Eutectic mixtures as a green alternative for efficient catalyst recycling in atom transfer radical polymerizations

A new solvent mixture, based on ethanol/reline (EM: eutectic mixture), was investigated for the supplemental activator and reducing agent atom transfer radical polymerization (SARA ATRP) of methyl acrylate (MA) near room temperature, for the first time, affording complete catalyst recovery and reuse. The kinetic results revealed that the polymerizations were controlled, with polymers having narrow molecular weight distributions (? < 1.2). The “living” character of the resultant PMA was confirmed by the synthesis of a well‐defined PMA‐b‐PBA block copolymer. Remarkably, it was demonstrated that the Cu(0)/CuBr₂/Me₆TREN (Me₆TREN: tris[2‐(dimethylamino)ethyl]amine) could be recovered from the final reaction mixture and reused for new successful SARA ATRP of MA, suggesting that the reported system could be very attractive from both the economic and environmental perspectives. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 371–381     

Copper(0)‐mediated living radical polymerization of acrylonitrile: SET‐LRP or AGET‐ATRP

Cu(0)‐mediated living radical polymerization was first extended to acrylonitrile (AN) to synthesize polyacrylonitrile with a high molecular weight and a low polydispersity index. This was achieved by using Cu(0)/hexamethylated tris(2‐aminoethyl)amine (Me₆‐TREN) as the catalyst, 2‐bromopropionitrile as the initiator, and dimethyl sulfoxide (DMSO) as the solvent. The reaction was performed under mild reaction conditions at ambient temperature and thus biradical termination reaction was low. The rapid and extensive disproportionation of Cu(I)Br/Me₆‐TREN in DMSO/AN supports a mechanism consistent with a single electron transfer‐living radical polymerization (SET‐LRP) rather than activators generated by electron transfer atom transfer radical polymerization (AGET ATRP). ¹H NMR analysis and chain extension experiment confirm the high chain‐end functionality of the resultant polymer. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Ambient temperature rapid ATRP of methyl acrylate, methyl methacrylate and styrene in polar solvents with mixed transition metal catalyst system

Ambient temperature atom transfer radical polymerization (ATRP) of methyl acrylate (MA), methyl methacrylate (MMA) and styrene (Sty) in the presence of polar solvents (dimethyl sulfoxide: DMSO, dimethylformamide: DMF and acetonitrile: MeCN) with a mixed transition metal catalyst system (Fe(0) as initial activator and CuBr₂/Me₆TREN complex as deactivator) provides a rapid synthesis of polymers with very low polydispersity (PDI) values and predetermined molecular weights. The polymethylacrylate (PMA) prepared using this novel approach contains the Br-terminated chain ends (functionality ∼100%) and can be successfully used for block copolymer synthesis (as demonstrated on the chain extension experiment performed using the PMA–Br macroinitiator). The key elementary reactions involved in this novel ATRP system and some preliminary mechanistic aspects of the process are also discussed.     

Catalytic effect of dimethyl sulfoxide in the Cu(0)/tris(2‐dimethylaminoethyl)amine‐catalyzed living radical polymerization of methyl methacrylate at 0–90 °C initiated with CH3CHClI as a model compound for α,ω‐di(iodo)poly(vinyl chloride) chain ends

