温敏性丙烯腈共聚物纳米纤维膜的制备与性能

采用可逆加成断裂链转移可控/活性聚合方法合成了丙烯腈与N-异丙基丙烯酰胺(NIPAM)的嵌段共聚物,通过调控嵌段聚合反应时间可以获得一系列不同嵌段链长的共聚物,分子量分布在1.3左右.运用静电纺丝技术制备了所合成嵌段共聚物的纳米纤维膜,扫描电镜照片表明纳米纤维膜较为均匀且直径可调.研究了纳米纤维膜表面水接触角与荧光标记牛血清清蛋白的吸附现象,接触角结果证实共聚物纳米纤维膜具有一定的温度响应性,且疏水性嵌段的引入导致响应温度较PNIPAM有所降低;蛋白质吸附结果则表明温度较低时纳米纤维膜表面更亲水,蛋白质吸附较少.所制备的温敏性纳米纤维膜可望用作智能分离与吸附材料.     

基于温度/pH双响应的聚合物表面活性剂调控嵌段共聚物微球形貌

研发响应多重外界刺激而改变形貌的嵌段共聚物微球对发展新型智能材料具有重要意义.本工作提出了一种温度/pH双响应嵌段共聚物微球形貌转变的策略.在利用乳液挥发法制备聚苯乙烯-b-聚(4-乙烯基吡啶)(PS-b-P4VP)微球时,引入温度/pH双响应的聚丙烯酸-b-聚(N-异丙基丙烯酰胺)(PAA-b-PNIPAM)作为表面活性剂,通过调控实验温度以及水相的pH值,实现了PS-b-P4VP微球在蚕蛹状、草莓状、洋葱状等形貌之间的转变.这种独特的形貌转变依赖于温度/pH调控的PAA-b-PNIPAM的亲疏水性转变,以及由此导致的表面活性剂在界面分布位置的改变,进而改变了油水界面的界面选择性以及微球的形貌.通过改变PAA-b-PNIPAM的质量分数、PAA和PNIPAM的嵌段比,系统地研究了温度/pH对PS-b-P4VP微球形貌转变机制的影响.提供了一种温度/pH双响应的微球形貌转变的策略,有望在药物释放、智能传感等领域发挥重要作用.     

聚苯乙烯-g-聚氧乙烯接枝共聚物表面阻抗蛋白质吸附的研究

利用放射性碘标记技术研究了血浆蛋白质-缓冲溶液体系在聚苯乙烯-g-聚氧乙烯接枝共聚物表面的等温吸附和吸附动力学。材料表面蛋白质等温吸附量或平衡吸附量随表面PEO含量增加而下降;吸附量最低值小于0.25μg,cm^-2;同时探讨了材料表面”梳状“结构对材料表面PEO侧链阻抗蛋白质性能的影响。     

聚合物链长及表面吸附强度对三维受限下嵌段共聚物微观相分离的影响

利用动态密度泛函(Dynamic density functional theory, DDFT)方法研究了三维受限下嵌段共聚物的微观相分离, 讨论了共聚物链长和表面吸附强度对微观相形成与取向的影响. 体系中随机分布的等径微球提供三维限制结构, 体积分数为0.6. 增加微球的半径和体积分数, 能够使其从破坏微相规整结构的纳米掺杂过渡到提供三维限制结构. 调整嵌段共聚物与微球表面的相互作用对微相形成与取向有重要影响.     

聚合物模板微球表面电性对中空二氧化硅微球形貌的影响

分别以过硫酸钾和偶氮二异丁基脒盐酸盐为引发剂,以聚乙烯吡咯烷酮(PVP)为分散剂,在水中引发苯乙烯聚合制备了2种表面分别带负电性和正电性基团的聚苯乙烯(PS)模板微球.在氨水催化下,利用正硅酸乙酯的水解缩合,形成PS/SiO_2复合微球,去除模板后得到中空SiO_2微球,并对其进行FTIR、电子显微镜、TGA以及氮气吸附等分析表征.结果表明,PS模板微球表面的电性决定了OH-的分布,从而导致PS模板微球表面SiO_2壳层不同的形成机制.当以表面带负电的PS微球为模板时,可得到树莓状的中空SiO_2微球;而以表面带正电的PS微球为模板时,得到是表面光滑的,具有介孔结构的中空SiO_2微球.     

