Self-assembled Co(II) molecular squares incorporating the bridging ligand 4,7-phenanthrolino-5,6:5',6'-pyrazine

Three high-spin tetranuclear cobalt(II) complexes have been prepared with the bridging ligand 4,7-phenanthrolino-5,6:5',6'-pyrazine (ppz) through metal-ion directed self-assembly. The complexes differ by the incorporation of three different coordinating anions: chloride, thiocyanide and selenocyanide. The physical properties of these complexes have been investigated in detail.     

Large M4L4 (M = Al(III), Ga(III), In(III), Ti(IV)) tetrahedral coordination cages: an extension of symmetry-based design

As an extension to a rational design for the formation of self-assembled coordination cages, the syntheses for very large M4L4 tetrahedra based on a hexadentate 3-fold symmetric ligand (1,3,5-tris(4'-(2' ',3' '-dihydroxybenzamido)phenyl)benzene (H6L2)) are described. Four tetrahedral M4L2(4) assemblies (M = Al(III), Ga(III), In(III), Ti(IV)), with cavity sizes of around 450 A3, have been characterized by elemental analysis, NMR spectroscopy, and high-resolution electrospray mass spectrometry. Differences in chiral resolution and dynamic behavior of host-guest interactions with previously reported tetrahedral M4L(N)6 and M4L1(4) architectures are highlighted for the ligands 1,5-bis(2',3'-dihydroxybenzamido)naphthalene (H4L(N)) and 1,3,5-tris(2',3'-dihydroxybenzamido)benzene (H6L1). An even larger 3-fold symmetric ligand, 1,3,5-tris(4'-(2' ',3' '-dihydroxybenzamido)-1',1' '-biphenyl)benzene (H6L3) has been prepared but, due to increased flexibility and deviation from the intended 3-fold symmetry, does not undergo self-assembly to form the M4L3(4) structure.     

Synthesis of 4-formylphenyl 7-acetyl-8-oxononylcarbamate and europium complex based thereon

A new chelating ligand, 4-formylphenyl 7-acetyl-8-oxononylcarbamate, was synthesized starting from 4-hydroxybenzaldehyde and 6-chlorohexyl isocyanate. The reaction of this ligand with europium triisopropoxide gave the corresponding europium(III) complex.     

Design, synthesis and photoelectrochemical properties of hexagonal metallomacrocycles based on triphenylamine: [M6(4,4'-bis(2,2':6',2'-terpyridinyl)triphenylamine)6(X)12]; [M = Fe(II), PF6- and Zn(II), BF4-

Synthesis of a novel bis(terpyridine) ligand, 4,4'-bis(2,2':6',2'-terpyridinyl)triphenylamine, utilizing triphenylamine, as a specific angle controller, has led to the self-assembly of a unique hexagonal metallomacrocycle family, [Fe6(2)6(PF6)12] and [Zn6(2)6(BF4)12], utilizing terpyridine-metal(II)-terpyridine connectivity. The crystal structure of the novel ligand shows that the angle between the two terpyridinyl moieties is 119.69 degrees , which enabled the formation of the hexagonal-shaped macrocycles. The crystal packing architectures of this starting ligand revealed channels induced by solvent encapsulation. Following complexation of this ligand with transition metals [Fe(II) or Zn(II)] in a one-pot reaction, the resultant structures were characterized by (1)H and (13)C NMR, UV/Vis and mass spectroscopies. The expected metal-to-ligand charge transfer (MLCT; lambda(max) = 582 nm) and emission (lambda(em) = 575 nm) characteristics were exhibited by both [Fe6(2)6(PF6)12] and[Zn6(2)6(BF4)12]. The photoelectrochemical characteristics of these hexagonal metallomacrocycles demonstrate that they can be used as sensitizers in dye-sensitized solar cells.     

含有电子传输基团的双齿配体及铕配合物Eu(DBM)3(DPOP)的制备与发光性能的研究

1, 3, 4-oxadiazole-contanining ligand DPOP(DPOP=2-(11-dipyrido[3, 2-a: 2′, 3′-c]phenazine)-5-p-tolyl-1, 3, 4-oxadiazole) was synthesized by a convenient method and characterized by elemental analysis, IR, ¹H NMR. Then, corresponding Eu(Ⅲ) complex [Eu(DBM)₃(DPOP)] (DBM=1, 3-diphenyl-1, 3-propanedionate) was prepared and characterized by elemental analysis, IR. The photophysical properties of ligand and its europium complex were investigated. The ligand emitted at 443 nm. There were different PL spectra in solid state and in solution of Eu(DBM)₃(DPOP). There are two fluorescent peaks at 614 nm, 400 nm in dichloromethane solution of Eu(DBM)₃(DPOP), but in solid state only red emission was observed. This result indicated that efficient energy tranfer could take place from DPOP ligand to europium ion in Eu-complex solid.     