A variety of conditions, including catalysts [CuCl, CuI, Cu₂O, and Cu(0)], ligands [2,2′‐bipyridine (bpy), tris(2‐dimethylaminoethyl)amine (Me₆‐TREN), polyethyleneimine, and hexamethyl triethylenetetramine], initiators [CH₃CHClI, CH₂I₂, CHI₃, and F(CF₂)₈I], solvents [diphenyl ether, toluene, tetrahydrofuran, dimethyl sulfoxide (DMSO), dimethylformamide, ethylene carbonate, dimethylacetamide, and cyclohexanone], and temperatures [90, 25, and 0 °C] were studied to assess previous methods for poly(methyl methacrylate)‐b‐poly(vinyl chloride)‐b‐poly(methyl methacrylate) (PMMA‐b‐PVC‐b‐PMMA) synthesis by the living radical block copolymerization of methyl methacrylate (MMA) initiated with α,ω‐di(iodo)poly(vinyl chloride). CH₃CHClI was used as a model for α,ω‐di(iodo)poly(vinyl chloride) employed as a macroinitiator in the living radical block copolymerization of MMA. Two groups of methods evolved. The first involved CuCl/bpy or Me₆‐TREN at 90 °C, whereas the second involved Cu(0)/Me₆‐TREN in DMSO at 25 or 0 °C. Related ligands were used in both methods. The highest initiator efficiency and rate of polymerization were obtained with Cu(0)/Me₆‐TREN in DMSO at 25 °C. This demonstrated that the ultrafast block copolymerization reported previously is the most efficient with respect to the rate of polymerization and precision of the PMMA‐b‐PVC‐b‐PMMA architecture. Moreover, Cu(0)/Me₆‐TREN‐catalyzed polymerization exhibits an external first order of reaction in DMSO, and so this solvent has a catalytic effect in this living radical polymerization (LRP). This polymerization can be performed between 90 and 0 °C and provides access to controlled poly(methyl methacrylate) tacticity by LRP and block copolymerization. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1935–1947, 2005     

Synthesis of poly(methyl methacrylate) via ARGET ATRP and study of the effect of solvents and temperatures on its polymerization kinetics

This investigation reports the synthesis of poly(methyl methacrylate) via activators regenerated by electron transfer atom transfer radical polymerization (ARGET ATRP) and studies the effect of solvents and temperature on its polymerization kinetics. ARGET ATRP of methyl methacrylate (MMA) was carried out in different solvents and at different temperatures using CuBr₂ as catalyst in combination with N,N,N′,N″,N″‐pentamethyldiethylenetriamine as a ligand. Methyl 2‐chloro propionate was used as ATRP initiator and ascorbic acid was used as a reducing agent in the ARGET ATRP of MMA. The conversion was measured gravimetrically. The semilogarithmic plot of monomer conversion versus time was found to be linear, indicating that the polymerization follows first‐order kinetics. The linear polymerization kinetic plot also indicates the controlled nature of the polymerization. N,N‐Dimethylformamide (DMF), tetrahydrofuran (THF), toluene, and methyl ethyl ketone were used as solvents to study the effect on the polymerization kinetics. The effect of temperature on the kinetics of the polymerization was also studied at various temperatures. It has been observed that polymerization followed first‐order kinetics in every case. The rate of polymerization was found to be highest (k_app = 6.94 × 10⁻³ min⁻¹) at a fixed temperature when DMF was used as solvent. Activation energies for ARGET ATRP of MMA were also calculated using the Arrhenius equation.     

Synthesis of double hydrophilic poly(ethylene oxide)‐b‐poly(2‐hydroxyethyl acrylate) by single‐electron transfer–living radical polymerization

In this study, the polymerization of (2‐hydroxyethyl) acrylate (HEA), in polar media, using Cu(0)‐mediated radical polymerization also called single‐electron transfer–living radical polymerization (SET‐LRP) is reported. The kinetics aspects of both the homopolymerization and the copolymerization from a poly(ethylene oxide) (PEO) macroinitiator were analyzed by ¹H NMR. The effects of both the ligand and the solvent were studied. The polymerization was shown to reach very high monomer conversions and to proceed in a well‐controlled fashion in the presence of tris[2‐(dimethylamino)ethyl]amine Me6‐TREN and N, N,N′, N″, N″‐pentamethyldiethylenetriamine (PMDETA) in dimethylsulfoxide (DMSO). SET‐LRP of HEA was also led in water, and it was shown to be faster than in DMSO. In pure water, Me₆‐TREN allowed a better control over the molar masses and polydispersity indices than PMDETA and TREN. Double hydrophilic PEO‐b‐PHEA block copolymers, exhibiting various PHEA block lengths up to 100 HEA units, were synthesized, in the same manner, from a bromide‐terminated PEO macroinitiator. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

