Rylene diimide and dithienocyanovinylene copolymers for polymer solar cells

Two polymers containing(E)-2,3-bis(thiophen-2-yl)acrylonitrile(CNTVT) as a donor unit, perylene diimide(PDI) or naphthalene diimide(NDI) as an acceptor unit, are synthesized by the Stille coupling copolymerization, and used as the electron acceptors in the solution-processed organic solar cells(OSCs). Both polymers exhibit broad absorption in the region of 300–850 nm. The LUMO energy levels of the resulted polymers are ca. –3.93 eV and the HOMO energy levels are –5.97 and –5.83 eV. In the binary blend OSCs with PTB7-Th as a donor, PDI polymer yields the power conversion efficiency(PCE) of up to 1.74%, while NDI polymer yields PCE of up to 3.80%.     

Side chain engineering of naphthalene diimide–bithiophene‐based polymer acceptors in all‐polymer solar cells

Two novel polymeric acceptors based on naphthalene diimide (NDI) and 2.2′‐bithiophene, named as P(NDI2THD‐T2) and P(NDI2TOD‐T2), were designed and synthesized for all polymer solar cells application. The structural and electronic properties of the two acceptors were modulated through side‐chain engineering of the NDI units. The optoelectronic properties of the polymers and the morphologies of the blend films composed of the polymer acceptors and a donor polymer PTB7‐Th were systemically investigated. With thiophene groups introduced into the side chains of the NDI units, both polymers showed wider absorption from 350 nm to 900 nm, compared with the reference polymer acceptor of N2200. No redshift of absorption spectra from solutions to films indicated reduced aggregation of the polymers due to the steric hindrance effect of thiophene rings in the side chains. The photovoltaic performance were characterized for devices in a configuration of ITO/PEDOT:PSS/PTB7‐Th:acceptors/2,9‐bis(3‐(dimethylamino)propyl)anthra[2,1,9‐def:6,5,10‐def]diisoquinoline‐1,3,8,10(2H,9H)‐tetraone (PDIN)/Al. With the addition of diphenyl ether as an additive, the power conversion efficiencies (PCEs) of 2.73% and 4.75% for P(NDI2THD‐T2) and P(NDI2TOD‐T2) based devices were achieved, respectively. The latter showed improved J_sc, Fill Factor (FF), and PCE compared with N2200 based devices. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3679–3689     

n‐Type Conjugated Polymer Based on Dicyanodistyrylbenzene and Naphthalene Diimide Units for All‐Polymer Solar Cells

All polymer solar cells (all‐PSCs), possessing superior mechanical strength and flexibility, offer the commercialization opportunity of the PSCs for flexible and portable devices. In this work, we designed and synthesized two copolymer acceptors based on dicyanodistyrylbenzene (DCB) and naphthalene diimide (NDI) units. The corresponding copolymer acceptors are denoted as PDCB‐NDI812 and PDCB‐NDI1014. The medium band gap copolymer PBDB‐T was selected as donor material for investigation of the photovoltaic performance. Two all‐PSCs devices showed power conversion efficiencies (PCE) of 4.26% and 3.43% for PDCB‐NDI812 and PDCB‐NDI1014, respectively. The improved PCE was ascribed to the higher short‐circuit current (J_SC), greater charge carrier mobility and higher exciton dissociation probability of the PBDB‐T:PDCB‐NDI812 blend film. These results suggest that DCB unit and NDI unit based copolymer acceptors are promising candidates for high performance all‐PSCs.     

Synthesis and characterization of arylenevinylenearylene–naphthalene diimide copolymers as acceptor in all–polymer solar cells

Two n‐type conjugated D‐A copolymers, P(TVT‐NDI) and P(FVF‐NDI) with thienylene‐vinylene‐thienylene (TVT) or furanylene‐vinylene‐furanylene (FVF) as donor (D) units and naphthalene diimide (NDI) as the acceptor (A) units, were synthesized by the Stille coupling copolymerization. The two polymers possess good solubility, high thermal stability, and broad absorption bands with absorption edges at 866 nm for P(TVT‐NDI) and 886 nm for P(FVF‐NDI) . The LUMO energy levels of P(TVT‐NDI) and P(FVF‐NDI) are ?3.80 eV and ?3.76 eV respectively, so the two polymers are suitable for the application as acceptor in blending with most polymer donor in PSCs based on the energy level matching point of view. All polymer solar cells (all‐PSCs) were fabricated with P(TVT‐NDI) or P(FVF‐NDI) as acceptor and medium bandgap polymer J51 as donor for investigating the photovoltaic performance of the two n‐type conjugated polymer acceptors. And higher power conversion efficiency of 6.43% for P(TVT‐NDI) and 5.21% for P(FVF‐NDI) was obtained. The results indicate that arylenevinylenearylene–naphthalene diimide copolymer are promising polymer acceptor for all–PSCs. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 1757–1764     

