Ultrafast Photoinduced Energy and Electron Transfer in Multi‐Modular Donor–Acceptor Conjugates

New multi‐modular donor–acceptor conjugates featuring zinc porphyrin (ZnP), catechol‐chelated boron dipyrrin (BDP), triphenylamine (TPA) and fullerene (C₆₀), or naphthalenediimide (NDI) have been newly designed and synthesized as photosynthetic antenna and reaction‐center mimics. The X‐ray structure of triphenylamine‐BDP is also reported. The wide‐band capturing polyad revealed ultrafast energy‐transfer (k_ENT=1.0×10¹² s^?1) from the singlet excited BDP to the covalently linked ZnP owing to close proximity and favorable orientation of the entities. Introducing either fullerene or naphthalenediimide electron acceptors to the TPA‐BDP‐ZnP triad through metal–ligand axial coordination resulted in electron donor–acceptor polyads whose structures were revealed by spectroscopic, electrochemical and computational studies. Excitation of the electron donor, zinc porphyrin resulted in rapid electron‐transfer to coordinated fullerene or naphthalenediimide yielding charge separated ion‐pair species. The measured electron transfer rate constants from femtosecond transient spectral technique in non‐polar toluene were in the range of 5.0×10⁹–3.5×10¹⁰ s^?1. Stabilization of the charge‐separated state in these multi‐modular donor–acceptor polyads is also observed to certain level.     

Excitation‐Wavelength‐Dependent,Ultrafast Photoinduced Electron Transfer in Bisferrocene/BF2‐Chelated‐Azadipyrromethene/Fullerene Tetrads

Donor–acceptor distance, orientation, and photoexcitation wavelength are key factors in governing the efficiency and mechanism of electron‐transfer reactions both in natural and synthetic systems. Although distance and orientation effects have been successfully demonstrated in simple donor–acceptor dyads, revealing excitation‐wavelength‐dependent photochemical properties demands multimodular, photosynthetic‐reaction‐center model compounds. Here, we successfully demonstrate donor– acceptor excitation‐wavelength‐dependent, ultrafast charge separation and charge recombination in newly synthesized, novel tetrads featuring bisferrocene, BF₂‐chelated azadipyrromethene, and fullerene entities. The tetrads synthesized using multistep synthetic procedure revealed characteristic optical, redox, and photo reactivities of the individual components and featured “closely” and “distantly” positioned donor–acceptor systems. The near‐IR‐emitting BF₂‐chelated azadipyrromethene acted as a photosensitizing electron acceptor along with fullerene, while the ferrocene entities acted as electron donors. Both tetrads revealed excitation‐wavelength‐dependent, photoinduced, electron‐transfer events as probed by femtosecond transient absorption spectroscopy. That is, formation of the Fc⁺–ADP–C₆₀^.? charge‐separated state upon C₆₀ excitation, and Fc⁺–ADP^.?–C₆₀ formation upon ADP excitation is demonstrated.     

Host–Guest Complexation of [60]Fullerenes and Porphyrins Enabled by “Click Chemistry”

Herein the synthesis, characterization, and organization of a first‐generation dendritic fulleropyrrolidine bearing two pending porphyrins are reported. Both the dendron and the fullerene derivatives were synthesized by Cu^I‐catalyzed alkyne–azide cycloaddition (CuAAC). The electron‐donor–acceptor conjugate possesses a shape that allows the formation of supramolecular complexes by encapsulation of C₆₀ within the jaws of the two porphyrins of another molecule. The interactions between the two photoactive units (i.e., C₆₀ and Zn–porphyrin) were confirmed by cyclic voltammetry as well as by steady‐state and time‐resolved spectroscopy. For example, a shift of about 85 mV was found for the first reduction of C₆₀ in the electron‐donor–acceptor conjugate compared with the parent molecules, which indicates that C₆₀ is included in the jaws of the porphyrin. The fulleropyrrolidine compound exhibits a rich polymorphism, which was corroborated by AFM and SEM. In particular, it was found to form supramolecular fibrils when deposited on substrates. The morphology of the fibrils suggests that they are formed by several rows of fullerene–porphyrin complexes.     

