New ROMP Synthesis of Ferrocenyl Dendronized Polymers

First‐ and second‐generation Percec‐type dendronized ferrocenyl norbornene macromonomers containing, respectively, three and nine ferrocenyl termini are synthesized and polymerized by ring‐opening metathesis polymerization using Grubbs' third‐generation olefin metathesis catalyst with several monomer/catalyst feed ratios between 10 and 50. The rate of polymerization is highly dependent on the generation of the dendronized macromonomers, but all these ring‐opening metathesis polymerization reactions are controlled, and near‐quantitative monomer conversions are achieved. The numbers of ferrocenyl groups obtained are in agreement with the theoretical ones according to the cyclic voltammetry studies as determined using the Bard–Anson method.     

Main‐chain chiral poly(2‐oxazoline)s: Influence of alkyl side‐chain on secondary structure formation in solution

The synthesis and microwave‐assisted polymerization of a series of chiral 2‐oxazolines with varying alkyl pendant groups, namely R‐2‐ethyl‐4‐ethyl‐2‐oxazoline (R‐EtEtOx), R‐2‐butyl‐4‐ethyl‐2‐oxazoline (R‐BuEtOx), R‐2‐octyl‐4‐ethyl‐2‐oxazoline, 2‐nonyl‐4‐ethyl‐2‐oxazoline, and R‐2‐undecyl‐4‐ethyl‐2‐oxazoline (R‐UndeEtOx), are reported. A kinetic investigation of the polymerization of R‐EtEtOx revealed a living polymerization mechanism. The poly(2‐oxazoline)s containing an ethyl, butyl, and octyl pendant group form similar chiral structures according to circular dichroism measurements. When the pendant group is further elongated, the chiral structure becomes more flexible in trifluoroethanol and the thermal response in hexafluoroisopropanol (HFIP) significantly changes. The short‐range structure of poly‐R‐BuEtOx dissolved in HFIP is thermoresponsive in a complex way, due to HFIP hydrogen bonding to the polymeric amide groups, whereas the long‐range structure determined from small angle neutron scattering is insensitive to temperature demonstrating that only the local secondary structure changes with temperature. In addition, the chiral structure of poly‐R‐UndeEtOx depends on the polarity of the solvent. The short‐range structure becomes more flexible in polar solvents, most likely due to interactions with the amide groups disturbing the secondary structure. In contrast, the long‐range structural transition from an ellipsoid in the apolar n‐hexane to a rod structure in the polar n‐butanol is ascribed to better solvation of the long aliphatic side chains. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of polynorbornene‐poly(tert‐butyl acrylate) nanoparticles with original morphologies by tandem ROMP and ATRP in microemulsion

Composite latex particles based on homopolymers and graft‐copolymers composed of polynorbornene (PNB) and poly(tert‐butyl acrylate) (PtBA) were synthesized in microemulsion conditions by simultaneous combination of two distinct methods of polymerization: Ring‐opening metathesis polymerization (ROMP) and atom transfer radical polymerization (ATRP). Only one commercial compound (first generation Grubbs catalyst) was used to initiate the ROMP of norbornene (NB) and activate the ATRP of tert‐butyl acrylate (tBA). Well‐defined nanoparticles with hydrodynamic diameters smaller than 50 nm were prepared with original morphologies depending on the monomer compositions, the type of combination (polymer blend or graft‐copolymer), and the conditions of microemulsion polymerizations. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

钌催化降冰片烯开环移位聚合的研究

CpRuCl(PPh~3)~2/O~2和CH~3OCH~2CH~2CpRuCl(PPh~3)~2/O~2体系对降冰片(NBE)开环移位聚合(ROMP)有活性,降冰片烯的转化率和聚降冰片烯主链双键顺反比与气氛催化剂摩尔比及催化剂本身性质有关。在实验的基础上提出了钌催化降冰片烯开环移位聚合的可能机理。     

Phenylenevinylene Block Copolymers via Ring‐Opening Metathesis Polymerization

Fully conjugated block copolymers containing 1,4‐ and 1,3‐phenylenevinylene repeating units can be prepared by the sequential ring opening metathesis polymerization of strained cyclophanedienes, initiated by ruthenium carbene complexes (Grubbs metathesis catalysts). The molecular weight of the constituent blocks can be tightly controlled by changing the catalyst to monomer ratio and the volume fraction of the block copolymers independently tailored by the ratio of the monomers employed. Extensive phase separation between the constituent blocks is observed in thin films of these polymers by atomic force microscopy and efficient energy transfer between blocks containing 1,4‐ and 1,3‐phenylenevinylene units can be seen in the photoluminescence of these materials.

