Synthesis of 4-substituted 1,4-benzodiazepine-3,5-diones

Synthetic routes leading to the preparation of 4-substituted 1,4-benzodiazepine-3,5-diones are described. Thus, 2-carbobenzoxyaminobenzoic acid was converted to its p-nitrobenzyl ester (I) and the decarbobenzoxylated product (II) gave, with ethyl α-bromoacetate, N-(2-carboxy p-nitrobenzylate)phenylglycine ethyl ester (III). The latter was hydrogenolyzed to N-(2-car-boxy)phenylglycine ethyl ester (IV), which was coupled with benzylamine to give N-(2-carboxy-benzylamido)phenylglycine ethyl ester (VIa). Saponification of VIa afforded N-(2-carboxy-benzylamido)phenylglycine (VIIa) which was cyclized with DCCI to produce 4-benzyl-2H-1,4-benzodiazepine-3,5(lH,4H)dione (VIIIa). Alternatively, 2-nitro-N-phenylbenzamide (Xb) was reduced to 2-amino-N-phenylbenzamide (XIb) which was converted to N-(2-carboxanih'do)-phenylglycine ethyl ester (VIb). The latter was converted to 4-phenyl-2H-1,4-benzodiazepine-3,5(1H,4H)dione (VIIIb) in an analogous fashion described for VIIIa.     

Bimanes (1,5-diazabicyclo[3.3.0]octadienediones): Laser activity in syn-bimanes

The conversion of 3-methyl-4-benzyl-4-chloro-2-pyrazolin-5-one 10b was catalyzed by a mixture of potassium fluoride and alumina to give syn-(methyl, benzyl)bimane 6 (62%) without detectable formation of the anti isomer, A6 [a 1 : 1 mixture (87%) of the isomers 6 and A6 was obtained when the catalyst was potassium carbonate]. In a similar reaction syn-(methyl,carboethoxymethyl)bimane 7 (15%) with the anti isomer A7 (36%) was obtained from 3-methyl-4-carboethoxymethyl-4-chloro-2-pyrazolin-5-one 10c . syn-(Methyl, β-acetoxyethyl)bimane 8 (70%) was obtained from 3-methyl-4-β-acetoxyethyl-4-chloro-2-pyrazolin-5-one 10d (potassium carbonate catalysis) and was converted by hydrolysis to syn-(methyl, β-hydroxyethyl)bimane 9 (40%). Acetyl nitrate (nitric acid in acetic anhydride) converted anti-(amino,hydrogen)bimane 11 to anti-(amino,nitro)bimane 15 (91%), anti-(methyl,hydrogen)bimane 13 to anti-(methyl,nitro)(methyl,hydrogen)bimane 16 (57%), and degraded syn-(methyl,hydrogen)bimane 12 to an intractable mixture. Treatment with trimethyl phosphite converted syn-(bromomethyl,methyl)bimane 17 to syn-(dimethoxyphosphinylmethyl,methyl)bimane 18 (78%) that was further converted to syn-(styryl,methyl)bimane 19 (29%) in a condensation reaction with benzaldehyde. Treatment with acryloyl chloride converted syn-(hydroxymethyl,methyl)bimane 20 to its acrylate ester 21 (22%). Stoichiometric bromination of syn-(methyl,methyl)bimane 1 gave a monobromo derivative that was converted in situ by treatment with potassium acetate to syn-(acetoxymethyl,methyl)(methyl,methyl)bimane 47 . N-Amino-μ-amino-syn-(methylene,methyl)bimane 24 (68%) was obtained from a reaction between the dibromide 17 and hydrazine. Derivatives of the hydrazine 24 included a perchlorate salt and a hydrazone 25 derived from acetone. Dehydrogenation of syn-(tetramethylene)bimane 26 by treatment with dichlorodicyanobenzoquinone (DDQ) gave syn-(benzo,tetramethylene)bimane 27 (58%) and syn-(benzo)bimane 28 (29%). Bromination of the bimane 26 gave a dibromide 29 (92%) that was also converted by treatment with DDQ to syn-(benzo)bimane 28 . Treatment with palladium (10%) on charcoal dehydrogenated 5, 6, 10, 11-tetrahydro-7H,9H-benz [6, 7] indazol [1, 2a]benz[g]indazol-7,9-dione 35 to syn-(α-naphtho)bimane 36 (71%). The bimane 35 was prepared from 1,2,3,4-tetrahydro-1-oxo-2-naphthoate 37 by stepwise treatment with hydrazine to give 1,2,4,5-tetrahydro-3H-benz[g]indazol-3-one 38 , followed by chlorine to give 3a-chloro-2,3a,4,5-tetrahydro-3H-benz[g]indazol-3-one 39 , and base. Dehydrogenation over palladium converted the indazolone 34 to 1H-benz[g] indazol-3-ol 36 . Helicity for the hexacyclic syn-(α-naphtho)bimane 36 was confirmed by an analysis based on molecular modeling. The relative efficiencies (RE) for laser activity in the spectral region 500–530 nm were obtained for 37 syn-bimanes by reference to coumarin 30 (RE 100): RE > 80 for syn-bimanes 3, 5, 18 , and μ-(dicarbomethoxy)methylene-syn-(methylene,methyl)bimane 22 : RE 20–80: for syn-bimanes 1,2,4,20,24,26 , and μ-thia-syn-(methylene,methyl)bimane 50 : and RE 0-20 for 26 syn-bimanes. The bimane dyes tended to be more photostable and more water-soluble than coumarin 30. The diphosphonate 18 in dioxane showed laser activity at 438 nm and in water at 514 nm. Presumably helicity, that was demonstrated by molecular modeling, brought about a low fluorescence intensity for syn-(α-naphtho)bimane 36 , Φ0.1, considerably lower than obtained for syn-(benzo)bimane 28 , Φ0.9.     