Photoinduced Electron Transfer within a Zinc Porphyrin–Cyclobis(paraquat‐p‐phenylene) Donor–Acceptor Dyad

Understanding the mechanism of efficient photoinduced electron‐transfer processes is essential for developing molecular systems for artificial photosynthesis. Towards this goal, we describe the synthesis of a donor–acceptor dyad comprising a zinc porphyrin donor and a tetracationic cyclobis(paraquat‐p‐phenylene) (CBPQT⁴⁺) acceptor. The X‐ray crystal structure of the dyad reveals the formation of a dimeric motif through the intermolecular coordination between the triazole nitrogen and the central Zn metal of two adjacent units of the dyad. Photoinduced electron transfer within the dyad in MeCN was investigated by femtosecond and nanosecond transient absorption spectroscopy, as well as by transient EPR spectroscopy. Photoexcitation of the dyad produced a weakly coupled ZnP^+.–CBPQT^3+. spin‐correlated radical‐ion pair having a τ=146 ns lifetime and a spin–spin exchange interaction of only 0.23 mT. The long radical‐ion‐pair lifetime results from weak donor–acceptor electronic coupling as a consequence of having nine bonds between the donor and the acceptor, and the reduction in reorganization energy for electron transfer caused by charge dispersal over both paraquat units within CBPQT^3+..     

Hierarchical Corannulene‐Based Materials: Energy Transfer and Solid‐State Photophysics

We report the first example of a donor–acceptor corannulene‐containing hybrid material with rapid ligand‐to‐ligand energy transfer (ET). Additionally, we provide the first time‐resolved photoluminescence (PL) data for any corannulene‐based compounds in the solid state. Comprehensive analysis of PL data in combination with theoretical calculations of donor–acceptor exciton coupling was employed to estimate ET rate and efficiency in the prepared material. The ligand‐to‐ligand ET rate calculated using two models is comparable with that observed in fullerene‐containing materials, which are generally considered for molecular electronics development. Thus, the presented studies not only demonstrate the possibility of merging the intrinsic properties of π‐bowls, specifically corannulene derivatives, with the versatility of crystalline hybrid scaffolds, but could also foreshadow the engineering of a novel class of hierarchical corannulene‐based hybrid materials for optoelectronic devices.     

Charge Separation in Graphene‐Decorated Multimodular Tris(pyrene)–Subphthalocyanine–Fullerene Donor–Acceptor Hybrids

A new approach to probe the effect of graphene on photochemical charge separation in donor–acceptor conjugates is devised. For this, multimodular donor–acceptor conjugates, composed of three molecules of pyrene, a subphthalocyanine, and a fullerene C₆₀ ((Pyr)₃SubPc‐C₆₀), have been synthesized and characterized. These systems were hybridized on few‐layer graphene through π–π stacking interactions of the three pyrene moieties. The hybrids were characterized using Raman, HRTEM, and spectroscopic and electrochemical techniques. The energy levels of the donor–acceptor conjugates were fine‐tuned upon interaction with graphene and photoinduced charge separation in the absence and presence of graphene was studied by femtosecond transient absorption spectroscopy. Accelerated charge separation and recombination was detected in these graphene‐decorated conjugates suggesting that they could be used as materials for fast‐responding optoelectronic devices and in light energy harvesting applications.     

Peculiar Photoinduced Electron Transfer in Porphyrin–Fullerene Akamptisomers

Porphyrin–fullerene dyads are promising candidates for organic photovoltaic devices. The electron-transfer (ET) properties of the molecular devices depend significantly on the mutual position of the donor and acceptor. Recently, a new type of molecular isomerism (akamptisomerism) has been discovered. In the present study, we explore how photoinduced ET can be modulated by passing from one akamptisomer to another. To this aim, four akamptisomers of the quinoxalinoporphyrin–[60]fullerene complex are selected for computational study. The most striking finding is that, depending on the isomer, the porphyrin unit in the dyad can act as either electron donor or electron acceptor. Thus, the stereoisomeric diversity allows one to change the direction of ET between the porphyrin and fullerene moieties. To understand the effect of akamptisomerism on the photoinduced ET processes, a detailed analysis of initial and final states involved in the ET is performed. The computed rate for charge separation is estimated to be in the region of 1–10 ns⁻¹. The formation of a long-living quinoxalinoporphyrin anion radical species is predicted.     

