The acetylsalicylic acid–bromine system for multicomponent kinetic determinations

When acetylsalicylic acid (ASA) is added to a bromine solution, slow decay of the bromine concentration occurs. Hydrolysis of ASA yields salicylic acid (SA) slowly, and bromine reacts rapidly with SA but not with ASA. Simulated reaction profiles based on a two-step reaction scheme agree closely with the experimental profiles. This behaviour can be used to develop kinetic methods for resolution of mixtures of ASA and a second component that reacts rapidly with bromine. A remarkable practical feature of these methods is that the faster the reaction between bromine and the second component, the simpler and easier the analytical method. The reaction between hydroquinone (HQ) and bromine is rapid and a very simple analytical method is proposed. Mean validation errors of 2.8% for HQ and 7.2% for ASA have been found with concentration ratios [ASA]:[HQ] ranging between 0.32 and 19.4. The reaction between paracetamol (AAP) and bromine is not so fast and more complicated calibration methods are required. After use of a calibration plane mean validation errors of 2.7% for AAP and 8.1% for ASA have been found with concentration ratios ranging between 1.28 and 77.5. Similar kinetic approaches should be possible with many other mixtures of ASA and a second fast-reacting component, because bromine reacts with many inorganic and organic species by oxidation-reduction, substitution, and addition reactions.     

Multicomponent determinations by partial least-squares regression analysis of fast-reaction multiwavelength profiles obtained by continuous addition of a reagent

Partial least-squares regression (PLS) analysis of multiwavelength reaction profiles, obtained by continuous addition of a reagent to a binary mixture of analytes, giving fast reactions, is presented. The methodology has proved to be useful for the simultaneous determination of the mixture components. Octacyanomolibdate(V) (Mo(V)) has been used as a reagent for mixtures of hydroquinone (HQ) and pyrogallol (PG) in acidic medium. When the reaction profiles are followed spectrophotometrically at several wavelengths, and they are handled with PLS, the mixture can be resolved. The final spectrum of the mixture, after reaction with Mo(V), is enough to predict the HQ concentration, but in the case of PG successive spectra along the reaction are necessary to predict properly the concentration. The concentrations for HQ in the calibration set ranged between 1.8x10(-6) and 1.7x10(-5) M and for PG between 2.5x10(-6) and 2.5x10(-5) M. The concentration ratio, [HQ]:[PG], in the validation set ranged between 0.17 and 4.10. Mean validation errors of 1.6% for HQ and 4.2% for PG were found. Satisfactory results were obtained when independent studies of accuracy and precision were accomplished. The effect of p-phenylenediamine and aminophenols was studied as interferences and, in general, hydroquinone is more affected than pyrogallol. The tolerated concentration of interferences ranged between 10(-6) and 10(-4) M.     

Molecularly imprinted polymers microsphere prepared by precipitation polymerization for hydroquinone recognition

A one-step precipitation polymerization synthesis was adopted for the preparation of molecularly imprinted polymers (MIPs) by using hydroquinone as a template molecule. The transmission electron microscopy (TEM) exhibited that the polymers were uniform spheres with the diameter of about 700 nm. The results of adsorption experiments showed that the microspherical imprinted polymers possessed fast adsorption dynamics. Compared to the structurally similar compounds, catechol and resorcinol, the MIPs exhibited a high recognizable capacity to hydroquinone. And the electrochemical sensor fabricated by modifying the prepared MIPs microsphere on the glassy carbon electrode surface was used to detect the hydroquinone concentration. The current response was proportional to the concentration of hydroquinone in the range of 2.0 x 10(-6) to 1.0 x 10(-4)mol/L with the detection limit of 1.0 x 10(-6)mol/L.     

