Controlled evaporative self-assembly of polymer nanoribbons using oscillating capillary bridges

Evaporative self-assembly (ESA), based on the “coffee-ring” effect, is a versatile technique for assembling particle solutions into mesoscale patterns and structures on different substrates. ESA works with a wide variety of organic and inorganic materials, where the solution is a combination of volatile solvent and nonvolatile solute. Modified ESA methods, such as “stop-and-go flow coating,” use a programmed meniscus “stick–slip” motion to create mesoscale assemblies with controlled shape, size, and architecture. However, current methods are not scalable for increased production volumes or patterning large surface areas. We demonstrate a new ESA method, where an oscillating blade controls the meniscus depinning and drives the evaporative assembly of solutes at the pinned meniscus. Results show that oscillation frequency and substrate speed control time/distance intervals between successive meniscus depinning, and the assembly dimensions depend on solution concentration, oscillation frequency, substrate speed, and meniscus height. We report the mechanism of the meniscus depinning and the control over assembly cross-sectional dimensions. This advance provides a scalable ESA method with faster processing times and maintained advantages. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1545–1551     

Study of mechanics of physically transient electronics: A step toward controlled transiency

Transient electronics is a class of electronic devices designed to maintain stable operation for a desired and preset amount of time; and, undergo fast and complete degradation and deconstruction once transiency is triggered. Controlled and programmed transiency in solvent‐triggered devices is strongly dependent on chemical and physical interactions between the solvent and the device, as well as those within the device itself, among its constituent components. Mechanics of transiency of prototypical transient circuits demonstrate strong dependence of the transiency characteristics on that of the substrate. In the present study, we demonstrate the control of transiency through the dissolution behavior of a substrate for the devices with electronic parts composed of colloidal units. It is observed that the physical circuit–substrate interactions are the dominating factors in defining the overall transiency behavior of the device. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 517–524     

Influence of substrate nature and growth conditions on the morphology of thin DMOAP films

We report some preliminary results on the morphology of thin N,N -dimethyl-n-octadecyl-3-aminopropyltrimethoxysilyl chloride (DMOAP) films. When deposited on a glass substrate, DMOAP forms a mono- or multi-layer structure parallel to the substrate. The surface topography of the film is probed by atomic force microscopy. In general, the free surface of such a film is not flat and smooth. Islands and holes are formed on the free surface of the films when a sufficiently flat substrate is used. The thin film surface topography depends strongly on the nature of the bare substrate, the curing conditions, and the immersion time of the substrate in the DMOAP solution. The film is always rougher than the bare substrate used. Annealing roughens the surface of the alkoxysilane thin films deposited on a glass substrate. For films on glass plates covered with an indium tin oxide layer, annealing has minor effects. The surface topography affects the microstructure of homeotropic smectic samples.     

Fabrication of gradient colloidal topography

A rather simple but yet effective way to self-assemble polystyrene (PS) beads in gradient colloidal crystal topography is proposed. The PS bead concentration, solvent, and substrate have a big effect on the colloidal crystal topography. Whether the gradient-shaped crystals can form or not depends on the Bond number [Bo; the ratio of gravitational potential energy (G) to adhesive energy (E(a)), or gravitational to capillary forces]. When Bo < 1, that is, the capillary force dominates over the gravitational force, the liquid meniscus is stable. The gradient-shaped crystals can form. Otherwise, PS beads form a uniform multilayer structure.     

Preparation of sterically stabilized gold nanoparticles for plasmonic applications

