Near-Surface Structure of Plasma Polymer Films Affects Surface Behavior in Water and its Interaction with Proteins

Using low pressure plasma polymerization, nano-scaled oxygen-rich plasma polymer films (CO) were deposited onto pristine silicon wafers as well as on nitrogen-containing plasma polymer (CN) model surfaces. We investigate the influence of the nature of the substrate as well as a potential sub-surface effect emerging from the buried CO/CN interface, just nanometers below the surface. X-ray Photoelectron Spectroscopy and Time-of-Flight Secondary Ion Mass Spectrometry revealed two important phenomena that occurred during the deposition of the terminal CO layer: (1) a strong degree of oxidation, already for 1 nm nominal thickness, and (2) a gradual transition in chemical composition between the two layers, clearly indicating that effectively a vertical chemical gradient results, even when a two-step coating process was applied. Such terminal gradient film structures were used to study film stability in aqueous environments. Molecular rearrangements were scrutinized in the top-surface in contact with water and we found that the top-surface chemistry and wetting properties of the oxygen-rich termination layer matched those of thick CO reference coatings. Nevertheless, the adsorption of green fluorescent protein (GFP) was observed to be sensitive to the CO terminal layer thickness. Namely, an enhanced protein adsorption was observed for 1–2 nm thick CO layers on CN, whereas a significantly reduced protein adsorption was seen on ≥?3 nm thick CO terminal layers. We conclude that both, surface and sub-surface conditions significantly affect protein adsorption as opposed to the traditional consideration of surface properties alone.     

Polypyrrole electrodeposition on inorganic semiconductors CuInSe2 and CuInS2 for photovoltaic applications

Thin polypyrrole (PPy) layers with an average thickness of about 0.5 μm were deposited, using potentiostatic and galvanostatic techniques, on CuInSe₂ (CISe) structures prepared electrochemically on glass/ITO substrates and on CuInS₂ (CIS) structures fabricated on Cu tape substrates. The polymer layer of p-type is considered as an alternative to the traditional buffer layer and window layer in the conventional cell structure. The deposition proceeded from an aqueous solution containing sodium naphthalene-2-sulfonate as a dopant. In order to prepare stable PPy films of high quality with a good adherence to the surface of inorganic semiconductors CIS and CISe, the optimal concentrations of reagents, current densities and electrodepositing potentials were selected experimentally. Electrochemical polymerization of pyrrole to PPy on CIS surfaces is faster under white light irradiation and the polymerisation starts at lower potential than in the dark. Significant photovoltage and photocurrent of the fabricated CISe/PPy and CIS/PPy structures have been observed under standard white light illumination.     

Photoinduced liquid crystal alignment by layer-by-layer ultrathin films with dual photoreaction moieties

A novel layer-by-layer (LBL) film containing dual photoreaction groups, cinnamoyl and azobenzene, was prepared from poly(diallyldimethylammonium chloride) (PDDA) and a photosensitive polyanion, PCAzo, in aqueous solution via electrostatic attraction. The film was able to induce uniform alignment of liquid crystals (LCs) with good stability and 2.3° pretilt angle by oblique irradiation with linearly polarised ultraviolet light (LPUVL). UV absorption and FTIR spectroscopic results indicate that the photoreactions of the two photoreactive groups jointly participate in generating the anisotropy of the film. The dichroic ratio of the film was found to depend on the number of adsorbed layers. The thicker film has the larger dichroic ratio after the LPUVL irradiation. The reorientation behaviour of the LC molecules was found to be associated with the LBL film thickness. Experiment results revealed that the photo-crosslinking of the cinnamoyl groups was responsible for the stability of the anisotropic orientation, and the isomerisation of the azobenzene chromophores led primarily to the appropriate pretilt angle.     

Atom probe tomography characterization of thin copper layers on aluminum deposited by galvanic displacement

″Ultrathin″ metallization layers on the order of nanometers in thickness are increasingly used in semiconductor interconnects and other nanostructures. Aqueous deposition methods are attractive methods to produce such layers due to their low cost, but formation of ultrathin layers has proven challenging, particularly on oxide-coated substrates. This work focused on the formation of thin copper layers on aluminum, by galvanic displacement from alkaline aqueous solutions. Analysis by atom probe tomography (APT) showed that continuous copper films of approximately 1 nm thickness were formed, apparently the first demonstration of deposition of ultrathin metal layers on oxidized substrates from aqueous solutions. The APT reconstructions indicate that deposited copper replaced a portion of the surface oxide film on aluminum. The results are consistent with mechanisms in which surface hydride species on aluminum mediate deposition, either by directly reducing cupric ions or by inducing electronic conduction in the oxide, thus enabling cupric ion reduction by Al metal.     