Optical photothermal detection in HPLC

A mode-mismatched parallel dual-beam thermal lens spectrometer with a far-field single-channel detector system was used as a detector in HPLC. An expert estimation of the measurement results was applied to optimize the optical-scheme configuration of the spectrometer to achieve the longest linear calibration range and highest repeatability under chromatographic flow conditions. Chelates with 4-(2-pyridylazo)resorcinol were separated and determined with the limits of detection of n x 10(-8)- n x 10(-7) mol L(-1); the relative standard deviation of measurements was 46%. Xylenol Orange, 4-(2-thiazolylazo)resorcinol, and dithizone were studied as post-column reagents in thermal lens detection in ion chromatography. The limits of detection were n x 10(-8)- n x 10(-7) mol L(-1); the linear calibration ranges were about three orders; the relative standard deviation of measurements was 3-7%. A combined photothermal-refractometric detector for HPLC based on a polarization interferometer is proposed. Metal complexes as 4-(pyridylazo)resorcinol chelates (limits of detection of n x 10(-8)- n x 10(-7) mol L(-1)) and sugars (limits of detection of 10-20 ng L(-1)) were investigated as model substances. Obtained results were compared with results for traditional detectors, which show that photothermal detection has higher sensitivity than photometric and other absorption detectors.     

High-temperature measurements of the reactions of OH with toluene and acetone

The reaction of hydroxyl [OH] radicals with toluene [C6H5CH3] was studied at temperatures between 911 and 1389 K behind reflected shock waves at pressures of approximately 2.25 atm. OH radicals were generated by rapid thermal decomposition of shock-heated tert-butyl hydroperoxide [(CH3)3-CO-OH], and monitored by narrow-line width ring dye laser absorption of the well-characterized R1(5) line of the OH A-X (0,0) band near 306.7 nm. OH time histories were modeled by using a comprehensive toluene oxidation mechanism. Rate constants for the reaction of C6H5CH3 with OH were extracted by matching modeled and measured OH concentration time histories in the reflected shock region. Detailed error analyses yielded an uncertainty estimate of +/-30% at 1115 K for the rate coefficient of this reaction. The current high-temperature data were fit with the lower temperature measurements of Tully et al. [J. Phys. Chem. 1981, 85, 2262-2269] to the following two-parameter form, applicable over 570-1389 K: k3 = (1.62 x 10(13)) exp(-1394/T [K]) [cm3 mol(-1) s(-1)]. The reaction between OH radicals and acetone [CH3COCH3] was one of the secondary reactions encountered in the toluene + OH experiments. Direct high-temperature measurements of this reaction were carried out at temperatures ranging from 982 to 1300 K in reflected shock wave experiments at an average total pressure of 1.65 atm. Uncertainty limits were estimated to be +/-25% at 1159 K. A two-parameter fit of the current data yields the following rate expression: k6 = (2.95 x 10(13)) exp(-2297/T [K]) [cm3 mol(-1) s(-1)].     

Kinetics and mechanism of bromate-bromide reaction catalyzed by acetate

The initial rate of the bromate-bromide reaction, BrO3- + 5Br- + 6H+ --> 3Br2 + 3H2O, has been measured at constant ionic strength, I = 3.0 mol L(-1), and at several initial concentrations of acetate, bromate, bromide, and perchloric acid. The reaction was followed at the Br2/Br3- isosbestic point (lambda = 446 nm) by the stopped-flow technique. A very complex behavior was found such that the results could be fitted only by a six term rate law, nu = k1[BrO3-][Br-][H+]2 + k2[BrO3-][Br-]2[H+]2 + k3[BrO3-][H+]2[acetate]2 + k4[BrO3-][Br-]2[H+]2[acetate] + k5[BrO3-][Br-][H+]3[acetate]2 + k6[BrO3-][Br-][H+]2[acetate], where k1 = 4.12 L3 mol(-3) s(-1), k2 = 0.810 L4 mol(-4) s(-1), k3 = 2.80 x 10(3) L4 mol(-4) s(-1), k4 = 278 L5 mol(-5) s(-1), k5 = 5.45 x 10(7) L6 mol(-6) s(-1), and k6 = 850 L4 mol(-4) s(-1). A mechanism, based on elementary steps, is proposed to explain each term of the rate law. This mechanism considers that when acetate binds to bromate it facilitates its second protonation.     

