Template Synthesis of Polyaniline in the Presence of Poly-(2-acrylamido-2-methyl-1-propanesulfonic Acid)

A template oxidative polymerization of aniline in aqueous solutions containing poly-(2-acrylamido-2-methyl-1-propanesulfonic acid) and ammonium persulfate yields a polyaniline complex with the polyacid soluble in water. According to the data of spectral measurements, the process of polymerization is of a pronounced autocatalytic nature. The consequences of this are both the formation of a nonuniform distribution of oxidized and nonoxidized fragments of the polymer chain and the formation of a macroscopic scale of redox nonuniformities in the reaction volume during the process of polymerization. The spectra of absorption of the polyaniline/polyacid films on transparent glass electrodes with a conductive layer of SnO₂ and the data of potentiodynamic measurements in the potential region 0–1.0 V (Ag/AgCl) are typical for polyaniline with moderate electroconduction.     

Chemical polymerization of aniline in the presence of mixtures of polymeric sulfonic acids

The template polymerization of aniline in the presence of polymeric sulfonic acids of various structures and their mixtures is studied. In the latter case, the dominant effect of a polyacid on the kinetics of aniline polymerization and the electronic structure of the resulting polyaniline complex is observed. As shown by viscometry measurements and IR studies, the intermolecular interaction between polyacids in their mixtures that leads to a change in the conformation of a flexible-chain polyacid is responsible for the dominant effect of a rigid-chain polyacid. The spectral and electrical properties of polyaniline-based interpolymer complexes are examined.     

The spectroelectrochemical behavior of films of polyaniline interpolymer complexes in the near infrared spectral region

In this work, we carry out spectroelectrochemical studies of films of interpolymer complexes of polyaniline (PANI) prepared via the chemical and electrochemical template polymerization of aniline in the presence of polyamide sulfonic acids with different structures. It is shown that their spectroelectrochemical behavior in the near infrared region depends on the rigidity of the chain of the polymer sulfonic acid matrix. Electrodeposited films of PANI complexes with a rigid-chain polyacid exhibit a more intense absorption in the near infrared region (1000–2200 nm) and a less intense absorption in the absorption region of localized polarons (around 750 nm) in comparison with complexes with a flexible-chain polyacid. The comparison of the dependence of absorption in the near infrared region on potential with the cyclic voltammetry curves suggests that the chromophores responsible for this absorption are radical cations in nature. In the spectra of the films of chemically synthesized PANI complexes with a flexible-chain polyacid, during a long-term cycling in the region of potentials of the first redox stage of PANI, the absorption in the near infrared region which corresponds to delocalized polarons is also formed. This is apparently attributed to the intensification of the intermolecular interactions under the conformational fluctuations that accompany the change in the degree of oxidation of the film during cyclic voltammetry.     

Synthesis of conducting polyaniline—polyanion interpolymer complexes and study of their composition and properties

The polymerization of aniline in the presence of poly(4-styrenesulfonic acid) and poly(2-acryla-mido-2-methyl-1-propanesulfonic acid) results in interpolyelectrolyte complexes with a composition and a dispersion stability depending on the aniline-to-polyanion ratio in the initial reaction mixture. As opposed to polymerization mediated by poly(4-styrenesulfonic acid), the template polymerization of aniline conducted in the presence of poly(2-acrylamido-2-methyl-1-propanesulfonic acid) leads to the structural template effect that manifests itself as the formation of polyaniline containing 1,2- and 1,4-substituted benzene rings. It is found that the electron conductivity of the polyaniline-polyanion interpolyelectrolyte complexes depends not only on the content but also on the nature of the used polyacid and proves to be higher in the case of stoichiometric interpolyelectrolyte complexes formed in the presence of poly(4-styrenesulfonic acid).     