Ultrafast Photoinduced Charge Separation Leading to High‐Energy Radical Ion‐Pairs in Directly Linked Corrole–C60 and Triphenylamine–Corrole‐C60 Donor–Acceptor Conjugates

Closely positioned donor–acceptor pairs facilitate electron‐ and energy‐transfer events, relevant to light energy conversion. Here, a triad system TPACor‐C₆₀ , possessing a free‐base corrole as central unit that linked the energy donor triphenylamine ( TPA ) at the meso position and an electron acceptor fullerene (C₆₀) at the β‐pyrrole position was newly synthesized, as were the component dyads TPA‐Cor and Cor‐C₆₀ . Spectroscopic, electrochemical, and DFT studies confirmed the molecular integrity and existence of a moderate level of intramolecular interactions between the components. Steady‐state fluorescence studies showed efficient energy transfer from ¹ TPA* to the corrole and subsequent electron transfer from ¹corrole* to fullerene. Further studies involving femtosecond and nanosecond laser flash photolysis confirmed electron transfer to be the quenching mechanism of corrole emission, in which the electron‐transfer products, the corrole radical cation ( Cor^?+ in Cor‐C₆₀ and TPA‐Cor^?+ in TPACor‐C₆₀ ) and fullerene radical anion (C₆₀^??), could be spectrally characterized. Owing to the close proximity of the donor and acceptor entities in the dyad and triad, the rate of charge separation, k_CS, was found to be about 10¹¹ s^?1, suggesting the occurrence of an ultrafast charge‐separation process. Interestingly, although an order of magnitude slower than k_CS, the rate of charge recombination, k_CR, was also found to be rapid (k_CR≈10¹⁰ s^?1), and both processes followed the solvent polarity trend DMF>benzonitrile>THF>toluene. The charge‐separated species relaxed directly to the ground state in polar solvents while in toluene, formation of ³corrole* was observed, thus implying that the energy of the charge‐separated state in a nonpolar solvent is higher than the energy of ³corrole* being about 1.52 eV. That is, ultrafast formation of a high‐energy charge‐separated state in toluene has been achieved in these closely spaced corrole–fullerene donor–acceptor conjugates.     

Constructing a Strongly Absorbing Low‐Bandgap Polymer Acceptor for High‐Performance All‐Polymer Solar Cells

All‐polymer solar cells (all‐PSCs) offer unique morphology stability for the application as flexible devices, but the lack of high‐performance polymer acceptors limits their power conversion efficiency (PCE) to a value lower than those of the PSCs based on fullerene derivative or organic small molecule acceptors. We herein demonstrate a strategy to synthesize a high‐performance polymer acceptor PZ1 by embedding an acceptor–donor–acceptor building block into the polymer main chain. PZ1 possesses broad absorption with a low band gap of 1.55 eV and high absorption coefficient (1.3×10⁵ cm⁻¹). The all‐PSCs with the wide‐band‐gap polymer PBDB‐T as donor and PZ1 as acceptor showed a record‐high PCE of 9.19 % for the all‐PSCs. The success of our polymerization strategy can provide a new way to develop efficient polymer acceptors for all‐PSCs.     

Development of a Metal‐Ion‐Mediated Base Pair for Electron Transfer in DNA

A new C‐nucleoside structurally based on the hydroxyquinoline ligand was synthesized that is able to form stable pairs in DNA in both the absence and the presence of metal ions. The interactions between the metal centers in adjacent Cu^II‐mediated base pairs in DNA were probed by electron paramagnetic resonance (EPR) spectroscopy. The metal–metal distance falls into the range of previously reported values. Fluorescence studies with a donor–DNA–acceptor system indicate that photoinduced charge‐transfer processes across these metal‐ion‐mediated base pairs in DNA occur more efficiently than over natural base pairs.     

