Bioactivity and Mechanical Properties of Polydimethylsiloxane (PDMS)-CaO-SiO2 Hybrids with Different PDMS Contents

Silica-titania and titania aerogels were prepared by supercritical drying using different solvents such as low temperature CO₂ (353 K), high temperature CO₂ (553 K), ethanol (553 K) and ethanol with zeolite (553 K) and their efficiencies for the removal of benzene from a synthetic air mixture were investigated. The aerogels obtained showed both large capacities for benzene adsorption and high photocatalytic activity for its decomposition in the adsorbed state. The degree of benzene removal by silica-titania aerogel seemed to depend on the crystallinity of the titania and was in the order low temperature CO₂ < high temperature CO₂ < ethanol = ethanol with zeolite. The amount of CO₂ liberated by the photocatalytic decomposition of benzene also followed the same sequence. Titania aerogels showed the greatest efficiency in the decomposition of benzene, while the amount of CO₂ evolved was lower than those of the silica-titania systems investigated. The adsorption capacity of benzene basically depended on the silica matrix and was not greatly influenced by the difference in the crystallinity of titania.     

Inorganic Thin Films Prepared from Soluble Powders and Their Applications

Sol-gel processing has proved to be a useful method for the preparation of a wide range of inorganic thin films. However, gelation or precipitation of coating solutions and thus limited shelf-life have been drawbacks for the industrial application of this technology.Soluble powders of various compositions can be prepared from modified metal alkoxides commonly employed in sol-gel processing. Even though these powders contain a considerable amount of organic moieties they can be stored indefinitely under ambient conditions, thus diminishing shelf life problems. Redissolution in polar organic solvents, solvent mixtures or even water yields ready-to-use coating solutions. Coating solutions for the preparation of titania (TiO₂), zirconia (ZrO₂) and lead zirconate titanate (PbTi _x Zr_1–x O₃, PZT) films have been synthesized by this method. Thickness, microstructure and properties of the resulting films can be varied by modification of the solvent, the coating procedure and thermal treatment. Inorganic thin films for various applications have been prepared.     

A Novel Electrogenerated Chemiluminescence (ECL) Sensor Based on Ru(bpy)32+‐Doped Titania Nanoparticles Dispersed in Nafion on Glassy Carbon Electrode

A novel electrogenerated chemiluminescence (ECL) sensor based on Ru(bpy)₃²⁺‐doped titania (RuDT) nanoparticles dispersed in a perfluorosulfonated ionomer (Nafion) on a glassy carbon electrode (GCE) was developed in this paper. The electroactive component‐Ru(bpy)₃²⁺ was entrapped within the titania nanoparticles by the inverse microemulsion polymerization process that produced spherical sensors in the size region of 38±3 nm. The RuDT nanoparticles were characterized by electrochemical, transmission electron and scanning microscopy technology. The Ru(bpy)₃²⁺ encapsulation interior of the titania nanoparticles maintains its ECL efficiency and also reduces Ru(bpy)₃²⁺ leaching from the titania matrix when immersed in water due to the electrostatic interaction. This is the first attempt to prepare the RuDT nanoparticles and extend the application of electroactive component‐doped nanoparticles into the field of ECL. Since a large amount of Ru(bpy)₃²⁺ was immobilized three‐dimensionally on the electrode, the Ru(bpy)₃²⁺ ECL signal could be enhanced greatly, which finally resulted in the increased sensitivity. The ECL analytical performance of this ECL sensor for tripropylamine (TPA) was investigated in detail. This sensor shows a detection limit of 1 nmol/L for TPA. Furthermore, the present ECL sensor displays outstanding long‐term stability.     

