Preparation and Thermal Chemical Property of Complexes of Zinc Nitrate with Trytophan

IntroductionZincisanessentialtraceelementtothelife .Manydiseasesarousedfromadeficiencyofzincelementhavere ceivedconsiderableattention .L α Aminoacidsarebasicunitsofproteins .L α Trytophanisoneoftheeightspeciesofaminoacidsindispensableforlife ,whichhastobeab sorbedfromfoodbecauseitcannotbesynthesizedinthehumanbody .InviewofthecomplexesofL α trytophanandessentialelementsasaddictiveswidelyusedinsuchfieldsasfoodstuff,medicineandcosmetic ,1 3theyhaveabroadenprospectforapplications .Briefly ,ab…     

Enthalpic characterisation of activated carbon monoliths obtained from lignocellulosic materials

In this study, energetic interactions between activated carbon monoliths and various liquids were evaluated by determining immersion enthalpies in C₆H₆, H₂O and aqueous solutions of NaOH and HCl. Immersion enthalpies depend on both the surface chemistry and the interactions between specific groups, and were compared with results from volumetric titrations. Immersion enthalpies of activated carbon monoliths were between ?95.85 and ?176.5 J g^?1 for C₆H₆ and between ?11.19 and ?68.31 J g^?1 for H₂O; whereas immersion enthalpies in NaOH and HCl solutions were between ?20.36 and ?82.25 J g^?1 and ?18.81 and ?96.16 J g^?1, respectively. In support of these results, a high level of acidic groups was found on the surface of the activated carbon monoliths by Boehm volumetric titrations, with values between 719 and 1,290 g mol^?1, in agreement with the higher immersion enthalpies observed in NaOH. Correlations were established between immersion enthalpies in the liquids and the surface chemistry properties of the activated carbon monoliths determined by volumetric titrations, demonstrating that immersion enthalpy is a useful parameter for characterisation of these materials in specific liquids.     

Relation between immersion enthalpies of activated carbons in different liquids,textural properties,and phenol adsorption

The immersion enthalpies in benzene, cyclohexane, water, and phenol aqueous solution with a concentration of 100 mg L^?1 are determined for eight activated carbons obtained from peach seeds (Prunus persica) by thermal activation with CO₂ at different temperatures and times of activation. The results obtained for the immersion enthalpy show values between ?4.0 and ?63.9 J g^?1 for benzene, ?3.0 and ?47.9 J g^?1 for cyclohexane, ?10.1 and ?43.6 J g^?1 for water, and ?11.1 and ?45.8 J g^?1 for phenol solution. From nitrogen adsorption isotherms, the surface area, micropore volume, and average pore diameter of the activated carbons were obtained. These parameters are related with the immersion enthalpies, and the obtained trends are directly proportional with two first parameters in the nonpolar solvents, which is a behavior of microporous activated carbons with hydrophobic character. Phenol adsorption from aqueous solution on activated carbons is proportional to their surface area and their immersion enthalpy in the solution.     

1，1－二氨基2，2－二硝基乙烯（DADE）的热化学性质、热行为和热分解机理

The constant-volume combustion energy, △cU （DADE, s, 298.15 K）, the thermal behavior, and kinetics and mechanism of the exothermic decomposition reaction of 1,1-diamino-2,2-dinitroethylene （DADE） have been investigated by a precise rotating bomb calorimeter, TG-DTG, DSC, rapid-scan fourier transform infrared （RSFT-IR） spectroscopy and T-jump/FTIR, respectively. The value of △cHm （DADE, s, 298.15 K） was determined as （-8518.09±4.59） j·g^-1. Its standard enthalpy of combustion, △cU （DADE, s, 298.15 K）, and standard enthalpy of formation, △fHm （DADE, s, 298.15 K） were calculated to be （-1254.00±0.68） and （- 103.98±0.73） kJ·mol^-1, respectively The kinetic parameters （the apparent activation energy Ea and pre-exponential factor A） of the first exothermic decomposition reaction in a temperature-programmed mode obtained by Kissinger＇s method and Ozawa＇s method, were Ek=344.35 kJ·mol^-1, AR= 1034.50 S^-1 and Eo=335.32 kJ·mol^-1, respectively. The critical temperatures of thermal explosion of DADE were 206.98 and 207.08 ℃ by different methods. Information was obtained on its thermolysis detected by RSFT-IR and T-jump/FTIR.     

