Oxidation temperature dependent optical properties of bismuth oxide thin films: Effect of vapour chopping and air exposure

The optical properties of vapour chopped and nonchopped bismuth oxide thin films of two thicknesses 1500 Å and 2000 Å have been studied. The films were prepared by thermal oxidation in air; of vacuum evaporated vapour chopped and nonchopped bismuth thin films. As revealed by XRD studies, multiphase and polycrystalline bismuth oxide thin films were obtained. The refractive index was found to increase with the thickness and exposure to air for 40 days. The vapour chopped films showed higher refractive index, band gap and lower grain size than those of nonchopped films. The films showed high transmittance in the visible spectrum. The ageing effect on the vapour chopped films was found low.     

Influence of temperature annealing on optical properties of SrTiO3/BaTiO3 multilayered films on indium tin oxide

We have prepared SrTiO₃/BaTiO₃ thin films with multilayered structures deposited on indium tin oxide (ITO) coated glass by a sol-gel deposition and heating at 300-650 °C. The optical properties were obtained by UV-vis spectroscopy. The films show a high transmittance (approximately 85%) in the visible region. The optical band gap of the films is tunable in the 3.64-4.19 eV range by varying the annealing temperature. An abrupt decrease towards the bulk band gap value is observed at annealing temperatures above 600 °C. The multilayered film annealed at 650 ° C exhibited the maximum refractive index of 2.09-1.91 in the 450-750 nm wavelength range. The XRD and AFM results indicate that the films annealed above 600 ° C are substantially more crystalline than the films prepared at lower temperatures which were used to change their optical band gap and complex refractive index to an extent that depended on the annealing temperature.     

Structure and optical properties of chemically synthesized titanium oxide deposited by evaporation technique

Titanium oxide inorganic ion exchange material was synthesized by hydrolysis with water and ammonia solution. Structural feature of the synthesized titanium oxide was analyzed using X-ray diffraction, X-ray fluorescence and infrared spectrometer technique. Tentative formula of titanium oxide was determined and written as TiO₂·0.58H₂O. Titanium oxide films were deposited on glass substrates by means of an electron beam evaporation technique at room temperature from bulk sample. The films were annealed at 250, 350, 450, and 550 °C temperatures. Transmittance, reflectance, optical energy gap, refractive index and extinction coefficient were investigated. The transmittance values of 85% in the visible region and 88% in the near infrared region have been obtained for titanium oxide film annealed at 550 °C. Kubelka-Munk function was used to evaluate the absorption coefficient which was used to determine the optical band gap. It was found that the optical band gap increases with increasing annealing temperature whereas the refractive index and extinction coefficient decreases.     

Optical Characterization of rf-Magnetron Sputtered Nanostructured SnO2 Thin Films

Tin oxide （Sn02 ） thin films are deposited by rf-magnetron sputtering and annealed at various temperatures in the range of 100-500 ℃ for 15 min. Raman spectra of the annealed films depict the formation of a small amount of SnO phase in the tetragonal Sn02 matrix, which is verified by x-ray diffraction. The average particle size is found to be about 20-30 nm, as calculated from x-ray peak broadening and SEM images. Various optical parameters such as optical band gap energy, refractive index, optical conductivity, carrier mobility, carrier concentration etc. are determined from the optical transmittance and reflectance data recorded in the wavelength range 250-2500 nm. The results are analyzed and compared with the data in the literature.     

Analysis of codeposited Gd2O3/SiO2 composite thin films by phase modulated spectroscopic ellipsometric technique

Tailoring of the refractive index of optical thin films has been a very fascinating as well as challenging topic for developing new generation optical coatings. In the present work a novel Gd₂O₃/SiO₂ composite system has been experimented and probed for its superior optical properties through phase modulated spectroscopic ellipsometry, spectrophotometry and atomic force microscopy. The optical parameters of the composite films have been evaluated using Tauc-Lorentz (TL) formulations. In order to derive the growth dependent refractive index profiles, each sample film has been modeled as an appropriate multilayer structure where each sub-layer was treated with the above TL parameterizations. All codeposited films demonstrated superiority with respect to the band gap and morphological measurements. At lower silica mixing compositions such as in 10-20% level, the composite films depicted superior spectral refractive index profile, band gap as well as the morphology. This aspect highlighted the fact that microstructural densifications in composite films can override the chemical compositions while deciding the refractive index and optical properties in such thin films.     

Determination of Thickness and Optical Constants of ZnO Thin Films Prepared by Filtered Cathode Vacuum Arc Deposition

ZnO thin films are prepared on glass substrates by filtered cathode vacuum arc （FCVA） deposition technique. A new method is demonstrated to extract the refractive index, thickness and optical band gap of ZnO thin films from the transmission spectrum alone. The refractive index is calculated from the extremes of the interference fingers. The transmission spectrum is divided into two terms, non-interference term and interference effect term. The thickness of thin films is calculated by simulating the interference term, and the non-interference term is used to calculate optical band gap with the gained thickness. The results are compared with measurements by using an ellipsometry and a scanning electron microscope.     