Photoreactive Langmuir–Blodgett–Kuhn multilayer assemblies from functionalized liquid-crystalline side chain polymers,I. Homopolymers containing azobenzene chromophores

Stable monomolecular layers of a liquid-crystalline homopolymer bearing azobenzene chromophores in the mesogenic side groups could be prepared at the water–air interface by slow compression at room temperature. From the area per monomer unit of A₀≈0.25 nm² a structural model with tightly packed azobenzene groups oriented nearly parallel to the surface normal was deduced. After transfer to a solid support in a Y-type mode the obtained Langmuir–Blodgett–Kuhn (LBK) multilayer assemblies of varying thicknesses (from a double layer to a thick film of d = 238 nm, capable of guiding optical modes) were prepared and analyzed by X-ray reflection and optical evanescent wave techniques. A monolayer thickness of d₀ = 2.52 nm, as well as the anisotropic index of refraction of these layers, could thus be evaluated. Photo-isomerization by UV-irradiation (at λ = (360±30)nm) was examined by UV-VIS absorption spectroscopy. X-ray reflectivity data of samples illuminated for 30 min showed a complete loss of the layered structure of the LBK samples. As a result strongly light-scattering films were obtained. Surface plasmon microscopy was used to demonstrate the usefulness of this photo-induced order–disorder transition for optical information storage.     

Deposition of DNA rafts on cationic SAMs on silicon [100

We demonstrate a guided self-assembly approach to the fabrication of DNA nanostructures on silicon substrates. DNA oligonucleotides self-assemble into "rafts" 8 x 37 x 2 nm in size. The rafts bind to cationic SAMs on silicon wafers. Electron-beam lithography of a thin poly(methyl methacrylate) (PMMA) resist layer was used to define trenches, and (3-aminopropyl)triethoxysilane (APTES), a cationic SAM precursor, was deposited from aqueous solution onto the exposed silicon dioxide at the trench bottoms. The remaining PMMA can be cleanly stripped off with dichloromethane, leaving APTES layers 0.7-1.2 nm in thickness and 110 nm in width. DNA rafts bind selectively to the resulting APTES stripes. The coverage of DNA rafts on adjacent areas of silicon dioxide is 20 times lower than on the APTES stripes. The topographic features of the rafts, measured by AFM, are identical to those of rafts deposited on wide-area SAMs. Binding to the APTES stripes appears to be very strong as indicated by "jamming" of the rafts at a saturation coverage of 42% and the stability to repeated AFM scanning in air.     

PET表面接枝偶氮聚合物和光致取向研究

合成了一种丙烯酸酯类含芳香族偶氮生色团的单体ANB .以二苯甲酮为引发剂 ,采用固相紫外光接枝方法将上述单体接枝到聚酯 (PET)膜的表面 ,得到了一种具有光响应性的接枝膜 .通过SEM研究了接枝膜的表面和断面的形貌 ,观察到偶氮接枝层均匀地覆盖了PET表面 ,接枝层厚度约 0 4μm .研究发现 ,当使用488nm的线偏振激光照射接枝膜时 ,偶氮生色团通过快速的顺反异构化反应在垂直于偏振光极化方向上发生取向 ,得到了具有光学各向异性表面的PET接枝膜 .接枝膜的取向是一个快速过程 ,取向有序度参数在 2min时即达到最大值 ,为 0 0 6左右     

Sol–Gel SiO2-ZrO2 Coatings for Optical Applications

SiO₂-ZrO₂ based nanostructured multilayers films have been prepared by sol–gel processing from metallorganic precursors by low temperature inorganic polymerization reactions. Simultaneous gelation of both precursors was realized. Homogeneous and transparent films were obtained at room temperature by dip- and spin-coating on glass and silicon wafer substrates. Samples with successively deposited layers (1–3 layers) and successive thermal treatments have been also studied. Each deposited layer was thermally treated for 1 h at 300°C. The coatings were characterized by XRD, spectroellipsometry (SE), UV-VIS spectroscopy and AFM methods. The influence of substrates, number of coatings and number of thermal treatments on the optical and structural properties of the films was established. The thickness of three deposited SiO₂-ZrO₂ layers is about 496 nm on glass substrates and 413 nm on the silicon wafer substrate. The films deposited on glass are more porous than those deposited on silicon. The properties of optical waveguide prepared from SiO₂-ZrO₂ layers on silicon substrates will be discussed.     