Zur Kalorimetrischen Messung der Mischungsenthalpie oxidischer Mischkristalle

On the Calorimetrie Measurement of the Enthalpy of Mixing of Oxidic Mixed Crystals Using the technique of oxide melt solution calorimetry a method has been developed to measure the enthalpy of mixing of solid solutions in oxide systems. A solid solution and the corresponding mixture of its components are simultaneously dissolved in separate lead borate (2PbO · B₂O₃) melts. The difference of the thermal effects which accompany the dissolution processes is measured in a differential calorimeter, and the value of the enthalpy of mixing is thereby obtained. The suitability of the method was demonstrated by carrying out test measurements in the quasi-binary system MgFe₂O₄? ZnFe₂O₄ at 973 ± 2K, the value of the molar enthalpy of mixing being established as a function of the composition.     

Thermochemistry on the Complex of Erbium Perchlorate with L-α-Glutamic Acid [Er2（L-Glu）2（H2O）6]（ClO4）4·6H2O（s）

A coordination compound of erbium perchlorate with L-α-glutamic acid, [Er2（Glu）2（H2O）6]（ClO4）4·6H2O（s）, was synthesized. By chemical analysis, elemental analysis, FTIR, TG/DTG, and comparison with relevant literatures, its chemical composition and structure were established. The mechanism of thermal decomposition of the complex was deduced on the basis of the TG/DTG analysis. Low-temperature heat capacities were measured by a precision automated adiabatic calorimeter from 78 to 318 K. An endothermic peak in the heat capacity curve was observed over the temperature region of 290-318 K, which was ascribed to a solid-to-solid phase transition. The temperature Ttrans, the enthalpy △transHm and the entropy △transSm of the phase transition for the compound were determined to be： （308.73±0.45） K, （10.49±0.05） kJ·mol^-1 and （33.9±0.2） J·K^-1·mol^-1. Polynomial equation of heat capacities as a function of the temperature in the region of 78-290 K was fitted by the least square method. Standard molar enthalpies of dissolution of the mixture [2ErCl3·6H2O（s）＋2L-Glu（s）＋6NaClO4·H2O（s）] and the mixture {[Er2（Glu）2（H2O）6]（ClO4）4·6H2O（s）＋6NaCl（s）} in 100 mL of 2 mol·dm^-3 HClO4 as calorimetric solvent, and {2HClO4（1）} in the solution A＇ at T=298.15 K were measured to be, △dHm,1=（31.552±0.026） kJ·mol^-1, △dHm,2 = （41.302±0.034） kJ·mol^-1, and △dHm,3 = （ 14.986 ± 0.064） kJ·mol^-1, respectively. In accordance with Hess law, the standard molar enthalpy of formation of the complex was determined as △fHm-=-（7551.0±2.4） kJ·mol^-1 by using an isoperibol solution-reaction calorimeter and designing a thermochemical cycle.     

Reduction Reaction of the Copper(II) Complex Bearing 1,3-Di(pyridine-2-carboxaldimino)propane (pitn) by Decamethylferrocene in Acetonitrile

The reduction reaction of the Cu(II)–pitn complex (pitn = 1,3-di(pyridine-2-carboxaldimino)propane) by decamethylferrocene [Fe(Cp*)₂] was examined in acetonitrile. The observed pseudo-first-order rate constants exhibited saturation kinetics with increasing excess amount of [Fe(Cp*)₂]. Detailed analyses revealed that the reaction is controlled by a structural change prior to the electron transfer step, rather than a conventional bimolecular electron transfer process preceded by ion pair (encounter complex) formation. The rate constant for the structural change was estimated to be 275 ± 13 s^?1 at 298 K (?H* = 33.3 ± 1.0 kJ·mol^?1, ?S* = 86 ± 5 J·mol^?1·K^?1), which is the fastest among gated reactions involving CuN₄ complexes. It was confirmed by EPR measurement and Conflex calculations that the dihedral angle between the two N–N planes is significantly large (40°) in solution whereas it is merely 17.14° in the crystal.     