     

C2-symmetric planar chiral ferrocene diamides by (-)-sparteine-mediated directed ortho-lithiation. Synthesis and catalytic activity

[reaction: see text] A variety of highly enantioenriched singly and doubly (4) functionalized derivatives of 1,1'-N,N,N',N'-tetraisopropylferrocenedicarboxamide 1 have been synthesized by (-)-sparteine (2)-mediated directed ortho-metalation and Pd-catalyzed cross coupling reactions. The synthetic applications of these chiral ligands in asymmetric alkylation of benzaldehyde and Pd(0)-catalyzed allylic substitution have been demonstrated.     

Living ROMP Synthesis and Redox Properties of Diblock Ferrocene/Cobalticenium Copolymers

Using the third‐generation Grubbs catalyst, the living ring‐opening metathesis polymerization of ferrocene/cobalticenium copolymers is conducted with theoretical numbers of 25 monomer units for each block, and their redox and electrochemical properties allow using the Bard–Anson electrochemical method to determine the number of metallocenyl units in each block.

     

Nanostructured polymer composite nanoparticles synthesized in a single step via simultaneous ROMP and ATRP under microemulsion conditions

Ring‐Opening Metathesis Polymerization (ROMP) and Atom‐Transfer Radical Polymerization (ATRP) were carried out simultaneously under microemulsion conditions with 1st generation Grubbs catalyst playing a double role: ROMP initiator and ATRP controlling agent. Starting from two distinct microemulsions—one containing the monomers and the other the catalyst—well‐defined composite nanoparticles with z‐average hydrodynamic diameter smaller than 50 nm were prepared. Depending on the monomers droplet composition, homopolymers blends or graft‐copolymers were synthesized in a one‐pot, one‐step, one‐catalyst approach. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4014–4027, 2009     

Synthesis of optically active 2-hydroxy monoesters via-kinetic resolution and asymmetric cyclization catalyzed by heterometallic chiral (salen) Co complex

The binuclear chiral (salen) Co complexes bearing Lewis acids of Al and Ga catalyze regio- and enantioselective ring opening of terminal epoxides with carboxylic acids. The ring opened product of epichlorohydrin with carboxylic acids followed by cyclization step in the presence of catalyst and base represent straightforward, efficient methods for the synthesis of enatiomerically enriched (>99% ee) valuable terminal epoxides. Strong synergistic effects of different Lewis acid of Co-Al and Co-Ga were exhibited in the catalytic process.     

Ring‐opening metathesis polymerization of amino acid‐functionalized norbornene derivatives

Amino acid‐derived novel norbornene derivatives, N,N′‐(endo‐bicyclo[2.2.1] hept‐5‐en‐2,3‐diyldicarbonyl) bis‐L ‐alanine methyl ester (NBA), N,N′‐(endo‐bicyclo[2.2.1]hept‐5‐en‐2,3‐diyldicarbonyl) bis‐L ‐leucine methyl ester (NBL), N,N′‐(endo‐bicyclo[2.2.1]hept‐5‐en‐2,3‐diyldicarbonyl) bis‐L ‐phenylalanine methyl ester (NBF) were synthesized and polymerized using the Grubbs 2nd generation ruthenium (Ru) catalyst. Although NBA, NBL, and NBF did not undergo homopolymerization, they underwent copolymerization with norbornene (NB) to give the copolymers with M_n ranging from 5200 to 38,100. The maximum incorporation ratio of the amino acid‐based unit was 9%, and the cis contents of the main chain were 54–66%. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5337–5343, 2006     

Synthesis and characterization of L‐leucine containing chiral vinyl monomer and its polymer,poly(2‐(methacryloyloxyamino)‐4‐methyl pentanoic acid)