A new polymer acceptor containing naphthalene diimide and 1,3,4‐thiadiazole for all‐polymer solar cells

A n‐type conjugated polymer containing naphthalene diimide (NDI) and 1,3,4‐thiadiazole (TZ) moieties, named PNTZ, has been synthesized and applied for all‐polymer solar cells (all‐PSCs). By the incorporation of TZ unit into the polymer main chains, the lowest unoccupied molecular orbital level of this polymer has been adjusted effectively. In addition, the electron‐acceptor PNTZ shows a broad absorption spectrum in the range of 300–700 nm, and possesses complementary absorption spectrum with the electron‐donor PTB7‐Th. On the basis of PNTZ as the acceptor and PTB7‐Th as the donor, the all‐PSCs are fabricated. After optimization, the well blend morphologies with a continuous D/A interpenetrating network are observed and the best all‐PSC device exhibits a power conversion efficiency of 4.35% with a high short‐circuit current density of 13.26 mA cm^?2. This research demonstrates that the TZ‐containing polymer PNTZ is a promising non‐fullerene acceptor for high efficiency all‐PSCs. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55 , 990–996     

One donor–two acceptor (D–A1)‐(D–A2) random terpolymers containing perylene diimide,naphthalene diimide,and carbazole units

A series of one donor–two acceptor (D–A₁)‐(D–A₂) random terpolymers containing a 2,7‐carbazole donor and varying compositions of perylene diimide (PDI) and naphthalene diimide (NDI) acceptors was synthesized via Suzuki coupling polymerization. The optical properties of the terpolymers are weighted sums of the constituent parent copolymers and all show strong absorption over the 400 to 700 nm range with optical bandgaps ranging from 1.77 to 1.87 eV, depending on acceptor composition. The copolymers were tested as acceptor materials in bulk heterojunction all‐polymer solar cells using poly[(4,8‐bis‐(2‐ethylhexyloxy)‐benzo[1,2‐b;4,5‐b′]dithiophene)‐2,6‐diyl‐alt‐(4‐(2‐ethylhexanoyl)‐thieno[3,4‐b]thiophene)‐2,6‐diyl] (PBDTTT‐C) as the donor material. In contrast to the optoelectronic properties, the measured device parameters are not composition dependent, and rather depend solely on the presence of the NDI unit, where the devices containing any amount of NDI perform half as well as those using the parent polymer containing only carbazole and PDI. Overall this is the first example of a one donor–two acceptor random terpolymer system containing perylene diimide (PDI) and naphthalene diimide (NDI) acceptor units, and demonstrates a facile method of tuning polymer optoelectronic properties while minimizing the need for complicated synthetic and purification steps. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3337–3345     

非富勒烯聚合物太阳电池研究进展

综述了以p-型共轭聚合物为给体、n-型有机半导体为受体的非富勒烯聚合物太阳电池光伏材料最新研究进展,包括n-型共轭聚合物和可溶液加工小分子n-型有机半导体(n-OS)受体光伏材料,以及与之匹配的p-型共轭聚合物给体光伏材料.介绍的n-型共轭聚合物受体光伏材料包括基于苝酰亚胺(BDI)、萘酰亚胺(NDI)以及新型硼氮键连受体单元的D-A共聚物受体光伏材料,目前基于聚合物给体(J51)和聚合物受体(N2200)的全聚合物太阳电池的能量转换效率最高达到8.26%.n-OS小分子受体光伏材料包括基于BDI和NDI单元的有机分子、基于稠环中心给体单元的A-D-A型窄带隙有机小分子受体材料等.给体光伏材料包括基于齐聚噻吩和苯并二噻吩(BDT)给体单元的D-A共聚物,重点介绍与窄带隙A-D-A结构小分子受体吸收互补的、基于噻吩取代BDT单元的中间带隙二维共轭聚合物给体光伏材料.使用中间带隙的p-型共轭聚合物为给体、窄带隙A-D-A结构有机小分子为受体的非富勒烯聚合物太阳电池能量转换效率已经突破12%,展示了光明的前景.最后对非富勒烯聚合物太阳电池将来的发展进行了展望.     

