Orientational isomers of alpha-cyclodextrin [2]semi-rotaxanes with asymmetric dicationic threads

Two series of novel dicationic threading molecules [Quin(CH2)10R]2+ and [3,5-Lut(CH2)10R]2+, where Quin+ = quinuclidinium, 3,5-Lut+ = 3,5-lutidinium, and R+ = N(CH3)3+ and N(CH3)2CH2CH3+, form [2]semi-rotaxanes with [small alpha]-cyclodextrin (alpha-CD) in aqueous solution. The quinuclidinium and 3,5-lutidinium are sufficiently bulky to prevent threading while the R+ groups allow for slow threading by alpha-CD at 25 degrees C. The resulting [2]semi-rotaxanes exist in two orientational isomers owing to the asymmetry of both the alpha-CD cavity and the threading molecules. Two-dimensional 1H NMR spectroscopy and kinetics experiments reveal that the isomer in which the narrower rim (primary OHs) is positioned near the R+ group is the kinetically preferred isomer, while the other isomer is the thermodynamically preferred product. The kinetics and mechanism of the formation, dissociation, and interconversion of the two isomers have been determined at 25 degrees C.     

Isomeric [2]rotaxanes and unidirectional [2]pseudorotaxane composed of alpha-cyclodextrin and aliphatic chain-linked carbazole-viologen compounds

[structure: see text] Capping the alpha-cyclodextrin (alpha-CD) complex of 1-(N-carbazole)-10-[4-(4-pyridinio)-1-pyridinio]decane with 3,5-dimethoxybenzyl bromide in DMF gives two isomeric [2]rotaxanes, 2a and 2b, while alpha-CD and 1-(N-carbazole)-10-[4-(1-methyl-4-pyridnino)-1-pyridinio]decane 3 in water form mostly a unidirectional [2]pseudorotaxane having the same alpha-CD orientation as 2b. Structures were elucidated from 1H NMR and circular dichroism spectra. The orientational specificity of alpha-CD in the 3/alpha-CD [2]pseudorotaxane is due to the slow dethreading rate of the 2b-type isomer.     

Development of chlorotriazine polymer dehydrocondensing reagents (Poly-Trzs)

Polymer-type dehydrocondensing reagents comprising of a triazine dehydrocondensing reagent, itself in a polymerized form (Poly-Trz—MMs'), have been developed by exploiting the chemical properties of cyanuric chloride that readily binds to alcohol or amines. A chlorotriazine polymer bearing two alkoxy substituents at the 4- and 6- positions (Poly-O-Trz-Cl) was prepared by alternating copolymerization between cyanuric chloride and tetra(ethylene glycol). Similarly, polymers bearing both alkoxy and amino substituents (Poly-N-Trz-Cl) were synthesized from tetra(ethylene glycol) bis(4,6-dichlorotriazin-2-yl) ether 6 and tris(2-aminoethyl)amine 7 and/or ethylenediamine 8. All the polymers were shown to be good reagents for dehydrocondensation of carboxylic acids and amines in the presence of NMM, compared to the corresponding monomeric dehydrocondensing reagent (DMT-MM). The advantages of the polymeric reagents are as follows: (1) both the reaction and isolation procedure of dehydrocondensation can be greatly simplified, (2) the dehydrocondensation can be conducted in protic solvents as well as in common organic solvents, (3) the reagents can be efficiently prepared at a low cost, and (4) these reagents are considered eco-friendly, generating a lower amount of waste compared to conventionally related reagents because of high loading of the dehydrocondensing activity (ca. 3 mequiv/g).     

Long-range electron transfer in porphyrin-containing [2]-rotaxanes: tuning the rate by metal cation coordination

A series of [2]-rotaxanes has been synthesized in which two Zn(II)-porphyrins (ZnP) electron donors were attached as stoppers on the rod. A macrocycle attached to a Au(III)-porphyrin (AuP+) acceptor was threaded on the rod. By selective excitation of either porphyrin, we could induce an electron transfer from the ZnP to the AuP+ unit that generated the same ZnP*+-AuP* charge-transfer state irrespective of which porphyrin was excited. Although the reactants were linked only by mechanical or coordination bonds, electron-transfer rate constants up to 1.2x10(10) x s(-1) were obtained over a 15-17 A edge-to-edge distance between the porphyrins. The resulting charge-transfer state had a relatively long lifetime of 10-40 ns and was formed in high yield (>80%) in most cases. By a simple variation of the link between the reactants, viz. a coordination of the phenanthroline units on the rotaxane rod and ring by either Ag+ or Cu+, we could enhance the electron-transfer rate from the ZnP to the excited 3AuP+. We interpret our data in terms of an enhanced superexchange mechanism with Ag+ and a change to a stepwise hopping mechanism with Cu+, involving the oxidized Cu(phen)22+ unit as a real intermediate. When the ZnP unit was excited instead, electron transfer from the excited 1ZnP to AuP+ was not affected, or even slowed, by Ag+ or Cu+. We discuss this asymmetry in terms of the different orbitals involved in mediating the reaction in an electron- and a hole-transfer mechanism. Our results show the possibility to tune the rates of electron transfer between noncovalently linked reactants by a convenient modification of the link. The different effect of Ag+ and Cu+ on the rate with ZnP and AuP+ excitation shows an additional possibility to control the electron-transfer reactions by selective excitation. We also found that coordination of the Cu+ introduced an energy-transfer reaction from 1ZnP to Cu(phen)2+ (k = 5.1x10(9) x s(-1)) that proceeded in competition with electron transfer to AuP+ and was followed by a quantitative energy transfer to give the 3ZnP state (k = 1.5x10(9) x s(-1)).     