Effect of methanol on morphology of polyaniline

Constant potential method is used to synthesize polyaniline (PANI) nanofibers in a solution containing methanol. According to shaping theory, the reasons about forming polyaniline nanofibers were suggested. The effects of the synthesis parameters, such as monomer concentration, methanol concentration, HCl concentration, electrode potential, polymerization time, and reaction temperature on the morphology of the PANI films have been investigated. Scanning electron microscopy results was used to characterize the morphology of PANI nanofibers. Both UV-vis absorption spectra and FTIR spectra indicate that there exists interaction between methanol molecules and polyaniline chains.     

On the origin of colloidal particles in the dispersion polymerization of aniline

When aniline is oxidized in an aqueous medium in the presence of a steric stabilizer, colloidal polyaniline (PANI) dispersions are obtained. The generally accepted model of the stabilization assumes that the macromolecules of the water-soluble steric stabilizer are adsorbed at the polymer, precipitating during the dispersion polymerization, and provide steric protection against further aggregation. An alternative mechanism of conducting-polymer particle formation is proposed in the present study. We suggest that the steric stabilizer provides a site for adsorption of oligoaniline initiation centers; subsequent polymerization from anchored centers yields particle nuclei that grow to produce colloidal PANI particles. This hypothesis is based on the observation that the colloidal particles are obtained only in the case where the steric stabilizer is introduced in the early stages of polymerization when aniline oligomers are present in the reaction mixture. If the stabilizer had been added during the growth of PANI chains, colloidal dispersions would not have been produced. The process of particle growth is completely analogous to the formation of conducting PANI films on the surface of microparticles and various materials. There, the polymerization of aniline at the surfaces is preferred to the same process proceeding in the bulk of the reaction mixture. While the films grow at the interfaces with the reaction mixture, the dispersion particles similarly emanate from the stabilizer chains. The particle size, the formation of nonspherical morphologies, the importance of the chemical nature of the stabilizer chains, and the general relation between the conducting-polymer film and particle growth are discussed in the light of the proposed model.     

Effect of matrix domination in PANI interpolymer complexes with polyamidosulfonic acids

Various polyaniline (PANI) interpolymer complexes with polyacids in the form of molecular solutions were synthesized by chemical oxidative polymerization of aniline in the presence of water-soluble poly-(2-acrylamido-2-methyl-1-propanesulfonic acid) (flexible backbone), poly-p,p′-(2,2′-disulfoacid)-diphenylene-terephthalamide (t-PASA, rigid backbone), and their mixtures in different ratios. The complexes were characterized by UV-Vis-near infrared spectroscopy in solutions; also, the films’ drop-casts from these solutions were investigated by cyclic voltammetry, spectroelectrochemical, direct current (DC) conductivity, and atomic force microscopy (AFM) measurements. It was shown that the nature of polyacid affects the shape of spectra and the dynamics of their changes. The character of spectral changes during the matrix synthesis of PANI in the presence of mixtures of the rigid-chain and flexible-chain matrixes and the study of spectral properties of the obtained PANI solutions demonstrates the existence of the rigid-matrix domination effect in the process of formation of PANI interpolymer complexes. Spectral properties of the obtained PANI complexes with the mixtures of flexible-chain and rigid-chain polyacids of different ratios (3:1, 1:1, 1:3, and 1:6) are very similar to those ones for the complex with rigid-chain t-PASA. At the same time, there is a correlation between the electrical conductivity and morphology of the films of PANI complexes and their composition, the conductivity passing through a minimum for the complexes with the polyacid mixtures (6:1, 3:1, and 1:1).     