A chiral monomer containing L ‐leucine as a pendant group was synthesized from methacryloyl chloride and L ‐leucine in presence of sodium hydroxide at 4 °C. The monomer was polymerized by free radical polymerization in propan‐2‐ol at 60 °C using 2,2′‐azobis isobutyronitrile (AIBN) as an initiator under nitrogen atmosphere. The polymer, poly(2‐(Methacryloyloxyamino)‐4‐methyl pentanoic acid) is thus obtained. The molecular weight of the polymer was determined to be: M_w is 6.9 × 10³ and M_n is 5.6 × 10³. The optical rotation of both chiral monomer and its polymer varies with the solvent polarity. The amplification of optical rotation due to transformation of monomer to polymer is associated with the ordered conformation of chiral monomer unit in the polymeric chain due to some secondary interactions like H‐bonding. The synthesized monomer and polymer exhibit intense Cotton effect at 220 nm. The conformation of the chain segments is sensitive to external stimuli, particularly the pH of the medium. In alkaline medium, the ordered chain conformation is destroyed resulting disordered random coils. The ordered coiling conformation is more firmly present on addition of HCl. The polymer exhibits swelling‐deswelling characteristics with the change of pH of the medium, which is reversible. The Cotton effect decreases linearly with the increase of temperature which is reversible on cooling. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2228–2242, 2009     

Alternating Ring‐Opening Metathesis Copolymerization by Grubbs‐Type Initiators with Unsymmetrical N‐Heterocyclic Carbenes

A series of Ru^IV–alkylidenes based on unsymmetrical imidazolin‐2‐ylidenes, that is, [RuCl₂{1‐(2,4,6‐trimethylphenyl)‐3‐R‐4,5‐dihydro‐(3H)‐imidazol‐1‐ylidene}(CHPh)(pyridin)] (R=CH₂Ph ( 5 ), Ph ( 6 ), ethyl ( 7 ), methyl ( 8 )), have been synthesized. These and the parent initiators [RuCl₂(PCy₃){1‐(2,4,6‐trimethylphenyl)‐3‐R‐4,5‐dihydro‐(3H)‐imidazol‐1‐ylidene}(CHC₆H₅)] (R=CH₂C₆H₅ ( 1 ), C₆H₅ ( 2 ), ethyl ( 3 )) were used for the alternating copolymerization of norborn‐2‐ene (NBE) with cis‐cyclooctene (COE) and cyclopentene (CPE), respectively. Alternating copolymers, that is, poly(NBE‐alt‐COE)_n and poly(NBE‐alt‐CPE)_n containing up to 97 and 91 % alternating diads, respectively, were obtained. The copolymerization parameters of the alternating copolymerization of NBE with CPE under the action of initiators 1 – 3 and 5 – 8 were determined by using both a zero‐ and first‐order Markov model. Finally, kinetic investigations using initiators 1 – 3 , 6 , and 7 were carried out. These revealed that in contrast to the 2nd‐generation Grubbs‐type initiators 1 – 3 the corresponding pyridine derivatives 6 and 7 represent fast and quantitative initiating systems. Hydrogenation of poly(NBE‐alt‐COE)_n yielded a fully saturated, hydrocarbon‐based polymer. Its backbone can formally be derived by 1‐olefin polymerization of CPE (1,3‐insertion) followed by five ethylene units and thus serves as an excellent model compound for 1‐olefin polymerization‐derived copolymers.     

Functional Monolithic Materials for Boronate‐Affinity Chromatography via Schrock Catalyst‐Triggered Ring‐Opening Metathesis Polymerization

Monolithic polymeric materials are prepared via ring‐opening metathesis copolymerization of norborn‐2‐ene with 1,4,4a,5,8,8a‐hexahydro‐1,4,5,8‐exo,endo‐dimethanonaphthalene in the presence of macro‐ and microporogens, that is, of n‐hexane and 1,2‐dichloroethane, using the Schrock catalyst Mo(N‐2,6‐(2‐Pr)₂‐C₆H₃)(CHCMe₂Ph)(OCMe₃)₂. Functionalization of the monolithic materials is accomplished by either terminating the living metal alkylidenes with various functional aldehydes or by post‐synthesis grafting with norborn‐5‐en‐2‐ylmethyl‐4‐(4,4,5,5‐tetramethyl‐1,3,2‐dioxaborolan‐2‐yl)benzoate. Finally, boronate‐grafted monolithic columns (100 × 3 mm i.d.) are successfully applied to the affinity chromatographic separation of cis‐diol‐based biomolecules.     