Plasmonic nanoparticles such as those of gold or silver have been recently investigated as a possible way to improve light absorption in thin film solar cells. Here, a simple method for the preparation of spherical plasmonic gold nanoparticles in the form of a colloidal solution is presented. The nanoparticle diameter is controlled in the range from several nm to tens of nm depending on the synthesis parameters with the size dispersion down to 14 %. The synthesis is based on thermal decomposition and reduction of the chloroauric acid in the presence of a stabilizing capping agent (surfactant) that is very slowly injected into the hot solvent. The surfactant prevents uncontrolled nanoparticle aggregation during the growth process. The nanoparticle size and shape depend on the type of the stabilizing agent. Surfactants with different lengths of the hydrocarbon chains such as Z-octa-9-decenylamine (oleylamine) with AgNO₃ and polyvinylpyrrolidone with AgNO₃ were used for the steric stabilization. Hydrodynamic diameter of the gold nanoparticles in the colloidal solution was determined by dynamic light scattering while the size of the nanoparticle metallic core was found by small-angle X-ray scattering. The UV-VIS-NIR spectrophotometer measurements revealed a plasmon resonance absorption in the 500–600 nm range. Self-assembled nanoparticle arrays on a silicon substrate were prepared by drop casting followed by spontaneous evaporation of the solvent and by a modified Langmuir-Blodgett deposition. The degree of perfection of the self-assembled arrays was analyzed by scanning electron microscopy and grazing-incidence small-angle X-ray scattering. Homogeneous close-packed hexagonal ordering of the nanoparticles stretching over large areas was evidenced. These results document the viability of the proposed nanoparticle synthesis for the preparation of high-quality plasmonic templates for thin film solar cells with enhanced power conversion efficiency, surface enhanced Raman scattering, and other applications.     

Photocycloaddition‐induced preparation of nanostructured,cyclic polymers using biscinnamated or biscoumarinated oligo(ethylene glycol)s

Two types of photoreactive water‐soluble oligo(ethylene glycol)s (OEGs; M_n = ca. 6500) were prepared by derivatization of OEG with photodimerizable groups such as cinnamates or coumarinates at both ends. Upon UV light irradiation of biscinnamated OEG in an aqueous solution, almost all trans‐cinnamate groups were isomerized to cis form in preference to dimerization even in an associated state at high concentrations of cinnamate groups, whereas dimerization via intermolecular photocycloaddition was the dominant process in methanol solution and in the film state. Coumarinate groups attached to OEG were photodimerized by UV irradiation, and this process was enhanced in an aqueous solution and in film cast from a polar solvent by hydrophobic association between coumarinate groups, resulting in the production of macromolecules. Kinetic analysis revealed that for low‐concentration aqueous solutions or a film cast from a nonpolar solvent, predominantly circular trimers to tetramers were produced on average, whereas from high‐concentration aqueous solutions or film cast from a polar solvent, mostly cyclic heptamers were produced. These results suggest that the molecular design of nanostructured, cyclic polymers of various sizes is possible by changing the concentration of aqueous solutions and cast solvents in this photoaddition system. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3324–3336, 2005     

Micellar enhanced ultrafiltration of cadmium

The preconcentration of cadmium from aqueous colloid solution containing 8-hydroxyquinoline as extractant, laurylsulphate natrium as surfactant,n-butanol as co-surfactant was performed using micellar ultrafiltration technique. Filters with different pore size and materials were used to achieve a separation from liquid solutions. The cadmium recoveries depending on different conditions (pH, concentration of surfactant) were determined and the results are explained in the terms of colloidal parameters in the compare with the classical solvent extraction.     

Swelling of a polymer brush by a poor solvent

The addition of a small amount of a poor solvent impurity (methanol) to a theta solvent (cyclohexane) is found to cause appreciable swelling (≈30% increase of the average brush height) in a model end‐grafted polystyrene (PS) brush layer. This unusual type of swelling is not observed if octadecyltrichlorosilane (OTS) is first grafted to the portion of the silicon substrate uncovered by the grafting end‐groups of the PS chains. Brush swelling in the absence of OTS surface protection is interpreted as arising from a segregation of methanol to the solid substrate and the resulting modification of the polymer–surface interaction. We also observe that the addition of a small amount of methanol to an adsorbed PS layer exposed to cyclohexane causes rapid film delamination from the silicon substrate. Together these observations imply a strong influence of surface active impurities on the structure and adhesive stability of polymer layers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4126–4131, 2004     

Tuning hydrophobicity of a fluorinated terpolymer in differently assembled thin films