Effect of indium incorporation on the optical properties of spray pyrolyzed Cd0.22Zn0.78S thin films

In this study, effect of indium incorporation on the optical properties is investigated for the spray pyrolyzed onto glass substrates at 275°C substrate temperature undoped and indium doped Cd_0.22Zn_0.78S thin films. The average optical transmittance of all the films was over 77% in the wavelength range between 450 and 800 nm. The optical band gap energies of the thin films have been investigated by the measurement of the optical absorbance as a function of wavelength. The optical absorption studies reveal that the transitions are direct band gaps of 3.02 and 3.05 eV for undoped and doped indium Cd_0.22Zn_0.78S thin films, respectively. The Urbach tail parameter and optical constants such as refractive index, extinction coefficient, and dielectric constants were calculated for these films. The dispersion parameters such as single-oscillator energy and dispersive energy were discussed in terms oft he single-oscillator Wemple—DiDomenico model.     

Nanocrystalline formation and optical properties of germanium thin films prepared by physical vapor deposition

Amorphous and nanocrystalline germanium thin films were prepared on glass substrates by physical vapor deposition (PVD). The influence of thermal annealing on the characteristics of the Ge thin films has been investigated. X-ray diffraction (XRD) and SEM show amorphous structure of films deposited at room temperature. After thermal annealing, the crystallinity was improved when the annealing temperature increases. The Ge thin films annealed at different temperatures in air were nanocrystalline, having the face-centered cubic structure with preferred orientation along the 〈1 1 1〉 direction. The nanostructural parameters have been evaluated by using a single-order Voigt profile analysis. Moreover, the analysis of the optical transmission and reflection behavior was carried out. The values of direct and indirect band gap energies for amorphous and nanocrystalline phases are 0.86±0.02, 0.65±0.02 and 0.79±0.02, 0.61±0.02 eV, respectively. In addition, the complex optical functions for the wavelength range 600-2200 nm are reported. The refractive index of the nanocrystalline phase drops from 4.80±0.03 to 2.04±0.02, and amorphous phase changes from 5.18±0.03 to 2.42±0.02 for the whole wavelength range. The dielectric functions ε₁ and ε₂ of the deposited films were recorded as a function of wavelength within the range from 600 to 2200 nm.     

Preparation and characterization of electrodeposited Sb2Se3 thin films from non-aqueous media

Semiconducting Sb₂Se₃ thin films have been prepared onto the stainless steel and fluorine doped tin oxide coated glass substrates from non-aqueous media using an electrodeposition technique. The electrodeposition potentials for different bath compositions and concentrations of solution have been estimated from the polarization curves. SbCl₃ and SeO₂ in the volumetric proportion as 1:1 with their equimolar solution concentration of 0.05 M form good quality films. The films are characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD) and optical absorption techniques. The SEM studies show that the film covers the total substrate surface with uneven surface morphology. The XRD patterns of the films obtained by varying compositions and concentrations show that the as-deposited films are polycrystalline with relatively higher grain size for 1:1 composition and 0.05 M concentration. The optical band gap energy for indirect transition in Sb₂Se₃ thin films is found to be 1.195 eV.     

Structural and optical properties of thermally evaporated 2-(2,3-dihydro-1,5-dimethyl-3-oxo-2-phenyl-1H-pyrazol-4-ylimino)-2-(4-nitrophenyl)acetonitrile thin films

The structural and optical properties of as-deposited and γ-rays irradiated 2-(2,3-dihydro-1,5dimethyl-3-oxo-2-phenyl-1H-pyrazol-4-ylimino)-2-(4-nitrophenyl)acetonitrile (DOPNA) thin films have been reported. The structural properties of as-deposited and γ-rays irradiated DOPNA thin films are characterized by Fourier transformation infrared, X-ray diffraction and transmission electron microscope techniques. The transmittance, T(λ), and reflectance, R(λ), are measured at the normal incidence of light by a double beam spectrophotometer in the wavelength range 200-2200 nm. The refractive and absorption indices have been calculated. The dispersion parameters such as dispersion energy, oscillator energy and dielectric constant at high frequency are evaluated. The data of the absorption coefficient are analyzed in order to determine the type of inter-band electronic transitions and the optical band gap of the films. Other optical absorption parameters, namely, the extinction molar coefficient, oscillator strength and the electric dipole strength, are also calculated.     

