An integrated microfluidic device for the high-throughput screening of microalgal cell culture conditions that induce high growth rate and lipid content

This study describes the development of a microfluidic device for the high-throughput screening of culture conditions, such as the optimum sodium acetate concentration for promoting rapid growth and high lipid accumulation of Chlamydomonas reinhardtii. An analysis of the microalgal growth on the microfluidic device revealed an optimum sodium acetate concentration of 5.72 g L^?1. The lipid content, determined by the 4,4-Difluoro-1,3,5,7-tetramethyl-4-bora-3a,4a-diaza-s-indacene (BODIPY® 505/515) staining method, increased with the sodium acetate concentration. The results were found to be statistically reproducible with respect to cell growth and lipid production. Other nutrient conditions, including the nitrogen and phosphorus concentrations, can also be optimized on the same microfluidic platform. The microfluidic device performance results agreed well with the results obtained from the flask-scale experiments, validating that the culture conditions were scalable. Finally, we, for the first time, established a method for the absolute quantification of the microalgal lipid content in the picoliter culture volumes by comparing the on-chip and off-chip data. In conclusion, we successfully demonstrated the high-throughput screening of sodium acetate concentrations that induced high growth rates and high lipid contents in C. reinhardtii cells on the microfluidic device.

Microalgal motility measurement microfluidic chip for toxicity assessment of heavy metals

A polydimethylsiloxane microfluidic chip has been developed for the estimation of toxic heavy metals based on measurement of mobility of marine microalgae. The chip is mainly composed of an upstream concentration gradient generator and a downstream perfusion-based chemotatic module. The processes of toxic liquid dilution and diffusion, microalgal culturing, cell stimulation, and online screening can be integrated in this chip, which makes it an attractive approach to simplify toxicity testing procedures. The microalgal motility was adopted as a microfluidic bioassay signal and was evaluated as the percentage of motile cells, curvilinear velocity, average path velocity, and straight line velocity. Two mobile marine microalgae, Platymonas subcordiformis and Platymonas helgolandica var. tsingtaoensis, were confined in the chemotatic module and stimulated by the eight concentration gradients of Cu and Cd generated by the concentration gradient generator. In all cases, a toxic response was detected (i.e., a dose-related inhibition of motility was observed). Only 1.5?h was needed to predict EC₅₀ values. Thus, the microfluidic chip developed was proved to be useful as a simple and rapid approach in heavy metal detection and might be expanded as a conventional test method in environmental toxicity assessment.     

Oil Production Towards Biofuel from Autotrophic Microalgae Semicontinuous Cultivations Monitorized by Flow Cytometry

Two microalgae species (Scenedesmus obliquus and Neochloris oleoabundans) were cultivated in closed sleeve photobioreactors in order to select the best oil producer for further large-scale open raceway pond cultivations, aiming at biofuel production. Scenedesmus obliquus reached a higher maximum biomass concentration (1.41 g l⁻¹) with a lower lipid content (12.8% w/w), as compared to N. oleoabundans [maximum biomass concentration of 0.92 g l⁻¹ with 16.5% (w/w) lipid content]. Both microalgae showed adequate fatty acid composition and iodine values as substitutes for diesel fuel. Based on these results, N. oleoabundans was selected for further open raceway pond cultivations. Under these conditions, N. oleoabundans reached a maximum biomass concentration of 2.8 g l⁻¹ with 11% (w/w) of lipid content. A high correlation between the Nile Red fluorescence intensity measured by flow cytometry and total lipid content assayed by the traditional gravimetric lipid analysis was found for both microalgae, making this method a suitable and quick technique for the screening of microalgae strains for lipid production and optimization of biofuel production bioprocesses. Medium growth optimization for enhancement of microalgal oil production is now in progress.     

Highly Valuable Polyunsaturated Fatty Acids from Microalgae: Strategies to Improve Their Yields and Their Potential Exploitation in Aquaculture

Microalgae have a great potential for the production of healthy food and feed supplements. Their ability to convert carbon into high-value compounds and to be cultured in large scale without interfering with crop cultivation makes these photosynthetic microorganisms promising for the sustainable production of lipids. In particular, microalgae represent an alternative source of polyunsaturated fatty acids (PUFAs), whose consumption is related to various health benefits for humans and animals. In recent years, several strategies to improve PUFAs’ production in microalgae have been investigated. Such strategies include selecting the best performing species and strains and the optimization of culturing conditions, with special emphasis on the different cultivation systems and the effect of different abiotic factors on PUFAs’ accumulation in microalgae. Moreover, developments and results obtained through the most modern genetic and metabolic engineering techniques are described, focusing on the strategies that lead to an increased lipid production or an altered PUFAs’ profile. Additionally, we provide an overview of biotechnological applications of PUFAs derived from microalgae as safe and sustainable organisms, such as aquafeed and food ingredients, and of the main techniques (and their related issues) for PUFAs’ extraction and purification from microalgal biomass.     

