮凝剂处理了聚驱污水,分别考察了絮凝剂单剂和复配处理后聚驱污水中残余部分水解聚丙烯酰胺(HPAM)质量浓度和透光率随絮凝剂剂量的变化.结果表明:采用无机絮凝剂处理聚驱污水时,残余HPAM质量浓度随絮凝剂剂量增加先减小后增大;采用有机絮凝剂处理聚驱污水时,残余HPAM质量浓度随絮凝剂剂量增加而线性增加.将无机絮凝剂与无机絮凝剂复配使用,则残余HPAM质量浓度与透光率成反比;将无机絮凝剂与有机絮凝剂复配使用,则残余HPAM质量浓度取决于复配体系中阳离子聚丙烯酰胺(CPAM)的添加量.     

磺化poss的合成及其与聚电解质的组装

层层组装;聚倍半硅氧烷(poss);聚电解质;复合多层膜     

聚二甲基二烯丙基氯化铵在聚合硫酸铁中的粘度行为

聚二甲基二烯丙基氯化铵在聚合硫酸铁中的粘度行为;PDMDAAC;PFS;聚电解质效应     

聚二甲基硅氧烷改性的聚氨酯齐聚物增韧环氧树脂

聚二甲基硅氧烷改性的聚氨酯齐聚物增韧环氧树脂;聚氨酯齐聚物;聚二甲基硅氧烷;环氧树脂;增韧;IPN     

端羟基聚环氧环己烷的合成

端羟基聚环氧环己烷的合成;端羟基聚环氧环己烷;环氧环己烷;阳离子聚合     

Synthesis of carbosilane block copolymers by means of a living anionic polymerization of 1,1-diethylsilacyclobutane

Block polymerization of 1,1-diethylsilacyclobutane with styrene derivatives and methacrylate derivatives was investigated. Sequential addition of styrene to a living poly(1,1-diethylsilabutane), which was prepared from phenyllithium and 1,1-diethylsilacyclobutane in THF–hexane at −48°C, gave poly(1,1-diethylsilabutane)-b-polystyrene. Similarly, addition of 4-(tert-butyldimethylsiloxy)styrene to the living poly(1,1-diethylsilabutane) provided poly(1,1-diethylsilabutane)-b-poly(4-(tert-butyldimethylsiloxy)styrene). Poly(1,1-diethylsilabutane)-b-poly(methyl methacrylate) was obtained by treatment of living poly(1,1-diethylsilabutane) with 1,1-diphenylethylene followed by an addition of methyl methacrylate. Poly(1,1-diethylsilabutane)-b-poly(2-(tert-butyldimethylsiloxy)ethyl methacrylate) was also synthesized by adding 2-(tert-butyldimethylsiloxy)ethyl methacrylate to the living poly(1,1-diethylsilabutane) which was end-capped with 1,1-diphenylethylene in the presence of lithium chloride. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2699–2706, 1998     

Chemical structure of composites derived from poly(silicic acid) and 2‐hydroxyethylmethacrylate

Organic–inorganic hybrids from 2‐hydroxyethylmethacrylate (HEMA) and poly(silicic acid)s were prepared and characterized. The molecular architecture of the inorganic phase was studied with ²⁹Si NMR spectroscopy, and the effect of acid concentration and reaction time on the properties of poly(silicic acid) were elucidated. Interactions between phases were studied with NMR spectroscopy and gel permeation chromatography, and the coexistence and connectivity of the two phases were investigated. Contrary to previous assumptions, evidence was found that indicated that the organic and inorganic phases of this class of sol–gel materials were not covalently linked. The curing process was studied by infrared spectroscopy, by which the disappearance of terminal double bonds of HEMA monomer were monitored. Thermogravimetric analysis profiles showed that the inorganic phase content was about 10 wt %, and it was varied slightly by changes in the molar ratio of the components. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1342–1352, 2001     

Block copolymers of thiophene-capped poly(methyl methacrylate) with pyrrole

Poly(methyl methacrylate) with a thiophene end group having narrow polydispersity was prepared by the Atom Transfer Radical Polymerization (ATRP) technique. Subsequently, electrically conducting block copolymers of thiophene-capped poly(methyl methacrylate) with pyrrole were synthesized by using p-toluene sulfonic acid and sodium dodecyl sulfate as the supporting electrolytes via constant potential electrolysis. Characterization of the block copolymers were performed by CV, FTIR, SEM, TGA, and DSC analyses. Electrical conductivities were evaluated by the four-probe technique. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4218–4225, 1999     

悬浮聚合制备大粒径磁性聚甲基丙烯酸甲酯微珠: 反应参数对微珠粒径的影响

采用低速搅拌悬浮聚合制得了一系列磁性聚甲基丙烯酸甲酯(PMMA)微珠. 分别以聚乙烯醇(PVA 1788)和碱式碳酸镁作为稳定剂和助分散剂, Fe3O4磁流体为磁性物质, 双甲基丙烯酸甲酯为交联剂. 所有粒子的直径在1～3 mm 范围内, 微球的粒径及其分布可以通过改变聚合反应介质来进行调节. 着重研究了反应体系中电解质的用量、聚合反应温度、水油比、碱式碳酸镁及交联剂的用量等反应参数对微球粒径的影响. 利用振动探针式磁强计(VSM)和原子吸收光谱(AAS)分别对磁性PMMA微珠的超顺磁性和Fe3O4含量进行了表征.     