Synthesis of carbosilane block copolymers by means of a living anionic polymerization of 1,1-diethylsilacyclobutane

Block polymerization of 1,1-diethylsilacyclobutane with styrene derivatives and methacrylate derivatives was investigated. Sequential addition of styrene to a living poly(1,1-diethylsilabutane), which was prepared from phenyllithium and 1,1-diethylsilacyclobutane in THF–hexane at −48°C, gave poly(1,1-diethylsilabutane)-b-polystyrene. Similarly, addition of 4-(tert-butyldimethylsiloxy)styrene to the living poly(1,1-diethylsilabutane) provided poly(1,1-diethylsilabutane)-b-poly(4-(tert-butyldimethylsiloxy)styrene). Poly(1,1-diethylsilabutane)-b-poly(methyl methacrylate) was obtained by treatment of living poly(1,1-diethylsilabutane) with 1,1-diphenylethylene followed by an addition of methyl methacrylate. Poly(1,1-diethylsilabutane)-b-poly(2-(tert-butyldimethylsiloxy)ethyl methacrylate) was also synthesized by adding 2-(tert-butyldimethylsiloxy)ethyl methacrylate to the living poly(1,1-diethylsilabutane) which was end-capped with 1,1-diphenylethylene in the presence of lithium chloride. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2699–2706, 1998     

Synthesis and characterization of amphiphilic copolymer of linear poly(ethylene oxide) linked with [poly(styrene‐co‐2‐hydroxyethyl methacrylate)‐graft‐poly(ε‐caprolactone)] using sequential controlled polymerization

A well‐defined amphiphilic copolymer of ‐poly(ethylene oxide) (PEO) linked with comb‐shaped [poly(styrene‐co‐2‐hydeoxyethyl methacrylate)‐graft‐poly(ε‐caprolactone)] (PEO‐b‐P(St‐co‐HEMA)‐g‐PCL) was successfully synthesized by combination of reversible addition‐fragmentation chain transfer polymerization (RAFT) with ring‐opening anionic polymerization and coordination–insertion ring‐opening polymerization (ROP). The α‐methoxy poly(ethylene oxide) (mPEO) with ω,3‐benzylsulfanylthiocarbonylsufanylpropionic acid (BSPA) end group (mPEO‐BSPA) was prepared by the reaction of mPEO with 3‐benzylsulfanylthiocarbonylsufanyl propionic acid chloride (BSPAC), and the reaction efficiency was close to 100%; then the mPEO‐BSPA was used as a macro‐RAFT agent for the copolymerization of styrene (St) and 2‐hydroxyethyl methacrylate (HEMA) using 2,2‐azobisisobutyronitrile as initiator. The molecular weight of copolymer PEO‐b‐P(St‐co‐HEMA) increased with the monomer conversion, but the molecular weight distribution was a little wide. The influence of molecular weight of macro‐RAFT agent on the polymerization procedure was discussed. The ROP of ε‐caprolactone was then completed by initiation of hydroxyl groups of the PEO‐b‐P(St‐co‐HEMA) precursors in the presence of stannous octoate (Sn(Oct)₂). Thus, the amphiphilic copolymer of linear PEO linked with comb‐like P(St‐co‐HEMA)‐g‐PCL was obtained. The final and intermediate products were characterized in detail by NMR, GPC, and UV. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 467–476, 2006     