两亲聚合物表面的反相气相色谱分析

采用反相气相色谱探针技术研究了苯乙烯－氧乙烯－苯乙烯三嵌段两亲聚合物的表面物理化学性质。包括表面吸附热力学函数,表面能的色散分量以及表面分子链与探针的分子间相互作用,。探讨了共聚物中亲油性链段聚苯乙烯（PS）和亲水性链段聚氧乙烯（PEO）的组成比例与其表面性质的关系。结果表明共聚物表面组成中随PEO含量的增加,其表面能增大,表面分子链与探针分子的相互作用增强,表面吸附能力也增强。     

聚四氢呋喃-聚甲基丙烯酸甲酯两嵌段共聚物的结晶行为

报导了系列聚四氢呋喃-聚甲基丙烯酸甲酯结晶-非晶(硬段型)两嵌段共聚物的结晶行为，结果表明，其微相分离和结晶规律与文献上唯一进行过系统研究的同类嵌段共聚物(PEO－b－PS)都有较大的差别；结晶段结晶能力的大小是制约这类体系微相分离和结晶规律的一个重要因素．     

聚苯乙烯/银核/壳复合微球的制备及其表征

通过分散聚合法制备了单分散性好,粒径均一的聚苯乙烯(PS)微球.以PS微球为核,用浓硫酸进行表面改性,使其表面带有负电.加入一定量的[Ag(NH3)2]+溶液,由于静电吸引,使其吸附在PS微球表面,通过化学还原的方法制备了PS/Ag核/壳结构复合微球.采用透射电镜(TEM)、扫描电镜(SEM)、红外光谱(IR)、X射线衍射(XRD)以及紫外-可见光谱对PS/Ag复合微球进行表征.结果表明:通过PS微球的表面改性,在其表面引入了磺酸基团,提高了微球表面的电负性和亲水性,对包覆过程起到了很好的促进作用;通过稳定剂(PVP)和不同还原剂(一缩二乙二醇DEG和乙二醇EG)的使用,形成的PS/Ag核/壳复合微球形貌不一样,同时研究表明制备出的PS/Ag复合微球可以用于催化剂催化还原有机染料溶液,表现出很好的催化活性.     

嵌段质量分数对手性超分子螺旋结构自组装的影响

首先,以溴代聚乙二醇单甲醚(PEO-Br)为引发剂、甲基丙烯酸丁酯(BMA)为单体,通过原子转移自由基聚合(ATRP)制备了一系列具有不同聚乙二醇(PEO)质量分数的聚甲基丙烯酸丁酯-b-聚乙二醇嵌段共聚物(PBMA-b-PEO)。在此基础上,将手性酒石酸(TA)以氢键的方式选择性掺入到嵌段共聚物的PEO相中,诱导嵌段共聚物自组装制备具有手性螺旋结构的复合薄膜PBMA-b-PEO/TA。利用小角X射线散射(SAXS)、透射电子显微镜(TEM)和圆二色光谱(CD)对嵌段共聚物复合薄膜进行表征,研究了嵌段质量分数对手性诱导嵌段共聚物螺旋结构自组装的影响。结果表明:掺入TA与嵌段共聚物质量比为0.12、0.15的TA,当PEO质量分数为0.17～0.24时,有利于嵌段共聚物相分离形成柱状螺旋结构;当PEO质量分数增加至0.26时,嵌段共聚物自组装则形成层状结构,在分子间氢键作用下虽然发生手性转移,但无法得到螺旋结构。     

SEOS/h-PEO共混物薄膜的微观分相结构

采用透射电子显微镜(TEM)观察由结晶性均聚物聚氧乙烯(h-PEO)与半结晶性嵌段共聚物聚苯乙烯-嵌-聚氧乙烯-嵌-聚苯乙烯(SEOS)组成的干、湿刷共混物薄膜结构.结果表明:4种共混系统的薄膜结构均由嵌段PEO和PEO均聚物组成球形PEO分散相;随着均聚物含量的增加,PEO分散相尺寸逐渐增大;当均聚物质量分数增大到33.3%时,在聚苯乙烯(PS)连续相中形成了类似胶束的"核-壳"结构.     