流动注射化学发光法测定水样中痕量间苯二酚

基于在甲醛存在条件下,高锰酸钾在酸性介质中氧化间苯二酚而发生化学发光反应,建立了测定痕量的间苯二酚化学发光分析法.该法测定间苯二酚的线性范围为5.0×10-9～1.0×10-4mol/L,检出限为3.0×10-9mol/L,相对标准偏差为3.5%(1.0×10-6mol/L间苯二酚,n=11).该法应用于测定水样中加入的间苯二酚,结果令人满意.     

Kinetic spectrophotometric determination of Ga(III)-Al(III) mixtures by stopped-flow injection analysis using principal component regression

A multivariate calibration method based on principal component regression analysis is applied to the resolution of mixtures by kinetic methodology. Gallium(III) and Al(III) were determined in mixtures on the basis of their different rate of reaction with 4-(2-pyridylazo)resorcinol in a slightly basic medium by using a stopped-flow injection procedure. Mixtures containing 1-5 mg/l. Ga(III) and 20-100 mg/l. Al(III) were successfully resolved with errors less than 10%.     

Hydrogen-bonded extended structure of the 1:3 adduct of a C3 symmetric cobalt(III) complex with a tripod-ligand involving three imidazolate groups and hydroquinone or resorcinol

The assembly reaction arising from hydrogen bonding between a chiral C3 symmetric cobalt(III) complex and a tripod-ligand involving three imidazolate groups [tris[2-(((2-methylimidazolato-4-yl)methylidene)amino)ethyl]amine]cobalt(III) and either hydroquinone or resorcinol gave the 1:3 adducts, with 3D extended structures showing the template effect of the complex.     

Construction and analytical application of a biosensor based on stearic acid-graphite powder modified with sweet potato tissue in organic solvents

A biosensor based on stearic acid-graphite powder modified with sweet potato (Ipomoea batatas (L.) Lam.) tissue as peroxidase source was constructed and applied in organic solvents. Several parameters were studied to evaluate the performance of this biosensor such as stearic acid-graphite powder and tissue composition, type and concentration of supporting electrolyte, organic solvents, water/organic solvent ratio (% v/v) and hydrogen peroxide concentration. After selection of the best conditions, the biosensor was applied for the determination of hydroquinone in cosmetic creams in methanol. At the peroxidase electrode hydroquinone is oxidized in the presence of hydrogen peroxide and the radical formed was reduced back electrochemically at -180 mV vs Ag/AgCl (3.0 mol L(-1) KCl). The reduction current obtained was proportional to the concentration of hydroquinone from 6.2 x 10(-5) to 1.5 x 10(-3) mol L(-1) (r = 0.9990) with a detection limit of 8.5 x 10(-6) mol L(-1). The recovery of hydroquinone from two samples ranged from 98.8 to 104.1% and an RSD lower than 1.0% for a solution containing 7.3 x 10(-4) mol L(-1) hydroquinone and 1.0 x 10(-3) mol L(-1) hydrogen peroxide in 0.10 mol L(-1) tetrabutylammonium bromide methanol-phosphate buffer solution (95:5% v/v) (n = 10) was obtained.     

Malonic acid concentration as a control parameter in the kinetic analysis of the Belousov-Zhabotinsky reaction under batch conditions