“Two‐Point” Self‐Assembly and Photoinduced Electron Transfer in meso‐Donor‐Carrying Bis(styryl crown ether)‐BODIPY–Bis(alkylammonium)fullerene Donor–Acceptor Conjugates

BF₂‐chelated dipyrromethene, BODIPY, was functionalized to carry two styryl crown ether tails and a secondary electron donor at the meso position. By using a “two‐point” self‐assembly strategy, a bis‐alkylammonium‐functionalized fullerene (C₆₀) was allowed to self‐assemble the crown ether voids of BODIPY to obtain multimodular donor–acceptor conjugates. As a consequence of the two‐point binding, the 1:1 stoichiometric complexes formed yielded complexes of higher stability in which fluorescence of BODIPY was found to be quenched; this suggested the occurrence of excited‐state processes. The geometry and electronic structure of the self‐assembled complexes were derived from B3LYP/3‐21G(*) methods in which no steric constraints between the entities was observed. An energy‐level diagram was established by using spectral, electrochemical, and computational results to help understand the mechanistic details of excited‐state processes originating from ¹bis‐styryl‐BODIPY*. Femtosecond transient absorbance studies were indicative of the formation of an exciplex state prior to the charge‐separation process to yield a bis‐styryl‐BODIPY ^{. +}–C₆₀ ^{. −} radical ion pair. The time constants for charge separation were generally lower than charge‐recombination processes. The present studies bring out the importance of multimode binding strategies to obtain stable self‐assembled donor–acceptor conjugates capable of undergoing photoinduced charge separation needed in artificial photosynthetic applications.     

Controlled self‐assembly of porphyrin/fullerene donor–acceptor complex in a polymer thin film

Thin films composed of polycyclohexane (PCHE), zinc(II)‐5,10,15,20‐tetra‐(2‐naphthyl)porphyrin (ZnTNpP), and [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (PCBM) blends are prepared to investigate their potential for the controlled self‐assembly of a porphyrin/fullerene donor–acceptor complex in a polymer thin film. The compatibilities of PCHE/PCBM (p), PCHE/ZnTNpP (q), and ZnTNpP/PCBM (r) in these blends have a significant effect on the dispersion of the ZnTNpP/PCBM donor–acceptor complex in the PCHE thin film. When the compatibilities are p << q, r, and q ≈ r, the ZnTNpP/PCBM donor–acceptor complex is formed between the PCHE and PCBM phases. This concept to form a controlled self‐assembly of the ZnTNpP/PCBM donor–acceptor complex may be applied to various combinations of porphyrin/fullerene systems in polymer thin film solar cells to achieve excellent performance. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 743–746     

Simple and Versatile Molecular Donors for Organic Photovoltaics Prepared by Metal‐Free Synthesis

Donor–acceptor molecules (D‐π‐A) built by connecting a diphenylhydrazone block to a dicyanovinyl acceptor group via various thiophene‐based π‐conjugating spacers ( 1 – 5 ) were synthesized from mono‐ or dialdehydes by a simple metal‐free procedure. Cyclic voltammetry and UV/Vis absorption spectroscopy show that the extension and/or increase of the donor strength of the spacer produces a decrease of the HOMO and LUMO energy level, a red shift of the absorption spectrum and an increase of the molecular absorption coefficient. Compared to solutions, the optical spectra of spin‐cast thin films of compounds 1–3 show a broadening and red shift of the absorption bands, consistent with the formation of J‐aggregates. In contrast the blue shift observed for the EDOT‐containing compounds 4 and 5 suggests the presence of H‐aggregates. Solution‐cast and vacuum‐deposited films of donors 1–5 were evaluated in solar cells with fullerene C₆₀ as acceptor. A power‐conversion efficiency among the highest reported for bilayer devices of basic configuration was obtained with compound 2 . On the other hand, the results obtained with 4 and 5 suggest that the presence of EDOT in the structure can have deleterious effects on the organization and performances of the donor material.     