Optical properties of ZnO related to the dc sputtering power

Zinc oxide thin films were sputter deposited on (100) silicon substrates at 250 ^○C substrates temperature via reactive unbalanced dc magnetron process using pure zinc target and argon/oxygen gases. The influence of the applied dc sputtering power (between 100 to 250 Watts, step 50 Watts) on the optical properties of the grown films was systematically investigated by variable angle of incidence spectroscopic ellipsometry (VASE) technique. The refractive indices were found to follow the second-order Sellmeier dispersion relation. However, Cauchy-like dispersion model was formulated to account for the absorption tail and excitonic structure near the direct band gap. The optical properties such as refractive indices, extinction coefficients, optical band gaps, Urbach's energies, excitonic binding structure and absorption coefficients of the grown films were reported as a function of dc power in the photon energy range between 1.2 eV and 4.2 eV. The films were found to be polycrystalline with (002) preferred orientation.     

Optimization of the optical and electrical properties of electron beam evaporated aluminum-doped zinc oxide films for opto-electronic applications

Aluminum-doped zinc oxide (AZO) thin films have been deposited by electron beam evaporation technique on glass substrates. The structural, electrical and optical properties of AZO films have been investigated as a function of annealing temperature. It was observed that the optical properties such as transmittance, reflectance, optical band gap and refractive index of AZO films were strongly affected by annealing temperature. The transmittance values of 84% in the visible region and 97% in the NIR region were obtained for AZO film annealed at 475 °C. The room temperature electrical resistivity of 4.6×10⁻³ Ω cm has been obtained at the same temperature of annealing. It was found that the calculated refractive index has been affected by the packing density of the thin films, whereas, the high annealing temperature gave rise to improve the homogeneity of the films. The single-oscillator model was used to analyze the optical parameters such as the oscillator and dispersion energies.     

Influence of Al doping on microstructure,morphology, optical and photoluminescence properties of pyrolytic ZnO thin films prepared in an ambient atmosphere

Zinc oxide (ZnO) and aluminium (Al) doped zinc oxide (AZO) thin films have been fabricated by spray pyrolysis technique in normal atmospheric condition. Samples of different Al-concentrations (0–5% Al) were deposited at 350 °C onto glass substrate to study the structural, morphological, optical and photoluminescence properties. X-ray diffraction study confirms that the films are polycrystalline having hexagonal structure. SEM images show that the films have rope and tube like morphology. Optical properties, such as transmittance, optical band gap, extinction coefficient, refractive index, optical conductivity, dielectric constants and electron energy loss functions were analyzed and discussed. Results show that the optical parameters have been changed significantly with Al-doping concentration. The photoluminescence spectra indicate that the PL peaks originated from deep level emissions (DLE) with different intensities for ZnO and Al-doped ZnO films.     

Electrical and optical properties of silver doped indium oxide thin films prepared by reactive DC magnetron sputtering

Silver doped indium oxide (In_2−x Ag_x O_3−y) thin films have been prepared on glass and silicon substrates at room temperature (300 K) by reactive DC magnetron sputtering technique using an alloy target of pure indium and silver (80: 20 atomic %. The magnetron power (and hence the metal atom sputter flux) is varied in the range 40-80 W. The energy dispersive analysis of X-ray (EDAX) results show that the silver content in the film decreases with increasing magnetron power. The grain size of these films is of the order of 100 nm. The resistivity of these films is in the range 10⁻²-10⁻³ Ω cm. The work function of the silver-indium oxide films (by Kelvin Probe) are in the range: 4.64-4.55 eV. The refractive index of these films (at 632.8 nm) varies in the range: 1.141-1.195. The optical band gap of indium oxide (3.75 eV) shrinks with silver doping. Calculations of the partial ionic charge (by Sanderson's theory) show that silver doping in indium oxide thin films enhance the ionicity.     

Influence of annealing temperature on optical properties of zinc oxide thin films analyzed by spectroscopic ellipsometry method

Zinc oxide (ZnO) thin films were sol–gel spin coated on glass substrates, annealed at various temperatures 300 °C, 400 °C and 500 °C and characterized by spectroscopic ellipsometry method. The optical properties of the films such as transmittance, refractive index, extinction coefficient, dielectric constant and optical band gap energy were determined from ellipsometric data recorded over the spectral range of 300–800 nm. The effect of annealing temperature in air on optical properties of the sol–gel derived ZnO thin films was studied. The transmission values of the annealed films were about 65% within the visible range. The optical band gap of the ZnO thin films were measured between 3.25 eV and 3.45 eV. Also the dispersion parameters such as single oscillator energy and dispersive energy were determined from the transmittance graph using the Wemple and DiDomenico model.     