Thin films of cross-linked metallo-supramolecular coordination polyelectrolytes

We report on the synthesis of a new tristerpyridine ligand, tris(2,2':6',2' '-terpyridinyl-4'-oxymethyl)ethane (tritpy), as well as its introduction into metal ion induced self-assembly of cross-linked metallo-supramolecular coordination polyelectrolytes (MEPE). For cross-linking degrees of 9.5% and below, soluble homogeneous networks are obtained. The molar mass of the networks is large and depends on the cross-linking degree. Due to the charges in the MEPE, the soluble networks are suitable for film formation on the basis of layer-by-layer self-assembly and to study the details of film growth. UV-vis spectroscopy, X-ray reflectivity, AFM, and ellipsometry show that the film growth is linear and continuous. The multilayers exhibit no inner structure and have a very low surface roughness. The thickness of the adsorbed layer of MEPE networks is in the range of 3 nm. The important point is that an influence of cross-linking is not seen in multilayers, which is the opposite of what is observed for the MEPE in solution. Our experiments did not reveal an influence of the preparation procedure on the adsorption process, e.g., increasing the layer thickness.     

Structure, stability and relaxivity of trinuclear triangular complexes

The self-assembly of a carbonylpyridine-based heptadentate ligand with Ln(III) results in the formation of triangular trinuclear europium complexes, which exhibit interesting luminescent properties in the solid state and in solution. With a view to developing multimodal responsive systems, we report here the preparation and characterisation of analogous complexes with Gd(III). The X-ray crystal structure of Gd(3)L2(3) indeed reveals the isostructurality with the Eu(III) complexes. A combination of (1)H NMRD and variable temperature studies yields the parameters elucidating the exchange of coordinated water and relaxivity properties. Conveniently, the competitive spectrophotometric titrations with EDTA and NTA are used to determine the thermodynamic stability constants of the europium complexes in aqueous media. In addition, the exchange reaction with EDTA is monitored with NMR and fluorimetry. The interactions of the Eu(III) trinuclear complex with some potentially interfering ligands are qualitatively investigated by means of luminescence titrations.     

Self-assembly mechanism of a bimetallic europium triple-stranded helicate

We report the self-assembly process of a supramolecular edifice based on the coordination of europium(III) by a ditopic strand L bearing tridentate bis(benzimidazolyl)pyridine subunits. Varying the metal/ligand ratio and using a fruitful combination of electrospray mass spectrometry and absorption spectrophotometry, we characterized three major complexes (EuL(2), Eu(2)L(2), and Eu(2)L(3)) in acetonitrile. Kinetic investigations showed an alternative "braiding" and "keystone" mechanism leading to Eu(2)L(3). The formation mechanism of the dinuclear triple-stranded helicate, which is mainly governed by electrostatic interactions, goes via the "side-by-side" Eu(2)L(2) intermediate. Our thermodynamic and kinetic data allow the prediction of the apparent "magic" self-assembly of Eu(2)L(3) which is fast and efficient only under a strict set of conditions.     

Development of polymeric sensing films based on a tridentate bis(phosphinic amide)-phosphine oxide for detecting europium(III) in water

A novel europium(III) membrane luminescence sensor based on a tridentate bis(phosphinic amide)-phosphine oxide, PhPO(C(6)H(4)POPhN(CH(CH(3))(2))(2))(2) (1), is described. The new luminescent complex, [Eu(1)(2)]Cl(3)2, which is formed between europium(III) and ligand 1 and has a 1 : 2 stoichiometry, has been evaluated in solution. It has the excellent spectroscopic and chemical characteristics that make it appropriate for sensing film applications. All the parameters (polymer, plasticizer, ligand and ionic additive) that can affect the sensitivity and selectivity of the membrane sensor and instrumental conditions have been carefully optimized. The best sensing response (λ(exc) = 229.04 nm, λ(em) = 616.02 nm) was observed for 33.4 : 65.1 : 1.5 (%, w/w) PVC : DOS : 1. The sensing film shows a good response time (10 min) and a very good selectivity toward europium(III) with respect to other lanthanides(III) ions, such as La, Sm, Tb and Yb. The newly-developed sensing film has a linear range from 1.6 × 10(-7) to 5.0 × 10(-6) mol L(-1) for Eu ions with a very low detection limit (4.8 × 10(-8) mol L(-1)) and good sensitivity (9.41 × 10(-7) a.u. mol(-1) L(-1)) to europium. Complexes of [Eu(1)(2)]Cl(3) (2) and [Eu(1)]Cl(3) (4) were isolated by mixing ligand 1 with Eu(Cl(3))·6H(2)O in acetonitrile at room temperature in ligand : metal molar ratios of 1 : 2 and 1 : 1, respectively. The 1 : 1 derivative is the product of thermodynamic control when a molar ratio of ligand to europium salt of 1 : 1 is used. The new compounds have been characterized in both the solid form (IR, MS-TOF, elemental analysis, TGA and X-ray diffraction) and in solution (multinuclear magnetic resonance). In both europium complexes, the ligand acts as a tridentate chelate. Thermogravimetric (TG) studies demonstrated that neither complex 2 or 4 possess any water molecules directly bound to the lanthanide metal, which corroborates the X-ray structure. The investigation of the solution behaviour of the Y(III) complexes with pulsed gradient spin-echo (PGSE) NMR diffusion measurements showed that average structures with 1 : 1 and 1 : 2 stoichiometries are retained in acetonitrile solutions.     