DSC study of polyhydroxyethylmethacrylate filled with modified silicas

Effects of the nature of functional groups (namely, hydroxyl, methyl, silicon hydride, amino, and vinyl) on the surface of pristine and modified silicas on polymerization of 2-hydroxyethylmethacrylate (HEMA) and on structural characteristics of the filled composites have been studied. DSC, FTIR spectroscopy and equilibrium water sorption (ESI) techniques were applied for the composites characterization. Results obtained testify that the chemical nature of the grafted groups has a strong influence on the monomer orientation in the surface layer of the filler. More uniform and cross-linked structures were detected in the composites with particularly methylated silica. Filler with chemically active silicon hydride groups promotes formation of ordered structure with rigid macromolecules. The presence of amino and vinyl groups on the silica surface results in formation of flexible polymer chains with a low cross-linking density or with a low polymerization degree, even at 2?wt% filling degree. Water uptake for composites with vinyl- and amine-containing silicas was low, indicating the close-packing of polymeric molecules in the filled polyHEMA.     

Template polymerization of aniline in presence of poly(acrylamide-<Emphasis Type="Italic">co</Emphasis>-maleic acid) for preparation of conductive polymers

In the present work new conductive nanostructures based on poly (acrylamide-co-maleic acid) (PAAMA) and polyaniline were prepared. The template polymerization of aniline was conducted in the aqueous solution of PAAMA with different ratios (w/w%) of aniline to polyacid. The prepared composite was characterized by FTIR and UV–Vis spectroscopy, SEM, electrical conductivity measurements and solubility tests.     

Enhancement of polyaniline’s electrical conductivity by coagulation polymerization

An effective and simple method was developed to prepare highly conductive polyaniline by coagulation polymerization. Depending on the coagulation reaction between aniline salts and lauryl sulfonate (SDS), not only was the polymerization rate of aniline monomers greatly decreased but also the doping efficiency of hydrochloric acid was effectively increased. Low polymerization rate provided enough time for the conformation adjustment of polyaniline chains and the diffusion of doping agent. Meanwhile, the doping efficiency of hydrochloric acid on polyaniline chains was effectively increased due to its easy diffusion among many vacancies, which were generated when SDS separated in the process of polymerization. Therefore, the electrical conductivity of polyaniline prepared by coagulation polymerization was increased more than ten times than that of polyaniline, which was prepared by conventional methods. In addition, the important factors to influence the preparation, such as SDS concentration, hydrochloride acid (HCl) concentration, content of ammonium persulfate (APS), and polymerization time were also investigated. When the molar ratio (aniline:SDS:HCl :APS) was set to 1.69:0.46:15.38:1, the conductivity of polyaniline reached 24.39 S/cm.     

Potentiometric monitoring DNA hybridization with polyaniline/Nylon-6 working electrode

Electrically conducting polymers are useful in various applications such as transistors and sensors. A potentiometric pH meter has been developed using polyaniline based working electrode and with improved selectivity using ionophores, the polyaniline based potentiometer has been applied to monitor various ions mainly in environmental applications. The polyaniline working electrode can be used to monitor not only the binding of a biological ionic macromolecules on polyaniline surface but also the binding of the adsorbed macromolecule with another macromolecule. We present first how the working electrode was prepared by polymerization of aniline in Nylon-6 matrix to provide the mechanical strength and then how single strand oligonucleotide probe binds with polyaniline surface. We then present how an electrode modification with mercaptoethanol results in a surface protected against non-specific binding and then finally we present the results of monitoring the complimentary strand binding leading to the formation of the double strand DNA. The text was submitted by the authors in English.     

Helical conformational specificity of enzymatically synthesized water-soluble conducting polyaniline nanocomposites

A novel template guided enzymatic approach has been developed to synthesize optically active conducting polyaniline (PANI) nanocomposites in the presence of H2O2 as an oxidant, using (+) and (-) 10-camphorsulfonic acid (CSA) as a dopant and chiral inductor. The formation of chiral polyaniline in the nanocomposites was confirmed by circular dichroism (CD). Interestingly, the CD spectra of nanocomposites formed either with (+) or with (-) CSA show the enzyme itself plays a critical role in controlling the stereospecificity of the polyaniline (PANI) in the nanocomposite. The enzyme used for the polymerization of aniline in the nanocomposite was horseradish peroxidase (HRP). It was shown that this enzyme prefers a specific helical conformation, regardless of whether induced chirality in the complex CSA-aniline is from (+) or (-) CSA. UV-vis spectra show that the polyaniline is in the conducting form, and transmission electron micrographs (TEM) show that the nanocomposites are dispersed nicely with particle size dimensions in the range of 20-50 nm. Electron diffraction patterns of these chiral polymer nanocomposites suggest that these nanocomposites are in both crystalline and amorphous states.     