Dye‐Incorporated Polynaphthalenediimide Acceptor for Additive‐Free High‐Performance All‐Polymer Solar Cells

All‐polymer solar cells (all‐PSCs) can offer unique advantages for applications in flexible devices, and naphthalene diimide (NDI)‐based polymer acceptors are the widely used polymer acceptors. However, their power conversion efficiency (PCE) still lags behind that of state‐of‐the‐art polymer solar cells, due to low light absorption, suboptimal energy levels and the strong aggregation of the NDI‐based polymer acceptor. Herein, a rhodanine‐based dye molecule was introduced into the NDI‐based polymer acceptor by simple random copolymerization and showed an improved light absorption coefficient, an up‐shifted lowest unoccupied molecular orbital level and reduced crystallization. Consequently, additive‐free all‐PSCs demonstrated a high PCE of 8.13 %, which is one of the highest performance characteristics reported for all‐PSCs to date. These results indicate that incorporating a dye into the n‐type polymer gives insight into the precise design of high‐performance polymer acceptors for all‐PSCs.     

Perylene Diimide Hexamer Based on Combination of Direct and Indirect Linkage Manners for Non-fullerene Organic Solar Cells

Perylene diimide (PDI) is one of the most intensively studied building blocks for the construction of non-fullerene acceptors (NFAs). In this contribution, based on combination of the direct and indirect linkage manners of PDI units at the bay position, a propeller-shaped PDI hexamer T-DPDI was designed and synthesized. The singly bonded PDI dimer DPDI and the benzene ring cored PDI trimer TPDI were synthesized for comparison. The photovoltaic performances of these three PDI derivatives were investigated using the commercially available PTB7-Th as electron donor. A best power conversion efficiency (PCE) of 6.58% was obtained for T-DPDI based organic solar cells (OSCs), which is higher than those of DPDI and TPDI based ones. The superior photovoltaic performance of T-DPDI can be ascribed to its stronger absorption and more favorable morphology. This study presents an interesting example of improving the photovoltaic performances of PDI based NFAs by hybridizing the direct and indirect linkage manners.     

Recent advances in rylene diimide polymer acceptors for all-polymer solar cells

In recent years, a large library of n-type polymers have been developed and widely used as acceptor materials to replace fullerene derivatives in polymer solar cells(PSCs), stimulating the rapid expansion of research on so-called all-polymer solar cells(a PSCs). In particular, rylene diimide-based n-type polymer acceptors have attracted broad research interest due to their high electron mobility, suitable energy levels, and strong light-harvesting ability in the visible region. Among various polymer acceptors, rylene diimide-based polymers presented best performances when served as the acceptor materials in a PSCs. Typically, a record power conversion efficiency(PCE) of 7.7% was very recently achieved from an a PSC with a rylene diimide polymer derivative as the acceptor component. In this review, we highlight recent progress of n-type polymers originated from two significant classes of rylene diimide units, namely naphthalene diimide(NDI) and perylene diimide(PDI), as well as their derivatives for a PSC applications.     

Dimeric naphthalene diimide based small molecule acceptors: synthesis,characterization, and photovoltaic properties

Herein, we present two naphthalene diimide (NDI) dimer based small molecule acceptors, Bis-NDI-T-EG and Bis-NDI-BDT-EG, in which two NDI units are bridged, respectively, by a thiophene (T) or a benzodithiophene (BDT), and further symmetrically substituted by 2-methoxylethoxyl (EG), both through the bay-region. These two NDI dimers exhibit broad absorption in the visible region of 300–650 (800) nm and display a HOMO/LUMO energy level of −5.88 eV/−3.80 eV and −5.46 eV/−3.78 eV, respectively. When PBDTTT-C-T was chosen as the polymer donor, Bis-NDI-T-EG and Bis-NDI-BDT-EG exhibited efficiencies of 1.31% and 1.24%, respectively.     

基于侧链不对称喹喔啉聚合物的高效非富勒烯太阳电池

喹喔啉衍生物由于合成简单,易功能化,成本较低等特点在众多领域都有广泛应用。其自身具有平面刚性结构,也是构建光电聚合物的重要单体。基于喹喔啉单元的有机分子化学结构和电子结构可修饰性强,通过骨架、侧链和取代基等修饰,易于调控分子的能级和吸光光谱,因此,当使用喹喔啉体系的共轭给体与球形富勒烯受体(如PCBM)及弱结晶性非富勒烯受体(如ITIC)均可表现出优异的光伏性能。在本工作中,基于结晶性较强的非富勒烯受体(o-IDTBR),我们首次制备出侧链不对称喹喔啉(简称：不对称喹喔啉)基聚合物(TPQ-1)与之匹配。相比于侧链对称性喹喔啉(简称：对称喹喔啉)(HFQx-T)与o-IDTBR组合,“弱结晶给体-强结晶受体”组合能表现出更佳均匀的相分离尺度,从而获得更高的短路电流及能量转换效率。TPQ-1与o-IDTBR共混后器件效率为8.6%,加入15%的TB7-Th后,器件效率达到9.6%。     