Adsorption of poly(ethylene oxide)-b-poly(epsilon-caprolactone) copolymers at the silica-water interface

The adsorption of amphiphilic poly(ethylene oxide)-b-poly(epsilon-caprolactone) and poly(ethylene oxide)-b-poly(gamma-methyl-epsilon-caprolactone) copolymers in aqueous solution on silica and glass surfaces has been investigated by flow microcalorimetry, small-angle neutron scattering (SANS), surface forces, and complementary techniques. The studied copolymers consist of a poly(ethylene oxide) (PEO) block of M(n) = 5000 and a hydrophobic polyester block of poly(epsilon-caprolactone) (PCL) or poly(gamma-methyl-epsilon-caprolactone) (PMCL) of M(n) in the 950-2200 range. Compared to homoPEO, the adsorption of the copolymers is significantly increased by the connection of PEO to an aliphatic polyester block. According to calorimetric experiments, the copolymers interact with the surface mainly through the hydrophilic block. At low surface coverage, the PEO block interacts with the surface such that both PEO and PCL chains are exposed to the aqueous solution. At high surface coverage, a dense copolymer layer is observed with the PEO blocks oriented toward the solution. The structure of the copolymer layer has been analyzed by neutron scattering using the contrast matching technique and by tapping mode atomic force microscopy. The experimental observations agree with the coadsorption of micelles and free copolymer chains at the interface.     

Adsorption of poly(ethylene oxide)-block-polylactide copolymers on polylactide as studied by ATR-FTIR spectroscopy

In this study, the adsorption of amphiphilic poly(ethylene oxide)-block-polylactide (mPEO-PLA) copolymers from a selective solvent onto a polylactide surface was studied as a method of polylactide surface modification and its effect on nonspecific protein adsorption was evaluated. A series of well defined mPEO-PLA copolymers was prepared to investigate the effect of copolymer composition on the resulting PEO chain density and on the surface resistance to protein adsorption. The copolymers contained PEO blocks with molecular weights ranging between 5600 and 23,800 and with 16-47 wt% of PLA. The adsorption of both the copolymers and bovine serum albumin was quantified by attenuated total reflection FTIR spectroscopy (ATR-FTIR). In addition to the adsorbed copolymer amount, its actual composition was determined. The PEO chain density on the surface was found to decrease with the molecular weight of the PEO block and to increase with the molecular weight of the PLA block. The adsorbed copolymers displayed the ability to reduce protein adsorption. The maximum reduction within the tested series (by 80%) was achieved with the copolymer containing PEO of MW 5600 and a PLA block of the same MW.     

Facile synthesis of core‐surface crosslinked nanoparticles by interblock RAFT polymerization

A new, efficient method for synthesizing stable nanoparticles with poly(ethylene oxide) (PEO) functionalities on the core surface, in which the micellization and crosslinking reactions occur in one pot, has been developed. First, amphiphilic PEO‐b‐PS copolymers were synthesized by reversible addition fragmentation chain transfer (RAFT) radical polymerization of styrene using (PEO)‐based trithiocarbonate as a macro‐RAFT agent. The low molecular weight PEO‐b‐PS copolymer was dissolved in isopropyl alcohol where the block copolymer self‐assembled as core‐shell micelles, and then the core‐shell interface crosslink was performed using divinylbenzene as a crosslinking agent and 2,2′‐azobisisobutyronitrile as an initiator. The design of the amphiphilic RAFT agent is critical for the successful preparation of core‐shell interface crosslinked micellar nanoparticles, because of RAFT functional groups interconnect PEO and polystyrene blocks. The PEO functionality of the nanoparticles surface was confirmed by ¹H NMR and FTIR. The size and morphology of the nanoparticles was confirmed by scanning electron microscopy, transmission electron microscopy, and dynamic laser light scattering analysis. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Adsorption behavior of PS‐PEO diblock copolymers on silver and alumina surfaces: A surface plasmon resonance study