Dielectric Barrier Discharge for Ammonia Production

The leading after-treatment technology for NOx removal process in Diesel engines for stationary and mobile applications is the selective catalytic reduction of oxides of nitrogen [NOx] by ammonia [NH₃]. A novel non-thermal plasma electrode with a needle array in a dielectric barrier discharge reactor, powered by a high frequency neon transformer, is used for the thermal decomposition of solid urea [(NH₂)CO(NH₂)] to produce ammonia. The thermolysis of urea produces iso-cyanic acid [HNCO] as a byproduct, besides ammonia, which can react with water in the gas phase, thus giving carbon dioxide and more ammonia. The presence of water fed before and/or after the plasma reactor was studied to assess its effect on the amount of produced ammonia. Results clearly showed that water fed to the entrance of the reactor can efficiently promote the reaction of iso-cyanic acid to produce ammonia and this result can be improved when air is used as carrier gas for 115 V of input voltage to a neon transformer and with a gas flow rate of 4 L/min.     

Preparation and characterization of Ce-doped and Zr-doped sol–gel inks of titanium alkoxide

Inks of titanium diisopropoxide bisacetylacetonate ([(CH₃)₂CHO]₂Ti(C₅H₇O₂)₂) are suitable for the fabrication of photonic bandgap materials by direct ink writing (DIW). Using this method we are able to obtain micro-periodic titania (TiO₂) structures with high refractive index by calcining the structures built with those inks. Calcining at high temperatures causes titania grain growth and surface roughness of the structure, which has an influence over its optical properties. In order to inhibit the grain growth of titania nanocrystals when the structures are calcined, we have synthesized using the sol–gel technique titanium diisopropoxide bisacetylacetonate inks doped with Cerium (III) nitrate hexahydrate (Ce(NO₃)₃·6H₂O) and Zirconyl nitrate hydrate (ZrO(NO₃)₂·xH₂O). The grain growth process of titania powders derived from the calcined doped sol–gel inks during various heat-treatment programs has been investigated by the X-ray line-broadening analysis. It was demonstrated how the dopants reduce the grain growth of the rutile phase after heat treatment. The influence of the dopants on the rheological behaviour of doped inks were studied and compared with the undoped. The flow and oscillation curves as a function of time demonstrate that doped inks have the same rheological behaviour than undoped inks. Thermogravimetric analysis also proves that doped inks keep the same mass loss after calcination than undoped inks. These results show how doped inks can be applied for DIW in the same conditions than undoped inks with a significant reduction of titania grain growth.     

Effect of preparation of titania sol on the structure and properties of acrylic resin/titania hybrid materials

Acrylic resin/titania organic–inorganic hybrid materials were prepared by mixing titania sol produced by the sol–gel process with synthesized thermoplastic acrylic resins. The effects of the amounts of water and acid on hydrolysis and condensation of the sol–gel precursor (titanium n‐butoxide) were characterized by nuclear magnetic resonance, and their corresponding influences on the structure and properties of the hybrid films were investigated by small‐angle X‐ray scattering (SAXS), atomic force microscopy, dynamical mechanical analysis, an Instron testing machine, and ultraviolet–visible spectroscopy. SAXS indicated an open structure and nanoscale size for the titania phase of the hybrids. Higher titania content and a greater amount of water or acid in the sol–gel process resulted in titania domains that were larger size and had a more compact structure. The mechanical and UV‐shielding properties of the organic polymer obviously were improved with titania embedded. As the amount of water or acid in the sol–gel process increased, integrative mechanical properties decreased, with the amount of water having a greater impact than the amount of acid on the structure and optical properties. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3682–3694, 2004     

离子液体-水的混合溶剂中，合成条件对纳米TiO2结晶度的影响

0 Introduction Titania has been extensively used in a variety of applications such as gas sensors, dielectric ceram ics, catalysts for therm al or photoinduced processes, pho- tovoltaic solar cells, and pigm ents. One of the m ost im portant applications …     

Preparation of titania colloids by thermal hydrolysis of urea and densification behavior of the collid-derived monolithic titania gels

Hydrous titania colloids with different sizes and shapes were prepared from urea-containing TiCl₄ solutions by controlled thermal hydrolysis of urea. Very small colloidal particles (Sw=280–290 m²/g) with anatase structure were precipitated from aqueous HCl solutions of [TiCl₄] <1.0 mol/dm³ and [urea] >16.6 mol/dm³. Sols containing such colloids could be converted to translucent monolithic gels. A decrease in urea concentration ([urea]=8.3 mol/dm³) caused the production of aggregated rutile-type particles with a large aspect ratio, from which only titania powder was obtained. Heating of a monolithic gel above 500°C resulted in the accelerated densification of the gel. A highly densified titania with 96% of theoretical density was produced from the monolithic gel after heating at 700°C for 6 h.     