The influence of the initial malonic acid concentration [MA]0 (8.00 x 10(-3) < or = [MA]0 < or = 4.30 x 10(-2) mol dm(-3)) in the presence of bromate (6.20 x 10(-2) mol dm(-3)), bromide (1.50 x 10(-5) mol dm(-3)), sulfuric acid (1.00 mol dm(-3)) and cerium sulfate (2.50 x 10(-3) mol dm(-3)) on the dynamics and the kinetics of the Belousov-Zhabotinsky (BZ) reactions was examined under batch conditions at 30.0 degrees C. The kinetics of the BZ reaction was analyzed by the earlier proposed method convenient for the examinations of the oscillatory reactions. In the defined region of parameters where oscillograms with only large-amplitude relaxation oscillations appeared, the pseudo-first order of the overall malonic acid decomposition with a corresponding rate constant of 2.14 x 10(-2) min(-1) was established. The numerical results on the dynamics and kinetics of the BZ reaction, carried out by the known skeleton model including the Br2O species, were in good agreement with the experimental ones. The already found saddle node infinite period (SNIPER) bifurcation point in transition from a stable quasi-steady state to periodic orbits and vice versa is confirmed by both experimental and numerical investigations of the system under consideration. Namely, the large-amplitude relaxation oscillations with increasing periods between oscillations in approaching the bifurcation points at the beginning and the end of the oscillatory domain, together with excitability of the stable quasi-steady states in their vicinity are obtained.     

Self-assembly of multinuclear coordination species with chiral bipyridine ligands: silver complexes of 5,6-CHIRAGEN(o,m,p-xylidene) ligands and equilibrium behaviour in solution

The complexation reactions between Ag- and a series of enantiopure ligands belonging to the CHIRAGEN (from CHIRAlity GENerator) family (L1, L2, L3, based on (-)-5,6-pinene bipyridine) have been studied in solution. It has been shown that the length of the bridge plays a fundamental role in the self-assembly processes leading to different compounds: mononuclear complexes (with L3), mixtures of polynuclear complexes (with L2) and circular helicates (with L 1). Although the absolute configuration of the chiral centres in all three ligands is the same, the metal-centred chirality of L3 (delta) is inverted with respect to that in the other two complexes with L1 and L2 (delta). The metal configuration is thus opposite in the mononuclear complex with respect to the polynuclear species. Detailed thermodynamic studies were carried out for the Ag+ and L1 ligand system by 1H and 109Ag NMR spectroscopy (as a function of concentration, temperature and pressure). At low temperature and high pressure, the [Ag6L1(6)]6+ hexanuclear circular helicate forms a tetranuclear circular helicate [Ag4L1(4)]4+: 2[Ag6L1(6)]6+ <=> 3 [Ag4L1(4)]4+. The thermodynamics parameters, obtained by temperature and pressure variation, have the following values: K298 = (8.7 +/- 0.7) x 10(-5) mol x kg(-1), deltaHo = -15.65 +/- 0.8 kJ x mol(-1), deltaSo = -130.2 +/- 3 J x mol(-1) x K(-1) and deltaVo(256 K)= -160 +/- 12 cm3 x mol(-1). The reaction volume calculated according to Connolly's method indicates that the calculated structure of [Ag4L1(4)]4+ is plausible. Both the signs and large magnitudes of deltaSo and deltaVo are counterintuitive, yet can be understood by modelling methods.     