In this work, the adsorption behavior at the silver/toluene and alumina/toluene interface of polystyrene–polyethylene oxide (PS‐PEO) diblock copolymers of various molecular weights was investigated by implementation of the surface plasmon resonance (SPR) technique. This was accomplished under a careful choice of experimental setup and the use of a suitable physical model for the interpretation of the experimental data. Comparison between polystyrene homopolymer and PS‐PEO diblock copolymer adsorption measurements indicate that PS‐PEO is anchored on the alumina surface via the PEO block, while on silver the copolymer is attached by various chain segments. The measured final adsorption amounts on alumina are typical of end‐attached polymeric brush formation while the dynamics of the adsorption process present two clearly different evolution regimes. This work provides insight into the many advantages of the use of the SPR technique as a valuable tool for similar surface studies. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1580–1591, 2006     

Micellization of non-surface-active diblock copolymers in water. Special characteristics of poly(styrene)-block-poly(styrenesulfonate)

Strongly ionized amphiphilic diblock copolymers of poly(styrene)-b-poly(styrenesulfonate) with various hydrophilic and hydrophobic chain lengths were synthesized by living radical polymerization, and their properties and self-assembling behavior were systematically investigated by surface tension measurement, foam formation, hydrophobic dye solubilization, X-ray reflectivity, dynamic light scattering, small-angle neutron scattering, small-angle X-ray scattering, and atomic force microscope techniques. These copolymer solutions in pure water did not show a decrease of surface tension with increasing polymer concentration. The solutions also did not show foam formation, and no adsorption at the air/water interface was confirmed by reflectivity experiments. However, in 0.5 M NaCl aq solutions polymer adsorption and foam formation were observed. The critical micelle concentration (cmc) was observed by the dye solubilization experiment in both the solutions with and without added salt, and by dynamic light scattering we confirmed the existence of polymer micelles in solution, even though there was no adsorption of polymer molecules at the water surface in the solution without salt. By the small-angle scattering technique, we confirmed that the micelles have a well-defined core-shell structure and their sizes were 100-150 A depending on the hydrophobic and hydrophilic chain length ratio. The micelle size and shape were unaffected by addition of up to 0.5 M salt. The absence of polymer adsorption at the water surface with micelle formation in a bulk solution, which is now known as a universal characteristic for strongly ionized amphiphilic block copolymers, was attributed to the image charge effect at the air/water interface due to the many charges on the hydrophilic segment.     

Polystyrene‐graft‐poly(ethylene oxide) copolymers prepared by macromonomer technique in dispersion. I. Liquid chromatographic separation of product mixtures

Products of the radical dispersion copolymerization of methacryloyl‐terminated poly(ethylene oxide) (PEO) macromonomer and styrene were separated and characterized by size exclusion chromatography (SEC), full adsorption‐desorption (FAD)/SEC coupling and eluent gradient liquid adsorption chromatography (LAC). In dimethylformamide, which is a good solvent for PEO side chains but a poor solvent for polystyrene (PS), amphiphilic PS‐graft‐PEO copolymers formed aggregates, which were very stable at room temperature even upon substantial dilution. The aggregates disappeared at high temperature or in tetrahydrofuran (THF), which is a good solvent for both homopolymers and for PS‐graft‐PEO. FAD/SEC procedure allowed separation of homo‐PS from graft‐copolymer and determination of both its amount and molar mass. Effective molar mass of graft‐copolymer was estimated directly from the SEC calibration curve determined with PS standards. Presence of larger amount of the homo‐PS in the final graft‐copolymer products was also confirmed with LAC measurements. The results indicate that there are at least two or maybe three polymerization loci; namely the continuous phase, the particle surface layer and the particle core. The graft copolymers are produced mainly in the continuous phase while PS or copolymer rich in styrene units is formed mostly in the core of monomer‐swollen particles. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2284–2291, 2000     

Biofouling resistance of ultrafiltration membranes controlled by surface self-assembled coating with PEGylated copolymers

Block and random PEGylated copolymers of poly(ethylene glycol) methacrylate (PEGMA) and polystyrene (PS) were synthesized with a controlled polydispersity using an atom transfer radical polymerization method and varying molar mass ratios of PS/PEGMA. Two types of PEGylated copolymers were self-assembly coated onto the surface of poly(vinylidene fluoride) (PVDF) ultrafiltration membranes for enhancing biofouling resistance. It was found that the adsorption capacities of random copolymers on PVDF membranes were all higher than those of block copolymers. However, the specific and overall protein resistance of bovine serum albumin (BSA) on PVDF membranes coated with block copolymers was much higher than that with random copolymers. The increase in styrene content in copolymer increased the amount of polymer coating on the membrane, and the increase in PEGMA content enhanced the protein resistance of membranes. The optimum PS/PEGMA ratio was found to be close to 2 for the best resistance of protein adsorption and bacterial adhesion on the PEGylated diblock copolymer-coated membranes. The PVDF membrane coated with such a copolymer owned excellent biofouling resistance to BSA, humic acid, negatively surface charged bacteria E. coli, and positively surface charged bacteria S. maltophilia.     