Tuning the frontier molecular orbital energy levels of n‐type conjugated copolymers by using angular‐shaped naphthalene tetracarboxylic diimides,and their use in all‐polymer solar cells with high open‐circuit voltages

An angular‐shaped naphthalene tetracarboxylic diimide (NDI) was designed and synthesized as a new building block for n‐type conjugated polymers to tune their energy levels. Three n‐type copolymers incorporating this angular‐shaped NDI as the acceptor moiety were obtained by Stille coupling reactions and had number average molecular weights of 18.7–73.0 kDa. All‐polymer bulk‐heterojunction solar cells made from blends of these polymers with poly(3‐hexylthiophene) gave a power conversion efficiency up to 0.32% and exhibited an open‐circuit voltage (V_oc) up to 0.94 V due to their relative high‐lying lowest unoccupied molecular orbital energy levels. The high V_oc of 0.94 V is higher than that of solar cells based on linear‐shaped NDI‐containing polymers (<0.6 V). The results indicate that the angular‐shaped NDI is a promising building block for constructing nonfullerene polymer acceptors for solar cells with high open‐circuit voltages. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

An Electron‐Deficient Building Block Based on the B←N Unit: An Electron Acceptor for All‐Polymer Solar Cells

A double B←N bridged bipyridyl (BNBP) is a novel electron‐deficient building block for polymer electron acceptors in all‐polymer solar cells. The B←N bridging units endow BNBP with fixed planar configuration and low‐lying LUMO/HOMO energy levels. As a result, the polymer based on BNBP units (P‐BNBP‐T) exhibits high electron mobility, low‐lying LUMO/HOMO energy levels, and strong absorbance in the visible region, which is desirable for polymer electron acceptors. Preliminary all‐polymer solar cell (all‐PSC) devices with P‐BNBP‐T as the electron acceptor and PTB7 as the electron donor exhibit a power conversion efficiency (PCE) of 3.38 %, which is among the highest values of all‐PSCs with PTB7 as the electron donor.     

Synthesis and Absorption Spectra of n‐Type Conjugated Polymers Based on Perylene Diimide

Two novel n‐type conjugated polymers based on perylene diimide (PDI), poly(PDI‐vinylene) (PDIV), and poly(PDI‐thienylene) (PDITh), have been designed and synthesized by the Stille coupling reaction. In comparison with the PDI monomer (compound M1), PDIV and PDITh films show a significantly broad absorption band from 380 to 720 nm, and a narrower bandgap of ≈1.71 and 1.74 eV, respectively. Cyclic voltammograms of the two polymers display a couple of reversible reduction/re‐oxidation (n‐doping/dedoping) peaks. The onset reduction (n‐doping) potentials of PDIV and PDITh are at −0.62 V and −0.66 V versus Ag/Ag⁺ respectively, which correspond to the electron affinities (EAs) of 4.09 eV for PDIV and 4.05 eV for PDITh. The EA values of the two polymers are the highest among the n‐type conjugated polymers reported to date. The results indicate that PDIV and PDITh could be used as polymer acceptors in all polymer solar cells.

     

Constructing a Strongly Absorbing Low‐Bandgap Polymer Acceptor for High‐Performance All‐Polymer Solar Cells

All‐polymer solar cells (all‐PSCs) offer unique morphology stability for the application as flexible devices, but the lack of high‐performance polymer acceptors limits their power conversion efficiency (PCE) to a value lower than those of the PSCs based on fullerene derivative or organic small molecule acceptors. We herein demonstrate a strategy to synthesize a high‐performance polymer acceptor PZ1 by embedding an acceptor–donor–acceptor building block into the polymer main chain. PZ1 possesses broad absorption with a low band gap of 1.55 eV and high absorption coefficient (1.3×10⁵ cm⁻¹). The all‐PSCs with the wide‐band‐gap polymer PBDB‐T as donor and PZ1 as acceptor showed a record‐high PCE of 9.19 % for the all‐PSCs. The success of our polymerization strategy can provide a new way to develop efficient polymer acceptors for all‐PSCs.     

