Template Synthesis,Metalation, and Self‐Assembly of Protic Gold(I)/(NHC)2 Tectons Driven by Metallophilic Interactions

A new protocol for the synthesis of protic bis(N‐heterocyclic carbene) complexes of Au^I by a stepwise metal‐controlled coupling of isocyanide and propargylamine is described. They are used as tectons for the construction of supramolecular architectures through metalation and self‐assembly. Notably a unique polymeric chain of Cu^I with alternate Au^I/bis(imidazolate) bridging scaffolds and strong unsupported Cu^I–Cu^I interactions has been generated, as well as a 28‐metal‐atoms cluster containing a nanopiece of Cu₂O trapped by peripheral Au^I/bis(imidazolate) moieties.     

Bimetallic Au2Cu6 Nanoclusters: Strong Luminescence Induced by the Aggregation of Copper(I) Complexes with Gold(0) Species

The concept of aggregation‐induced emission (AIE) has been exploited to render non‐luminescent Cu^ISR complexes strongly luminescent. The Cu^ISR complexes underwent controlled aggregation with Au⁰. Unlike previous AIE methods, our strategy does not require insoluble solutions or cations. X‐ray crystallography validated the structure of this highly fluorescent nanocluster: Six thiolated Cu atoms are aggregated by two Au atoms (Au₂Cu₆ nanoclusters). The quantum yield of this nanocluster is 11.7 %. DFT calculations imply that the fluorescence originates from ligand (aryl groups on the phosphine) to metal (Cu^I) charge transfer (LMCT). Furthermore, the aggregation is affected by the restriction of intramolecular rotation (RIR), and the high rigidity of the outer ligands enhances the fluorescence of the Au₂Cu₆ nanoclusters. This study thus presents a novel strategy for enhancing the luminescence of metal nanoclusters (by the aggregation of active metal complexes with inert metal atoms), and also provides fundamental insights into the controllable synthesis of highly luminescent metal nanoclusters.     

A Bis(Diphosphanyl N‐Heterocyclic Carbene) Gold Complex: A Synthon for Luminescent Rigid AuAg2 Arrays and Au5 and Cu6 Double Arrays

A mononuclear bis(NHC)/Au^I (NHC=N‐heterocyclic carbene) cationic complex with a rigid bis(phosphane)‐functionalized NHC ligand (PC_NHCP) was used to construct linear Au₃ and Ag₂Au arrays, a Au₅ cluster with two intersecting crosslike Au₃ arrays, and an unprecedented Cu₆ complex with two parallel Cu₃ arrays. The impact of metallophilic interactions on photoluminescence was studied experimentally.     

A Tray‐Shaped,PdII‐Clipped Au3 Complex as a Scaffold for the Modular Assembly of [3×n] Au Ion Clusters

A tray‐shaped Pd^II₃Au^I₃ complex ( 1 ) is prepared from 3,5‐bis(3‐pyridyl)pyrazole by means of tricyclization with Au^I followed by Pd^II clipping. Tray 1 is an efficient scaffold for the modular assembly of [3×n] Au^I clusters. Treatment of 1 with the Au^I₃ tricyclic guest 2 in H₂O/CH₃CN (7:3) or H₂O results in the selective formation of a [3×2] cluster ( 1 ? 2 ) or a [3×3] cluster ( 1 ? 2 ? 1 ), respectively. Upon subsequent addition of Ag^I ions, these complexes are converted to an unprecedented Au₃–Au₃–Ag–Au₃–Au₃ metal ion cluster.     

A Tray‐Shaped,PdII‐Clipped Au3 Complex as a Scaffold for the Modular Assembly of [3×n] Au Ion Clusters

A tray‐shaped Pd^II₃Au^I₃ complex ( 1 ) is prepared from 3,5‐bis(3‐pyridyl)pyrazole by means of tricyclization with Au^I followed by Pd^II clipping. Tray 1 is an efficient scaffold for the modular assembly of [3×n] Au^I clusters. Treatment of 1 with the Au^I₃ tricyclic guest 2 in H₂O/CH₃CN (7:3) or H₂O results in the selective formation of a [3×2] cluster ( 1 ⋅ 2 ) or a [3×3] cluster ( 1 ⋅ 2 ⋅ 1 ), respectively. Upon subsequent addition of Ag^I ions, these complexes are converted to an unprecedented Au₃–Au₃–Ag–Au₃–Au₃ metal ion cluster.     