A comparative analysis of SET‐LRP of MA in solvents mediating different degrees of disproportionation of Cu(I)Br

Cu(I)Br/Me₆‐TREN species are unstable and disproportionate into metallic Cu(0) and Cu(II)Br₂/Me₆‐TREN in DMSO, whereas in toluene are stable and do not undergo disproportionation, at least at 25 °C. To estimate the role of the disproportionating solvent in single electron‐transfer living radical polymerization (SET‐LRP) a comparative analysis of Cu(0)/Me₆‐TREN‐catalyzed polymerization of MA initiated with methyl 2‐bromopropionate at 25 °C was performed in DMSO and toluene. A combination of kinetic experiments and chain end analysis by 500‐MHz ¹H NMR spectroscopy was used to demonstrate that disproportionation represents the crucial requirement for a successful SET‐LRP of MA at 25 °C. In DMSO a perfect SET‐LRP occurs and yields close to 100% conversion in 45 min. A first order polymerization in growing species up to 100% conversion and a PMA with perfectly functional chain ends are obtained. However, in toluene within 17 h only about 60% conversion is obtained, the polymerization does not show first order in growing species and therefore is not a living polymerization. Moreover, at 60% conversion the resulting PMA has only 80% active chain ends. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6880–6895, 2008     

Cyclopentyl methyl ether: A new green co‐solvent for supplemental activator and reducing agent atom transfer radical polymerization

A new green solvent, cyclopentyl methyl ether (CPME), is used for the first time in solvent mixtures for the successful supplemental activator and reducing agent atom transfer radical polymerization (SARA ATRP) of both activated and non‐activated monomers. The SARA ATRP of methyl acrylate (MA), glycidyl methacrylate (GMA), styrene (Sty), and vinyl chloride (VC) in CPME‐based mixtures is studied and presents similar features to those reported in the literature using other SARA ATRP systems. Moreover, CPME‐based mixtures are suitable solvents for the controlled SARA ATRP of MA using different SARA agents, such as Fe(0), Cu(0), or Na₂S₂O₄. The chemical structure and the retention of the chain‐end functionality of the polymers are confirmed by ¹H NMR and MALDI‐TOF analyses and the preparation of a well‐defined PMA‐b‐PVC‐b‐PMA triblock copolymer. The method reported here presents an additional improvement in the search for new ecofriendly ATRP systems. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2722–2729     

Utilization of poly(vinylchloride) and poly(vinylidenefluoride) as macroinitiators for ATRP polymerization of hydroxyethyl methacrylate: Electroanalytical and graft‐copolymerization studies

The utilization of poly(vinylchloride) (PVC) and poly(vinylidenefluoride) (PVDF) as macroinitiators for atom transfer radical polymerization (ATRP) of hydroxyethyl methacrylate (HEMA) was studied performing electroanalytical investigations and “grafting from” experiments to evaluate the potential modification of such commercial polymers by ATRP. The study was performed changing various operating parameters such as the nature of the copper salt, the ligand, the solvent, the temperature, and the reaction time. Electroanalytical data suggest that PVC can be easily activated by both CuCl/Tris(2‐pyridylmethyl)amine (TPMA) and CuCl/Tris[2‐(dimethylamino)ethyl]amine (Me₆TREN), two catalytic systems widely adopted for ATRP reactions, in a wide range of operating conditions. PVDF is more difficult to be activated, due to the higher strength of the C? F bond. In particular, the utilization of high temperature and of a more reductant redox couple such as Cu(I)Me₆TREN/Cu(II)Me₆TREN was needed to achieve a significant degree of grafting. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2524–2536     

Atom transfer radical polymerization of sodium2‐acrylamido‐2‐methylpropanesulfonate

