Modulating properties of aqueous sodium dodecyl sulfate by adding hydrophobic ionic liquid

Altering and modifying important physicochemical properties of aqueous surfactant solutions is highly desirable as far as potential applications of such systems are concerned. Changes in the properties of aqueous solutions of a common anionic surfactant sodium dodecyl sulfate (SDS) are assessed in the presence of a common and popular 'hydrophobic' ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate (bmimPF(6)). Upon addition of up to approximately 0.10 wt% bmimPF(6), a dramatic decrease in critical micelle concentration (cmc) is accompanied by an increase in the degree of counterion dissociation (alpha) and micellar aggregation number (N(agg)) indicating micellar growth. However, in the range 0.10 wt% < or = bmimPF(6) 2.00 wt%, relatively gradual decrease in alpha and N(agg) is observed along with no change in cmc. Significantly decreased microfluidity of the aqueous SDS solutions on addition of bmimPF(6) is indicated by a fluorescence microviscosity probe 1,3-bis-(1-pyrenyl)propane which suggests partitioning of bmimPF(6) into the SDS micellar phase. Behavior of solvatochromic fluorescence probes, pyrene, pyrene-1-carboxaldehyde, and 2-(p-toluidino)naphthalene-6-sulfonate, confirms interaction, and possible complexation, between IL bmimPF(6) and anionic micellar surface. Increased solubility of bmimPF(6) with increasing SDS concentration further confirms SDS-bmimPF(6) interactions. Presence of strong electrostatic attraction between bmim(+) and anionic micellar surface is proposed to be the most dominant reason for these observations. All-in-all, unique role of a hydrophobic ionic liquid bmimPF(6) in modifying the properties of aqueous anionic sodium dodecyl sulfate is demonstrated.     

Study of Ligand Substitution Reactions at Pentacyanoferrates(II) in Aqueous Salt and Micellar Solutions

The ligand substitution reactions Fe(CN)(5)(4-(t)bupy)(3-) + 4-CNpy and Fe(CN)(5)(4-(t)bupy)(3-) + pzCO(2)(-) (4-(t)Bupy = 4-tert-butylpyridine; 4-CNpy = 4-cyanopyridine; pzCO(2)(-) = pyrazinecarboxylate) were studied in several aqueous salt and micellar solutions. Kinetic data in aqueous solutions showed that the two processes follow a dissociative mechanism, D, and the dependence of the first-order rate constants on [salt] on electrolyte aqueous solutions allow the estimation of the activation volumes corresponding to both reactions. Under true first-order conditions no kinetic micellar effects were found in anionic (SDS) and nonionic (Triton X-100) aqueous micellar solutions. In cationic micellar solutions (CTAB, CTAC, and TTAB) small kinetic micellar effects were found. These were related to the different ionic concentrations and the different polarity and structure of the Stern layer surrounding the cationic micellar aggregates, where the reactions take place, with respect to pure water. Copyright 2000 Academic Press.     

Fluoride ion sensing by an anion-π interaction

We report the discovery of a supramolecular interaction (anion-π and charge/electron transfer, CT/ET) involving fluoride ion and π-electron deficient colorless naphthalene diimide (NDI) receptors. Strong electronic interactions between lone-pair electrons of F(-) ion and π*-orbitals of the NDI unit lead to an unprecedented F(-)→NDI ET event, which produces an orange colored NDI(?-) radical anion. Further reduction of NDI(?-) by another F(-) ion produces a pink colored NDI(2-) dianion, rendering NDI a colorimetric F(-) sensor. Preorganization of two NDI units in overlapping positions using folded linkers improves their selectivity and sensitivity for the F(-) ion significantly, allowing F(-) detection at nM concentration in 85:15 DMSO/H(2)O solutions.     

Recognition of phosphate monoester dianion by an alkoxide-bridged dinuclear zinc(II) complex

Recognition of phosphate monoester dianion by an alkoxide-bridged dinuclear zinc(II) complex (Zn2L3+) has been studied (L = alkoxide species of 1,3-bis[bis(pyridin-2-ylmethyl)amino]propan-2-ol). Potentiometric pH titration study disclosed a 1 : 1 phenyl phosphate complexation with Zn2L3+ in aqueous solution. The dissociation constant (= [Zn2L3+][PhOPO3(2-)]/[Zn2L3+-PhOPO3(2-)]) is an extremely small value of 2.5 x 10(-8) mol dm(-3) at 25 degrees C with I = 0.10 (NaNO3). The X-ray crystal analysis of the dizinc(II) complex with p-nitrophenyl phosphate showed that the phosphate dianion binds as a bridging ligand to the two zinc(II) ions.     