A simple,reproducible and sensitive spectrophotometric method to estimate microalgal lipids

Quantification of total lipids is a necessity for any study of lipid production by microalgae, especially given the current interest in microalgal carbon capture and biofuels. In this study, we employed a simple yet sensitive method to indirectly measure the lipids in microalgae by measuring the fatty acids (FA) after saponification. The fatty acids were reacted with triethanolamine–copper salts (TEA–Cu) and the ternary TEA–Cu–FA complex was detected at 260 nm using a UV–visible spectrometer without any colour developer. The results showed that this method could be used to analyse low levels of lipids in the range of nano-moles from as little as 1 mL of microalgal culture. Furthermore, the structure of the TEA–Cu–FA complex and related reaction process are proposed to better understand this assay. There is no special instrument required and the method is very reproducible. To the best of our knowledge, this is the first report of the use of UV absorbance of copper salts with FA as a method to estimate lipids in algal cultures. It will pave the way for a more convenient assay of lipids in microalgae and can readily be expanded for estimating lipids in other biological systems.     

The Utilization of Post-chlorinated Municipal Domestic Wastewater for Biomass and Lipid Production by <Emphasis Type="Italic">Chlorella</Emphasis> spp. Under Batch Conditions

South Africa has a rich microalgal biodiversity which has the potential to be used for renewable bio-fuel production in the region. Bioprospecting for oleaginous microalgae in KwaZulu Natal Province, South Africa, resulted in the establishment of a microalgal culture collection system for alternative energy research in the country. A potential hyper-lipid-producing Chlorella spp. strain was isolated, purified, and cultured in supplemented post-chlorinated wastewater for biomass and lipid production at the laboratory scale under batch mode. The microalgal strain was cultivated in different strengths of BG-11 media supplemented with wastewater from a local municipal domestic wastewater treatment plant. The Chlorella spp. was grown using ambient dissolved carbon dioxide in shake flasks under photosynthetically active radiation (±120 μmolm⁻²s⁻¹). Microalgal biomass and lipid productivity were monitored at 24-h intervals in the batch mode. The microalgal biomass was analyzed by direct light microscopy and indirectly by spectrophotometry at 600 nm, and the lipids were extracted and quantified. The growth rate of the Chlorella spp. was enhanced in post-chlorinated wastewater supplemented with 5 mM NaNO₃ with maximal biomass productivity. A dramatic increase in lipid yield was achieved with the post-chlorinated wastewater supplemented with 25 mM NaNO₃. Low dosages of free chlorine were found to enhance microalgal growth. These findings serve as a basis for further scale-up trials using municipal wastewater as a medium for microalgal biomass and lipid production.     

微藻脂肪合成与代谢调控

随着能源与环境问题的日益严峻,利用微藻生产生物柴油已经成为研究者们关注的焦点。与传统油料作物相比,微藻具有生长速度快、含油量高、不占用耕地等优势,是极具潜力的生物燃料生产原料。虽然许多微藻在压力条件下会在细胞内积累脂肪,特别是中性脂肪三酰甘油(TAG),它是生产生物柴油的主要原料,但目前对于微藻脂肪的合成和代谢调控还了解的很少。为了更好地理解和操纵微藻脂肪代谢以增强脂肪积累,本文综述了微藻脂肪合成与代谢调控的研究进展,包括TAG生物合成途径,提高脂肪积累的生化调控和基因工程策略,阐述了营养控制对脂肪积累的影响,总结了增强脂肪酸合成途径、增强Kennedy途径、调控TAG旁路途经、抑制脂肪合成的竞争途径、抑制脂肪的分解代谢等5种基因工程策略,同时也对微藻脂肪代谢研究的发展进行了展望。     