A mixed‐valence chair‐like tetranuclear copper(I,II) cluster with three linking modes of the 3,5‐bis(2‐pyridyl)‐1,2,4‐triazole ligand

In the tetranuclear copper complex tetrakis[μ‐3,5‐bis(2‐pyridyl)‐1,2,4‐triazolido]bis[3,5‐bis(2‐pyridyl)‐1,2,4‐triazolido]dicopper(I)dicopper(II) dihydrate, [Cu^I₂Cu^II₂(C₁₂H₈N₅)₆]·2H₂O, the asymmetric unit is composed of one Cu^I center, one Cu^II center, three anionic 3,5‐bis(2‐pyridyl)‐1,2,4‐triazole (2‐BPT) ligands and one solvent water molecule. The Cu^I and Cu^II centers exhibit [Cu^IN₄] tetrahedral and [Cu^IIN₆] octahedral coordination environments, respectively. The three independent 2‐BPT ligands adopt different chelating modes, which link the copper centers to generate a chair‐like tetranuclear metallomacrocycle with metal–metal distances of about 4.4 × 6.2 Å disposed about a crystallographic inversion center. Furthermore, strong π–π stacking interactions and O—H...N hydrogen‐bonding systems link the tetracopper clusters into a two‐dimensional supramolecular network.     

Self‐Assembly of a Au16 Ring via Metal–Metal Bonding Interactions

Metal–metal bonding interactions have been employed as an efficient strategy to generate a number of unique gold(I) metallo‐macrocycles with fascinating functions. The self‐assembly, crystal structure and emission property of novel nest‐like tetramer 1₄ , namely, {[Au₄(μ‐dppm)₂(μ‐dctp^2?)](BF₄)₂}₄ ? (CH₃CN)₂ (dppm=bis(diphenylphosphino)methane, dctp^2?=N,N′‐bis(dicarbodithioate)‐2,11‐diaza[3.3]paracyclophane) is reported. The complex has been characterized by single‐crystal X‐ray diffraction analysis, ¹H NMR spectroscopy, ¹³C NMR spectroscopy, and CSI‐MS spectrometry. The aggregate demonstrates the sixteen gold(I) atoms are arranged in a ring with a circumference of 50.011(68) Å generated by Au^I???Au^I attractions. UV/visible and luminescence spectroscopy revealed that this Au^I???Au^I bonded metallo‐macrocycle exhibited yellow phosphorescence.     

Organometallic Probe for the Electronics of Base‐Stabilized Group 11 Metal Cations

A number of trimetalloborides have been synthesized through the reactions of base‐stabilized coinage metal chlorides with a dimanganaborylene lithium salt in the hope of using this organometallic platform to compare and evaluate the electronics of these popular coinage metal fragments. The adducts of Cu^I, Ag^I, and Au^I ions, stabilized by tricyclohexylphosphine (PCy₃), N‐1,3‐bis(4‐methylphenyl)imidazol‐2‐ylidene (ITol), or 1‐(2,6‐diisopropylphenyl)‐3,3,5,5‐tetramethylpyrrolidin‐2‐ylidene (CAAC), with [{Cp(CO)₂Mn}₂B]^? were studied spectroscopically, structurally, and computationally. The geometries of the adducts fall into two classes, one symmetric and one asymmetric, each relying on the combined characteristics of both the metal and ligand. The energetic factors proposed as the causes of the structural differences were investigated by ETS‐NOCV (extended transition state‐natural orbitals for chemical valence) analysis, which showed the final geometry to be controlled by the competition between the tendency of the coinage metal to adopt a higher or lower coordination number and the willingness of the cationic fragment to participate in back‐bonding interactions.     

Deactivation of Cationic CuI and AuI Catalysts for A3 Coupling by CH2Cl2: Mechanistic Implications of the Formation of Neutral CuI and AuI Chlorides

Care should be exercised when using CH₂Cl₂ as a solvent for reactions in which amines are a reagent, since undesirable deactivation of cationic copper(I) and gold(I) catalysts to form the corresponding inactive neutral chloride complexes [LMCl] (M=Cu or Au) can occur as a result of the generation of hydrogen chloride in the medium. Cu^I and Au^I deactivation has been proved for the Mannich three‐component coupling reaction. A series of Cu^I and Au^I complexes with potential mechanistic implications were isolated and characterized by X‐ray crystallography.     