Synthesis of halohydrines of 5-alkylbicyclo[2.2.1]heptene series using the systems inducing electrophilic reagents

The reactions of induced hydroxyhalogenation of alkylnorbornenes with the use of a mixture of aqueous solutions of hydrochloric or hydrobromic acids (or sodium, potassium and cobalt bromides) and hydrogen peroxide or sodium hypochloriteare are studied. The reaction are established to proceed through the addition at the double bond of the ring of the electrophilic reagent HOBr or HOCl formed in situ yielding of cis-vicinal halohydrines. By dehydrohalogenation of the latter in the presence of alkali are obtained endo-6-alkyl-endo-3-oxatricyclo[3.2.1^1.5.0^2.4]octanes and by their oxidation are synthesized respective haloketones in a high yield.     

Synthesis of [60]fullerene-containing [2]rotaxanes using axle molecules bearing donor moiety

[2]Rotaxanes, consisting of a fullerene derivative bearing an electron-donating 1,5-dialkoxynaphthalene moiety and a macrocycle containing electron-deficient naphthalenetetracarboxylic diimide moieties, were first successfully synthesized and characterized.     

[3+2] Cyclopentane annulation reactions using organoiron reagents. Hydroazulene synthesis.

A one step synthesis of 4-ketohydroazuleneiron complexes 6,7 and 8 from troponeiron tricarbonyl is described.     

Highly efficient synthesis of [3]- and [5]-rotaxanes consisting of crown ether and a sec-ammonium salt

[3]- and [5]-rotaxanes consisting of crown ether and ammonium salts were synthesized in high yields by a tributylphosphine-catalyzed end-capping method which provides a simple and practical means of obtaining higher-order rotaxanes.     

A new approach to A,B-difunctionalisation of cyclodextrins using bulky 1,3-bis[bis(aryl)chloromethyl]benzenes as capping reagents

1,3-Bis[bis(4-tert-butylphenyl)chloromethyl]benzene and 1,3-bis[bis(4-anisyl)chloromethyl]benzene were employed as regioselective capping reagents for the preparation of C-6A,C-6B-bridged, permethylated alpha- and beta-CD derivatives; isolated yields up to 55% of proximally capped, methylated CDs were obtained, thus opening the way to the straightforward preparation of a wide range of A,B-functionalised CDs. As revealed by a single crystal X-ray diffraction study, the benzene-1,3-bis[bis(4-tert-butylphenyl)methyl] spacer is perfectly suited for A,B-capping of beta-cyclodextrin.     

Synthesis of Cucurbit[5]uril-Spermine-[2]Rotaxanes

Cucurbit[5]uril and decamethylcucurbit[5]uril are cyclic pentamers built from glycoluril or dimethylglycoluril respectively. Two different experimental methods have been used for the synthesis of the different [2]rotaxanes. The formed rotaxanes are characterized using ¹H-NMR spectroscopy, mass spectrometry and elemental analysis. In contrast to cucurbit[5]uril no [2]rotaxane could be obtained with decamethylcucurbit[5]uril.     

Propene polymerization with rac-Me2Si(2-Me-Benz[e]Ind)2ZrX2 [X = Cl,Me] using different cation-generating reagents

Propene was polymerized with methylaluminoxane (MAO) and cationic activated rac-dimethylsilylene-2-methylbenz[e]indenylzirconocene [ MBI-Cl ₂] and [ MBI-Me ₂]. For cationic activation of the MBI-Me ₂ system tris(pentafluorophenyl)borane [I], N,N-dimethylanilinium tetra(pentafluorophenyl)borate [III] were used. The MAO-activated dimethyl complex showed higher activity with respect to the dichloride system using high catalyst concentrations and [Al]/[Zr] ratios. Most effective cationic activator for MBI-Me ₂ was N,N-dimethylanilinium tetra(pentafluorophenyl)borate [II] in combination with Al(i-Bu₃). Using tris(pentafluorophenyl)borane [I] at different polymerization conditions or N,N-dimethylanilinium tetra(pentafluorophenyl)borate [II] in combination with Al(Et)₃ no propene polymerization was observed due to the occurrence of reduction of the catalytically active site.     