The first example of well‐controlled atom transfer radical polymerization (ATRP) of a permanently charged anionic acrylamide monomer is reported. ATRP of sodium 2‐acrylamido‐2‐methylpropanesulfonate (NaAMPS) was achieved with ethyl 2‐chloropropionate (ECP) as an initiator and the CuCl/CuCl₂/tris(2‐dimethylaminoethyl)amine (Me₆TREN) catalytic system. The polymerizations were carried out in 50:50 (v/v) N,N‐dimethylformamide (DMF)/water mixtures at 20 °C. Linear first‐order kinetic plots up to a 92% conversion for a target degree of polymerization of 50 were obtained with [ECP]/[CuCl]/[CuCl₂]/[Me₆TREN] = 1:1:1:2 and [AMPS] = 1 M. The molecular weight increased linearly with the conversion in good agreement with the theoretical values, and the polydispersities decreased with increasing conversion, reaching a lower limit of 1.11. The living character of the polymerization was confirmed by chain‐extension experiments. Block copolymers with N,N‐dimethylacrylamide and N‐isopropylacrylamide were also prepared. The use of a DMF/water mixed solvent should make possible the synthesis of new amphiphilic ionic block copolymers without the use of protecting group chemistry. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4446–4454, 2005     

Synthesis of well‐defined syndiotactic poly(methyl methacrylate) with low‐temperature atom transfer radical polymerization in fluoroalcohol

The copper‐mediated atom transfer radical polymerization of methyl methacrylate (MMA) in 1,1,1,3,3,3‐hexafluoro‐2‐propanol (HFIP) was studied to simultaneously control the molecular weight and tacticity. The polymerization using tris[2‐(dimethylamino)ethyl]amine (Me₆TREN) as a ligand was performed even at ?78°C with a number‐average molecular weight (M_n) of 13,400 and a polydispersity (weight‐average molecular weight/number‐average molecular weight) of 1.31, although the measured M_n's were much higher than the theoretical ones. The addition of copper(II) bromide (CuBr₂) apparently affected the early stage of the polymerization; that is, the polymerization could proceed in a controlled manner under the condition of [MMA]₀/[methyl α‐bromoisobutyrate]₀/[CuBr]₀/[CuBr₂]₀/[Me₆TREN]₀ = 200/1/1/0.2/1.2 at ?20°C with an MMA/HFIP ratio of 1/4 (v/v). For the field desorption mass spectrum of Cu^IBr/Me₆TREN in HFIP, there were [Cu(Me₆TREN)Br]⁺ and [Cu(Me₆TREN)OCH(CF₃)₂]⁺, indicating that HFIP should coordinate to the Cu^I/Me₆TREN complex. The syndiotacticity of the obtained poly(methyl methacrylate)s increased with the decreasing polymerization temperature; the racemo content was 84% for ?78°C, 77% for ?30°C, 75% for ?20°C, and 63% for 30°C. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1436–1446, 2006     

Alkyl chloride initiators for SET‐LRP of methyl acrylate

Single‐electron transfer living radical polymerization (SET‐LRP) proceeds by an outer‐sphere single‐electron transfer mechanism that induces a heterolytic bond cleavage of the initiating and propagating R‐X (where X = Cl, Br, and I) species. Therefore, unlike the homolytic bond cleavage mechanism claimed for ATRP, SET‐LRP is expected to show a small dependence of the nature of the halide group on the apparent rate constant of activation. This means the R‐X with X = Cl, Br, and I must all be efficient initiators for SET‐LRP and no chain transfer must be observed in the case of initiators with X = Br and I. Here, we report the SET‐LRP of methyl acrylate initiated with the alkyl chlorides methyl‐2‐chloropropionate (MCP) and chloroform (CHCl₃) and catalyzed by Cu(0)/Me₆‐TREN/CuCl₂ in DMSO at 25 °C. A combination of kinetic and structural analysis was used to elucidate the MCP and CHCl₃ initiating behavior under SET‐LRP conditions, and to demonstrate the very small dependence of the SET‐LRP apparent rate constant of propagation on X while providing polymers with well defined architecture. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4917–4926, 2008     

Atom transfer radical polymerization of methyl methacrylate catalyzed by ion exchange resin immobilized Co(II) hybrid catalyst