Characterization and degradation of the poly(methylphenylsiloxane)–poly(methyl methacrylate) graft copolymer

Poly(methylphenylsiloxane)–poly(methyl methacrylate) graft copolymers (PSXE-g-PMMA) were prepared by condensation reaction of poly(methylphenylsiloxane)-containing epoxy resin (PSXE) with carboxyl-terminated poly(methyl methacrylate) (PMMA), and they were characterized by gel permeation chromatography (GPC), infrared (IR), and ²⁹Si and ¹³C nuclear magnetic resonance (NMR). The microstructure of the PSXE-g-PMMA graft copolymer was investigated by proton spin–spin relaxation T₂ measurements. The thermal stability and apparent activation energy for thermal degradation of these copolymers were studied by thermogravimetry and compared with unmodified PMMA. The incorporation of poly(methylphenylsiloxane) segments in graft copolymers improved thermal stability of PMMA and enhanced the activation energy for thermal degradation of PMMA. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2521–2530, 1998     

Poly(methyl methacrylate)/silica/titania ternary nanocomposites with greatly improved thermal and ultraviolet-shielding properties

Poly(methyl methacrylate) (PMMA)/silica/titania ternary nanocomposites with covalent bonding interaction between polymer and inorganic phases have been prepared using a novel non-hydrolytic sol-gel method. Transmission electron microscope (TEM) image of silica/titania binary inorganic component indicates a core-shell-like structure. Scanning electron microscope (SEM) images suggest that the well dispersed silica/titania particles in the hybrid are on the nanometer-scale. The transparencies of nanocomposites are maintained in visible region while the absorption band in ultraviolet (UV) region is red shifted with increasing inorganic content. The thermogravimetric analysis (TGA) results show that the thermal stability of PMMA copolymer increases dramatically with the addition of silica/titania moieties both in nitrogen and in air.     

Characterization and degradation of poly(methylphenylsiloxane)–poly(methyl methacrylate) interpenetrating polymer networks

Poly(methylphenylsiloxane)–poly(methyl methacrylate) interpenetrating polymer networks (PMPS–PMMA IPNs) were prepared by in situ sequential condensation of poly(methylphenylsiloxane) with tetramethyl orthosilicate and polymerization of methyl methacrylate. PMPS–PMMA IPNs were characterized by infrared (IR), differential scanning calorimetry (DSC), and ²⁹Si and ¹³C nuclear magnetic resonance (NMR). The mobility of PMPS segments in IPNs, investigated by proton spin–spin relaxation T₂ measurements, is seriously restricted. The PMPS networks have influence on the average activation energy E_a,av of MMA segments in thermal degradation at initial conversion. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1717–1724, 1999     

Thermally stable,photoactive polymerizable diazenes. Applications in polymer technology

New and useful nonpolymerizable and polymerizable diazene free radical initiators have been designed, based on molecular orbital and empirical linear free energy calculations. The design of the polymerizable diazenes has been based on four requirements: independent reactivities of azo and vinyl moieties, high thermal stability of the trans-diazene isomers, efficient convertability of the trans isomer to the cis isomer, and high thermal reactivity (to produce free radicals) of the cis-diazene isomers. The cis-diazene isomers are obtained from the trans isomers by irradiation with visible light. A new free radical initiator has been shown to be useful in preparing graft copolymers and in crosslinking polymer chains by visible light activation. Poly(styrene-co-2-(meta-styrylazo)-2-methoxypropane) (2) was prepared by the copolymerization of styrene monomer and 2-(meta-styrylazo)-2-methoxypropane (1), either thermally or via a free radical initiator. Copolymer 2 then was reacted with methyl methacrylate monomer in the presence of visible light, to produce poly (styrene-g-methyl methacrylate) (6). Poly(styrene-co-2-(meta-styrylazo)-2-methylpropane) (17), prepared by the copolymerization of styrene monomer and 2-(meta-styrylazo)-2-methylpropane (15), was successfully crosslinked at elevated temperatures. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3203–3213, 1999     

Organic–inorganic hybrid materials. V. Dynamics and degradation of poly(methyl methacrylate) silica hybrids

Poly(methyl methacrylate)–silica hybrid materials (PMMA–SiO₂) were prepared by in situ polycondensation of alkoxysilane in the presence of trialkoxysilane‐functional PMMA. Infrared, differential scanning calorimetry, ²⁹Si and ¹³C nuclear magnetic resonance spectroscopy, and thermogravimetric analysis were used to study the PMMA–SiO₂ hybrids. The effects of the content and kind of the alkoxysilane on the dynamics and stability of the PMMA–SiO₂ hybrids were investigated in this study.The dynamics of SiO₂within hybrids were investigated with ²⁹Si–¹H cross‐polarization. The spin‐diffusion path length was on a nanometer scale estimated with the spin–lattice relaxation time in the rotating frame (T). The apparent activation energies for the degradation of the hybrids under air and nitrogen were evaluated by the van Krevelen method. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1972–1980, 2000     

Polymerization of methyl methacrylate using a metallocene catalyst system

Methyl methacrylate was polymerized with Cp₂YCl(THF) or IVB group metallocene compounds (i.e., Cp₂ZrCl₂ and Cp₂HfCl₂, etc.), in the presence of a Lewis acid like Zn(C₂H₅)₂. The Lewis acid was complexed with methyl methacrylate, which avoided the metallocene compounds being poisoned with a functional group. A living polymerization was promoted through the use of metallocene/MAO/Zn(C₂H₅)₂, which gave tactic poly(methyl methacrylate) with a high molecular weight. The polymer yield increases with polymerization time, which indicates that the propagation rate is zero in order in the concentration of the monomer. The polymer yield increases also with the concentration of Cp₂YCl(THF), which indicates the yttrocene to be the real catalyst. When the polymerization temperature exceeds room temperature, the poly(methyl methacrylate) cannot be synthesized by the Cp₂YCl(THF) catalyst. When the reaction temperature reachs −60 °C, the poly(methyl methacrylate) is high syndiotatic and molecular weight by the Cp₂YCl(THF)/MAO catalyst system. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1184–1194, 2000