A double arene hydroxylation mediated by dicopper(II)-hydroperoxide species

The dicopper(II) complex [Cu(2)(L)](4+) (L = alpha,alpha'-bis[bis[2-(1'-methyl-2'-benzimidazolyl)ethyl]amino]-m-xylene) reacts with hydrogen peroxide to give the dicopper(II)-hydroquinone complex in which the xylyl ring of the ligand has undergone a double hydroxylation reaction at ring positions 2 and 5. The dihydroxylated ligand 2,6-bis([bis[2-(3-methyl-1H-benzimidazol-2-yl)ethyl]amino]methyl)benzene-1,4-diol was isolated by decomposition of the product complex. The incorporation of two oxygen atoms from H(2)O(2) into the ligand was confirmed by isotope labeling studies using H(2)(18)O(2). The pathway of the unusual double hydroxylation was investigated by preparing the two isomeric phenolic derivatives of L, namely 3,5-bis([bis[2-(1-methyl-1H-benzimidazol-2-yl)ethyl]amino]methyl)phenol (6) and 2,6-bis([bis[2-(1-methyl-1H-benzimidazol-2-yl)ethyl]amino]methyl)phenol (7), carrying the hydroxyl group in one of the two positions where L is hydroxylated. The dicopper(II) complexes prepared with the new ligands 6 and 7 and containing bridging micro-phenoxo moieties are inactive in the hydroxylation. Though, the dicopper(II) complex 3 derived from 6 and containing a protonated phenol is rapidly hydroxylated by H(2)O(2) and represents the first product formed in the hydroxylation of [Cu(2)(L)](4+). Kinetic studies performed on the reactions of [Cu(2)(L)](4+) and 3 with H(2)O(2) show that the second hydroxylation is faster than the first one at room temperature (0.13 +/- 0.05 s(-1) vs 5.0(+/-0.1) x 10(-3) s(-1)) and both are intramolecular processes. However, the two reactions exhibit different activation parameters (Delta H++ = 39.1 +/- 0.9 kJ mol(-1) and Delta S++ = -115.7 +/- 2.4 J K(-1) mol(-1) for the first hydroxylation; Delta H++ = 77.8 +/- 1.6 kJ mol(-1) and Delta S++ = -14.0 +/- 0.4 J K(-1) mol(-1) for the second hydroxylation). By studying the reaction between [Cu(2)(L)](4+) and H(2)O(2) at low temperature, we were able to characterize the intermediate eta(1):eta(1)-hydroperoxodicopper(II) adduct active in the first hydroxylation step, [Cu(2)(L)(OOH)](3+) [lambda(max) = 342 (epsilon 12,000), 444 (epsilon 1200), and 610 nm (epsilon 800 M(-1)cm(-1)); broad EPR signal in frozen solution indicative of magnetically coupled Cu(II) centers].     

Binding nucleophiles to [Fe4Y4Cl4](2-) (Y = S or Se) can increase or suppress the rate of proton transfer to the cluster

In the proton transfer reactions between [Fe 4Y 4Cl 4] (2-) (Y = S or Se) and [pyrH] (+) (pyr = pyrrolidine) in the presence of a variety of nucleophiles (L = I (-), Br (-), PhS (-), EtS (-) or ButNC), initial binding of the nucleophile can occur to generate [Fe 4Y 4Cl 4(L)] ( n- ). The subsequent rate of proton transfer depends markedly on the nature of L. Stopped-flow kinetic studies show that proton transfer from [pyrH] (+) to [Fe 4Y 4Cl 4] (2-) { (S) k 4 = (2.1 +/- 0.5) x 10 (4) dm (3) mol (-1) s (-1); (Se) k 4 = (8.0 +/- 0.5) x 10 (3) dm (3) mol (-1) s (-1)} is increased by prior binding of L = PhS (-) or Bu ( t )NC to form [Fe 4Y 4Cl 4(L)] (n-) ( (S) k 7 (L) approximately 1 x 10 (6) dm (3) mol (-1) s (-1)), but prior binding of L = I (-), Br (-), or EtS (-) to the clusters inhibits the rate of proton transfer {e.g. (S) k 7 (I) = (6.0 +/- 0.8) x 10 (2) dm (3) mol (-1) s (-1); (Se) k 7 (I) = (4.5 +/- 0.5) x 10 (2) dm (3) mol (-1) s (-1)}. This behavior is correlated with the bonding characteristics of L and the effect this has on bond length reorganization within the cluster upon proton transfer.     

Bimolecular kinetic studies with high-temperature gas-phase 19F NMR: cycloaddition reactions of fluoroolefins