DSC-TG studies on kinetics of curing and thermal decomposition of epoxy–ether amine systems

The cure behavior of diglycidyl ether of bisphenol A with a simple ether amine (4,7,10, trioxa -1,13, tridecane diamine), system I and a polyether amine (polypropylene glycol block polyethylene glycol block polypropylene glycol bis 2 amino propyl ether), system II was compared by Differential Scanning Calorimetry. The exothermicity of the curing reaction of system I is higher than that of system II (316 ± 15 J g^?1 for System I and 230 ± 15 J g^?1 for system II). Kinetic parameters viz., activation energy, pre-exponential factor, and rate constant for curing were evaluated by Kissinger method and Kissinger–Akahira–Sunose isoconversion method. Both systems showed low glass transition temperatures and System II shows a much lower T _g (?38 °C) than system I (26 °C). The thermogravimetric analysis of the two cured epoxy amine systems showed comparable thermal stability.     

Simultaneous thermal analysis of zirconium(IV) acetylacetonate in a helium atmosphere

TG, DTG, DTA, DDTA and ΔH analyses of zirconium(IV) acetylacetonate, Zr(C₆H₇O₂)₄ (= I), were performed in a helium atmosphere with a Netzsch Thermal Analyser STA 429. The enthalpies of the main steps of transformation were computed to be +42.182 J·g^?1 and ?21.113 J·g^?1. Pure I is thermally stable up to about 199°C in He gas, and melting too occurs at about 199°C. Four well-defined decomposition steps were observed over the range between ambient and 600 °C, accompanied by a weight loss of 61.59%. The final product contained pure ZrO. The unique shapes of the TG and DTA curves could be used for the identification of I.     

Accessible area and hydrophobicity of activated carbons obtained from the enthalpy characterization

Were determined the immersion enthalpy in benzene and water for 24 carbonaceous materials, granular activated carbon and activated carbon monoliths prepared from African palm stone by chemical activation with H₃PO₄, ZnCl₂ and CaCl₂ solutions. The immersion enthalpies in benzene and water were exothermic, in accordance with a surface process that takes place between the solid and liquid. Benzene enthalpies for this set of solids were ?20.26 and ?181.1 J g^?1 and water enthalpies were between ?7.42 and ?67.01 J g^?1. The textural and chemical surface properties of the activated carbons were related to the immersion enthalpies. Since the evaluation of the porous structure was made with non-polar liquids with which the solid does not have a specific interaction, immersion enthalpy was proportional to the surface area accessible to liquid molecules, which was calculated from the enthalpic determinations based on the assumption of the existence of a direct relationship between the immersion enthalpy and the total area of the solid accessible to liquid molecules. The hydrophobic factor was calculated by dividing the immersion enthalpy in benzene and the immersion enthalpy in water; this is related to the acidity, basicity and hydrophobicity of the activated carbons.     