Sol–gel preparation and properties of hydroxypropylcellulose–titania hybrid thin films

Hydroxypropylcellulose (HPC)–titania hybrid thin films were prepared by sol–gel method where titanium tetraisopropoxide Ti(OC₃H₇ ⁱ )₄ was hydrolyzed under acidic conditions in the presence of HPC, followed by dip-coating and drying at 120 °C for 24 h. The viscosity average molecular weight of HPC was 55,000–70,000 or 110,000–150,000, and the TiO₂/(HPC + TiO₂) mass ratio ranged from 0 to 1, which was calculated on the assumption that all Ti(OC₃H₇ ⁱ )₄ is converted into TiO₂. The films were 0.35–1.0 μm thick, transparent in visible region and opaque in ultraviolet (UV) region, where the optical absorption coefficient in UV region increased with increasing titania content. The refractive index increased with increasing titania content, ranging from 1.6 to 1.8 for the hybrid thin films. The pencil hardness increased from 6B to 5H, the durability in hot water significantly increased and the contact angle of water on films increased from 35° to 89° with increasing titania content. Crack-free films could be deposited on organic polymer substrates irrespective of titania or HPC contents, where cracking did not occur at higher HPC contents even when the substrate was bent.     

Aerosol-assisted synthesis of mesoporous titania nanoparticles with high surface area and controllable phase composition

Mesoporous titania nanoparticles (denoted as MTN) with high surface area (e.g., 252 m² g⁻¹) were prepared using tetrapropyl orthotitanate (TPOT) as a titania precursor and 10–20 nm or 20–30 nm silica colloids as templates. Co-assembly of TPOT and silica colloids in an aerosol-assisted process and immediate calcination at 450 °C resulted in anatase/silica composite nanoparticles. Subsequent removal of the silica colloids from the composite by NaOH solution created mesopores in the TiO₂ nanoparticles with pore size corresponding to that of silica colloids. Effects of silica colloids’ contents on MTN porosity and crystallites’ growth at a higher calcination temperature (e.g., 1000 °C) were investigated. Silica colloids suppressed the growth of TiO₂ crystallites during calcination at a higher calcination temperature and controllable contents of the silica colloids in precursor solution resulted in various atomic ratios of anatase to rutile in the calcinated materials. The mesostructure and crystalline structure of these titania materials were characterized by transmission electron microscope (TEM), scanning electron microscope (SEM), X-ray diffraction (XRD), differential thermal analysis (DTA)-thermo-gravimetric analysis (TGA), and N₂ sorption.     

The effect of silver doping on photocatalytic properties of titania multilayer membranes

In this investigation an Ag doped titania multilayer membrane is successfully fabricated via the sol–gel processing method. The doped membrane is characterized via X-ray Diffraction and N₂-sorption techniques and the photocatalytic properties of the membrane are investigated via methyl orange degradation. The properties included high surface area (101 m²/g), small pore size (3.1 nm), and active anatase crystal phase. The prepared titania membrane has a high photocatalytic activity and decomposes methyl orange by 50% after 9 h of UV irradiation. The prepared membrane can be applied in the development of efficient photocatalytic systems for the treatment of water. Due to the high photoactivity of the prepared titania membrane, this study reveals the possibility of combining two processes for removal of organic pollutants: the photocatalytic process and the membrane separation process. In the combining process the lifetime of the membrane increases and the quality of water is enhanced.     