聚苯胺-LiNi铁氧体复合纳米微粒的原位合成及其键合机制

通过原位溶液聚合法制备了聚苯胺-LiNi铁氧体(LiNi_0.5Fe₂O₄)复合纳米微粒, 用X射线衍射(XRD)、红外光谱(FTIR)、拉曼光谱(Raman)、紫外-可见光谱(UV-Vis)、透射电子显微镜(TEM)以及振动样品磁强计(VSM)等技术表征了复合物的结构、形貌和磁性能. 结果表明, 复合物在室温外加磁场下表现出亚铁磁性物质具有的磁滞现象, 铁氧体颗粒对苯胺的聚合起到了核的作用; 复合物中铁氧体与聚苯胺之间存在着比较明显的键合作用, 探讨了铁氧体与聚合物分子链之间的键合机制.     

Studies on the Self-condensing Vinyl Living Radical Polymerization of a Novel Acrylate Inimer

IntroductionDendrimers represent a class of macro-molecules with perfectly and regularly branchedstructures.However,the synthesis ofdendrimers isnot trivial and requires multistep synthesis,theircommercial development has been limited only to afew structures[1— 3 ] . Hyperbranched macro-molecules,which posses less perfectly branchedstructures,have some similar properties to those ofdendrimers,but they can be prepared in a singlestep and one- pot reaction,so many macromolecularresearchershavef…     

Phenol assisted deaggregation of polyaniline chains: simple route to high quality polyaniline film

High conducting polyaniline films were readily prepared by in situ chemical oxidative polymerization/deposition of aniline in the presence of a very small amount of organic additive such as phenol. The conductivity of a thin ( approximately 150 nm) polyaniline film synthesized in the presence of 0.01 wt % of phenol ( r-PANI) is an order of magnitude higher (as well as better conducting homogeneity) than that of a film (PANI) obtained from the conventional method without an additive. r-PANI also has better adhesion and electrochemical stability/reversibility, more transparency in the visible-light region, and faster/easier doping/dedoping response compared to PANI. The function of phenol molecule is to avoid the formation of the inter- and/or intrachain hydrogen bonding during the growth of the polyaniline chains. The deaggregation/reducing intrachain hydrogen bonding of polyaniline chains by phenol molecules was revealed with IR, SAXS, and SEM data. All these data supported that phenol does assist the deaggregation of polyaniline chains during the growth of polymer chains or nanorods.     

Role of photoadduct of K4Fe(CN)6 and C3H4N2 in improving thermal stability of polyaniline composite

This paper involves the synthesis of polyaniline composite with photoadduct of potassium hexacyanoferrate and imidazole via photochemical route by oxidative polymerization technique by ammonium persulphate. The photoadduct has been synthesized by photoirradiation followed by substitution with imidazole ligand. The photoaquation, substitution and successful synthesis has been proved by recording pH, UV visible spectra before and after irradiation and XRD of photoadduct. The as synthesized composite has been subjected to various characterizations like elemental analysis, UV–Visible spectra, FTIR, XRD, SEM, and TG/DTG. XRD of photoadduct shows crystalline structure which has been retained in the composite, changing the amorphous structure of polyaniline into the crystalline one, hence proving the insertion of photoadduct in the polymer chain. Various parameters like crystallite size (L), interplanar distance (d), micro strain (ε), dislocation density (δ) and distortion parameters (g) were calculated from XRD data. Thermal analysis shows the high thermal stability of composite which can be due to strong interaction between polymer chain and the photoadduct which restricts the thermal motion of polyaniline and thus enhances the thermal stability of composite.     