Photometric, colorimetric, and acid-base characteristics of nitroso-R-salt

Optical and colorimetric characteristics of 1-nitroso-2-naphthol-3,6-disulfonic acid (nitroso-R-salt) are studied in aqueous solutions at pH 4–10. Equations of calibration plots are obtained as the colorimetric functions of the concentration, and the molar coefficients of the colorimetric functions are calculated. The dissociation constants of nitroso-R-salt are determined by colorimetry at an ionic strength of 0.1–0.5, reduced to zero ionic strength, and compared with the literature data. Advantages of colorimetry over spectrophotometry in the determination of the dissociation constants of colored reagents are demonstrated.     

Acetonimine and 4-imino-2-methylpentan-2-amino platinum(II) complexes: synthesis and in vitro antitumor activity

The reaction of [Pt(dmba)(PPh3)Cl] [where dmba = N,C-chelating 2-(dimethylaminomethyl)phenyl] with aqueous ammonia in acetone in the presence of AgClO4 gives the acetonimine complex [Pt(dmba)(PPh3)(NH=CMe2)]ClO4 (1). The reaction of [Pt(dmba)(DMSO)Cl] with aqueous ammonia in acetone in the presence of AgClO4 gives a mixture of [Pt(dmba)(NH=CMe2)2]ClO4 (2) and [Pt(dmba)(imam)]ClO4 (3a) (where imam = 4-imino-2-methylpentan-2-amino). [Pt(dmba)(DMSO)Cl] reacts with [Ag(NH=CMe2)2]ClO4 in a 1:1 molar ratio to give [Pt(dmba)(DMSO)(NH=CMe2)]ClO4 (4). The reaction of [Pt(dmba)(DMSO)Cl] with 20% aqueous ammonia in acetone at 70 degrees C in the presence of KOH gives [Pt(dmba)(CH2COMe)(NH=CMe2)] (5), whereas the reaction of [Pt(dmba)(DMSO)Cl] with 20% aqueous ammonia in acetone in the absence of KOH gives [Pt(dmba)(imam)]Cl (3b). The reaction of [NBu4]2[Pt2(C6F5)4(mu-Cl)2] with [Ag(NH=CMe2)2]ClO4 in a 1:2 molar ratio produces cis-[Pt(C6F5)2(NH=CMe2)2] (6). The crystal structures of 1 x 2 Me2CO, 2, 3a, 5, and 6 have been determined. Values of IC50 were calculated for the new platinum complexes against a panel of human tumor cell lines representative of ovarian (A2780 and A2780 cisR) and breast cancers (T47D). At 48 h incubation time complexes 1, 4, and 5 show very low resistance factors against an A2780 cell line which has acquired resistance to cisplatin. 1, 4, and 5 were more active than cisplatin in T47D (up to 30-fold in some cases). The DNA adduct formation of 1, 4, and 5 was followed by circular dichroism and electrophoretic mobility.     

Solvation in binary mixtures of water and polar aprotic solvents: theoretical calculations of the concentrations of solvent-water hydrogen-bonded species and application to thermosolvatochromism of polarity probes

