α-氨基烃基膦酸及其衍生物的合成与反应

本文报导合成α-氨基烃基膦酸(1)及其衍生物的新方法与反应。(一)提出用苯甲酰胺(或丙烯酰胺)和醛、亚磷酸三苯酯反应,经水解合成(1);(二)在BF_3·Et_2O催化下用磷酰胺或代磷酰胺、醛和亚磷酸三苯酯或苯基亚磷酸二苯酯反应,生成α-磷胺酰氨基(或硫代磷酰胺基)取代苄膦酸二苯酯或次膦酸苯酯(2)。经选择性脱去氨基保护基生成α-氨基膦酸二苯酯溴代盐(3);(三)二苯氧基氯磷、醛和磷酰胺(或硫代磷酰胺)在 ZnCl_2等路易斯酸存在     

原位生成的烯丙基磷叶立德与醛的化学反应性研究

介绍了我们小组最近有关原位生成的烯丙基磷叶立德与醛的化学反应性研究结果.在化学计量叔膦作用下,烯丙基碳酸酯或联烯酸酯经原位生成的烯丙基磷叶立德活性中间体,与醛发生高度立体选择性的三组分Wittig烯化反应和vinylogous Wittig烯化反应,该类反应为合成多取代1,3-二烯衍生物提供了简单、高效的新方法;在催化量叔膦作用下,γ-甲基联烯酸酯经烯丙基磷叶立德关键中间体与醛发生多个膦催化的环化反应,为五元、六元含氧杂环化合物的合成提供了原子经济性的方法.通过氘代实验和核磁跟踪等方法,对上述反应机理进行了初步探索.     

缩醛/缩酮的合成研究进展

醛/酮与醇或原甲酸酯进行亲核加成反应生成的产物缩醛/缩酮,是一类重要的有机化合物。在有机合成中,该反应也广泛用于醛/酮羰基的保护或者乙二醇的保护,因此,缩醛/缩酮的合成研究引起广泛的关注。本文根据反应体系的不同,从酸催化、电催化和光催化三个方面对近年来缩醛/缩酮的合成研究进展进行详细综述。期望该综述作为学生基础有机化学课程的课后拓展阅读内容,能加深学生对基础反应的理解,培养学生的科研创新思维。     

微波照射下膦酰基/硫甲基烯酮硫代缩醛和N-取代膦酰 基/硫甲基硫代碳酸酯的 合成

在微波照射下方便、高收率地合成了新奇的膦酰基杂环的合成子-膦酰基/硫甲基烯酮硫代缩醛和N-取代膦酰基/硫甲基硫代碳酸酯,实验表明微波照射大大加快了反应速率和提高了反应产率。     

叔膦参与下联烯酸酯与醛的反应

联烯酸酯是近年来研究较多的一类重要的缺电子联烯,具有丰富的化学反应.本文着重总结了近年来在叔膦参与下(催化或化学计量方式)联烯酸酯与醛的新反应,包括2,3-丁二烯酸酯与醛的成环反应、γ-取代联烯酸酯与醛的[3+2]环加成反应和烯化反应、α-取代联烯酸酯与醛的Vinylogous Wittig反应以及环丙烷化反应,并从反应机理的角度,探讨了联烯酸酯与亲电试剂活化烯、亚胺和醛在反应性上的差异.在这些重要的化学转化中,叔膦的特殊性质如亲核性与夺氧能力起了关键的作用.     

双膦配体修饰铑催化乙酸乙烯酯氢甲酰化反应(英文)

研究了双膦配体对铑催化的乙酸乙烯酯氢甲酰化反应的促进作用,结果表明,在优化反应条件下,以双膦化合物2,2’-二(二苯膦甲基)-1,1’-联苯(BISBI)为配体时,铑催化乙酸乙烯酯氢甲酰化反应的TOF(转化频率)值达到4000h1,生成2-乙酰氧基丙醛的选择性99%.当在较温和的条件下Rh/BISBI催化乙酸乙烯酯氢甲酰化反应较长时间时TON(转化数)值达到9200,成醛率超过90%,2-乙酰氧基丙醛选择性仍保持99%.     

铑/双膦配体催化均相内烯烃氢甲酰化反应的研究进展

烯烃氢甲酰化反应是工业上合成醛的重要方法.由于双膦配体良好的配位能力,形成的铑配合物有很好的催化活性,在内烯烃氢甲酰化反应中,可以有效地提高直链醛选择性.本文系统地综述了近年来双膦配体铑配合物催化均相内烯烃氢甲酰化反应的研究进展,讨论了双膦配体结构对催化剂活性和生成直链醛选择性的影响.     

有机磷化合物的研究(LVII)——二苯(氧)基氯膦对肟基的自由基加成——合成1-氨基取代三烷基氧化膦及烷基膦酸酯的新途径

二苯基氯膦或二苯氧基氯膦对醛(酮)肟的反应可作为合成1-氨基烷基二苯基氧化膦或1-氨基烷基膦酸二苯酯的新方法,具有条件温和、操作方便及得率高的优点。EPR研究结果揭示了这类反应属自由基机理。     

亲核叔膦促进的联烯酸酯环加成反应研究进展

20世纪90年代中期,陆熙炎教授报道了亲核叔膦促进的联烯酸酯与缺电子烯烃和亚胺环加成反应.二十年来,作为高效构建功能化碳环及杂环化合物方法,叔膦促进的联烯酸酯环加成反应的发展和应用受到化学家的广泛关注.多样性的亲核叔膦和不同结构联烯酸酯的引入,可呈现多种类型的环加成反应.特别是手性叔膦的应用,高选择性地实现了对该类反应的不对称催化,为一些天然产物和药物模块的全合成开辟了新途径.此外,醛酮化合物也被运用到此类反应中,构建了多种有用的含氧杂环.本篇综述包括六部分:第一部分是引言,概括介绍陆氏反应;第二至五部分分别阐述了亲核叔膦促进联烯酸酯与缺电子烯烃、亚胺、醛酮以及特定亲核试剂的各种环加成反应;最后一部分是总结与展望.     

高分子催化剂聚氯乙烯—三氯化铁催化合成缩醛（酮）

本文首次将高分子催化剂聚氯乙烯—三氯化铁应用于缩醛和缩酮的合成中,乙二醇或1,2—丙二醇与醛或酮的羰基作用生成缩醛或缩酮。当0.2mol醛或酮与0.3mol醇的混合物在0.5g催化剂作用下,用环已烷为溶剂,回流反应50分钟,其收率为78—91％。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.