Dialkylaluminum derivatives of saturated and unsaturated acids

Summary Some salts of dialkylaluminum with both saturated and unsaturated acids were obtained. The salts of dialkylaluminum with unsaturated acids are capable of being polymerized and copolymerized in the presence of azobisisobutyronitrile as initiator.     

Investigation and radiometric determination of saturated and unsaturated aliphatic dicarboxylic acids

Radiometric determination of saturated and unsaturated aliphatic dicarboxylic acids has been developed using a precipitation reaction. The influence of the conditions of precipitation, the composition of the calcium salts of the acids, thepH, and the composition of solvent mixtures were investigated. The solubility of the calcium salts diminished with an increase of the ethanol content in weakly alkaline medium. Linear relations were found between the solubilities of the calcium salts and the dielectric constants of the solvent mixtures. The calcium salts have poor solubilities atpH 9 in 20% aqueous ethanol containing ammonia. The radiometric titrations were carried out in 0.05M solutions, using 0.05M ⁴⁵Ca-labelled CaCl₂ solution in 20% aqueous ethanol. The titrations were done in an apparatus suitable for the detection of soft β-emitting isotopes.     

Investigation and radiometric determination of saturated and unsaturated aliphatic monocarboxylic acids and aromatic dicarboxylic acids

Investigations have been carried out on the precipitation of calcium salts of saturated and unsaturated aliphatic monocarboxylic acids and of aromatic dicarboxylic acids. The optimum ethanol/water solvent ratio has been studied at which the sodium, ammonium or triethylammonium salts of the acids have a good solubility, whereas the calcium salts are poorly soluble and can be precipitated. Based on these investigations the radiometric determination of formic acid, palmitic acid, stearic acid, methacrylic acid, oleic acid, and o-, m- and p-phthalic acids has become possible. A linear correlation has been found between the solubilities of the calcium salts of o-, m- and p-phthalic acids and the dielectric constant of the solvent mixture. CaCl₂ solution labelled with⁴⁵CaCl₂ was used for the titrations, with a solvent composition identical to that of the solution to be titrated. Radiometric titrations were carried out in 0.05M solutions for dicarboxylic acids, and in 0.1M solutions for monocarboxylic acids. For palmitic and stearic acids titrations were also carried out in the 0.01M concentration range. The equipment used for titrations was capable of detecting isotopes of soft β-radiation.     

Thermodynamic model of gas permeability in polymer membranes

A new molecular thermodynamic model is developed of the gas permeability in polymer membranes on the basis of configurational entropy and Flory‐Huggins theory to predict permeability dependence on the concentration of penetrant. Three kinds of configurational entropy are taken into account by this model; that is, the disorientation entropy of polymer, the mixing entropy, and specific interaction entropy of polymer/gas. The validity of the mathematical model is examined against experimental gas permeability for polymer membranes. Agreement between experimental and predicted permeability is satisfactory. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 661–665, 2007     

Direct conversion of saturated and unsaturated carboxylic acids into aldehydes by thexylbromoborane-dimethyl sulfide

Thexylbromoborane-dimethyl sulfide readily reduces aliphatic carboxylic acids, including α,β-unsaturated ones, to aldehydes in excellent yields. However, the yields of aromatic aldehydes vary with the substituents.     

Gas permeability of cupric ion containing HTPB based polyurethane membranes

For the purpose of oxygen enrichment from air, the gas permeability and selectivity of an ionic polyurethane membrane was under investigation. Membranes of ionic polyurethane were prepared by step-growth polymerization of hydroxyl terminated polybutadiene (HTPB) and 4,4′-dicyclohexylmethane diisocyanate (H₁₂MDI). The ionic group was introduced by adding N-methyldiethanolamine (MDEA) as the chain extender of which the tertiary amines were complexed with cupric ions. The effect of hard segment content, polymerization method, peroxide introduction, and the amount of cupric ion on gas permeability were investigated. It was found that the binding of hard segment and the flexibility of soft segments had subtle effects on gas permeability. Membranes of the same composition were synthesized through two different procedures, one- and two-stage polymerization. The former contains large hard segment of cluster aggregation and flexible soft segments had a higher gas permeation rate. When a crosslinker, benzoyl peroxide, was added, the crosslinkage within soft segments hindered cluster formation by hard segment aggregation, the permeability increased. Furthermore, CuCl₂ addition enhanced hard segment aggregation, more hard segments formed cluster aggregates and less dispersed in soft segment region, which also increased permeability. However, excess CuCl₂ addition resulted in CuCl₂ piling up in the soft segment region, which restricted the movement of soft segments and therefore reduced the gas permeability.     