Photoswitched Cell Adhesion on Azobenzene‐Containing Self‐Assembled Films

Stimuli‐responsive surfaces that can regulate and control cell adhesion have attracted much attention for their great potential in diverse biomedical applications. Unlike for pH‐ and temperature‐responsive surfaces, the process of photoswitching requires no additional input of chemicals or thermal energy. In this work, two different photoresponsive azobenzene films are synthesized by chemisorption and electrostatic layer‐by‐layer (LbL) assembly techniques. The LbL film exhibits a relatively loose packing of azobenzene chromophores compared with the chemisorbed film. The changes in trans/cis isomer ratio of the azobenzene moiety and the corresponding wettability of the LbL films are larger than those of the chemisorbed films under UV light irradiation. The tendency for cell adhesion on the LbL films decreases markedly after UV light irradiation, whereas adhesion on the chemisorbed films decreases only slightly, because the azobenzene chromophores stay densely packed. Interestingly, the tendency for cell adhesion can be considerably increased on rough substrates, the roughness being introduced by use of photolithography and inductively coupled plasma deep etching techniques. For the chemisorbed films on rough substrates, the amount of cells that adhere also changes slightly after UV light irradiation, whereas, the amount of cells that adhere to LbL films on rough substrates decreases significantly.     

Layer-by-layer deposited organic/inorganic hybrid multilayer films containing noncentrosymmetrically orientated azobenzene chromophores

Organic/inorganic hybrid multilayer films with noncentrosymmetrically orientated azobenzene chromophores were fabricated by the sequential deposition of ZrO2 layers by a surface sol-gel process and subsequent layer-by-layer (LbL) adsorption of the nonlinear optical (NLO)-active azobenzene-containing polyanion PAC-azoBNS and poly(diallyldimethylammonium chloride) (PDDA). Noncentrosymmetric orientation of the NLO-active azobenzene chromophores was achieved because of the strong repulsion between the negatively charged ZrO(2) and the sulfonate groups of the azobenzene chromophore in PAC-azoBNS. Regular deposition of ZrO(2)/PAC-azoBNS/PDDA multilayer films was verified by UV-vis absorption spectroscopy and quartz crystal microbalance measurements. Both UV-vis absorption spectroscopy and transmission second harmonic generation (SHG) measurements confirmed the noncentrosymmetric orientation of the azobenzene chromophores in the as-prepared ZrO2/PAC-azoBNS/PDDA multilayer films. The square root of the SHG signal (I(2omega)(1/2)) increases with the increase of the azobenzene graft ratio in PAC-azoBNS as the number of deposition cycles of the ZrO(2)/PAC-azoBNS/PDDA films remains the same, while the second-order susceptibility chi(zzz)(2) of the film decreases with the increase of the azobenzene graft ratio. Furthermore, the present method was successfully extended to realize the noncentrosymmetric orientation of azobenzene chromophores in multilayer films when small organic azobenzene compounds with carboxylic acid and/or hydroxyl groups at one end and sulfonate groups at the other end were used. The present method was characterized by its simplicity and flexibility in film preparation, and it is anticipated to be a facile way to fabricate second-order nonlinear optical film materials.     

Sulforhodamine Adsorbed Langmuir-Blodgett Layers on Silver Island Films: Effect of Probe Distance on the Metal-Enhanced Fluorescence

Metal-Enhanced Fluorescence (MEF) has become an important method in biomedical sensing. In this paper, we present the distance-dependent MEF of sulforhodamine B (SRB) monolayer on silver island films (SIFs). SRB is electrostatically incorporated into the Langmuir-Blodgett (LB) layers of octadecylamine (ODA) deposited on glass and SIFs substrates. The distances between SRB and SIFs or glass surfaces are controlled by depositing a varied number of inert stearic acid (SA) spacer layers. SRB is incorporated into positively charged LB layers of ODA by immersing the ODA deposited substrates into aqueous solution of SRB. Dye incorporated ODA layers with 10 nm separation distance from the SIFs surface show maximum metal-enhanced fluorescence intensity; ~7-fold increase in intensity as compared to that from the glass surface. The corresponding enhancement factor is reduced with increasing or decreasing the probe distance from the SIFs surface. Additionally, SRB on SIF surfaces show reduced lifetimes. We observed the shortest lifetime from the SRB with 5 nm distance from the SIF surfaces and the lifetime increased consistently with increasing the distances between the fluorophore and the SIFs surface. These observed spectral changes, increase in fluorescence intensity and decreased fluorescence lifetimes, are in accordance with the expected effects due to near-field interactions between the silver nanoparticles and fluorophores. We have also analyzed the complex fluorescence heterogeneous decays on metallic nanostructured surfaces using continuous distributions of decay times. The decay-time distributions appear to be sensitive to the distance between the metal and fluorophore and represent the underlying heterogeneity of the samples. The present systematic study provides significant information on the effect of fluorophore distance on the metal-enhanced fluorescence phenomenon.     