Thermally stable silarylene-1,3,4-oxadiazole polymers

The effects of incorporating a p-phenylene- (or m-phenylene)-1,3,4-oxadiazole fragment into the backbone of poly[1,4-phenylene(diphenylsilyl)-1,4-phenylene-2,5-(1,3,4-oxadiazole)], which was developed by the authors, was investigated. Bis[(p-carbohydrazidophenyl)]diphenylsilane was copolymerized with dipentachlorophenyl terephthalate or isophthalate to produce the prepolymers poly[N-(p-diphenylsilylbenzoyl)-N′N″-(terephthaloyl)-N″′-(p-benzoyl)dihydrazide] and poly[N-(p-diphenylsilylbenzoyl)-N′,-N″-(isophthaloyl)-N″′-p-(benzoyl) dihydrazide], respectively. The polyhydrazides were converted by thermal dehydration into poly[1,4-phenylene(diphenylsilyl)-1,4-phenylene-(1,3,4-oxadiazole-2,5-diyl)-1,4-phenylene-2,5-(1,3,4-oxadiazole)] and poly[1,4-phenyl-ene(diphenylsilyl)-1,4-phenylene-(1,3,4-oxadiazole-2,5-diyl)-1,3,4-(oxadiazole)]. The new polymers were soluble in organic solvents. Films cast from these solutions exhibited good adhesion to glass and metal surfaces. Thermal analysis showed that the heat stability of all these polymers was about the same and that they were resistant to decomposition when heated in air to about 400°C. The results also indicated that these polymers were somewhat less heat-resistant than samples of poly-[1,4-phenylene(diphenylsilyl)-1,4-phenylene-2,5-]1,3,4-(oxadiazole) synthesized from bis(p-carbohydrazidophenyl)diphenylsilane and bis-(p-carbopentachlorophenoxy-phenyl)diphenylsilane.     

Preparation of syndiotacticity-rich high molecular weight poly(vinyl alcohol) microfibrillar fiber by photoinitiated bulk polymerization and saponification

Vinyl pivalate (VPi) was polymerized in bulk by ultraviolet-ray initiation at low temperatures using 2,2′-azobis(2,4-dimethylvaleronitrile) (ADMVN) and 2,2'-azobis(isobutyronitrile) (AIBN) as photoinitiators. High molecular weight (HMW) poly(vinyl pivalate) (PVPi), having a number-average degree of polymerization (P_n) of 13,000–28,000, was obtained at conversions below 30% and converted by saponification to a syndiotacticity-rich HMW poly(vinyl alcohol) (PVA) microfibrillar fiber with P_n of 7300–18,300, syndiotactic diad (S-diad) and triad contents of ∼ 64% and ∼ 39%, respectively, and crystal melting temperature (T_m) of ∼ 249°C. ADMVN gave higher P_n than AIBN. On the other hand, conversion was smaller with the former than with the latter, and it was found that the initiation rate of ADMVN was lower than that of AIBN. P_n of PVA was constant while P_n of the precursor PVPi increased with increasing conversion. The syndiotacticity, T_m and thermal stability of PVA obtained from PVPi were much superior to those of PVA derived from poly(vinyl acetate) prepared under the same polymerization conditions. Polymerization of VPi at lower temperatures gave PVA with higher syndiotacticity. © 1997 John Wiley & Sons, Inc.     