Preparing titania aerogel monolithic chromatography columns using supercritical carbon dioxide

The search for a method to fabricate monolithic inorganic columns has attracted significant recent attention due to their unique ability in separation applications of various biomolecules. Silica and polymer based monolithic columns have been prepared, but titania and other metal oxide monoliths have been elusive, primarily due to their fragility. This article describes a new approach for preparing nanostructured titania based columns, which offer better performance over conventional particle packed columns for separating a wide variety of biomolecules including phosphopeptides. TiO₂ monolithic aerogels were synthesized in separation columns using in situ sol‐gel reactions in supercritical carbon dioxide (scCO₂) followed by calcination, and compared to those prepared in heptanes. The characterization results show that scCO₂ is a better solvent for the sol‐gel reactions, providing lower shrinkage with the anatase TiO₂ monolith composed of nanofibers with very high surface areas. The monolithic columns show the ability to isolate phosphopeptides with little flow resistance compared to conventional titania particle based microcolumns.     

Ultra-low expansion glass from gels

Pyrolysis of mixed titanium and silicon metal halides produces a commercial glass (7.4% TiO₂) with ultra-low thermal expansion that is essentially zero over the temperature range of 0 to 300°C. A colloidal particulate gel process involving potassium silicate, titania sol and formamide gel reagent was found to produce glass compositions with similar low expansion behavior. Due to the strongly basic nature of the precursor solutions, special titania sols had to be prepared that were stable in these alkali silicate solutions. The preferred TiO₂ sols were those containing quaternary ammonium stabilizing counter-ions. These sols served not only as the source of homogeneously distributed titania, but they may also serve as nucleating species that contribute to particle growth and pore size control of the gel network. The large pore (0.3 µm) TiO₂/SiO₂ gel structures were easily dealkalized, dried and sintered to uncracked glass shapes. Plates up to 9.5 cm×6.6 cm× 0.5 cm thick and some intricate cast shapes were produced and their glass properties evaluated.     

Characterization of Titania/Silica Gel by Means of Low-Pressure Nitrogen Adsorption

Adsorbents synthesized by grafting of titania onto mesoporous silica gel surfaces at different temperatures were studied by means of nitrogen adsorption–desorption and water desorption. The pore size distribution f(R_p) of titania/silica gel depends on the titania concentration (C_TiO2) and the temperature of titania synthesis. Nonuniformity of TiO₂ phase is maximal at a low C_TiO2 value (3.2 wt.% anatase deposited at 473 K), and two peaks of the fractal dimension distribution f(D) are observed at such a concentration of titania, but at larger C_TiO2 values, only one f(D) peak is seen. More ordered filling of pores and adsorption sites by nitrogen, reflecting in the shape of adsorption energy distributions f(E) at different pressures of adsorbate, is observed for adsorbent with titania (rutile+anatase) grafted on silica gel at a higher temperature (673 K).     

The influence of methacryloxypropyltrimethoxysilane on the sol-gel process of TEOS

The influence of MPS on the hydrolysis and condensation process of TEOS is studied by means of hydrolysis time (t _H) and gelation time (t _G) curves. The addition of MPS to a mixture of TEOS, ethanol and water results in a substantial increase in t _G. The increase is most pronounced when adding takes place in the acid step of the sol-gel process of TEOS.In acid environment hydrolysis of MPS will be dominant compared to hydrolysis of TEOS. This results in an effective decrease of the amount of water available for the hydrolysis of TEOS. However, this decrease in water concentration cannot explain the complete effect of the addition of MPS. The hydrolysed MPS will also be incorporated in the gel network and will strongly influence the cross-linking ability. The lesser functionality of MPS compared to TEOS and the steric hindrance of the acrylate group results in a large increase in t _G.     

A Novel Route to the Synthesis of Mesoporous Titania with Full Anatase Nanocrystalline Domains

A porous, high surface area TiO₂ with anatase or rutile crystalline domains is advantageous for high efficiency photonic devices. Here, we report a new route to the synthesis of mesoporous titania with full anatase crystalline domains. This route involves the preparation of anatase nanocrystalline seed suspensions as the titania precursor and a block copolymer surfactant, Pluronic P123 as the template for the hydrothermal self-assembly process. A large pore (7–8 nm) mesoporous titania with a high surface area of 106–150 m²/g after calcination at 400°C for 4 h in air is achieved. Increasing the hydrothermal temperature decreases the surface area and creates larger pores. Characteristics of the seed precursors as well as the resultant mesoporous titania powder were studied using XRD analysis, N₂-adsorption/desorption analysis, and TEM. We believe these materials will be especially useful for photoelectrochemical solar cell and photocatalysis applications.     