微藻高油脂化基因工程研究策略

石化能源危机与全球气候变化已成为人类的两大重要难题。生物柴油作为可替代普通柴油的环境友好且可再生的能源受到普遍关注。相比植物油和动物脂肪生产,藻类油脂产率高且容易培养,被认为是未来生物柴油发展的重要原料之一。通过转基因技术强化油脂代谢途径,提高富油微藻含油量,已经成为新的研究热点。已有植物研究表明,增强甘油酯酰基转移酶表达,可以提高Kennedy途径代谢中间体通量,从而增加甘油三酯(TAG)的积累。本文综述了微藻油脂代谢途径的国内外研究现状和提高油脂积累的代谢调控策略;详细阐述了基于植物油脂合成强化的成功经验,通过增强微藻Kennedy途径对提高TAG生物合成的重要作用;讨论了当前转基因微藻的遗传转化方法及其需要解决的关键性科学技术问题;分析了基因工程技术调控微藻脂类代谢途径生产高油脂的可能性,并对该研究的发展进行了展望。     

Oil Accumulation via Heterotrophic/Mixotrophic <Emphasis Type="Italic">Chlorella protothecoides</Emphasis>

Microalgal oil is a potential energy source because it can be easily converted to fatty acid methyl ester or hydrocarbon type of diesel, and it is produced with relatively higher productivity compared with oil from plants and animals. Heterotrophic growth of microalgae is superior due to its high final product concentration; however, the cost of the raw materials is unacceptable if sugar is utilized as the carbon source. The aim of this study is to optimize the lipid accumulation of Chlorella protothecoides by using carbon sources other than glucose in heterotrophic and mixotrophic cultures. Different factors such as different carbon sources, carbon to nitrogen ratio, initial pH level, salinity, and rotational speed are studied in affecting the cell growth and the oil accumulation. Our experiments revealed that the heterotrophic and mixotrophic cultures of C. protothecoides grew better than autotrophic cultures. C. protothecoides can grow on glycerol or acetate, as well as on glucose. Several stress factors were confirmed or discovered to significantly increase the lipid content of microalgae cells. The replacement of glycerol and acetate as carbon sources for microalgae cultivations provides potential for waste utilization: glycerol from biodiesel industry and acetate from biohydrogen production.     

Isolation,Identification and High-Throughput Screening of Neutral Lipid Producing Indigenous Microalgae from South African Aquatic Habitats

Exploring indigenous microalgae capable of producing significant amounts of neutral lipids through high-throughput screening is crucial for sustainable biodiesel production. In this study, 31 indigenous microalgal strains were isolated from diverse aquatic habitats in KwaZulu-Natal, South Africa. Eight superior lipid-producing strains were selected for further analysis, based on Nile red fluorescence microscopy screening. The microalgal isolates were identified to belong to the genera Chlorella, Neochloris and Chlamydomonas via morpho-taxonomic and molecular approach by 18S rRNA gene sequencing. Chlorella vulgaris PH2 had the highest specific growth rate (μ) and lowest doubling time of 0.24 day⁻¹ and 2.89 ± 0.05 day⁻¹, respectively. Chlorella vulgaris T4 had the highest biomass productivity of 35.71 ± 0.03 mg L⁻¹day⁻¹. Chlorella vulgaris PH2 had the highest lipid content of 34.28 ± 0.47 and 38 ± 9.2% (dcw) as determined by gravimetric analysis and the sulfo-phospho-vanillin (SPV) method, respectively. Chlorella vulgaris PH2 exhibited a high content of saturated fatty acids, while Chlorella sp. T4 exhibited a high total content of saturated and monounsaturated fatty acids with a low content of polyunsaturated fatty acids. The preponderance of neutral lipids suggests that Chlorella sp. T4 is a suitable candidate for biomass feedstock for biodiesel production.

     

Dielectrophoretic separation of microalgae cells in ballast water in a microfluidic chip

The composition of the ship's ballast water is complex and contains a large number of microalgae cells, bacteria, microplastics, and other microparticles. To increase the accuracy and efficiency of detection of the microalgae cells in ballast water, a new microfluidic chip for continuous separation of microalgae cells based on alternating current dielectrophoresis was proposed. In this microfluidic chip, one piece of 3‐dimensional electrode is embedded on one side and eight discrete electrodes are arranged on the other side of the microchannel. An insulated triangular structure between electrodes is designed for increasing the inhomogeneity of the electric field distribution and enhancing the dielectrophoresis (DEP) force. A sheath flow is designed to focus the microparticles near the electrode, so as to increase the suffered DEP force and improve separation efficiency. To demonstrate the performance of the microfluidic separation chip, we developed two species of microalgae cells (Platymonas and Closterium) and a kind of microplastics to be used as test samples. Analyses of the related parameters and separation experiments by our designed microfluidic chip were then conducted. The results show that the presented method can separate the microalgae cells from the mixture efficiently, and this is the first time to separate two or more species of microalgae cells in a microfluidic chip by using negative and positive DEP force simultaneously, and moreover it has some advantages including simple operation, high efficiency, low cost, and small size and has great potential in on‐site pretreatment of ballast water.     