Thermo-solvatochromism of two polarity probes, 2,6-diphenyl-4-(2,4,6-triphenyl- pyridinium-1-yl)phenolate, RB, and 2,6-dichloro-4-(2,4,6-triphenylpyridinium-1-yl) phenolate, WB, in aqueous acetone, Me2CO, and aqueous dimethylsulfoxide, DMSO, has been studied. The data obtained have been analyzed according to a recently introduced solvation model that explicitly considers the presence of 1:1 organic solvent-water hydrogen-bonded species, S-W, in the bulk binary mixture and its exchange equilibria with (S) and (W) in the solvation shell of the probe. Calculations require reliable values of Kdissoc, the dissociation constant of S-W. Previously, this has been calculated from the dependence of the densities of binary solvent mixtures on their composition. Using iteration, the volume of the hydrogen-bonded species, VS-W, and Kdissoc were obtained simultaneously from the same set of experimental data. This approach may be potentially suspect because Kdissoc, and VS-W are highly correlated. Therefore, we extended a recently introduced approach for the calculation of Valcohol-W to binary mixtures of water with acetone, acetonitrile, N,N-dimethylformamide, DMSO, and pyridine. This approach includes: Determination of VS-W from ab initio calculations by the COSMO solvation model; correction of these volumes for the nonideal behavior of the binary solvent mixtures at different temperatures; use of corrected VS-W as a constant (not an adjustable parameter) in the equation that is employed to calculate Kdissoc (from density versus binary solvent composition). Solvation of RB and WB by Me2CO-W showed different behavior from that of aqueous DMSO. Thus, water is able to displace Me2CO more efficiently than DMSO from the probe solvation shell. Me2CO-W and DMSO-W displace their corresponding precursor solvents; this is more efficient for the former case because the strong DMSO-W interactions attenuate the solvation capacity of this species. Temperature increase resulted in desolvation of both probes, due to concomitant decrease of the structures of the component solvents.     

UV-vis spectroscopic study of interaction of metal ions with the E(T)(30) dye involving micellar media

Interaction between 3d-transition metal ions (Mn2+, Fe2+, Fe3+, Co2+, Ni2+, Cu2+ and Zn2+) and the E(T)(30) dye, 2,6-diphenyl-4-(2,4,6-triphenyl 1-pyridino)phenolate in aqueous medium have been studied by distributing the dye between the aqueous and micellar phase formed by cationic surfactant cetyltrimethylammonium bromide(CTAB). Values of equilibrium constant K for the dye-metal ion interaction and the partition coefficient of the dye between the micellar and the aqueous phase have been determined. K values show a systematic correlation with ionic potential of metal ions.     

The repulsive Coulomb barrier along a dissociation path of the BeC(2-)(4) dianion

We present ab initio calculations of the repulsive Coulomb barrier for several geometrically stable isomers of the BeC(2-)(4) dianion. We describe how the deformation of certain isomers can account for the experimental Coulomb explosion images of the dianion. For the most stable linear isomer, C(-)(2)BeC(-)(2), we examined the electron tunneling process along the dissociation path to obtain C(-)(2) plus BeC(-)(2). We found the crossing point for autodetachment to be R(c)(dis)= 3.25 A. R(dis) is the bond length between C(-)(2) and BeC(-)(2); at this point, the electron tunneling energy is equal to the maximum of the repulsive Coulomb barrier. In the framework of the Wenzel-Kramer-Brioullin theory, the electron-loss lifetime of the metastable C(-)(2)BeC(-)(2) dianion at the equilibrium geometry, R(dis) = 1.64 A, was estimated to be about 5 ms. This lower limit is in agreement with the experimental results in which the BeC(2-)(4) dianion has a lifetime much longer than 5 micros.     

The effects of high concentrations of aqueous tetramethylammonium chloride and other salts on the dissociation of phenylphosphonic acid and on the enolization of acetone

The dissociation constants of benzoic acid and phenylphosphonic acid have been determined in aqueous solutions containing tetramethylammonium chloride at concentrations up to 15 and 13 molal, respectively. The second dissociation constant of phenylphosphonic acid has also been determined in concentrated solutions of alkali halides. Whereas the organic electrolyte increases the observed pK values of the acids, the inorganic electrolyte idecrease them. The rate of enolization of acetone, catalyzed by phenylphosphonate dianion is increased by the presence of tetramethylammonium chloride, but is decreased by the presence of inorganic salts, in accordance with the changes in the apparent acidity constants of phenylphosphonate monoanion that the two different kinds of electrolyte bring about. The slope of the Brónsted plot for the inorganic salts is 0.76; that for the organic electrolyte is 0.46. Non-quaternary ammonium salts also increase the rate of the phenylphosphonate dianion catalyzed enolization of acetone, but this appears to be due to a considerable extent to the formation of reactive iminium ion intermediates.     