Amphiphilic comb macromolecules with different distribution statistics of side-chain grafting sites: Mathematical modeling

The influence of the distribution statistics of side-chain grafting sites on the conformational properties of amphiphilic comblike macromolecules immersed in a solvent that is poor for the main chain and good for the side chains was studied. It was shown that the coil-globule transition for macromolecules with the protein-like distribution of side-chain grafting sites occurs at higher temperatures, wherein the size of the proteinlike macromolecules is generally smaller than that of the corresponding regular macromolecules. Regardless of distribution statistics of side-chain grafting sites, the coil-globule transition of comb macromolecules passes through the step of the formation of the beads-on-a-string conformation composed of micelle-like beads. The temperature dependence curves of the heat capacity exhibit at least two maximums associated with the coil-globule transition per se and the coalescence of the beads into a single globule. The coil-globule transition temperature is slightly dependent upon the degree of polymerization of the main chain and drops with a decrease in the degree of polymerization of the side chains. It was found that comb macromolecules can form spherical, disklike, or cylindrical globules, depending on the structural parameters.     

A new mechanism of the dioxygen effect on ESR spectra of polyaniline

The effect of dioxygen on the ESR spectra of powders of emeraldine salts at 170–230 K was found to depend on the time of storing of the samples at a specific temperature. The kinetics of changes in the ESR spectra reflects the conformational mobility of the polyaniline chains and its supramolecular structure. A new mechanism of the dioxygen effect on the ESR spectra of polyaniline at 50–100 K associated with the condensation of dioxygen in polyaniline pores was proposed.     

Specific features characterizing electrochemical synthesis of polyaniline conducted in the presence of poly(2-acrylamido-2-methyl-1-propanesulfonic acid) and the spectroelectrochemical characteristics of the obtained films

The electrochemical matrix polymerization of aniline in the presence of poly(2-acrylamido-2-methyl-1-propanesulfonic acid) (PAMPSA) is performed in conditions that lead to the formation of an interpolymer complex comprising polyaniline and PAMPSA of the 1: 2 composition. The acceleration of the process of polymerization of aniline in the presence of PAMPSA as compared with traditional electropolymerization of aniline in hydrochloric acid is caused by the association of aniline molecules with the sulfo groups of PAMPSA and by a high concentration of hydrogen ions in the vicinity of a molecule of PAMPSA. It is established for the first time ever that, in the initial stages of synthesis for both polymeric and low-molecular-weight acids, the rate of polymerization is substantially greater at a smaller concentration of the acid. The distinguishing feature of the initial stage of electropolymerization of aniline at a low acidity of the environment is a non-autocatalytic character of the process, which may exert a discernible influence on a complex of physicochemical properties of polyaniline, including electric conduction. Studying spectroelectrochemical properties of the obtained films shows practical identity of their spectra with the spectra of standard polyaniline.     

Structure of Hydrogen and Hydrophobically Bonded Amphiphilic Copolymer with Poly(methacrylic acid) Complexes as Revealed by Small Angle Neutron Scattering

We study by SANS the structure of intermolecular complexes formed through hydrogen bonding and hydrophobic interactions between poly(methacrylic acid) (PMA) and a neutral copolymer surfactant (PEO-PPO-PEO). The contrast variation method enables us to probe the structure factor of each polymer in the complex and their cross structure factor. The number of copolymer chains, which results from the cooperative action of hydrogen bonding and hydrophobic interactions increases as the charge of the polyacid decreases. The aggregation preserves the micellar core-corona organization of the copolymer and shrinks the polyacid chains which adopt a similar compact structure. Finally, the structure of the aggregates is compared to that of PEO-PMA homopolymer complex observed by SANS.