A gas-phase NMR kinetic technique has been used for the first time to obtain accurate measurements of rate constants of some bimolecular, second-order cycloaddition reactions. As a test of the potential use of this technique for the study of second-order reactions, the rate constants and the activation parameters for the cyclodimerization reactions of chlorotrifluoroethylene (CTFE) and tetrafluoroethylene (TFE) were determined in the temperature range 240-340 degrees C, using a commercial high-temperature NMR probe. Obtaining excellent agreement of the results with published data, the technique was then applied to the reaction of 1,1-difluoroallene with 1,3-butadiene, the results of which indicate that the use of gas-phase NMR for reaction kinetics is particularly valuable when a reagent is available only in small amounts and in cases where there are several competing processes occurring simultaneously. The major processes observed in this reaction are regioselective [2+2] and [2+4] cycloadditions, whose rates and activation parameters were determined [k2 = 9.3 x 10(6) exp(-20.1 kcal x mol(-1)/RT) L/mol(-1) x s(-1) and k3 = 1.2 x 10(6) exp(-18.4 kcal x mol(-1)/RT) L/mol(-1) x s(-)(1), respectively] in the temperature range 130-210 degrees C.     

Crown compounds for anions: sandwich and half-sandwich complexes of cyclic trimetric perfluoro-o-phenylenemercury with polyhedral closo-[B10H10]2- and closo-[B12H12]2- anions

It has been shown by IR and NMR spectroscopy that cyclic trimeric perfluoro-o-phenylenemercury (o-C6F4-Hg)3 (1) is capable of binding closo-[B10H10]2- and closo-[B12H12]2- anions to form complexes [[(o-C6F4Hg)3](B10-H10)]2- (2), [[(o-C6F4Hg)3]2(B10H10)]2-(3), [[(o-C6F4Hg)3](B12H12)]2- (4), and [[(o-C6F4Hg)3]2(B12H12)]2- (5). According to IR data, the bonding of the [B10H10]2- and [B12H12]2- ions to the macrocycle in these complexes is accomplished through the formation of B-H-Hg bridges. Complexes 2, 3, and 5 have been isolated in analytically pure form and have been characterized by spectroscopic means. X-ray diffraction studies of 3 and 5 have revealed that these compounds have unusual sandwich structures, in which the polyhedral di-anion is located between the planes of two molecules of 1 and is bonded to each of them through two types of B-H-Hg bridges. One type is the simultaneous coordination of a B-H group to all three Hg atoms of the macrocycle. The other type is the coordination of a B-H group to a single Hg atom of the cycle. According to X-ray diffraction data, complex 2 has an analogous but half-sandwich structure. The obtained complexes 2-5 are quite stable; their stability constants in THF/acetone (1:1) at 20 degrees C have been determined as 1.0 x 10(2)Lmol(-1), 2.6 x 10(3)L(2)mol(2), 0.7 x 10(2)Lmol(-1), and 0.98 x 10(3)L(2)mol(-2), respectively.     

Determination of sulfur dioxide in vitriol plant wastewater by using a polyNiMe4TAA electrochemically modified Pt microelectrode

A Pt microelectrode modified with nickel(II) polytetramethyldibenzo[b,i]tetraaza[14]annulene was prepared by electropolymerization of nickel(II) tetramethyldibenzo[b,i]tetraaza[14]annulene monomers and applied to determine sulfur dioxide in vitriol plant wastewater. For determination of SO2 with this electrochemically modified Pt microelectrode, the linear range was from 9.6 x 10(-6) to 2.4 x 10(-4) mol L-1, the sensitivity was 1.8 x 10(-4) A L mol-1, the detection limit was calculated to be 4.8 x 10(-6) mol L-1 (S/N = 3), the response time was less than 20 s and the relative standard deviation was found to be 2.1% on analyzing 4.8 x 10(-5) mol L-1 SO2 solution repeatedly (n = 7). These results demonstrated good accuracy compared with those obtained by the conventional iodimetric method.     