In the current report, casting from good solvent (acetone) and casting from mixed solvent and nonsolvent were employed for preparing thin films of terpolymer of T etrafluoroethylene (TFE), H exafluoropropylene (HFP), and V inylidene fluoride (VDF) (THV), on silicon wafers. These films revealed various morphologies and wetting behaviors depending on the solution concentration, temperature, and thin film preparation method. The THV thin films prepared by casting from good solvent showed smooth morphology with holes. The thin film prepared from a 3 wt % THV/acetone solution by casting from good solvent at 15 °C demonstrated spheres in addition to the smooth morphology, while the thin film prepared from a 5 wt % THV/acetone solution at 15 °C by casting from good solvent had a mesh‐like structure with some linked spheres. Casting the thin films from mixed solvent and nonsolvent resulted in various morphologies such as different sphere sizes embedded in a dense film layer, and hexagonal close packed structures. The thin films prepared by casting from good solvent showed a slightly hydrophobic character, with a measured water contact angle of approximately 99°, while the nonsolvent cast films had a water contact angle as high as 145°. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 643–657     

Formation of homogeneous nanocomposite films at ambient temperature via miniemulsion polymerization using graphene oxide as surfactant

A convenient and industrially scalable method for synthesis of homogeneous nanocomposite films comprising poly(styrene‐stat‐butyl acrylate) and nanodimensional graphene oxide (GO) or reduced GO (rGO) is presented. Importantly, the nanocomposite latex undergoes film formation at ambient temperature, thus alleviating any need for high temperature or high pressure methods such as compression molding. The method entails synthesis of an aqueous nanocomposite latex via miniemulsion copolymerization relying on nanodimensional GO sheets as sole surfactant, followed by ambient temperature film formation resulting in homogeneous film. For comparison, a similar latex obtained by physical mixing of a polymer latex with an aqueous GO dispersion results in severe phase separation, illustrating that the miniemulsion approach using GO as surfactant is key to obtaining homogeneous nanocomposite films. Finally, it is demonstrated that the GO sheets can be readily reduced to rGO in situ by heat treatment of the film. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2289–2297     

Electrostatic interactions of colloidal particles at vanishing ionic strength

Electrostatic interactions of colloidal particles are typically screened by mobile ions in the solvent. We measure the forces between isolated pairs of colloidal polymer microspheres as the density of bulk ions vanishes. The ionic strength is controlled by varying the concentration of surfactant (NaAOT) in a nonpolar solvent (hexadecane). While interactions are well-described by the familiar screened-Coulomb form at high surfactant concentrations, they are experimentally indistinguishable from bare Coulomb interactions at low surfactant concentration. Interactions are strongest just above the critical micelle concentration, where particles can obtain high surface potentials without significant screening, kappaa < 1. Exploiting the absence of significant charge renormalization, we are able to construct a simple thermodynamic model capturing the role of reverse micelles in charging the particle surface. These measurements provide novel access to electrostatic forces in the limit where the particle size is much less than the screening length, which is relevant not just to the nonpolar suspensions described here, but also to aqueous suspensions of nanoparticles.     

Scaling and structural properties of a polymer in a simple solvent: A study based on integral equations

We present a statistical mechanical theory for polymer–solvent systems based on integral equations derived from the polymer Kirkwood hierarchy. Integral equations for pair monomer–monomer, monomer–solvent, and solvent–solvent correlation functions yield polymer–solvent distribution, chain conformation in three dimensions, and scaling properties associated with polymer swell and collapse in athermal, good, and poor solvents. Variation of polymer properties with solvent density and solvent quality is evaluated for chains having up to 100 bonds. In good solvents, the scaling exponent v has a constant value of about 0.61 at different solvent densities computed. For the athermal solvent case, the gyration radius and scaling exponent decrease with solvent density. In a poor solvent, the chain size scales as N^v with the value of the exponent being about 0.3, compared with the mean field value of ⅓. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 3025–3033, 1998     

Fingering phenomena during spreading of surfactant solutions

Fingering instabilities are observed at the contact line of drops of surfactant solutions spreading spontaneously on solid surfaces coated by a film of solvent. The occurrences of instabilities, and the characteristics of the instability pattern, are controlled by the surfactant concentration and the thickness of the film adsorbed or deposited on the substrate. This work provides experimental data as a basis for forthcoming theoretical analyses.     