双偶极半菁衍生物／H4SiW12O40自组装多层膜的研究

通过交替吸附H_4SiW_(12)O_(40)和双偶极半菁衍生物制备了一个新颖的无机- 有机杂化自组装多层膜。紫外可见光谱和X射线衍射研究证实了半菁衍生物 /H_4SiW_(12)O_(40)多层膜可被均匀沉积厚达至少12层，具有平均膜厚5.3nm(半菁 阳离子层加SiW_(12)O_(40)~(4-)层)的二维有序结构，膜中半菁衍生物与H_4SiW_ (12)O_(40)间发生了较强的电荷转移作用。循环伏安研究表明，薄膜具有较好的电 化学活性。     

Film growth and interface reaction of ultra thin 3d-transition metal oxide/metal layer structures

The interface reactions between transition metal oxide substrates and ultra thin metal layers of different thickness (<15 nm) have been investigated by using x-ray photoelectron spectroscopy (XPS). To a different extent oxidation of deposited metal and reduction of the oxidic substrate is visible for complementary layer systems. For the interface nickel oxide/manganese an enhanced reaction is found compared to the system manganeseoxide/nickel. Based on the experimental data a model of the evolving interface is proposed.     

Tailor-made surface properties of particles with a hydrophilic or hydrophobic polymer shell mediated by supercritical CO2

Controlling the surface characteristics of inorganic materials with an organic shell is of great interest for control of the properties of the final material. A challenge is thus to be able to deposit a polymer shell with different solvation properties onto the surface of inorganic particles and to have a good control of the thickness of the organic layer without a prefunctionalization of surfaces. We demonstrate, in this paper, a method for coating silica particles (170-550 nm), used as model substrates, with either a hydrophilic (polyethylene glycol) or a hydrophobic polymer (polybutadiene hydroxy terminated) using a supercritical antisolvent process (precipitation from a compressed antisolvent). Several operating parameters were studied to control precisely the thickness of the deposited layer (from 2 to 30 nm), which was characterized using TEM, FESEM, XPS, and UV-visible techniques. This work demonstrates that supercritical antisolvent processes are powerful methods and good alternatives to conventional coating techniques toward the development of hybrid and/or core-shell nanomaterials.     

Sol–gel titania coating on unmodified and surface-modified polyimide films

Sol–gel coating of metal oxides on polymer substrates is a useful process to fabricate various organic–inorganic hybrid materials under mild conditions. However, this process is hardly applicable to pristine polyimide (PI) films because their surfaces do not display effective functional groups for metal oxide coatings. In this study, we firstly examined direct sol–gel coating of titania thin layers on unmodified PI film surfaces. The results confirmed homogeneous, ultrathin titania layer coating and showed that the thickness and microscopic morphology of the titania layers were affected by titanium alkoxide concentrations in the spin coating solutions. We next investigated titania layer coating on surface-modified PI films that prepared using alkaline hydrolysis, which generated carboxylic acid groups on the film surfaces. Optimal hydrolysis time was determined using FT-IR spectroscopy and contact angle measurements. After sol–gel titania coating on the hydrolyzed PI film surfaces, the Scotch tape test was conducted to evaluate adhesion strength between the titania layers and PI film surfaces. Morphological observations of the sample surfaces after the tests clearly showed that surface modification of PI films increased titania layer adhesions. Effect of hydrothermal treatments on film formability and adhesion strength between titania-PI film interfaces was also evaluated.     