Synthesis of Heterotelechelic Poly(ethylene glycol)-block-poly(succinimide) Possessing Both Acetal and Tert-Butoxycarbonyl-amino Terminals with Narrow Molecular Weight Distribution

A novel heterotelechelic linear block copolymer of poly(ethylene glycol) (PEG) and poly(succinimide) (PSI) possessing both acetal and tert-butoxycarbonyl-amino (Boc-NH) terminals (Acetal-PEG-b-PSI-NH-Boc) with a narrow molecular weight distribution (MWD) was successfully prepared by the nucleophilic attack of triethylamine (TEA) to the poly(β-benzyl L-aspartate) (PBLA) segment of Acetal-PEG-b-PBLA-NH-Boc. Acetal-PEG-b-PBLA-NH-Boc with MWD of 1.07 was prepared by living anionic ring-opening polymerization of β-benzyl L-aspartate N-carboxy-anhydride with α-acetal-ω-amino PEG as a macroinitiator, followed by Boc protection. The subsequent conversion of PBLA segment to PSI was successfully carried out by reacting with the catalytic amount of TEA. The characterization by ¹H NMR, GPC and IR demonstrates that the formation of poly(succinimide) proceeded completely without any remarkable side reactions. Acetal-PEG-b-PSI-NH-Boc thus obtained may have a potential utility as a targetable drug carrier in the field of drug delivery system.     

The synthesis of 1H-benzimidazole derivatives containing a 9H-xanthene or 9H-thioxanthene ring

2-(9H-Xanthen-9-ylmethyl)-1H-benzimidazole ( 2a ) was prepared by condensing 9H-xanthene-9-acetic acid ( 1a ) with 1,2-benzenediamine. Similarly, 2-(9H-thioxanthen-9-ylmethyl)-1H-benzimidazole ( 2b ) and its S,S-dioxide ( 2d ) were obtained. Compound 2d was also prepared by oxidizing 2b with hydrogen peroxide in acetic acid. Heating of 9H-thioxanthene-9-acetic acid 10-oxide ( 1c ) with 1,2-benzenediamine gave 9-methylene-9H-thioxanthene ( 3 ). 2-(9H-Thioxanthen-9-ylmethyl)-1H-benzimidazole S-oxide ( 2c ) was obtained by oxidizing 2b with m-chloroperbenzoic acid in acetone.     

Asymmetric induction copolymerization. Cationic copolymerization of l-menthyl vinyl ether with indene and acenaphthylene

l-Menthyl vinyl ether (l-MVE) was homopolymerized and copolymerized with the monomers indene (IN) and acenaphthylene (ANp) by BF₃OEt₂ as a catalyst. The chiral menthyl substituent was cloven from the homopolymers and copolymers using dry-hydrogen bromide gas. After the removal of optically active menthyl group, poly(vinyl alcohol) (PVA) from l-MVE homopolymer was optically inactive, and copolymers (VA-IN, VA-ANp) from l-MVE-IN and l-MVE-ANp copolymers were still optically active. Hence, in the case of l-MVE homopolymer, it was concluded that asymmetric induction in the polymer main chain can only produce pseudoasymmetry. In the case of l-MVE-IN and l-MVE-ANp copolymers, it was found that asymmetric induction proceeded in the copolymer main chain and was caused by the influence of chiral menthyl group.     

Facile Preparation of (±)-12-Epiprostaglandins from 7-Oxabicyclo[2.2.1]hept-5-en-2-one via an all-cis-formyllactone related to Corey lactone

The bicyclic monoselenoacetal 7 , easily obtained from (±)-7-oxabicyclo[2.2.1]hept-5-en-2-one ( 6 ) via a radical addition-acyl migration sequence, was converted to racemic 12-epiprostaglandins 3 and 4 . The key intermediate was the all-cis-formyllactone 2b related to Corey lactone (see 12 ; Scheme 1). The presence of a (tert-butyl)-dimethylsilyl protective group for the 11-OH substituent (prostaglandin numbering) was found to be crucial in avoidingβ -elimination and epimerization during the Wittig-Horner reaction (Scheme 2). Epimerization at C(12) at the formyllactone stage (see 2b ) was also possible and gave the known precursor 1b of naturally occurring prostaglandins and analogs.     

Synthesis of D- and L-5-Oxaproline and of a New Captopril Analogue

The 1,3-dipolar cycloaddition of the C-t-butyloxycarbonyl-N -mannosyl-nitrone 5 , formed in situ from the partially protected D -mannose-oxime 3 and the glyoxylate 4 , to ethylene gave preferentially the (3S)-N-glycosyl-isoxazolidine 6 which was transformed into the 3-isoxazolidine-carboxylate (L -5-oxaproline ester) 12 and into some derivatives thereof. The (S)-configuration of 12 was proved by chemical correlation with a derivative of L -asparagine. The D -5-oxaproline ester was obtained from the corresponding N-ribosyl-nitrone 24 . Two protected dipeptides containing either C-terminal- ( 28 ) or N-terminal-5-oxaproline (= Opro) ( 30 ) were synthesized. Starting from 12 , the analogue 1 of captopril® ( 2 ) was prepared and its activity as an inhibitor of the angiotensin-converting-enzyme (ACE) was examined.     