Synthesis and characterization of fused‐thiophene containing naphthalene diimide n‐type copolymers for organic thin film transistor and all‐polymer solar cell applications

Naphthalene diimide copolymers are attractive n‐type materials due to their high electron affinities, high electron mobilities, and exceptional stability. Herein, we report a series of NDI‐fused‐thiophene based copolymers with each copolymer differing in the number of fused thiophenes in the donor monomer. Increasing the number of fused‐thiophene moieties within an NDI‐copolymer backbone is shown to not only enable tuning of the electronic structure but also improve charge mobilities within the active layer of organic field‐effect transistors. Electron mobilities and on/off ratios as high as 0.012 cm² V^?1 s^‐1 and I_on/I_off > 10⁵ were measured from n‐channel thin‐film transistors fabricated using NDI‐xfTh copolymers. Bulk heterojunction solar cell devices were also fabricated from the NDI‐xfTh copolymer series in blends with poly(3‐hexylthiophene) (P3HT) with PNDI‐4fTh ‐ based devices yielding the largest J_sc (0.57 mA cm^?2) and fill factor (55%) in addition to the highest measured PCE for this series (0.13%). © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4061–4069     

A chlorinated polymer promoted analogue co-donors for efficient ternary all-polymer solar cells

The efficient ternary all-polymer solar cells(PSCs) are designed and fabricated, using a polymer acceptor of NDP-V-C7 and analogue co-donors containing a chlorinated polymer PBCl T and classical PTB7-Th. PBCl T and PTB7-Th possess very similar chemical structure and matched energy levels to form the cascade of the co-donors. Meanwhile, benefiting from those analogous polymer structures, there is little influence of the morphology in blend film compared to their pristine polymer films. The binary PBCl T:NDP-V-C7 devices exhibit a high open-circuit voltage(V_(oc)) due to the deep HOMO level of PBCl T. The V_(oc)of all-PSCs could be finely manipulated by adjusting the content of PBCl T in blend film. The ternary all-PSCs have the more balanced charge mobility and prolonged carrier lifetime compared to the binary devices. The PBCl T also help improve the miscibility of ternary blend and suppress crystallization in films, bringing about favorable morphology with appropriate orientation and surface roughness in blend film. With the optimal processing, the champion ternary all-PSCs obtain a high PCE of 9.03%, which is about 10% enhancement compared to that of binary device. The results indicate that the ternary approach using analogue co-donors is a practical method to enhance the performance of all-PSCs.     

Effects of Bithiophene Imide Fusion on the Device Performance of Organic Thin‐Film Transistors and All‐Polymer Solar Cells

Two new bithiophene imide (BTI)‐based n‐type polymers were synthesized. f‐BTI2‐FT based on a fused BTI dimer showed a smaller band gap, a lower LUMO, and higher crystallinity than s‐BTI2‐FT containing a BTI dimer connected through a single bond. s‐BTI2‐FT exhibited a remarkable electron mobility of 0.82 cm² V⁻¹ s⁻¹, and f‐BTI2‐FT showed a further improved mobility of 1.13 cm² V⁻¹ s⁻¹ in transistors. When blended with the polymer donor PTB7‐Th, f‐BTI2‐FT‐based all‐polymer solar cells (all‐PSCs) attained a PCE of 6.85 %, the highest value for an all‐PSC not based on naphthalene (or perylene) diimide polymer acceptors. However, s‐BTI2‐FT all‐PSCs showed nearly no photovoltaic effect. The results demonstrate that f‐BTI2‐FT is one of most promising n‐type polymers and that ring fusion offers an effective approach for designing polymers with improved electrical properties.     

Synthesis and characterization of donor–bridge–acceptor alternating copolymers containing perylene diimide units and their application to photovoltaic cells

We have used Suzuki coupling to prepare a series of alternating copolymers featuring coplanar cyclopentadithiophene and hole‐transporting carbazole units. We observed quenching in the photoluminescence spectra of our polymers after incorporating pendent electron‐deficient perylene diimide ( PDI ) moieties on the side chains, indicating more efficient photoinduced electron transfer. Electrochemical measurements revealed that the PDI ‐containing copolymers displayed reasonable and sufficient offsets of the energy levels of their lowest unoccupied molecular orbitals for efficient charge dissociation. The performance of bulk heterojunction photovoltaic cells incorporating the copolymer/[6,6]‐phenyl‐C₆₁‐butyric acid methyl ester blends (1:4, w/w) was optimized when the active layer had a thickness of 70 nm. The photocurrents of the devices were enhanced as a result of the presence of the PDI moieties, thereby leading to improved power conversion efficiencies. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1298–1309, 2010