The acidity constants of some pyrimidine bases in various water-organic solvent media

The acid ionization constants of some pyrimidine bases of nucleic acids were determined pH-metrically at 25 degrees C and at the constant ionic strength I = 0.10 mol l(-1) (KNO3) in pure water as well as in aqueous media containing variable mole percentages (5-30%) of organic solvents. The organic solvents used were methanol, ethanol, N,N-dimethylformamide (DMF), dimethylsulfoxide (DMSO), acetonitrile, acetone and dioxane. The results obtained indicated that the acidity constants are generally decreased as the content of an organic solvent in the medium is increased. It was deduced that the hydrogen bonding interactions and the solvent basicity in addition to the electrostatic effect are the major effects influencing significantly the acid ionization process of pyrimidine bases in the different water-organic solvent media. Some thermodynamic parameters (deltaH, deltaG degrees, deltaS degrees) of the ionization process over the temperature range 5-45 degrees C in pure water were also determined and discussed.     

Protolytic Properties of Thiofluorescein and Its Derivatives

Ionization constants of thiofluorescein, 4-nitro-, 4,5-dinitro-, 2,4,5,7-tetrabromo-, and 2,4,5,7-tetraiodothiofluoresceins, and also of 4,5-dibromofluorescein and N-ethyl-4,5-dinitroazafluorescein in 50 wt % aqueous ethanol have been determined. The electronic absorption spectra of their ionic and molecular forms have been recorded and analyzed. The behavior of these dyes can be described in terms of the scheme of prototropic equilibria proposed previously for fluorescein and its halo derivatives.     

Novel pyrimidine-bridged platinum(II) complexes: multinuclear magnetic resonance spectroscopy and crystal structures of (NR4)2[(PtCl3)2(mu-pyrimidine)] and cis- and trans-[Pt(R2SO)Cl2]2(mu-pyrimidine)

Two new types of pyrimidine-bridged Pt(II) complexes, (NR4)2[(PtCl3)2(mu-pm)] and cis- and trans-[Pt(R2SO)Cl2]2(mu-pm) where pm = pyrimidine, were synthesized and characterized by IR and multinuclear magnetic resonance spectroscopies and by crystallographic methods. Compounds with dimethylsulfoxide, tetramethylenesulfoxide, di-n-propylsulfoxide (DPrSO), di-n-butylsulfoxide (DBuSO), dibenzylsulfoxide (DBzSO), and diphenylsulfoxide were studied. The aqueous reaction of K2PtCl4 with pyrimidine produced the [(PtCl3)2(mu-pm)](2-) ions, which can be precipitated with a NR4(+) salt. The aqueous reaction of K[Pt(R2SO)Cl3] with pyrimidine in a 2:1 ratio produced the dinuclear species trans-[Pt(R2SO)Cl2]2(mu-pm). With DBuSO and DBzSO, the analogous cis isomers were also obtained. The 195Pt NMR resonances of the trans dimeric complexes were observed at higher field (av -3088 ppm) than the cis compounds (av -2948 ppm). The 195Pt coupling constants with the atoms of pyrimidine 3J(195Pt-1H) and 3J(195Pt-13C) are larger in the cis configuration than in the trans analogues. The crystal structures of two ionic complexes, (NR4)2[(PtCl3)2(mu-pm)] (R = Me and n-Bu), and of three mixed-ligands dimers, trans-[Pt(R2SO)Cl2]2(mu-pm) (R2SO = DMSO, DPrSO) and cis-Pt(DBuSO)Cl2]2(mu-pm), were determined.     

STUDIES ON THE CHEMILUMINESCENCE OF LUMINOL IN DIMETHYLSULFOXIDE AND DIMETHYLSULFOXIDE-WATER MIXTURES*

Abstract— The absorption, fluorescence, and chemiluminescence (CL) characteristics of luminol have been studied in basic dimethylsulfoxide (DMSO) and various basic DMSO — water mixed solvents. It has been shown that the luminol dianion can be produced quantitatively in carefully deoxygenated ‘dry’ DMSO using potassium t-butyl alcoholate (BTO) as the base. A direct correlation has been found between the intensity of CL and the concentration of luminol dianion, Indicating that the dianion is the reactive species in the chemiluminescent reaction in DMSO. Increasing concentrations of water in the mixed solvents greatly reduced the CL intensity because of the decrease in luminol dianion concentration. Solvent effects on the fluorescence of 3-aminophthalic acid samples was noted and identified. Chemiluminescent spectra of luminol were run as a function of solvent composition, and compared with fluorescence spectra in the same media. The need for correcting these spectra for comparison was noted. Stopped flow kinetic studies were run in DMSO and DMSO-water mixtures. These data can be interpreted on the basis of two second-order steps and one first-order step in the reaction. The first-order step is probably last and probably arises from decomposition of a ‘peroxy’ intermediate. The rate constant for this step is k= 1·2±0·3×10^-1 sec^-1.     