Tuning the Structure and the Magnetic Properties of Metallo-supramolecular Polyelectrolyte-Amphiphile Complexes

Self-assembly of Fe(2+) ions and the rigid ditopic ligand 1,4-bis(2,2':6',2'-terpyridin-4'-yl)benzene results in metallo-supramolecular coordination polyelectrolytes (MEPE). Sequential self-assembly of MEPE and dialkyl phosphoric acid esters of varying chain length via electrostatic interactions leads to the corresponding polyelectrolyte-amphiphile complexes (PAC), which have liquid-crystalline properties. The PACs have a stratified architecture where the MEPE is embedded in between the amphiphile layers. Upon heating above room temperature, the PACs show either a reversible or an irreversible spin-crossover (SCO) in a temperature range from 360 to 460 K depending on the architecture of the amphiphilic matrix. As the number of amphiphiles per metal ion is increased in the sequence 1:2, 1:4, and 1:6, the temperature of the SCO is shifted to higher values whereas the amphiphile chain length does not have a significant impact on the SCO temperature. In summary, we describe in this article how the structure and the magnetic response function of PACs can be tailored through the design of the ligand and the composition. To investigate the structure and the magnetic behavior, we use X-ray scattering, X-ray absorption spectroscopy, differential scanning calorimetry, faraday-balance, and superconducting quantum interference measurements in combination with molecular modeling.     

Increased antenna effect of the lanthanide complexes by control of a number of terdentate N-donor pyridine ligands

Three europium complexes with the terdentate N-donor ligand 2,6-bis(1H-pyrazol-3-yl)pyridine (L) have been synthesized, and their crystal structures have been determined. The ligand/metal ratios in these complexes are 3, 2, and 1. The photophysical properties of the complexes indicate more efficient ligand sensitization of europium emission for the homoleptic complex.     

Synthesis and spectroscopic properties of rare earth picrate complexes with a new biphenylamide

The new ligand N-benzyl-2-{2'-[(benzyl-ethyl-carbamoyl)-methoxy]-biphenyl-2-yloxy}-N-ethyl-acetamide (L) and its complexes of rare earth picrates were synthesized. The complexes were characterized by elemental analysis, IR, UV-vis spectra and conductivity measurements. The fluorescence properties of the europium complex in solid state and in CHCl(3), ethyl acetate, acetone, acetonitrile and DMF were investigated. Under the excitation, the europium complex exhibited characteristic emissions of europium. The lowest triplet state energy level of the ligand indicates that the triplet state energy level of the ligand matches better to the resonance level of Eu(III) than Tb(III) ion.     

Studies on synthesis, infrared and fluorescence spectra of new europium (III) and terbium (III) complexes with an beta-diketonate-type ligand

A new beta-diketonate-type ligand, N-(2-amino-6-methyl-pyridinyl)ketoacetamide (L) and its complexes with europium (III) and terbium (III) were synthesized. The complexes were characterized by elemental analysis, infrared spectra and conductivity. The europium (III) and terbium (III)-ions were found to coordinate to the CO oxygen atoms and pyridine nitrogen atoms. The fluorescence properties of these complexes in solid, DMF and CH3OH were studied. The solvent factors influencing the fluorescent intensity are discussed.     

Dearomatization and functionalization of terpyridine by lutetium(III) alkyl complexes

Lutetium(III)-bis(alkyl) and -tris(alkyl) fragments supported by either 2,2':6',2' '-terpyridine or 4,4',4' '-tri-tert-butyl-2,2':6',2' '-terpyridine are not stable and undergo facile 1,3-alkyl migration under ambient conditions resulting in dearomatization and ortho (2' or 6') functionalization of the terpyridyl ligand, clearly demonstrating that the terpyridyl ligand framework is not as innocent as previously thought.     