Electrochemically generated tungsten‐based active species as catalysts for metathesis‐related reactions: 2. Ring‐opening metathesis polymerization of norbornene

The present work reports the application of the WCl₆–e^?–Al–CH₂Cl₂ catalyst system to the ring‐opening metathesis polymerization of norbornene. Analysis of the polynorbornene microstructure by means of ¹H and ¹³C NMR spectroscopy indicates that the polymer contains a mainly cis stereoconfiguration of the double bonds (σ_c = 0.61) and a blocky distribution (r_tr_c > 1) of cis and trans double bonds (r_tr_c = 3.37). This catalytic system is reluctant to facilitate the competing addition reactions of cycloalkenes while proceeding with the polymerization reactions with good conversions and at short periods. Copyright © 2004 John Wiley & Sons, Ltd.     

Novel Photoresponsive Linear,Graft, and Comb‐Like Copolymers with Azobenzene Chromophores in the Main‐Chain and/or Side‐Chain: Facile One‐Pot Synthesis and Photoresponse Properties

Novel photoresponsive linear, graft, and comb‐like copolymers with azobenzene chromophores in the main‐chain and/or side‐chain are prepared via a sequential ring‐opening metathesis polymerization (ROMP) and head‐to‐tail acyclic diene metathesis (ADMET) polymerization in a one‐pot procedure using Grubbs ruthenium‐based catalysts. The diluted solutions of these as‐prepared copolymers containing azobenzene chromophores exhibit photochemical trans–cis isomerization under the irradiation of UV light, followed by their cis–trans back‐isomerization in visible light. The rates of photoisomerization are found to be slower than those of back‐isomerization, and the rate for the comb‐like copolymer is found to be from 3 to 7 times slower than that obtained for the linear or graft copolymer. This is ascribed to the differences in structure of the copolymers and the specific location of azobenzene chromophores in the copolymer, which favor a side‐chain graft structure.

     

Electronic and chelation effects on the unusual C2-methylation of N-(para-substituted)phenylaziridines with lithium organocuprates

Density functional theory calculations with the B3LYP functional were performed for the title ring‐opening reaction to understand the intrinsic activating and directing effects of the N‐substituents, as well as the electron donating effect of the para‐substituted (Y = Cl, H, Me) phenyl group at the more hindered benzylic C2 atom. The N‐tosyl group (i.e., N‐Tos) or the N‐(2‐pyridyl)sulfonyl group (i.e., N‐Py) was introduced to activate the ring nitrogen atom (N1) and the para‐substituted (Y = Cl, H, Me) phenyl group for the activation of the C2 atom. Conformational searches and geometry optimizations were performed for the N‐(para‐substituted)phenylaziridines ( 1 ～ 6 ). Calculations indicate that the aziridine 6 (i.e., Py/Me) has the most elongated C2? N1 bond intrinsically due to the electronic activating effects, implying the aziridine 6 to be the most potent candidate for the more‐hindered C2 opening. Transition states (TSs) were investigated for the prospective ring‐opening paths (I～IV), considering the types of intermolecular push–pull interactions between the N‐activated phenylaziridines and the cuprate. The N‐Py group provides an unique C2‐favored TS along the path IV, which the N‐Tos group cannot afford, due to the less charge transfer from the nucleophilic CH of the cuprate into the electrophilic C2 atom. Furthermore, the e‐donating effect of the para‐substituents (Y = Cl, H, Me) enhances the C2 opening for the path IV. This study enables us to understand the unusual ring‐opening phenomena in terms of electronic and directing effects and hence may serve as a tool to design substrates for highly regioselective ring openings. © 2011 Wiley Periodicals, Inc. J Comput Chem, 2011     

Characterization of the micellar ring opening metathesis polymerization in water of a norbornene derivative initiated by Hoveyda‐Grubbs' catalyst

Solubilization of the hydrophobic Hoveyda‐Grubbs' catalyst in micellar aqueous phase has been achieved using dodecyl and cetyl ammonium chloride as surfactants. The domain of solubilization has been estimated before carrying out ring‐opening metathesis polymerization in these micellar solutions with a hydrophilic monomer. Kinetics orders have been determined relative to monomer, initiator, and surfactant. A good control of the molecular weight has been obtained for ratios [micelles]/[initiator] over 1. The better control of the polymerization obtained in micellar solution has been explained by a difference of reactivity leading to a more efficient initiation step in the presence of the micelles. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2833–2844, 2008