Molecular manipulation of two- and three-dimensional silica nanostructures by alkoxysilylation of a layered silicate octosilicate and subsequent hydrolysis of alkoxy groups

A novel methodology for constructing molecularly ordered silica nanostructures with two-dimensional (2-D) and three-dimensional (3-D) networks has been developed by using a stepwise process involving silylation of a layered silicate octosilicate with alkoxytrichlorosilanes [ROSiCl(3), R = alkyl] and subsequent reaction within the interlayer spaces. Alkoxytrichlorosilanes react almost completely with octosilicate, bridging two closest Si-OH (or -O(-)) sites on the silicate layers, to form new five-membered rings. The unreacted functional groups, Si-Cl and Si-OR, are readily hydrolyzed by the posttreatment with a water/dimethyl sulfoxide (DMSO) or water/acetone mixture, leading to the formation of two types of silicate structures. The treatment with a water/DMSO mixture produced a unique crystalline 2-D silicate framework with geminal silanol groups, whereas a water/acetone mixture induced hydrolysis and subsequent condensation between adjacent layers to form a new 3-D silicate framework. The 2-D structure is retained by the presence of DMSO molecules within the swelled interlayer spaces and is transformed to a 3-D silicate upon desorption of DMSO. The structural modeling suggests that both of the 3-D silicates contain new cagelike frameworks where solvent molecules are trapped even at high temperature (up to 380 degrees C, in the case of acetone). Both 2-D and 3-D silica structures are quite different from known layered silicates and zeolite-like materials, indicating the potential of the present approach for precise design of various silicate structures at the molecular level.     

Counterion-induced transformations of cationic surfactant micelles studied by using the displacing effect of solvatochromic pyridinium N-phenolate betaine dyes

In this paper, we demonstrate that the behavior of a set of eight large-sized negatively solvatochromic pyridinium N-phenolate betaine dyes reflects the principle transformations, occurring in aqueous micellar solutions of three cationic surfactants. As surfactants, cetyltrimethylammonium bromide (CTAB), n-octadecyltrimethylammonium chloride (OTAC), and N-cetylpyridinium bromide (CPB) were used. Normally, for such probes coupled with micelles, a red shift of the vis absorption band is expected as a result of a hydrophobization ("drying") of the micellar interface. However, under addition of electrolytes with anions such as tosylate, salicylate, and some n-alkanesulfonates or n-alkanecarboxylates to the micellar solutions, an unexpected effect was observed. Instead of a red shift, a blue shift of the vis absorption band of some of the dissolved betaine dyes was registered, as compared with the spectrum measured in pure aqueous micellar solutions of CTAB, OTAC, or CPB (Deltalambda(max) up to ca. 80 nm). This blue shift, indicating an increase in the polarity of the dye microenvironment, is explained by displacing the large dye dipoles from the thinned micelles toward the aqueous phase. The effect is well expressed at concentrations of C(betaine dye) approximately 10(-5) M, C(cationic surfactant) approximately 0.001 M, and C(organic anion) approximately 0.01 M. Transmission electron microscopy of dried samples confirms the distinct changes occurring in the studied micellar systems upon the addition of organic anions. The excess of inorganic salts [C(NaBr, KBr, or KCl) = 0.5-4.0 M] restored the position of the vis absorption band or even shifted it toward the red. Moreover, some of the betaine dyes studied (i.e., the more hydrophobic ones) stay in the micellar pseudophase or precipitate under the aforementioned concentration conditions. The peculiarities of the behavior of these betaine dyes are in agreement with their molecular structure.     

Molecular structure and vibrational spectra of phenolphthalein and its dianion

Infrared (IR) and Raman spectra of phenolphthalein (PP) and its dianion form (sodium and potassium salts) were studied both in the solid state and in aqueous solution. Band assignments were carried out on the basis of the isotope shifts of the ring deuterated and 13C-substituted derivatives. Spectral analyses reveal that the PP dianion exists as mixtures of the benzenoid form (colorless) and the quinonoid form (colored) in the solid state and in aqueous solution, while the neutral PP solely takes the gamma-lactone form. This work provides the first vibrational spectroscopic evidence for the coexistence of the two species in the PP dianions.     