Methods to enhance tolerances of Chlorella KR-1 to toxic compounds in flue gas

Possible methods to minimize the toxic effects of SO _x and NO _x on the growth of a highly CO₂ tolerant and fast-growing microalga, Chlorella sp. KR-1, were investigated. Maintaining the pH of the culturing media at an adequate value was quite important to enhancing the tolerances of the microalgae to SO _x and NO _x . Controlling the pH by adding an alkaline solution, using a low flow rate of gas fed to the culture, and using a high concentration of inoculating cells were effective methods to maintaining the proper pH of the culture. Controlling the pH was the most effective method but could be applied only for some specific microalgae.     

Marine Diatom, Navicula sp. Strain JPCC DA0580 and Marine Green Alga, Chlorella sp. Strain NKG400014 as Potential Sources for Biodiesel Production

Marine diatom, strain JPCC DA0580, and marine green microalga strain NKG400014 were selected as high neutral lipid-producers from marine microalgal culture collection toward biodiesel production. These strains were tentatively identified as Navicula sp. and Chlorella sp., respectively, by 18S rDNA analysis. Growth and lipid accumulation conditions of both strains were analyzed by changing nutrient concentrations in growth media and initial illuminance intensity. The highest productivity of fatty acid methyl ester (FAME) reached to 154 mg/L/week for NKG400014 and 185 mg/L/week for JPCC DA0580. Gas chromatography/mass spectrometry analysis indicates that FAME fraction from NKG400014 mainly contained 9-12-15-octadecatrienoate (C18:3) and that from JPCC DA0580 mainly contained methyl palmitate (C16:0) and methyl palmitoleate (C16:1). Furthermore, calorimetric analysis revealed that the energy content of strain was 4,233?±?55 kcal/kg (i.e., 15.9?±?0.2 MJ/kg) for NKG400014 and 6,423?±?139 kcal/mg (i.e., 26.9?±?0.6 MJ/kg) for JPCC DA0580, respectively. The value from JPCC DA0580 was equivalent to that of coal. The strains NKG400014 and JPCC DA0580 will become a promising resource that can grow as dominant species in the open ocean toward production of both liquid and solid biofuels.     

Isolation and purification of canthaxanthin from the microalga Chlorella zofingiensis by high-speed counter-current chromatography

Certain microalgae are considered to be a potential source of canthaxanthin, which possesses strong antioxidant and anticancer activities. A high-speed counter-current chromatography (HSCCC) method was developed for the separation and purification of canthaxanthin from the microalga Chlorella zofingiensis. The crude canthaxanthin was obtained by extraction with organic solvents after the microalgal sample had been saponified. Preparative HSCCC, with a two-phase solvent system composed of n-hexane-ethanol-water (10:9:1 v/v), was successfully performed yielding canthaxanthin at 98.7% purity from 150 mg of the crude extract (2.1% canthaxanthin) in a one-step separation. The recovery of canthaxanthin was 92.3%. This was the first report that canthaxanthin was successfully separated and purified from microalgae.     

Template‐Synthesized Vertical Needle Array as Injection Platform for Microalgae

Increasing numbers of studies in the past few decades have demonstrated vertically‐oriented nanoneedles arrays (NNAs) as innovative tools to interrogate and manipulate biological cells, where the needles are inserted into the cells as functional probes for high‐throughput detection and biomolecule delivery. However, majority of these studies use mammalian cells: leaving NNA application to plant cells still in its infancy and largely unexplored. This paper highlights our contributions in exploring the utility of NNAs to microalgae – a diverse group of aquatic, photosynthetic organisms studied intensively as bio‐factories for producing high‐value‐added products such as fuels and pharmaceuticals. Microalgal strain development processes have long suffered from the hard cell wall that surrounds the cell and inhibits delivery of foreign materials into the cell. Conically‐shaped, metallic NNAs were developed with template synthesis that successfully penetrate through the cell wall barrier and achieve material injection – using the widely studied model microalga, Chlamydomonas reinhardtii. Earlier works from mammalian cells are introduced and discussed to clarify the framework established in this field, while recent studies of both mammalian and microalgal cells are also referenced to examine the trends, challenges, and future perspectives of NNA application to microalgae.     