Advances of Metal‐Organic Frameworks in Energy and Environmental Applications

Nowadays, energy shortage and environmental pollution issues are increasingly severe and urgent to be solved. The effective storage and use of environmentally friendly fuels and removal of harmful gases from the environment are great challenges and of great importance both for the environment protection and for human health. Porous metal‐organic frameworks (MOFs) are highly ordered crystalline materials formed by the self‐assembly process of metal ions and organic ligands. Their good features such as ultrahigh porosity, large surface area, structural diversity and functionalities make them promising candidates for applications in energy and environmental fields. MOF thin films and MOF composites have also been investigated to further enhance the properties and introduce new functionalities. This review provides an overview of the synthesis methods of pristine MOFs, MOF thin films and MOF composites, and significant advances of MOFs in energy and environment applications such as energy storage (H₂, CH₄), CO₂ capture and separation, adsorption removal and sensing of harmful gases in the environment.     

废水生物脱氮工艺中N2O排放数学模型研究进展

N_2O是一种重要的温室气体,而污水生物脱氮处理过程是N_2O的潜在产生源之一。随着污水处理量和处理程度的不断提高,N_2O的排放量也将不断增大。建立N_2O排放数学模型对污水生物脱氮系统中N_2O生成机制的深入研究和污水处理行业N_2O削减工艺技术的开发具有重大的理论及实践意义。本文归纳了生物脱氮工艺的原理,系统阐述了生物脱氮工艺中N_2O的生成机理和排放数学模型的类型、建立方法及应用情况。在此基础上,对生物脱氮工艺中N_2O排放数学模型的研究现状和研究方向进行了总结和展望,以期为N_2O排放数学模型的完善、N_2O排放量的削减、污水生物脱氮工艺的优化及污水处理行业的可持续发展提供理论基础和科学依据。     

Degradation and adsorption of rhodamine B and phenol on TiO<Subscript>2</Subscript>/MCM-41

TiO₂/MCM-41 composites with various titania content were prepared by loading titania into the mesopores of MCM-41 molecular sieves by sol-gel method, and were used as photocatalysts to degrade Rhodamine B (RhB) and phenol. The efficiency of organic contaminants removal was increased significantly compared with pure TiO₂. Ti/Si ratio, namely, the content of TiO₂ was determined by ICP-AES method. TiO₂/MCM-41 composites were characterized by X-ray diffraction, UV-Vis absorption spectroscopy and N₂ adsorption techniques. Experimental results demonstrated that most of the RhB was adsorbed instead of being degradated by TiO₂/MCM-41 due to the large specific surface area of MCM-41, while most of phenol was degradated. It turned out that the TiO₂/MCM-41 with the highest Ti/Si ratio of 0.8220 (wt) had the highest catalytic activity.     

Fabrication of silica-on-titania and titania-on-silica nanoparticle assemblies

Structures of silica particles on a titania surface and titania particles on a silica surface were formed by deposition of SiO₂ or TiO₂ nanoparticles on pre-patterned substrates. Photolithography was used to create a matrix for the selective deposition of nanoparticles by immersion in a colloidal suspension. Atomic force microscopy was used to investigate the topography of these inorganic assemblies. Whereas two-dimensional colloidal patches of TiO₂ nanoparticles are obtained on silica surfaces, SiO₂ nanoparticles form three-dimensional, U-shaped channels on titania surfaces.The influence of electrostatic forces on assembly structure is vital. The isoelectric points of the particles, the pre-patterned matrix and the photo-resist are key parameters and may be manipulated to achieve various microstructures. The 2D nanoparticle arrays of titania on silica and 3D channels (built of silica nanoparticles) on flat titania surfaces are of potential interest in lab-on-a-chip applications.