Methanation of CO over nickel: Mechanism and kinetics at high H2/CO ratios

The CO methanation reaction over nickel was studied at low CO concentrations and at hydrogen pressures slightly above ambient pressure. The kinetics of this reaction is well described by a first-order expression with CO dissociation at the nickel surface as the rate-determining step. At very low CO concentrations, adsorption of CO molecules and H atoms compete for the sites at the surface, whereas the coverage of CO is close to unity at higher CO pressures. The ratio of the equilibrium constants for CO and H atom adsorption, K(CO)/K(H), was obtained from the rate of CO methanation at various CO concentrations. K(H) was determined independently from temperature programmed adsorption/desorption of hydrogen to be K(H) = 7.7 x 10(-4) (bar(-0.5)) exp[43 (kJ/mol)/RT] and hence the equilibrium constants for adsorption of CO molecules may be calculated to be K(CO) = 3 x 10(-7) (bar(-1)) exp[122 (kJ/mol)/RT]. Furthermore, the rate of dissociation of CO at the catalyst surface was determined to be 5 x 10(9) (s(-1)) exp[-96.7 (kJ/mol)/RT] assuming that 5% of the surface nickel atoms are active for CO dissociation. The results are compared to equilibrium and rate constants reported in the literature.     

High-performance liquid chromatography determination of nitrated polycyclic aromatic hydrocarbons by indirect fluorescence detection

A high-performance liquid chromatography (HPLC) method for the analysis of nitrated polcyclic aromatic hydrocarbons (NPAHs) is reported. NPAH mixtures were pre-concentrated using solid-phase extraction and well resolved on a C(18) column. They were detected using an indirect method involving the quenching of the emission from the fluorophores 5,6,7,8-tetrahydronaphthol (5,6,7,8-THN-1-OH), 7-amino-4-methyl coumarin (Coumarin 120, COU-120) and 3-hydroxy-4-(2-hydroxy-4-sulfo-1-naphthylazo)2-naphthalene carboxylic acid (Calcon carboxylic acid, CCA). Linear calibration curves were obtained in the range 1.1 x 10(-9) to 1.1 x 10(-8) mol/L. Using COU 120 as the fluorophore, the detection limit was 2.9 x 10(-10) mol/L for 1-nitronaphthalene and 2.1 x 10(-11) mol/L for 2-nitrofluorene. Recoveries of NPAHs from spiked tap water samples were between 88 and 100%.     

Syntheses and properties of emissive iridium(III) complexes with tridentate benzimidazole derivatives

A series of novel emissive Ir(III) complexes having the coordination environments of [Ir(N--N--N)2]3+, [Ir(N--N--N)(N--N)Cl]2+, and [Ir(N--N--N)(N--C--N)]2+ with 2,6-bis(1-methyl-benzimidazol-2-yl)pyridine (L1, N--N--N), 1,3-bis(1-methyl-benzimidazol-2-yl)benzene (L2H, N--C--N), 4'-(4-methylphenyl)-2,2':6',2' '-terpyridine (ttpy, N--N--N), and 2,2'-bipyridine (bpy, N--N) have been synthesized and their photophysical and electrochemical properties studied. The Ir(III) complexes exhibited phosphorescent emissions in the 500-600 nm region, with lifetimes ranging from approximately 1-10 micros at 295 K. Analysis of the 0-0 energies and the redox potentials indicated that the lowest excited state of [Ir(L1)(L2)]2+ possessed the highest contribution of 3MLCT (MLCT = metal-to-ligand charge transfer) among the Ir(III) complexes, reflecting the sigma-donating ability of the tridentate ligand, ttpy < L1 < L2. The emission quantum yields (phi) of the Ir(III) complexes ranged from 0.037 to 0.19, and the highest phi value (0.19) was obtained for [Ir(L1)(bpy)Cl]2+. Radiative rate constants (k(r)) were 1.2 x 10(4) s(-1) for [Ir(ttpy)2]3+, 3.7 x 10(4) s(-1) for [Ir(L1)(bpy)Cl]2+, 3.8 x 10(4) s(-1) for [Ir(ttpy)(bpy)Cl]2+, 3.9 x 10(4) s(-1) for [Ir(L1)2]3+, and 6.6 x 10(4) s(-1) for [Ir(L1)(L2)]2+. The highest radiative rate for [Ir(L1)(L2)]2+ with the highest contribution of 3MLCT could be explained in terms of the singlet-triplet mixing induced by spin-orbit coupling of 5d electrons in the MLCT electronic configurations.