Regulation of excitation and luminescence efficiencies of europium and terbium benzoates and 8-oxyquinolinates by modification of ligands

The opportunities of optimisation of luminance of the lanthanide compounds by modification of ligands are discussed. Variations of the excitation and luminescence efficiencies at introduction of nitro- (NO₂), sulfo- (SO₃⁻), hydroxy- (OH), amino- (NH₂), and phenylamino- (NHC₆H₅) groups in the aromatic ligands were studied. Investigation of luminescence and luminescence excitation spectra of europium and terbium compounds with 10 derivatives of benzoic acid, 2-furancarboxylic acid and their adducts with 1,10-phenanthroline and 2,2′-bipyridine was undertaken. Study of the spectra of lanthanide 8-oxyquinolinates was carried out also. Luminescence efficiencies were measured at 77 and 300 K. Paths of the energy transfer from the ligands to Ln³⁺ ion were examined. Influence of radicals on the energies of the ligand triplet states and on the energies of the ligand–metal charge transfer states (LM CTS) of europium compounds was analysed. High luminescence efficiencies of europium and terbium benzoates, and terbium anthranylates and salicylates were obtained. Effect of increasing the luminescence efficiencies of europium salicylates and 8-oxyquinolinates at introduction of acceptor nitro-and sulfo-groups in the ligand was revealed. Channel of dissipation of the excitation energy through the ligand π^*–n transition of europium and terbium nitro- and dinitrobenzoates was found. Influence of relative positions of the lowest triplet levels of two non-equivalent ligands of compound on the energy transfer to Eu³⁺ and Tb³⁺ ions was considered.     

A self-assembled, luminescent europium cholate hydrogel: a novel approach towards lanthanide sensitization

We propose a new self-assembly based strategy for the design of novel lanthanide based luminescent materials. In this approach a europium hydrogel is prepared and sensitization is achieved by doping the gel with pyrene in a non-coordinated fashion.     

Crystal structure and luminescence of lanthanide monodentate complexes [Ln(C(4)N(4)H(6)O)(2)(H(2)O)(6)]Cl(3) and [Ln(C(4)N(4)H(6)O)(2)(H(2)O)(3)(NO(3))(3)] (Ln = Tb or Eu)

New eight- and nine-coordinate luminescent europium(III) and terbium(III) complexes 1-4 with carbonyl group coordination have been prepared using the monodentate ligand (L) 2,4-diamino-6-hydroxy pyrimidine and characterized by X-ray and spectroscopic methods.     

Lanthanide-sensitized luminescence for the detection of tetracyclines

Organic chelates of lanthanide ions, priviously used to enhance the detection sensitivity of the ions, are now used for the sensitive detection of the ligands. When complexed with europium(III), tetracycline displays the broad-banded absorption characteristics of an organic ligand. The excited ligand undergoes intersystem crossing to a triplet state, and then transfers its energy to a 4f level within the europium(III) ion. the resulting narrow, line-like luminescence of the europium(III) ion has a peak intensity ten times greater than the peak intensity of the uncomplexed ligand. This lanthanide-sensitized luminescence technique is used to quantify tetracycline and two of its analogues. Detection limits are in the nanogram range. Experimental conditions are discussed.     

An Old Reaction with New Results: The Unexpected Formation of a Rare Earth Metal Cluster Containing Six Europium Atoms

Employing a standard protocol for the preparation of a trisbenzoylacetonato europium(III) complex with 4‐bromo benzoylacetone 2 as ligand, a new europium species was synthesized and characterized. The X‐ray crystal structure analysis revealed a new europium cluster consisting of six europiumcentres.     

New luminescent europium(III) chelates for DNA labeling

The new europium(III) chelate [2,2',2',2'-[[4'-(aminobiphenyl-4-yl)-2,2':6',2'-terpyridine- 6,6'-diyl]bis(methylenenitrilo)]tetrakis(acetato)] europium(III) (ATBTA-Eu3+) and its 4,6-dichloro-1,3,5-triazinyl and succinimidyl derivatives (DTBTA and NHS-ATBTA, respectively) were synthesized and characterized. Both labeling complexes DTBTA-Eu3+ and NHS-ATBTA-Eu3+ are luminescent. Especially DTBTA-Eu3+ is strongly luminescent, with a luminescence quantum yield of 9.1%, molar extinction coefficient of 3.1 x 10(4) cm(-1) M(-1) (335 nm), and luminescence lifetime of 1.02 ms. The excitation and emission maximum wavelengths of DTBTA-Eu3+ are 335 and 616 nm, respectively. The complex is very stable in aqueous buffers, with a conditional formation constant log K(DTBTA-Eu) of 25.0 at pH 8, and can be conjugated to DNA and proteins. The chelates are also highly resistant to thermal decomposition, photodegradation, and ozone oxidation. These properties prove that DTBTA-Eu3+ is suitable as a luminescence label in DNA assays.