Selective solvent annealing induced phase separation and dewetting in PMMA/SAN blend ultrathin films

Phase behaviors induced by solvent annealing in poly(methyl methacrylate) (PMMA) and poly(styrene‐ran‐acrylonitrile) (SAN) blend ultrathin films have been investigated by atomic force microscopy and grazing incidence small‐angle X‐ray scattering. Our results indicate that both the phase separation within the blend and the dewetting of the film induced by composition fluctuation take place upon the selective solvent annealing, producing complex structures containing upper droplets (of one phase) and mimic‐films (of the other rich‐phase). The use of acetic acid (the selective solvent for PMMA) generates PMMA mimic‐film and SAN droplets, while the introduction of DMF (exhibiting better solubility for SAN) vapor results in the formation of SAN mimic‐film and PMMA droplets. Essentially, the interaction at polymer/substrate interface, resultant wettability of selected component, solubility of PMMA and SAN in adopted solvent dominate not only the phase separation and the dewetting of the whole film but also the synergism of them. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 1243–1251     

In situ grazing incidence small‐angle X‐ray scattering study of solvent vapor annealing in lamellae‐forming block copolymer thin films: Trade‐off of defects in deswelling

Solvent vapor annealing (SVA) is one route to prepare block copolymer (BCP) thin films with long‐range lateral ordering. The lattice defects in the spin‐coated BCP thin film can be effectively and rapidly reduced using SVA. The solvent evaporation after annealing was shown to have a significant impact on the in‐plane ordering of BCP microdomains. However, the effect of solvent evaporation on the out‐of‐plane defects in BCPs has not been considered. Using grazing‐incidence x‐ray scattering, the morphology evolution of lamellae‐forming poly(2‐vinlypyridine)‐b‐polystyrene‐b‐poly(2vinylpyridine) triblock copolymers, having lamellar microdomains oriented normal to substrate surface during SVA, was studied in this work. A micelle to lamellae transformation was observed during solvent uptake. The influence of solvent swelling ratio and solvent removal rate on both the in‐plane and out‐of‐plane defect density was studied. It shows that there is a trade‐off between the in‐plane and out‐of‐plane defect densities during solvent evaporation. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 980–989     

Environmentally Stable Polymer Gels with Super Deformability and High Recoverability Enhanced by Sub‐5 nm Particles in the Nonvolatile Solvent

It remains challenging to satisfy the combined performances for hydrogels with excellent mechanical behavior, high deformability, and super recoverability under harsh environmental conditions. In this study, we first established a strong polymer network via the crosslinking of polymer chains on the surfaces of sub‐5‐nm calcium hydroxide nanospherulites in ethylene glycol solvent. The organic gel expressed excellent mechanical properties such as a recoverable compressive engineering stress of 249 MPa and an elongation stress of 402 KPa, which was attributed to the uniform nanosized crosslinking structure as characterized by SEM. Moreover, the nonvolatile solvent remained in the gel, meaning that the sample can resist a wide temperature range of ?56 to 100 °C without losing the elastic properties. This novel organic gel could provide promising routes to develop the ideal elastic carriers for wearable devices, smart skin sensors, and damping materials. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 713–721     

The effect of film thickness on the depth‐wise chain orientation of rod‐shaped polyimide

Controlling the chain orientation of polyimide is important because it affects the physical and electrical properties of the film. When a polyimide film is thick, the chain orientation has an inhomogeneous distribution along the thickness direction. In this study, poly(amic acids), the precursor of polyimide, with different coating thicknesses are dried, and the distribution of chain orientation in the thickness direction is investigated by measuring the residual solvent content with Raman spectroscopy. The effect of film thickness on the imidization rate is also studied by measuring the depth‐wise degree of imidization at the curing step. With the final cured polyimide film, the depth‐wise chain orientation is quantified by introducing the Fraser distribution function using polarized Raman spectroscopy. The thicker film has a lower degree of in‐plane orientation of polyimide chains, particularly near the substrate. This distribution of polyimide chain orientation in the thickness direction is similar to that of poly(amic acid) after drying. Fast imidization with higher solvent content for thick polyimide retards the formation of a well‐ordered structure with a high degree of in‐plane orientation. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 848–857     