Micellar Behavior of Polystyrene-Poly(Ethylene Oxide) Diblock Copolymers in Aqueous Media: Effect of Copolymer Composition,Temperature, Salt,and Surfactants

Formation and structure of micelles from two amphiphilic polystyrene-block-poly(ethylene oxide) (PS-PEO) diblock copolymers (PS mol.wt. 1000; PEO mol.wt. 3000 and 5000) were examined by surface tension, viscosity, steady state fluorescence, dynamic light scattering (DLS), small angle neutron scattering (SANS), and cryo-transmission electron microscopy (cryo-TEM). The critical micelle concentration (CMC) of the copolymers in aqueous solution was ca. 0.05%; micelle hydrodynamic diameter was 30–35 nm with a narrow size distribution. SANS studies show that the copolymers form ellipsoidal micelles with semi major axis ～23 nm and semi minor axis ～8 nm. No significant change in the structure was found with temperature and presence of salt. The copolymer micelles interaction with the ionic surfactants sodium dodecyl sulphate (SDS) and dodecyltrimethylammonium bromide (DTAB) was also examined by DLS and SANS.     

A physico-chemical investigation of poly(ethylene oxide)-block-poly(L-lysine) copolymer adsorption onto silica nanoparticles

The adsorption behavior of poly(ethylene oxide)-b-poly(L-lysine) (PEO(113)-b-PLL(10)) copolymer onto silica nanoparticles was investigated in phosphate buffer at pH 7.4 by means of dynamic light scattering, zeta potential, adsorption isotherms and microcalorimetry measurements. Both blocks have an affinity for the silica surface through hydrogen bonding (PEO and PLL) or electrostatic interactions (PLL). Competitive adsorption experiments from a mixture of PEO and PLL homopolymers evidenced greater interactions of PLL with silica while displacement experiments even revealed that free PLL chains could desorb PEO chains from the particle surface. This allowed us to better understand the adsorption mechanism of PEO-b-PLL copolymer at the silica surface. At low surface coverage, both blocks adsorbed in flat conformation leading to the flocculation of the particles as neither steric nor electrostatic forces could take place at the silica surface. The addition of a large excess of copolymer favoured the dispersion of flocs according to a presumed mechanism where PLL blocks of incoming copolymer chains preferentially adsorbed to the surface by displacing already adsorbed PEO blocks. The gradual addition of silica particles to an excess of PEO-b-PLL copolymer solution was the preferred method for particle coating as it favoured equilibrium conditions where the copolymer formed an anchor-buoy (PLL-PEO) structure with stabilizing properties at the silica-water interface.     

PLA-b-PEO-b-PLA三嵌段共聚物分子聚集体性质的研究

采用开环聚合的方法 ,合成了组成不同的PLA b PEO b PLA三嵌段共聚物 .滴加选择性溶剂水于共聚物的良溶剂溶液中 ,制备了共聚物以水为介质的“平头”聚集体胶束溶液 .把聚集体胶束溶液浇铸在云母片上 ,采用扫描探针显微镜 (SPM)表征了其形貌和表面微粘弹性 .发现脱离了极性介质水的聚集体的表面性质发生了不均一化 ,聚集体的顶部比相连接的部分具有较高的储能模量 .聚集体环境的改变使聚集体中不同嵌段的迁移导致了这种表面粘弹性的不均一 .另外 ,采用动态光散射的方法测量了体系溶液中聚集体胶束的尺寸 .实验发现光散射所得到的聚集体的尺寸远远大于SPM所得到尺寸 .增加聚合物的起始浓度使聚集体胶束的尺寸以及多分散性都在不同程度上增大 .然而聚合物的不同 ,这种增加的程度会有比较大的差别