Component composition of essential oils from four species of the genus Achillea growing in Kazakhstan

The component composition of the four species Achillea filipendulina, A. sudetica, A. ledebourii, and A. cartilaginea was studied by GC-MS. It was found that the principal components of the essential oil (%) were santolina alcohol (29.1) and borneol (27.9) for A. filipendulina, linalool (11.8) and caryophyllene (8.9) for A. sudetica, germacrene D (20.55) for A. ledebourii, and α-thujone (26.15) and β-thujone (11.76) for A. cartilaginea. The chemical composition of the essential oils from A. sudetica, A. ledebourii, and A. cartilaginea was studied for the first time. __________ Translated from Khimiya Prirodnykh Soedinenii, No. 3, pp. 243–245, May–June, 2006.     

Tetrahydropyridoazepines and tetrahydropyridoazepinones from the corresponding dihydroquinolones

The p-toluenesulfonate of 7,8-dihydro-5(6H)quinoloneoxime( 3 ) was subjected of a Beckmann rearràngement. The resulting 2,3,4,5-tetrahydro-1H-pyrido[3,2-b]azepin-2-one ( 4 ) was reduced with lithium aluminum hydride affording 2,3,4,5-tetrahydro-1H-pyrido[3,2-b] azepine ( 5 ). 5,6-l)ihydro-8(7H)quinolone ( 7 ), obtained by oxidation of 5,6,7,8-tetrahydro-8-quinolinol ( 6 ), was converted into the p-toluenesulfonate of 5,6-dihydro-8(7H)quinolone oxitne ( 9 ). Similarly the latter compound could be rearranged into 2,3,4,5-letrahydro-1H-pyrido [2,3-b] azepin-2-one ( 10 ) which on reduction produced 2,3,4,5-tetrahydro-1H-pyrido [2,3-b] azepine ( 11 ).     

The Total Synthesis and Biological Assessment of trans‐Epothilone A

The total synthesis of (12S,13S)‐trans‐epothilone A ( 1a ) was achieved based on two different convergent strategies. In a first‐generation approach, construction of the C(11) C(12) bond by Pd⁰‐catalyzed Negishi‐type coupling between the C(12)‐to‐C(15) trans‐vinyl iodide 5 and the C(7)‐to‐C(11) alkyl iodide 4 preceded the (nonselective) formation of the C(6) C(7) bond by aldol reaction between the C(7)‐to‐C(15) aldehyde 25 and the dianion derived from the C(1)‐to‐C(6) acid 3 . The lack of selectivity in the aldol step was addressed in a second‐generation approach, which involved construction of the C(6) C(7) bond in a highly diastereoselective fashion through reaction between the acetonide‐protected C(1)‐to‐C(6) diol 31 (‘Schinzer's ketone') and the C(7)‐to‐C(11) aldehyde 30 . As part of this strategy, the C(11) C(12) bond was established subsequent to the critical aldol step and was based on B‐alkyl Suzuki coupling between the C(1)‐to‐C(11) fragment 40 and C(12)‐to‐C(15) trans‐vinyl iodide 5 . Both approaches converged at the stage of the 3‐O, 7‐O‐bis‐TBS‐protected seco acid 27 , which was converted to trans‐deoxyepothilone A ( 2 ) via Yamaguchi macrolactonization and subsequent deprotection. Stereoselective epoxidation of the trans C(12) C(13) bond could be achieved by epoxidation with Oxone ^® in the presence of the catalyst 1,2 : 4,5‐di‐O‐isopropylidene‐L ‐erythro‐2,3‐hexodiuro‐2,6‐pyranose ( 42a ), which provided a 8 : 1 mixture of 1a and its (12R,13R)‐epoxide isomer 1b in 27% yield (54% based on recovered starting material). The absolute configuration of 1a was established by X‐ray crystallography. Compound 1a is at least equipotent with natural epothilone A in its ability to induce tubulin polymerization and to inhibit the growth of human cancer cell lines in vitro. In contrast, the biological activity of 1b is at least two orders of magnitude lower than that of epothilone A or 1a .     