Synthesis of densely functionalised arenes using [2 + 2 + 2] cycloaddition reactions

Rh(I)-catalysed [2 + 2 + 2] cycloaddition allows the synthesis of aryl ethers and diaryl methanes containing a high degree of steric hindrance from relatively simple diyne and alkyne precursors. The diarylmethanes made in this way show no evidence in their NMR spectra, however, of rotational restriction.     

Synthesis of [2-C]-oleanolic acid and [2-C]-myricerone

Synthetic way for ¹³C-labeled oleanolic acid 1 and myricerone 2 has been developed, starting from the parent 1 and 2. The procedure involves ring opening and closure of the A rings of these oleanane triterpenes. ¹³C was introduced into the 2-position by ¹³C-MeLi as an isotope source. Chelation controlled addition of methyllithium to -hydoxypentanone 11 is a common crucial step for labeling of 1 and 2, and judicious choice of protecting groups is essential for 2.     

四氮杂杯[2]芳烃[2]三嗪的合成及其叠氮化

以简单易得的原料、在温和的条件下高产率地合成了氮原子桥连杯[2]芳烃[2]三嗪化合物．室温下,碳酸钾为缚酸剂,利用三聚氯氰和对苯二胺的亲核取代反应合成主体,并首次将其叠氮化,反应温度为40℃．产物通过元素分析,红外光谱和氢谱对其结构进行表征．从而验证了合成路线的可行性,并得出了较佳的工艺条件．     

Synthesis of thiophene-capped [2]rotaxanes

Two types of thiophene-capped [2]rotaxanes, i.e., bithienyl (2T)- and bis(3,4-ethylenedioxythiophene)-yl (BEDOT)-capped [2]rotaxanes, were synthesized. The electron-deficient cyclophane of cyclobis(paraquat-p-phenylene) (CBPQT⁴⁺) was used as a macrocycle. Association constants for inclusion complexation of 2T- and BEDOT-derivatives with CBPQT⁴⁺ were obtained by ¹H NMR titration. Due to the donor-acceptor charge transfer absorption band, 2T- and BEDOT-capped [2]rotaxanes have red and green colors, respectively. On the basis of electrochemical analysis, we confirmed that only BEDOT-capped [2]rotaxane is a promising candidate for [3]rotaxane synthesis through oxidation coupling of the thiophene unit.     

Synthesis and reaction of 2,7-dimethylpyrrolo[1,2-A]quinoline with electrophilic reagents

2,7-Dimethylpyrrolo[1,2-a]quinoline (1) was synthesized from 2,6-dimethylquinoline and bromoaeetone via a Tsebitsehibabin reaction. The electrophilic substitution reactions of I, namely, nitrosation, acylation, diazonium coupling, formylation, bromination, and nitration were studied.     

Synthesis and self-assembly of novel oxacalix[2]arene[2]triazine amphiphiles

Heteracalixaromatics are an emerging generation of macrocyclic host molecules in supramolecular chemistry. As a typical example of heteracalixaromatics, oxacalix[2]arene[2]triazine adopts a shape-persistent 1,3-alternate conformation and can be easily functionalized. Taking it as a platform, a series of oxacalix[2]arene[2]triazine-based amphiphiles bearing long alkyl chains were synthesized through post-macrocyclization functionalization or 3+1 fragment coupling protocols. The self-assembly behavior of these amphiphiles in a mixture of tetrahydrofuran (THF) and water was investigated. Dynamic light scattering (DLS) measurements revealed that the size of the self-assembled aggregates is dependent on the structure of the amphiphiles. The long alkyl chain substituents and/or intermolecular hydrogen bonds were found to promote the self-assembly.     

Synthesis and structure characterization of unsymmetrical oxacalix[2]benzene[2]pyrazines

The synthesis of two unsymmetrically linked oxacalix[2]benzene[2]pyrazines (1 and 2) is described. X-ray single crystal structure analysis revealed a highly distorted 1,3-alternate conformation of compound 1 (containing ortho- and meta-diphenol components) and a distorted boat conformation of compound 2 (containing meta- and para-diphenol components). Oxacalix[2]benzene[2]pyrazine containing both ortho- and para-diphenol components was not obtained via similar synthetic strategy.     

1.3.2.4.5-dioxadithiazin-2.2.4.4-tetraoxides - new reagents for [2+2] - and [2+4]-cycloadditions to olefins

The titled compounds react with olefins under mild conditions to give 1.2-thiazetidin-1.1-dioxides and/or 1.4.5-oxathiazin-4.4-dioxides being formal versatile sources of 1.2- and 1.4-dipoles. Relation of these paths changes widely depending upon structural effects of alkenes and conditions of the reaction.     

Synthesis of symmetric macrocyclic diesterdihyrazides using successive [2+1]- and [1+1]-condensations

Potentially useful symmetric macrocyclic diesterdihydrazides were synthesized efficiently from available petrochemical products (tetrahydropyran and 4-methyltetrahydropyran) using successive [2+1]-condensation of 8-hydroxyoctan-2-one and its 6-methyl derivative with glutaric and adipic chlorides and [1+1]-condensation of the intermediate diketodiesters with glutaric dihydrazide.