不含亲水基团的偶氮苯衍生物L-B膜的制备和性质研究

本文合成了具有一定结构特点的偶氮苯的衍生物, 以元素分析和^1HNMR鉴定了B产物的组成和结构。采用L-B技术制备了其多层L-B膜, 以紫外可见光谱研究了膜中分子的聚集状态和膜的纵向均匀性; 以偏振紫外确定了膜中分子偶氮基的取向; L-B膜的小角度X射线衍射结果表明膜具有层状有序的周期性结构。     

Adsorption of gelatin to a polystyrene/water interface as a function of concentration, pH, and ionic strength

The technique of neutron reflection has been used to investigate the adsorption of alpha-enriched gelatin from aqueous solution onto spun polystyrene substrates. Neutron reflection can provide information about the distribution of material perpendicular to an interface as well as total adsorbed amounts. The adsorbed layers were found to have maximum density at the surface, decaying with distance into solution. The adsorbed amount, layer thickness, and density were all seen to increase with solution concentration. Temperature was found to have little effect on adsorption. Thicker, less dense layers were observed at high pH and thinner, denser layers were observed at low pH, but the total adsorbed amount did not change significantly. The presence of sodium chloride had little effect on the adsorbed layers. The results are discussed in the context of other studies and the known amino acid sequence of alpha-gelatin.     

Development of electrospun metallic hybrid nanofibers via metallization

The metallized hybrid nanofiber webs were prepared by using a combined technology of electrostatic spinning and metallization. The electrospun polyurethane (PU) nanofibers were metallized with different thicknesses of copper layer via metal vapor deposition technique. The thickness of the copper layer, which ranges from 10 to 100 nm, was monitored and controlled. The resultant metallized hybrid nanofiber webs were characterized using field emission scanning electron microscopy (FE‐SEM), wide angle X‐ray diffraction (WAXD), and thermogravimetric analysis (TGA). FE‐SEM images demonstrated that the nanoscaled copper layers are well deposited on the surface of the PU nanofibers. TGA result indicated that the thermal stability of the metallized hybrid PU nanofibers was dramatically enhanced due to the barrier effects of thin metallic copper layer. WAXD data confirmed that the crystalline copper layers were well deposited onto the PU nanofibers. Moreover, the mechanical properties of the metallized hybrid PU nanofiber webs were increased with increase in the thickness of deposited copper layer. Unlike the organic PU nanofiber webs, it was observed that the metallized hybrid PU nanofiber webs showed higher conductive properties depending on the thickness of the deposited copper layer. Copyright © 2009 John Wiley & Sons, Ltd.     

Preparation and characterization of thin films of SiO(x) on gold substrates for surface plasmon resonance studies

We report here on the fabrication and characterization of stable thin films of amorphous silica (SiO(x)) deposited on glass slides coated with a 5 nm adhesion layer of titanium and 50 nm of gold, using the plasma-enhanced chemical vapor deposition (PECVD) technique. The resulting surfaces were characterized using atomic force microscopy (AFM), ellipsometry, contact angle measurements, and surface plasmon resonance (SPR). AFM analysis indicates that homogeneous films of silica with low roughness were formed on the gold surface. The deposited silica films showed excellent stability in different solvents and in piranha solution. There was no significant variation in the thickness or in the SPR signal after these harsh treatments. The Au/SiO(x) interfaces were investigated for their potential applications as new surface plasmon resonance sensor chips. Silica films with thicknesses up to 40 nm allowed visualization of the surface plasmon effect, while thicker films resulted in the loss of the SPR characteristics. SPR allowed further the determination of the silica thickness and was compared to ellipsometric results. Chemical treatment of the SiO(x) film with piranha solution led to the generation of silanol surface groups that have been coupled with a trichlorosilane.     

Synthesis of porphyrinoids with silane anchors and their covalent self-assembling and metallation on solid surface

We have synthesized a set of porphyrin and phthalocyanine compounds with two different silane anchors. Syntheses of the anchor-substituted chromophores have been carried out via hydrosilylation of alkene derivatives, catalyzed by platinum complexes. The reduction side-process was suppressed using specific anchor/catalyst pairs, and the silane-containing compounds were successfully isolated from hydrogenated by-products in pure form with good yields. The target porphyrinoids having stable reactive silane anchors possess the ability to self-assemble on metal oxides and quartz surfaces and optical fibers. Covalent attachment is done in one-step, which makes the bonding process fast and easy. Immobilized chromophores were further converted by on-surface reactions into Zn(II) and Mg(II) metal complexes. The metallation time was found to be as fast as 1 min for Zn ion. Bonding densities calculated from the absorbances of the deposited layers give rough estimations for packing of the molecules on various substrates and evidence for monomolecular layers formation.