Bicarbonate surfoxidants: micellar oxidations of aryl sulfides with bicarbonate-activated hydrogen peroxide

The mechanism and kinetics of bicarbonate-catalyzed oxidations of sulfides by H(2)O(2) at the aqueous /cationic micellar interface have been investigated. The general term surfoxidant is introduced to describe the combination of an ionic surfactant with a reactive counterion that is itself an oxidant or activates an oxidant from the bulk solution to form an oxidant counterion. It is shown that the new catalytic cationic surfoxidant CTAHCO(3) (cetyltrimethylammonium bicarbonate) significantly enhances the overall oxidation rates as compared to the addition of bicarbonate salts to CTACl and CTABr, for which the halide counterions must undergo equilibrium displacement by the oxidant anion (peroxymonocarbonate, HCO(4)(-)). General equations based on the classic pseudophase model have been derived to account for the preequilibrium reaction in the aqueous and micellar phases, and the resulting model can be used to describe any micellar reaction with associated preequilibria. Rate constants and relevant equilibrium constants for HCO(4)(-) oxidations of aryl sulfides at micellar surfaces have been estimated for CTAHCO(3), CTACl, and CTABr. The second-order rate constants in the Stern layer (k(2)(m)) for sulfide oxidations by HCO(4)(-) are estimated to be approximately 50-fold (PhSEtOH) and approximately 180-fold (PhSEt) greater than the background rate constant k(m)(0) for oxidation by H(2)O(2) at the micellar surface. The estimated values of k(2)(m) are lower than the corresponding values in water by a factor of 20-70 depending on the substrate, but the high local concentration of the bicarbonate activator in the surfoxidant and the local accumulation of substrate as a result of strong binding to the micelle lead to a net increase in the observed reaction rates. Comparisons of CTAHCO(3)-activated peroxide to other highly reactive oxidants such as peroxymonosulfate (HSO(5)(-)) in aqueous surfactant media suggest a wide variety of potential applications for this green oxidant.     

Concentration-dependent dual behavior of hydrophilic ionic liquid in changing properties of aqueous sodium dodecyl sulfate

Modifying physicochemical properties of aqueous surfactant solutions in favorable fashion by addition of environmentally benign room-temperature ionic liquids (ILs) has enormous future potential. Due to its unusual properties, an IL may demonstrate a unique role in altering the properties of aqueous surfactant solutions. Changes in the properties of aqueous sodium dodecyl sulfate (SDS), an anionic surfactant, upon addition of a common and popular "hydrophilic" ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate [bmim][BF4] are presented. Addition of low concentrations of [bmim][BF4] (i.e., 相似文献   

Structure and dynamics of poly(oxyethylene) cholesteryl ether wormlike micelles: rheometry, SAXS, and cryo-TEM studies

In this article, we provide direct evidence for 1-D micellar growth and the formation of a network structure in an aqueous system of poly(oxyethylene) cholesteryl ether (ChEO(20)) and lauryl diethanolamide (L-02) by rheometry, small-angle X-ray scattering (SAXS), and cryo-transmission electron microscopy (cryo-TEM). The ChEO(20) self-assembles into spheroid micelles above the critical micelle concentration and undergoes a 1-D microstructural transition upon the incorporation of L-02, which because of its lipophilic nature tends to be solubilized into the micellar palisade layer and reduces the micellar curvature. The elongated micelles entangle with each other, forming network structures of wormlike micelles, and the system shows viscoelastic properties, which could be described by the Maxwell model. A peak observed in the zero-shear viscosity (η(0)) versus L-02 concentration curve shifted toward higher L-02 concentrations and the value of maximum viscosity (η(0?max)) increased with the increasing ChEO(20) mixing fraction with water. We observed that η(0?max) increased by 2 to 4 orders of magnitude as a function of the ChEO(20) concentration. The Maxwell relaxation time (τ(R)) shows a maximum value at a concentration corresponding to η(0?max) (i.e., τ(R) increases with L-02 concentration and then decreases after attaining a maximum value, whereas the plateau modulus (G(0)) shows monotonous growth). These observations demonstrate microstructural transitions in two different modes: L-02 first induces 1-D micellar growth and as a result the viscosity increases, and finally after the system attains its maximum viscosity, L-02 causes branching in the network structures. The microstructure transitions are confirmed by SAXS and cryo-TEM techniques.