Monodisperse thermosensitive particles prepared by emulsifier-free emulsion polymerization with microwave irradiation

The emulsifier-free emulsion polymerization of styrene (St) and N-isopropylacrylamide (NIPAAm) was successfully carried out with microwave irradiation, and the monodisperse thermoresponsive poly(styrene-co-N-isopropylacrylamide) (poly(St-co-NIPAAm)) particles with diameters in the range 100–130 nm were prepared. The morphology, size and size distribution of the poly(St-co-NIPAAm) particles were characterized by transmission electron microscopy, scanning electron microscopy (SEM) and photon correlation spectroscopy (PCS), respectively. The results showed that poly(St-co-NIPAAm) particles had spherical morphology, and the poly(St-co-NIPAAm) particles prepared by emulsifier-free emulsion polymerization with microwave irradiation were smaller, more uniform than those obtained with conventional heating. The hydrodynamic diameters of poly(St-co-NIPAAm) particles were decreased as the temperature increased from 25 °C to 40 °C, and poly(St-co-NIPAAm) particles collapsed remarkably at 32 °C, which is the lower critical solution temperature of the poly(N-isopropylacrylamide). The morphology of the assembled poly(St-co–NIPAAm) particles was observed by SEM, it was found that monodisperse poly(St-co-NIPAAm) particles could assemble to form the two-dimensional order structures.     

Study on Dual Stimuli-Responsive Supramolecular Diblock Copolymers

In this paper, we report the synthesis and characterization of a new stimuli-responsive diblock polymer, i.e., methoxy poly (ethylene glycol)-block-Poly(N-isopropylacrylamide) (mPEG-b-PNIPAM), which belongs to the family of supramolecular amphiphiles. For this purpose, β-cyclodextrin (β-CD)-functionalized methoxy poly (ethylene glycol) (mPEG-CD) and adamantine (AD)-modified poly(N-isopropylacrylamide) (PNIPAM-AD) were synthesized. The diblock polymer mPEG-b-PNIPAM was then obtained by host–guest inclusion between mPEG-CD and PNIPAM-AD. The structure and molecular weight of the mPEG-b-PNIPAM was confirmed by ¹HNMR and GPC, respectively. Above the lower critical solution temperature (LCST), mPEG-b-PNIPAM can self-assemble into nano-structures in aqueous solutions with PNIPAM block as the core and mPEG block as the corona. The aggregation behavior of mPEG-b-PNIPAM were revealed by UV-vis, DLS measurements, and TEM observations. The mPEG-b-PNIPAM was further utilized to construct Dox@mPEG-b-PNIPAM micelles at 37°C in phosphate-buffered saline (PBS). No detectable amount of Dox was released from the micelles at 37°C. When cooling to 27°C or adding a competitive reagent, however, release of Dox from the micelles was observed.     

Synthesis of 3-(2-Aminoethyl)pyrrole Derivatives

3-(2-Di-n-propylaminoethyl)pyrrole (1a) was prepared in good yield by reduction of pyrrole-3-(N,N-di-n-propylglyoxamide) (9) with lithium aluminum hydride. 3-(2-Di-n-propylaminoethyl)-5-acetylpyrrole (1b) was prepared by first acetylation of 1-p-toluenesulfonyl-3-(2-di-n-propylaminoethyl)pyrrole (6) followed by hydrolysis of the p-toluenesulfonyl substituent. The starting material 6 was prepared by homologation of 1-(p-toluenesulfonyl)pyrrole-3-carboxaldehyde (3) to the corresponding acetaldehyde followed by reductive amination of the latter.     