Porphyrin–Fullerene Dyad Based on Indium(III) Complex. Donor–Acceptor Complex Formation Equilibrium

Formation kinetics and spectral properties of the donor–acceptor complexes of (5,10,15,20- tetra(2-methoxyphenyl)porphinato)chloroindium(III) with 2′-(pyridin-4-yl)-5′-(pyridin-2-yl)-1′-(pyridin- 2-yl)methylpyrrolidinyl[3′,4′:1,2][60]fullerene were studied. The formation of the donor–acceptor dyad [(Py₃F)InTPP(2-OCH₃)₄]⁺Cl^– occurs as a two-step reaction, including fast reversible coordination of the fullerene base molecule and slow irreversible displacement of the axial chloride ion to the second coordination sphere. Quantitative characteristics for the reaction rate and equilibrium were obtained. The reaction products were identified by IR and ¹H NMR spectroscopy. The most important electron optical and stability parameters of the porphyrin–fullerene dyads with inner- and outer-sphere chloride ions were determined. These results are important for studies of the photophysics of porphyrin–fullerene dyads and development of photoconverters based on them.     

Push–Pull Buta‐1,2,3‐trienes: Exceptionally Low Rotational Barriers of Cumulenic CC Bonds and Proacetylenic Reactivity

A variety of asymmetrically donor–acceptor‐substituted [3]cumulenes (buta‐1,2,3‐trienes) were synthesized by developed procedures. The activation barriers to rotation ΔG^≠ were measured by variable temperature NMR spectroscopy and found to be as low as 11.8 kcal mol^?1, in the range of the barriers for rotation around sterically hindered single bonds. The central C?C bond of the push–pull‐substituted [3]cumulene moiety is shortened down to 1.22 Å as measured by X‐ray crystallography, leading to a substantial bond length alternation (BLA) of up to 0.17 Å. All the experimental results are supported by DFT calculations. Zwitterionic transition states (TS) of bond rotation confirm the postulated proacetylenic character of donor–acceptor [3]cumulenes. Additional support for the proacetylenic character of these chromophores is provided by their reaction with tetracyanoethene (TCNE) in a cycloaddition‐retroelectrocyclization (CA–RE) cascade characteristic of donor‐polarized acetylenes.     

Precise Control of Intramolecular Charge‐Transport: The Interplay of Distance and Conformational Effects

A new series of donor–bridge–acceptor (D–B–A) compounds consisting of π‐conjugated oligofluorene (oFL) bridges between a ferrocene (Fc) electron‐donor and a fullerene (C₆₀) electron‐acceptor have been synthesized. In addition to varying the length of the bridge (i.e., mono‐ and bi‐fluorene derivatives), four different ways of linking ferrocene to the bridge have been examined. The Fc moiety is linked to oFL: 1) directly without any spacer, 2) by an ethynyl linkage, 3) by a vinylene linkage, and 4) by a p‐phenylene unit. The electronic interactions between the electroactive species have been characterized by cyclic voltammetry, absorption, fluorescence, and transient absorption spectroscopy in combination with quantum chemical calculations. The calculations reveal exceptionally close energy‐matching between the Fc and the oFL units, which results in strong electronic‐coupling. Hence, intramolecular charge‐transfer may easily occur upon exciting either the oFLs or Fcs. Photoexcitation of Fc–oFL–C₆₀ conjugates results in transient radical‐ion‐pair states. The mode of linkage of the Fc and FL bridge has a profound effect on the photophysical properties. Whereas intramolecular charge‐separation is found to occur rather independently of the distance, the linker between Fc and oFL acts (at least in oFL) as a bottleneck and significantly impacts the intramolecular charge‐separation rates, resulting in beta values between β_CS 0.08 and 0.19 Å^?1. In contrast, charge recombination depends strongly on the electron‐donor–acceptor distance, but not at all on the linker. A value of β_CR (0.35±0.01 Å^?1) was found for all the systems studied. Oligofluorenes prove, therefore, to be excellent bridges for probing how small structural variations affect charge transport in D–B–A systems.     