Semicontinuous seeded cationic emulsion polymerization of styrene: The effects of the concentration and type of cationic surfactant

The objective of this work was to analyze the effects of the concentration and type of cationic surfactant on the kinetic features (instantaneous and overall conversions) and colloidal characteristics [mean particle diameter, particle size distribution (PSD), and surface charge density] in the semicontinuous seeded cationic emulsion polymerization of styrene. 2,2′‐Azobis(N,N′‐dimethyleneisobutyramidine)dihydrochloride was used as an initiator. The surfactants were dodecyltrimethylammonium bromide (DTAB) and hexadecyltrimethylammonium bromide (HDTAB). So that the evolution of some polymeric and colloidal characteristics of the synthesized latices could be followed, the overall and instantaneous conversions were defined and determined gravimetrically. The PSDs and average particle diameters were determined by transmission electron microscopy and photon correlation spectroscopy. The surface charge density was determined by conductimetric titration. The evolution of the instantaneous conversions, the total number of particles, and the PSDs of the different reactions were related to the nucleation, growth, and coagulation processes taking place in the semicontinuous seeded emulsion polymerizations. The PSDs obtained from the reactions carried out with the emulsifier DTAB, at a concentration equal to its critical micelle concentration (cmc) and at a concentration twice its cmc, presented more and smaller particles than those obtained by the addition of HDTAB to the polymerization recipe. At lower emulsifier concentrations equal to half of the cmc, the system had lower colloidal stability with DTAB. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2322–2334, 2003     

Characterization of epoxy–surfactant interactions

We have investigated epoxies based on the diglycidyl ether of bisphenol A (DGEBA) cured with 2-ethyl-4-methylimidazole (EMI-24) in the presence of the nonionic surfactant Triton X-100. A goal was to determine if the viscoelastic properties of the epoxy–surfactant system differed when prepared in bulk form, as opposed to being cast as a thin film on the surface of E-glass cloth. Such a combination of materials has generated great interest for potential use in the construction of laminated circuit boards. Using dynamic mechanical analysis (DMA), differential scanning calorimetry (DSC), transmission electron microscopy (TEM), and atomic force microscopy (AFM), it was determined that the surfactant acts as a plasticizer and is miscible with the epoxy system in concentrations up to 15% by weight. The glass transition temperature (T_g) depression of the epoxy due to the surfactant was accurately described by the Fox equation. DMA master curves were constructed in the frequency domain. The temperature dependence of the shift factors was used to determine the fragility of each of the samples studied. It was found that the fragility (cooperativity) of the epoxy decreased as the concentration of surfactant increased, presumably due to a reduction of intermolecular constraints. The fragility of the combined epoxy–surfactant system increased when cast on the surface of the E-glass cloth. Results for our model epoxy–surfactant resin were in excellent agreement with those obtained using a commercially available aqueous waterborne epoxy resin. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 2781–2792, 1998     

Kinetics of the batch cationic emulsion polymerization of styrene: A comparative study with the anionic case

An in‐depth study on the kinetics of the cationic emulsion polymerization of styrene in a batch reactor is presented. This study is focused on the effect of the amount of the cationic surfactant dodecyltrimethylammonium bromide (DTAB), using two different cationic initiators: 2,2′‐azobisisobutyramidine dihydrochloride (AIBA), 2,2′‐azobis (N,N′‐dimethyleneisobutyramidine) dihydrochloride (ADIBA), on kinetics and colloidal features such as conversion, number of particles, number average of radicals per particle, mean particle diameter, and particle size distribution (PSD) of the polystyrene latices obtained by emulsion polymerization in a batch reactor. Furthermore, the results of the cationic emulsion polymerization were compared with its homologous anionic case. Using DTAB as cationic surfactant an expected increase in the total rate of polymerization was observed when the DTAB concentration increased. However, the total number of particles increased much more than in the anionic system. On the other hand, a dependence on the particle size of the rate of polymerization per particle together with the average number of radicals per particle was found. These differences between cationic and anionic emulsion polymerizations were explained taking into account the limited particle coagulation observed with cationic surfactants, and the high rate of radical formation of cationic initiators. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4461–4478, 2006