Derivation of the optical constants of spin coated CeO2-TiO2-ZrO2 thin films prepared by sol-gel route

Ternary thin films of cerium titanium zirconium mixed oxide were prepared by the sol-gel process and deposited by a spin coating technique at different spin speeds (1000-4000 rpm). Ceric ammonium nitrate, Ce(NO₃)₆(NH₄)₂, titanium butoxide, Ti[O(CH₂)₃CH₃]₄, and zirconium propoxide, Zr(OCH₂CH₂CH₃)₄, were used as starting materials. Differential calorimetric analysis (DSC) and thermogravimetric analysis (TGA) were carried out on the CeO₂-TiO₂-ZrO₂ gel to study the decomposition and phase transition of the gel. For molecular, structural, elemental, and morphological characterization of the films, Fourier Transform Infrared (FTIR) spectral analysis, X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDS), cross-sectional scanning electron microscopy (SEM), and atomic force microscopy (AFM) were carried out. All the ternary oxide thin films were amorphous. The optical constants (refractive index, extinction coefficient, band gap) and thickness of the films were determined in the 350-1000 nm wavelength range by using an nkd spectrophotometer. The refractive index, extinction coefficient, and thickness of the films were changed by varying the spin speed. The oscillator and dispersion energies were obtained using the Wemple-DiDomenico dispersion relationship. The optical band gap is independent of the spin speed and has a value of about E_g≈2.82±0.04 eV for indirect transition.     

多孔阳极氧化铝薄膜光学常数的确定

根据多孔阳极氧化铝(AAO)薄膜的实验透射谱(200—2500nm)，采用极值包络线算法确定其光学常数，并由此较精确地计算出AAO薄膜样品在该波段的光学常数.结果表明，多孔氧化铝薄膜表现出直接带隙(能隙约4．5eV)半导体的光学特性，且其光学常数与制样中的重要工艺参数阳极氧化电压有显著的相关性，即随阳极氧化电压的增加，AAO薄膜的厚度、折射率和光学能隙变大，消光系数减小．同时，计算得到的薄膜厚度与实测值相吻合，则说明计算结果和实验值是自洽的. 关键词： 薄膜光学 光学常数 多孔阳极氧化铝 阳极氧化电压     

Characterization of SnO2 obtained from the thermal oxidation of vacuum evaporated Sn thin films

Tin oxide has been prepared by thermal oxidation of evaporated tin thin films onto pyrex glass substrates. Films oxidation was achieved in air at a temperature of 600 °C with varied duration from 20min to 3 h. Structural, optical and electrical properties of the films were characterized by means of X-ray diffraction, UV–vis spectroscopy and electrical resistivity measurements respectively. The X-ray analysis revealed the transformation of Sn into SnO₂ with preferential orientation along (101) plans. No intermediate phases such as SnO and Sn₃O₄ were evidenced. It was also found that the SnO₂ crystallites orientation changed with the annealing time due to the strain energy effect. Both band gap energy and electrical resistivity decrease with annealing time due to the crystalline quality improvement and films densification. We have noticed that oxidation at 600 °C for 3 h leads to transparent and conductive films with suitable properties for photovoltaic applications.     

Preparation and characterization of thermally evaporated titanium phthalocyanine dichloride thin films

Titanium phthalocyanine dichloride (TiPcCl₂) thin films are prepared on glass substrates by vacuum-sublimation technique. The optical constants of thin films are obtained by means of thin film spectrophotometry. Planar structures for the study of electrical properties are fabricated with TiPcCl₂ as active layer and silver as the contact electrodes. The effects of post-deposition annealing on the optical band gap have been studied. The optical transition is found to be direct allowed in nature. The invariance in the optical band gap shows the thermal stability of the material. The activation energies are determined using the Arrhenius plots between electrical conductivity and inverse temperature. The variation in activation energy with post-deposition annealing is investigated. The unit cell dimensions of TiPcCl₂ thin films are also determined by indexing the powder diffraction data. The variations of the surface morphology and grain size with annealing have also been studied.     

Optical characterization of thin thermal oxide films on copper by ellipsometry

A complete optical characterization in the visible region of thin copper oxide films has been performed by ellipsometry. Copper oxide films of various thicknesses were grown on thick copper films by low temperature thermal oxidation at 125 °C in air for different time intervals. The thickness and optical constants of the copper oxide films were determined in the visible region by ellipsometric measurements. It was found that a linear time law is valid for the oxide growth in air at 125 °C. The spectral behaviour of the optical constants and the value of the band gap in the oxide films determined by ellipsometry in this study are in agreement with the behaviour of those of Cu₂O, which have been obtained elsewhere through reflectance and transmittance methods. The band gap of copper oxide, determined from the spectral behaviour of the absorption coefficient was about 2 eV, which is the generally accepted value for Cu₂O. It was therefore concluded that the oxide composition of the surface film grown on copper is in the form of Cu₂O (cuprous oxide). It was also shown that the reflectance spectra of the copper oxide–copper structures exhibit behaviour expected from a single layer antireflection coating of Cu₂O on Cu. Received: 19 July 2001 / Accepted: 27 July 2001 / Published online: 17 October 2001