Ion exchange resin immobilized Co(II) catalyst with a small amount of soluble CuCl₂/Me₆TREN catalyst was successfully applied to atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) in DMF. Using this catalyst, a high conversion of MMA (>90%) was achieved. And poly(methyl methacrylate) (PMMA) with predicted molecular weight and narrow molecular weight distribution (M_w/M_n = 1.09–1.42) was obtained. The immobilized catalyst can be easily separated from the polymerization system by simple centrifugation after polymerization, resulting in the concentration of transition metal residues in polymer product was as low as 10 ppm. Both main catalytic activity and good controllability over the polymerization were retained by the recycled catalyst without any regeneration process. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1416–1426, 2008     

Optimized water‐based ATRP of an anionic monomer: Comprehension and properties characterization

The effect of pH and the ligand nature over the atom transfer radical polymerization (ATRP) of the anionic monomer sodium 2‐acrylamido‐2‐methylpropanesulfonate (AMPSNa) was investigated in aqueous medium by using ω‐halogenated poly(ethylene oxide) and CuBr, as macroinitiator and catalyst, respectively. The stability of both catalytic complexes and macroinitiator was investigated in function of pH, that is, fixed between 7.5 and 12. UV‐VIS spectroscopy confirmed a good catalytic complex stability in the studied conditions. Hydrolysis of the macroinitiator ester group at pH higher than 7.5 was detected by ¹H NMR and GPC, yielding ill‐defined polymer samples when ATRP is performed in alkaline conditions. 2,2′‐Bipyridyl (Bpy), 1,1,4,7,10,10‐hexamethyltriethylenetetramine (HMTETA), and tris(2‐methylaminoethyl)amine (Me₆‐TREN)‐based complexes were compared at the optimal pH (pH 7.5). When polymerization was carried out in the presence of CuBr · 2Me₆‐TREN complex block copolymers with narrow molecular weight distribution (1.1 ≤ M _W/M _n ≤ 1.3), and good agreement between theoretical and experimental molar masses was obtained. Moreover, increasing the PAMPSNa polymerization degrees (n) did not affect the control over the polymerization. Preliminary characterization of the diblock copolymers behavior in aqueous medium revealed a strong polyelectrolyte effect independently of n. Interestingly, occurrence of interactions between the PEO and PAMPSNa‐blocks was also evidenced by differential scanning calorimetry and thermogravimetric analyses. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1108–1119, 2009     

Controlled radical polymerization of tert‐butyl acrylate at ambient temperature: Effect of initiator structure and synthesis of amphiphilic block copolymers

Controlled and very rapid ambient temperature polymerization of tert‐butyl acrylate (tBA) via atom transfer radical polymerization (ATRP) and single electron transfer living radical polymerization (SET‐LRP) conditions is reported. Two initiators, one that would generate a secondary radical and another that would generate a primary radical, upon activation, are used. A very active catalyst CuBr/Me₆TREN was found to initiate rapid polymerization whether it was the primary or the secondary initiator. The polymerization was well controlled and very rapid. The initiator that produces secondary initiating site is found to result in more rapid polymerization than the one that produces primary initiating site. To explore the possibility of rapid ambient temperature polymerization through the SET‐LRP mechanism, the polymerization was also carried out in the presence of DMSO. It was found that the polymerization was much faster compared to the bulk ATRP, without loss of control. Styrene was block copolymerized from PtBA macroinitiators and vice versa. In both the cases, block copolymers with controlled molecular weights were obtained. The tBA block of the polymer was selectively hydrolyzed to get amphiphilic block copolymers. This amphiphilic block copolymer was found to be useful in preparing stable cadmium sulfide (CdS) nanoparticulate dispersion. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Water‐soluble triply‐responsive homopolymers of N,N‐dimethylaminoethyl methacrylate with a terminal azobenzene moiety