Synthesis of phosphorus-substituted amides of unsaturated carboxylic acids containing PCHN fragment

Russian Journal of General Chemistry -     

Synthesis of substituted hydroxymethylene diphosphonic acids and their derivatives containing unsaturated fragments

Russian Journal of General Chemistry -     

Synthesis and characterisation of saturated and unsaturated triruthenium clusters containing electronically symmetrical and asymmetrical alkynes

The synthesis and characterisation of μ₃-η²-alkynyl triruthenium clusters, [Ru₃(μ₃-η²-R¹-4-C₆H₄CCR²)(μ-dppm)(μ-CO)(CO)₇] (1, saturated), [Ru₃(μ₃-η²-R¹-4-C₆H₄CCR²)(μ-dppm)(CO)₇] (2, unsaturated) and [Ru₃(μ₃-η²-R¹-4-C₆H₄CCR²)(μ-dppm)(PPh₃)(CO)₇] (3, saturated) containing symmetrical and asymmetrical alkynes in which R¹ and R² are electron donor or electron withdrawing groups in the para position of the aromatic ring(s) or R² is ferrocenyl, are reported. Clusters 1 were obtained from the reactions of [PPN][Ru₃(μ-Cl)(CO)₁₀] with R¹-4-C₆H₄CCR² and dppm. Clusters 1 were successfully decarbonylated to give unsturated clusters 2, with the exception of the FcCCC₆H₄-4-NO₂ containing cluster, which is stable. Novel adducts 3 were obtained in high yields by addition of PPh₃ to unsaturated clusters 2. Clusters 1-3 were characterised by analytical and spectroscopic data, and structures were proposed on the basis of systematic ³¹P NMR studies and correlations with X-ray structural data of related compounds available in the literature. Saturated compounds 1 contain a CO and a dppm ligands bridging the same edge, which is also parallel to the μ₃-η²-alkyne, as opposed to the structure previously proposed for the PhCCPh and other derivatives, and established by X-ray crystallography for the PhCCCCPh cluster derivative, in which the dppm ligand bridges a different edge. Unsaturated compounds 2 exhibit the same structure established for the PhCCPh derivative in the solid state, with the alkyne bonded in the μ₃-η²-mode perpendicular to the Ru₂ edge supported by the dppm ligand. Because the dppm phosphorus chemical shifts were sensitive to the alkyne electronic asymmetry, it was possible to show that clusters containing electronically asymmetrical alkynes exist in two inseparable isomeric forms, which differ with respect to the alkyne orientation. Similarly to their osmium analogues, saturated compounds 3 exist as inseparable mixtures of isomers that differ with respect to the position of the bridging CO and dppm ligands, and in the cases of asymmetrical alkyne derivatives, also with respect to the orientation of the alkyne. This work has established, therefore, that μ-CO and dppm ligand positions respective to the μ₃-η²-alkyne in saturated clusters 1 and 3 are sensitive both to the nature of the coordinated alkyne and to the presence of a PPh₃ in place of a CO ligand on the metal frame.     

Stereoselective bromination-suzuki cross-coupling of dehydroamino acids to form novel reverse-turn peptidomimetics: substituted unsaturated and saturated indolizidinone amino acids

A general and efficient methodology has been developed to prepare the C4-substituted dipeptide reverse-turn mimetics unsaturated (9a, 10a) and saturated (11a) azabicyclo[4.3.0] alkane amino acid derivatives. The side chain was introduced by bromination of dehydroamino acid intermediates followed by Suzuki coupling. Hydrogenation of the bicyclic dehydroamino acid 9a afforded saturated bicyclic lactam 11a. This approach can be further explored for the synthesis of a variety of such beta-turn mimetics with aryl and alkyl side chain functionalities. [reaction: see text]     

New unsaturated amino acids containing an allylsilane moiety on the lateral chain

New enantiomerically enriched polyfunctionalized allylsilanes have been obtained from the synthetic elaboration of naturally occurring serine. In particular, an oxazolidine bearing an allylsilane framework on the lateral chain proved to be a suitable precursor for the corresponding silylated vinyl glycine derivatives.     

Solvent-dependent permeability in asymmetric ceramic membranes with tortuous or non-tortuous mesopores

Solvent-dependent transport and the role of surface interactions were examined in commercial mesoporous ceramic membranes using permeability and thermoporometry measurements. The membranes chosen were titania (TiO₂) with tortuous interconnected pores (1, 5, and 50 kDa, corresponding to pore diameters of ca. 8.2, 18.3, and 33.2 nm, respectively) and alumina (Al₂O₃) with non-tortuous 20 nm cylindrical pores. A pre-water/solvent/post-water permeability cycle was employed to account for structural differences between membranes and to gauge the effect of residual solvent on water permeability at different temperatures. Our results suggest that in both types of membranes, restricted permeability of 1-butanol and cyclohexane was due to a combination of surface sorption and an increase in disjoining pressure due to solvation forces. Sorption and solvation forces were prevalent as their length scales were on the same order of magnitude as the pore radii. For 1-butanol, chemisorption changed the surfaces from hydrophilic to hydrophobic, and led to a significant decrease in post-water permeability. While Darcy's law could not describe 1-butanol and cyclohexane permeability, it did apply to water and 1,4-dioxane in the 20 nm alumina membranes. Thermoporometry, coupled with permeability, was further used to evaluate surface wetting within the mesopores.     