RE(C5H8NS2)3(C12H8N2)的标准摩尔生成焓

在无水乙醇中, 使低水合氯化稀土 (RE = Ho, Er, Tm, Yb, Lu) 与吡咯烷二硫代氨基甲酸铵 (APDC)和1,10-菲咯啉 (o–phen•H₂O) 反应, 制得其三元固态配合物. 用化学分析和元素分析确定它的组成为RE(C₅H₈NS₂)₃(C₁₂H₈N₂) (RE = Ho, Er, Tm, Yb, Lu). IR光谱说明RE³⁺ 分别与3个PDC^–的6个硫原子双齿配位, 同时与o–phen的2个氮原子双齿配位, 配位数为8. 用精密转动弹热量计测定了它们的恒容燃烧热△_cU分别为(-16788.46 ± 7.74), (-15434.53 ± 8.28), (-15287.80 ± 7.31), (-15200.50 ± 7.22)和(-15254.34 ± 6.61) kJ•mol^-1; 并计算了它们的标准摩尔燃烧焓△_cH_m^θ和标准摩尔生成焓△_fH_m^θ分别为( -16803.95 ± 7.74), (-15450.02 ± 8.28), (-15303.29 ± 9.28), (-15215.99 ± 7.22), (-15269.83 ± 6.61) kJ • mol^-1和 (-1115.42 ± 8.94), (-2477.80 ± 9.15), (-2619.95 ± 10.44), (-2670.17 ± 8.22), (-2650.06 ± 8.49) kJ•mol^-1.     

2-氯-N,N-二甲基尼古丁酰胺的热容和热力学性质研究

Low-temperature heat capacities of 2-chloro-N,N-dimethylnicotinamide were precisely measured with a high-precision automated adiabatic calorimeter over the temperature range from 82 K to 380 K. The compound was observed to melt at （342.15±0.04） K. The molar enthalpy AfusionHm, and entropy of fusion, △fusionSm, as well as the chemical purity of the compound were determined to be （21387±7） J·mol^-1, （62.51±0.01） J·mol^-1·K^-1, （0.9946±0.0005） mass fraction, respectively. The extrapolated melting temperature for the pure compound obtained from fractional melting experiments was （342.25±0.024） K. The thermodynamic function data relative to the reference temperature 298.15 K were calculated based on the heat capacity measurements in the temperature range from 82 to 325 K. The thermal behavior of the compound was also investigated by different scanning calorimetry.     

氢过碘酸）合银（III）配离子氧化L-脯氨酸的反应动力学及机理

L-脯氨酸独有的亚胺基使其在生物医药领域具有许多独特的功能,并广泛用作不对称有机化合物合成的有效催化剂。本文在碱性介质中研究了二（氢过碘酸）合银（III）配离子氧化 L-脯氨酸的反应。经质谱鉴定,脯氨酸氧化后的产物为脯氨酸脱羧生成的 γ-氨基丁酸盐;氧化反应对脯氨酸及Ag(III) 均为一级;二级速率常数 k′ 随 [IO₄^-] 浓度增加而减小,而与 [OHˉ] 的浓度几乎无关;推测反应机理应包括 [Ag(HIO₆)₂]^5-与 [Ag(HIO₆)(H₂O)(OH)]^2-之间的前期平衡,两种Ag（III）配离子均作为反应的活性组分,在速控步被完全去质子化的脯氨酸平行地还原,两速控步对应的活化参数为： k₁ (25 ^oC)＝1.87±0.04（mol·L^-1)^-1s^-1,∆ H₁^≠＝45±4 kJ · mol^-1, ∆ S₁^≠＝-90±13 J· K^-1·mol^-1 and k₂ (25 ^oC) ＝3.2±0.5（mol·L^-1)^-1s^-1, ∆ H₂^≠＝34±2 kJ · mol^-1, ∆ S₂^≠＝-122 ±10 J· K^-1·mol^-1。本文第一次发现 [Ag(HIO₆)₂]^5-配离子也具有氧化反应活性。     

Preparation and thermal properties of fatty acids/CNTs composite as shape-stabilized phase change materials

A series of fatty acids/carbon nanotubes (CNTs) composite shape-stabilized PCMs were prepared through infiltration method by using the eutectic mixture of capric acid, lauric acid, and palmitic acid as phase change materials, multi-walled CNTs as a supporting material. Nitrogen adsorption–desorption curves and SEM images of composite shape-stabilized PCMs indicate that the eutectic mixture was effectively absorbed into the porous structure of the CNTs. DSC thermograms show that the composite fatty acids/CNTs possess good phase change behavior. And the latent heat of the sample absorbed with 80 wt% fatty acids can achieve 101.6 J g^?1 in the melting process and its phase change temperatures and latent heat almost remain unchanged in 30 times of thermal cycling. Moreover, the thermal conductivity of the composite materials are significantly improved (up to 0.6661 W m^?1 k^?1) due to the addition of the highly thermal conductive CNTs.     