Microfluidic Microalgae System: A Review

Microalgae that have recently captivated interest worldwide are a great source of renewable, sustainable and economical biofuels. The extensive potential application in the renewable energy, biopharmaceutical and nutraceutical industries have made them necessary resources for green energy. Microalgae can substitute liquid fossil fuels based on cost, renewability and environmental concern. Microfluidic-based systems outperform their competitors by executing many functions, such as sorting and analysing small volumes of samples (nanolitre to picolitre) with better sensitivities. In this review, we consider the developing uses of microfluidic technology on microalgal processes such as cell sorting, cultivation, harvesting and applications in biofuels and biosensing.     

Improvement of size-based particle separation throughput in slanted spiral microchannel by modifying outlet geometry

The inertial microfluidic technique, as a powerful new tool for accurate cell/particle separation based on the hydrodynamic phenomenon, has drawn considerable interest in recent years. Despite numerous microfluidic techniques of particle separation, there are few articles in the literature on separation techniques addressing external outlet geometry to increase the throughput efficiency and purity. In this work, we report on a spiral inertial microfluidic device with high efficiency (>98%). Herein, we demonstrate how changing the outlet geometry can improve the particle separation throughput. We present a complete separation of 4 and 6 μm from 10 μm particles potentially applicable to separate microalgae (Tetraselmis suecica from Phaeodactylum tricornutum). Two spiral microchannels with the same cross section dimension but different outlet geometry were considered and tested to investigate the particle focusing behavior and separation efficiency. As compared with particle focusing observed in channels with a simple outlet, the particle focusing in a modified outlet geometry appears in a more successful focusing manner with complete separation. This simple approach of particle separation makes it attractive for lab-on-a-chip devices for continuous extraction and filtration of a wide range of cell/particle sizes.     

Cell culture chip using low-shear mass transport

We have developed a flow cell that allows culturing adherent cells as well as suspended cells in a stable, homogeneous, and low-shear force environment. The device features continuous medium supply and waste exchange. In this paper, a simple and fast protocol for device design, fabrication, and assembly (sealing) based on a poly(dimethylsiloxane) (PMDS)/glass slide hybrid structure is described. The cell culture system performance was monitored, and the effective shear force inside the culture well was also determined. By manipulating the device dimensions and volumetric flow rate, shear stress was controlled during experiments. Cell adhesion, growth, proliferation, and death over long-term culture periods were observed by microscopy. The growth of both endothelial and suspension cells in this device exhibited comparable characteristics to those of traditional approaches. The low-shear culture device significantly reduced shear stress encountered in microfluidic systems, allowing both adherent and suspended cells to be grown in a simple device.     

A novel high aspect ratio microfluidic design to provide a stable and uniform microenvironment for cell growth in a high throughput mammalian cell culture array

We present a high aspect ratio microfluidic device for culturing cells inside an array of microchambers with continuous perfusion of medium. The device was designed to provide a potential tool for cost-effective and automated cell culture. The single unit of the array consists of a circular microfluidic chamber 40 microm in height surrounded by multiple narrow perfusion channels 2 microm in height. The high aspect ratio (approximately 20) between the microchamber and the perfusion channels offers advantages such as localization of the cells inside the microchamber as well as creating a uniform microenvironment for cell growth. Finite element methods were used to simulate flow profile and mass transfer of the device. Human carcinoma (HeLa) cells were cultured inside the device with continuous perfusion of medium at 37 degrees C and was grown to confluency. The microfluidic cell culture array could potentially offer an affordable platform for a wide range of applications in high throughput cell-based screening, bioinformatics, synthetic biology, quantitative cell biology, and systems biology.     

A new strategy for lipid production by mix cultivation of Spirulina platensis and Rhodotorula glutinis

Mix cultivation of microalgae (Spirulina platensis) and yeast (Rhodotorula glutinis) for lipid production was studied. Mixing cultivation of the two microorganisms significantly increased the accumulation of total biomass and total lipid yield. Dissolved oxygen and medium components in the mixed fermentation medium were analyzed. Mix cultivation in monosodium glutamate wastewater was further studied. Result indicated 1,600 mg/L of biomass was obtained and 73% of COD were removed.