Novel water‐soluble triply‐responsive homopolymers of N,N‐dimethylaminoethyl methacrylate (DMAEMA) containing an azobenzene moiety as the terminal group were synthesized by atom transfer radical polymerization (ATRP) technique. The ATRP process of DMAEMA was initiated by an azobenzene derivative substituted with a 2‐bromoisobutyryl group (Azo‐Br) in the presence of CuCl/Me₆TREN in 1,4‐dioxane as a catalyst system. The molecular weights and their polydispersities of the resulting homopolymers (Azo‐PDMAEMA) were characterized by gel permeation chromatography (GPC). The homopolymers are soluble in aqueous solution and exhibit a lower critical solution temperature (LCST) that alternated reversibly in response to Ph and photoisomerization of the terminal azobenzene moiety. It was found that the LCST increased as pH decreased in the range of testing. Under UV light irradiation, the trans‐to‐cis photoisomerization of the azobenzene moiety resulted in a higher LCST, whereas it recovered under visible light irradiation. This kind of polymers should be particularly interesting for a variety of potential applications in some promising areas, such as drug controlled‐releasing carriers and intelligent materials because of the multistimuli responsive property. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2564–2570, 2010     

Atom Transfer Radical Polymerization of N‐Isopropylacrylamide

Summary: Controlled polymerization of N‐isopropylacrylamide (NIPAAM) was achieved by atom transfer radical polymerization (ATRP) using ethyl 2‐chloropropionate (ECP) as initiator and CuCl/tris(2‐dimethylaminoethyl)amine (Me₆TREN) as a catalytic system. The polymerization was carried out in DMF:water 50:50 (v/v) mixed solvent at 20 °C. The first order kinetic plot was linear up to 92% conversion. Controlled molecular weights up to 2.2 × 10⁴ and low polydispersities (1.19) were obtained. The living character of the polymerization was also demonstrated by self‐blocking experiments. Block copolymers with N,N‐dimethylacrylamide (DMAAM) and 3‐sulfopropyl methacrylate (SPMA) were successfully prepared.

Molecular weights and polydispersities of polyNIPAAM versus NIPAAM conversion for two different degrees of polymerization.     

SET‐LRP of methyl methacrylate initiated with sulfonyl halides

Single electron transfer‐living radical polymerization (SET‐LRP) represents a robust and versatile method for the rapid synthesis of macromolecules with defined architecture. The present article describes the polymerization of methyl methacrylate by SET‐LRP in protic solvent mixtures. Herein, the polymerization process was catalyzed by a straightforward Cu(0)wire/Me₆‐TREN catalyst while initiation was obtained by toluenesulfonyl chloride. All experiments were conducted at 50 °C and the living polymerization was demonstrated by kinetic evaluation of the SET‐LRP. The process follows first order kinetic until all monomer is consumed which was typically achieved within 4 h. The molecular weight increased linearly with conversion and the molecular weight distributions were very narrow with M_w/M_n ～ 1.1. Detailed investigations of the polymer samples by MALDI‐TOF confirmed that no termination took place and that the chain end functionality is retained throughout the polymerization process. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2236–2242, 2010     

Low-fluorinated homopolymer from heterogeneous ATRP of 2,2,2-trifluoroethyl methacrylate mediated by copper complex with nitrogen-based ligand

We report the preparation of low-fluorinated homopolymer via heterogeneous atom transfer radical polymerization (ATRP) of 2,2,2-trifluoroethyl methacrylate (TFEMA) using 2,2′-bipyridine (bpy), N,N,N′,N′,N″-pentamethyldiethylenetriamine (PMDETA), and tris(2-(dimethylamino)ethyl)amine (Me₆TREN) as representatives for di-, tri-, and tetradentate amine ligands, respectively. The ATRP was better controlled, yielding polymers with controlled molecular weights and low polydispersities (M_w/M_n ca. 1.11) when bpy was used as a ligand than when PMDETA was used. This was further supported by the results of our kinetic and chain extension studies. However, the ATRP of TFEMA had lower monomer conversions and gel formation when Me₆TREN was used as the ligand. Further reported are the thermal-properties, as well as the surface properties of the films from the resulting polymers with different molecular weights.