Thermodynamics of solid solution formation in NiOMgO and NiOZnO

High-temperature calorimetric measurements of the enthalpies of solution in molten 2PbO · B₂O₃ of (Ni_xMg_1?x)O and (Ni_xZn_1?x)O permit the calculation of the enthalpy of the zincite to rocksalt transformation in ZnO, and the enthalpies of mixing, relative to rocksalt standard states, in the two solid solution series. The enthalpy of the zincite to rocksalt transformation is 24,488 ± 3,592 J mole^?1 with a corresponding positive entropy change of 0.48 ± 3.3 J K^?1 mole^?1. The small positive entropy change for the transformation necessitates a very flat and perhaps negative $\text{dP}\text{dT}$ slope for the phase boundary. Both solid solutions, when referred to rocksalt standard states, show negative enthalpies of mixing. For (Ni_xMg_1?x)O the negative enthalpies of mixing are fitted by a subregular model, where ΔH_mix = X_AX_B(BX_A + AX_B), with A = ?21,971 ± 4,953 J mole^?1 and B = ?5103 ± 1151 J mole^?1. The associated negative excess entropies of mixing, calculated from the heats of mixing and previously measured activity-composition relations, are similarly modeled with A = ?10.7 J K^?1 mole^?1 and B = + 1.1 J K^?1 mole^?1. Negative enthalpies of mixing in (Ni_xZn_1?x)O conform to a regular solution model with W = ?13520 ± 5581 J mole^?1. The negative enthalpies of mixing are interpreted in terms of a tendency toward ordering in the solid solutions, the proposed ordering scheme finding support in spectroscopic, structural, and magnetic data. These tendencies toward order are used to explain observed phase relations and thermodynamic properties in some other systems containing a transition metal cation and another ion of similar size, namely carbonates, hydrated sulfates and the systems CuOMO (M = Mg, Co, Ni).     

Modified surface chemistry of activated carbons

In this study, immersion calorimetry was used to characterise different samples of commercial granular activated carbon (GAC) which undergo oxidation with HNO₃ (GACOxN) and thermal treatments to modify its superficial group contents, as well as to determine the textural characteristics of the materials through nitrogen adsorption at 77 K and its superficial chemistry by Boehm titration and zero point of charge. Correlations between the immersion enthalpies and the results of the other techniques of characterisation were established. The immersion enthalpies in dichloromethane obtained were greater, which were found to be between ?88.36 and ?155.6 J g^?1, in contrast to those in carbon tetrachloride, which were found to be between ?50.21 and ?94.29 J g^?1. The dependence of the immersion enthalpies in water on the contents of total acidity and basicity surface groups was also established, and a good correlation between the accessible surface area determined by calorimetric technique and the BET area was found.     

Heat of hydration as a method for determining the composition of calcined gypsum

The heat of hydration of a fresh, locally produced sample of some industrial gypsum (plaster of Paris, CaSO₄ · 0.5 H₂O) was determined. An adiabatic calorimeter was used for this purpose. The obtained heat of hydration was ?9 cal g^?1, which is higher than that for the hemihydrate (?5 cal g^?1). The calculated heat of hydration for calcium sulphate hemihydrate from the known heats of formation, and using ordinary thermochemical equations, is ?5 cal g^?1. In the same manner, however, the calculated heat of hydration for the anhydrite (CaSO₄) is ?29 cal g^?1. The higher heat of hydration (?9 cal g^?1) for the tested sample than that for the ordinary hemihydrate (?5 cal g^?1) was attributed to the presence of a certain percent of anhydrite. The composition of the tested sample was proposed by applying conventional chemical and rational analyses. The present work suggests the use of the heat of hydration as a tool for determining the composition of calcined gypsum.     