Mass spectral studies of unsaturated carboxylic acids. II—Some acids containing two double bonds

The mass spectra of some doubly unsaturated carboxylic acids are reported. Where C-2 is quaternary, the fragmentation pathway is similar to that previously demonstrated for βγ-unsaturated acids. The unbranched acids show different behaviour, similar to their thermal pyrolysis.     

Study of copper complexes in saturated and unsaturated aqueous ammonium oxalate solutions containing Cu(II) impurity

The influence of Cu(II) impurity on chemical equilibria in unsaturated and saturated ammonium oxalate (AO) aqueous solutions was investigated as a function of concentration _ci$c_{\text{i}}$ of impurity. Using the computer programme “Hyss” the species present in the solutions were analysed. It was found that in the aqueous solutions of ammonium oxalate containing Cu(II) ions the following species are formed: Cu²⁺, Cu(OH)⁺, Cu(OH)₂, CuC₂O₄⁰ and Cu(C₂O₄)₂²⁻ in addition to C₂O₄²⁻, HC₂O₄⁻, H₂C₂O₄ and (NH₄)₂C₂O₄⁰ species, and their concentration depends on concentrations _ci$c_{\text{i}}$ of Cu(II) impurity and c of ammonium oxalate. The dependences of solution pH and of absorbance A   and the corresponding wavelength λ$\lambda$ for unsaturated aqueous solutions on ammonium oxalate concentration c   containing different concentrations _ci$c_{\text{i}}$ of Cu(II) ions showed three well-defined regions characterised by transition values of solution pH or solute concentration c. Speciation analysis revealed that Cu²⁺ and CuC₂O₄⁰, CuC₂O₄⁰ and Cu(C₂O₄₎₂²⁻, and Cu(C₂O₄)₂²⁻ complexes are predominantly present in the solute concentration intervals c≤0.01$c\le 0.01$ mol/dm³, 0.01 mol/dm³ <c<0.03$<c<0.03$ mol/dm³ and c≥0.03$c\ge 0.03$ mol/dm³, respectively. The concentration interval range 0.01 mol/dm³ <c<0.03$<c<0.03$ mol/dm³ corresponds to the pH interval where Cu(OH)₂ is precipitated. It was found that the solubility of ammonium oxalate at 30 °$°$C increases practically linearly with an increase in the concentration of Cu(II) impurity. Speciation analysis of saturated aqueous solutions of ammonium oxalate revealed that Cu(II) ions contained in AO saturated solutions exist mainly as Cu(C₂O₄)₂²⁻-type complexes, and the increase in the solubility of AO in the presence of Cu(II) impurity is essentially due to an increase in the ratio of the concentrations of CuC₂O₄⁰ and Cu(C₂O₄)₂²⁻ species.     

Radiation effect of a high energy electron beam on thin films of saturated and unsaturated fatty acids

Studies have been carried out on electron beam induced polymerization of LB films of saturated and unsaturated long chain aliphatic acids, in an attempt to obtain information about the dose dependence of conversion in relation to molecular arrangement. The results indicate that polymerization of unsaturated aliphatic acid LB films occurred when irradiation was carried out in a nitrogen atmosphere and that the LB films of a disordered state are more sensitive to radiation than tightly packed LB films.     

Reactive uptake kinetics of NO3 on multicomponent and multiphase organic mixtures containing unsaturated and saturated organics

We investigated the reactive uptake of NO(3) (an important night-time oxidant in the atmosphere) on binary mixtures containing an unsaturated organic (methyl oleate) and saturated molecules (diethyl sebacate, dioctyl sebacate, and squalane) which we call matrix molecules. These studies were carried out to better understand the reactivity of unsaturated organics in multicomponent and multiphase atmospheric particles. For liquid binary mixtures the reactivity of methyl oleate depended on the matrix molecule. Assuming a bulk reaction, H(matrix)√(D(matrix)k(oleate)) varied by a factor of 2.7, and assuming a surface reaction H(matrix)(S)K(matrix)(S)k(oleate)(S) varied by a factor of 3.6, where H(matrix)√(D(matrix)k(oleate) and H(matrix)(S)K(matrix)(S)k(oleate)(S) are constants extracted from the data using the resistor model. For solid-liquid mixtures, the reactive uptake coefficient depended on exposure time: the uptake decreased by a factor of 10 after exposure to NO(3) for approximately 90 min. By assuming either a bulk or surface reaction, the atmospheric lifetime of methyl oleate in different matrices was estimated for moderately polluted atmospheric conditions. For all liquid mixtures, the lifetime was in the order of a few minutes (with an upper limit of 35 min). These lifetimes can be used as lower limits to the lifetimes in semi-solid mixtures. Our studies emphasize that the lifetime of unsaturated organics (similar to methyl oleate) is likely short if the particle matrix is in a liquid state.