Photoconductivity in Metal–Organic Framework (MOF) Thin Films

Photoconductivity is a characteristic property of semi‐conductors. Herein, we present a photo‐conducting crystalline metal–organic framework (MOF) thin film with an on–off photocurrent ratio of two orders of magnitude. These oriented, surface‐mounted MOF thin films (SURMOFs), contain porphyrin in the framework backbone and C₆₀ guests, loaded in the pores using a layer‐by‐layer process. By comparison with results obtained for reference MOF structures and based on DFT calculations, we conclude that donor–acceptor interactions between the porphyrin of the host MOF and the C₆₀ guests give rise to a rapid charge separation. Subsequently, holes and electrons are transported through separate channels formed by porphyrin and by C₆₀, respectively. The ability to tune the properties and energy levels of the porphyrin and fullerene, along with the controlled organization of donor–acceptor pairs in this regular framework offers potential to increase the photoconduction on–off ratio.     

Donor–Acceptor Complex Enables Alkoxyl Radical Generation for Metal‐Free C(sp3)–C(sp3) Cleavage and Allylation/Alkenylation

The alkoxyl radical is an essential and prevalent reactive intermediate for chemical and biological studies. Here we report the first donor–acceptor complex‐enabled alkoxyl radical generation under metal‐free reaction conditions induced by visible light. Hantzsch ester forms the key donor–acceptor complex with N ‐alkoxyl derivatives, which is elucidated by a series of spectrometry and mechanistic experiments. Selective C(sp³)‐C(sp³) bond cleavage and allylation/alkenylation is demonstrated for the first time using this photocatalyst‐free approach with linear primary, secondary, and tertiary alkoxyl radicals.     

A new polymer acceptor containing naphthalene diimide and 1,3,4‐thiadiazole for all‐polymer solar cells

A n‐type conjugated polymer containing naphthalene diimide (NDI) and 1,3,4‐thiadiazole (TZ) moieties, named PNTZ, has been synthesized and applied for all‐polymer solar cells (all‐PSCs). By the incorporation of TZ unit into the polymer main chains, the lowest unoccupied molecular orbital level of this polymer has been adjusted effectively. In addition, the electron‐acceptor PNTZ shows a broad absorption spectrum in the range of 300–700 nm, and possesses complementary absorption spectrum with the electron‐donor PTB7‐Th. On the basis of PNTZ as the acceptor and PTB7‐Th as the donor, the all‐PSCs are fabricated. After optimization, the well blend morphologies with a continuous D/A interpenetrating network are observed and the best all‐PSC device exhibits a power conversion efficiency of 4.35% with a high short‐circuit current density of 13.26 mA cm^?2. This research demonstrates that the TZ‐containing polymer PNTZ is a promising non‐fullerene acceptor for high efficiency all‐PSCs. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55 , 990–996     

Ruthenium(II)–Polyimine–Coumarin Light‐Harvesting Molecular Arrays: Design Rationale and Application for Triplet–Triplet‐Annihilation‐Based Upconversion

Ru^II–bis‐pyridine complexes typically absorb below 450 nm in the UV spectrum and their molar extinction coefficients are only moderate (ε<16 000 M ^?1 cm^?1). Thus, Ru^II–polyimine complexes that show intense visible‐light absorptions are of great interest. However, no effective light‐harvesting ruthenium(II)/organic chromophore arrays have been reported. Herein, we report the first visible‐light‐harvesting Ru^II–coumarin arrays, which absorb at 475 nm (ε up to 63 300 M ^?1 cm^?1, 4‐fold higher than typical Ru^II–polyimine complexes). The donor excited state in these arrays is efficiently converted into an acceptor excited state (i.e., efficient energy‐transfer) without losses in the phosphorescence quantum yield of the acceptor. Based on steady‐state and time‐resolved spectroscopy and DFT calculations, we proposed a general rule for the design of Ru^II–polypyridine–chromophore light‐harvesting arrays, which states that the ¹IL energy level of the ligand must be close to the respective energy level of the metal‐to‐ligand charge‐transfer (M LCT) states. Lower energy levels of ¹IL/³IL than the corresponding ¹M LCT/³M LCT states frustrate the cascade energy‐transfer process and, as a result, the harvested light energy cannot be efficiently transferred to the acceptor. We have also demonstrated that the light‐harvesting effect can be used to improve the upconversion quantum yield to 15.2 % (with 9,10‐diphenylanthracene as a triplet‐acceptor/annihilator), compared to the parent complex without the coumarin subunit, which showed an upconversion quantum yield of only 0.95 %.