水合烟酸铜Cu(Nic)2•H2O(s)(Nic＝烟酸)的合成、表征及热力学性质

近几十年来,烟酸盐类化合物或配合物由于优越的吸收率高和无毒副作用等特点使其在化妆品、药品和食品等领域作为营养添加剂具有重要应用前景。然而,这类化合物的基础热力学数据极其缺乏,从而限制了这类化合物的理论研究和应用开发的深入开展。为此,本论文利用室温固相合成方法和球磨技术合成了一种新化合物Cu(Nic)2•H2O(s),利用化学分析、元素分析、FTIR和X-射线粉末衍射技术表征了它的结构和组成,利用精密自动绝热热量计准确地测量了它在78-400 K温区的摩尔热容。在热容曲线的T ＝ 326-346 K温区观察到一个明显的固-液相变过程。利用相变温区三次重复实验热容的测量结果确定了此相变过程的峰温、相变焓和相变熵分别为：Tfus＝(341.290 ±0.873) K, DfusHm＝(13.582±0.012) kJ×mol-1, DfusSm＝(39.797±0.067) J×K-1×mol-1。通过最小二乘法将相变前和相变后的热容实验值分别拟合成了热容对温度的两个多项式方程。通过热容多项式方程的数值积分,得到了这个化合物的舒平热容值和相对于298.15 K的各种热力学函数值,并且将每隔5 K的热力学函数值列成了表格。     

Air Assisted Dispersive Liquid–Liquid Microextraction (AA-DLLME) Using Hydrophilic–Hydrophobic Deep Eutectic Solvents for the Isolation of Monosaccharides and Amino Acids from Kelp

Abstract

Air assisted dispersive liquid–liquid microextraction (AA-DLLME) using hydrophilic–hydrophobic deep eutectic solvents (DES) was developed for the simultaneous isolation of monosaccharides and amino acids with wide ranges of polarities from kelp using high performance liquid chromatography (HPLC). A response surface methodology (RSM) on a Box–Behnken design (BBD) model was employed to identify the optimal extraction parameters. Air assisted dispersive liquid-phase microextraction performed using the optimum deep eutectic solvent system, five push–pull cycles, a ratio of solid to liquid equal to 3?mg·mL^?1, 10% (w/v) NaCl, and a centrifugation time of 6?min provided the best analytical performance. The optimal extracted concentrations of d-(+)-galactose, l-(-)-fucose, dl-tyrosine, and dl-valine in kelp were 16.7?±?0.2, 8.6?±?0.2, 2.6?±?0.1, and 1.6?±?0.1?mg·g^?1, respectively. The method recoveries for d-(+)-galactose, l-(-)-fucose, dl-tyrosine, and dl-tyrosine were from 87 to 102%, 84 to 103%, 87 to 104%, and 85 to 103%. The relative standard deviations (RSDs) (n?=?4) for the intra-day and inter-day determinations were <6.17%.     

Crystal Structure, Lattice Energy, and Standard Molar Enthalpy of Formation of the Complex (C11H18NO)2CuCl4(s)

The complex (C₁₁H₁₈NO)₂CuCl₄ (s), which may be a potential effective drug, was synthesized. X‐ray crystallography, elemental analysis, and chemical analysis were used to characterize the structure and composition of the complex. Lattice energy and ionic radius of the anion of the complex were derived from the crystal data of the title compound. In addition, a reasonable thermochemical cycle was designed, and standard molar enthalpies of dissolution for reactants and products of the synthesis reaction of the complex were measured by an isoperibol solution‐reaction calorimeter. The enthalpy change of the reaction was calculated to be Δ_rH^?_m=(2.69±0.02) kJ·mol^?1 from the data of the above standard molar enthalpies of dissolution. Finally, the standard molar enthalpy of formation of the title compound was determined to be Δ_rH^?_m[(C₁₁ H₁₈NO)₂CuCl₄, s]= ? (1822.96±6.80) kJ·mol^?1 in accordance with Hess law.