Synthesis and characterization of novel biodegradable block copolymer poly(ethylene glycol)‐block‐poly(L‐lactide‐co‐2‐methyl‐2‐carboxyl‐propylene carbonate)

An amphiphilic block copolymer, poly(ethylene glycol)‐block‐poly(L ‐lactide‐co‐2‐methyl‐2‐benzoxycarbonyl‐propylene carbonate) [PEG‐b‐P(LA‐co‐MBC)], was synthesized in bulk by the ring‐opening polymerization of L ‐lactide with 2‐methyl‐2‐benzoxycarbonyl‐propylene carbonate (MBC) in the presence of poly(ethylene glycol) as a macroinitiator with diethyl zinc as a catalyst. The subsequent catalytic hydrogenation of PEG‐b‐P(LA‐co‐MBC) with palladium hydroxide on activated charcoal (20%) as a catalyst was carried out to obtain the corresponding linear copolymer poly(ethyleneglycol)‐block‐poly(L ‐lactide‐co‐2‐methyl‐2‐carboxyl‐propylenecarbonate) [PEG‐b‐P(LA‐co‐MCC)] with pendant carboxyl groups. DSC analysis indicated that the glass‐transition temperature (T_g) of PEG‐b‐P(LA‐co‐MBC) decreased with increasing MBC content in the copolymer, and T_g of PEG‐b‐P(LA‐co‐MCC) was higher than that of the corresponding PEG‐b‐P(LA‐co‐MBC). The in vitro degradation rate of PEG‐b‐P(LA‐co‐MCC) in the presence of proteinase K was faster than that of PEG‐b‐P(LA‐co‐MBC), and the cytotoxicity of PEG‐b‐P(LA‐co‐MCC) to chondrocytes from human fetal arthrosis was lower than that of poly(L ‐lactide). © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4771–4780, 2005     

Synthesis and reactions of 2-[3-(trifluoromethyl)phenyl]furo[3,2-<Emphasis Type="Italic">c</Emphasis>]pyridine

(E)-3-{5-[3-(Trifluoromethyl)phenyl]furan-2-yl}propenoic acid (I) was prepared from 5-[3-(tri-fluoromethyl)phenyl]furan-2-carbaldehyde under the Doebner’s conditions. The obtained acid was converted to the corresponding azide II, which was cyclized by heating in diphenyl ether to 2-[3-(trifluoromethyl)phenyl]-4,5-dihydrofuro[3,2-c]pyridin-4-one (III). This compound was aromatized with phosphorus oxychloride to chloroderivative IV which was reduced with H₂NNH₂-Pd/C to the title compound V. 2-[3-(Trifluoromethyl)phenyl]furo[3,2-c]pyridin-5-oxide (VI) was synthesized by reaction of V with 3-chloroperoxybenzoic acid in dichloromethane. On treatment of VI with benzoyl chloride and potassium cyanide (Reissert-Henze reaction), corresponding 2-[3-(trifluoromethyl)phenyl]furo[3,2-c]pyridine-1-carbonitrile (VII) resulted. 5-Amino-2-[3-(trifluoromethyl)phenyl]furo[3,2-c]pyridin-5-ium-4-methylbenzene sulfonate (VIII) was prepared by direct N-amination of the title compound V with 1-[(aminooxy)sulfonyl]-4-methylbenzene in dichloromethane. Then, VIII was transformed to a non-isolated zwitterionic N-imid IX which afforded the corresponding furo[3,2-c]pyrazolo[1,5-a]pyridine carboxylic acid esters X, XI by 1,3-dipolar cycloaddition reactions with dimethyl but-2-ynedionate (DBD) or ethyl propiolate. The structures of all compounds were confirmed by their IR and NMR spectra. Presented at the 1st International Conference “Applied Natural Sciences” on the occasion of 10th anniversary of the University of St. Cyril and Methodius, Trnava, 7–9 November 2007.     

Synthesis of 3,3′-(1,6-hexanediyl)bis-pyrimidine derivatives and 3,4-dithia[6.6](1.3)pyrimidinophane

Several 3,3′-(1,6-hexanediyl)bis[6-methyl-2,4(1H,3H)-pyrimidinedione] derivatives ( 4a, 4b , and 4c ) were synthesized from 1,6-(hexanediyl)bis[6-methyl-2H-1,3-oxazine-2,4(3H)-dione] (3) . Compound 4c was converted to 6, which reacted with thiourea giving thiuronium salt 7 . 3,3′-(1,6-Hexanediyl)bis [1-(2-mercaptoethyl)-6-methyl-2,4(1H,3H)-pyrimidinedione] (9) was obtained by the hydrolysis of 7 , and then 9 was oxidized to 12,22-dimethyl-3,4-dithia[6.6] (1.3)-1,2,3,4-tetrahydro-2,4-dioxopyrimidinophane (10) .