Strongly Luminescent Tungsten Emitters with Emission Quantum Yields of up to 84 %: TADF and High‐Efficiency Molecular Tungsten OLEDs

Metal‐TADF (thermally activated delayed fluorescence) emitters hold promise in the development of next generation light‐emitting materials for display and lighting applications, examples of which are, however, largely confined to Cu^I and recently Au^I, Ag^I, and Au^III emitters. Herein is described the design strategy for an unprecedented type of metal‐TADF emitter based on inexpensive tungsten metal chelated with Schiff base ligand that exhibit high emission quantum yields of up to 56 % in solutions and 84 % in thin‐film (5 wt % in 1,3‐bis(N‐carbazolyl)benzene, mCP) at room temperature. Femtosecond time‐resolved emission (fs‐TRE) spectroscopy and DFT calculations were undertaken to decipher the TADF properties. Solution‐processed OLEDs fabricated with the W‐TADF emitter demonstrated external quantum efficiency (EQE) and luminance of up to 15.6 % and 16890 cd m^?2, respectively.     

Synthesis and Photophysical Properties of T-Shaped Coinage-Metal Complexes

The photophysical properties of a series of T-shaped coinage d¹⁰ metal complexes, supported by a bis(mesoionic carbene)carbazolide (CNC) pincer ligand, are explored. The series includes a rare new example of a tridentate T-shaped Ag^I complex. Post-complexation modification of the Au^I complex provides access to a linear cationic Au^I complex following ligand alkylation, or the first example of a cationic square planar Au^III−F complex from electrophilic attack on the metal centre. Emissions ranging from blue (Cu^I) to orange (Ag^I) are obtained, with variable contributions of thermally-dependent fluorescence and phosphorescence to the observed photoluminescence. Green emissions are observed for all three gold complexes (neutral T-shaped Au^I, cationic linear Au^I and square planar cationic Au^III). The higher quantum yield and longer decay lifetime of the linear gold(I) complex are indicative of increased phosphorescence contribution.     

Ring‐to‐Cage Structural Conversion via Template Effect in a Gold(I) Metallosupramolecular System

A unique example of a ring‐to‐cage structural conversion in a multinuclear gold(I) coordination system with d ‐penicillamine (d ‐H₂pen) is reported. The reaction of [Au₂Cl₂(dppe)] (dppe=1,2‐bis(diphenylphosphino)ethane) with d ‐H₂pen in a 1:1 ratio gave [Au₄(dppe)₂(d ‐pen)₂] ([ 1 ]), in which two [Au₂(dppe)]²⁺ units are linked by two d ‐pen S atoms in a cyclic form so as to have two bidentate‐N,O coordination arms. The subsequent reaction of [ 1 ] with Cu(OTf)₂ afforded [Au₄Cu(dppe)₂(d ‐pen)₂]²⁺ ([ 2 ]²⁺), in which a Cu^II ion is chelated by the two coordination arms in [ 1 ] to form an Au^I₄Cu^II bicyclic metallocage. A similar reaction using Cu(NO₃)₂ was accompanied by the ring expansion of [ 1 ] to [Au₈(dppe)₄(d ‐pen)₄], leading to the production of [Au₈Cu₂(dppe)₄(d ‐pen)₄]⁴⁺ ([ 3 ]⁴⁺). In [ 3 ]⁴⁺, two Cu^II ions are each chelated by the two coordination arms to form an Au^I₈Cu^II₂ tricyclic metallocage, accommodating a nitrate ion. The use of Ni(NO₃)₂ or Ni(OAc)₂ instead of Cu(NO₃)₂ commonly gave a tricyclic metallocage of [Au₈Ni₂(dppe)₄(d ‐pen)₄]⁴⁺ ([ 4 ]⁴⁺), but a water molecule was accommodated inside the Au^I₈Ni^II₂ metallocage.     

[μ‐4,5‐Bis(diphenylphosphino)‐9,9‐dimethylxanthene]bis[(trifluoroacetato)gold(I)] and its dichloromethane 0.58‐solvate

The dinuclear Au^I complex containing the 4,5‐bis(diphenylphosphino)‐9,9‐dimethylxanthene (xantphos) ligand and trifluoroacetate anions exists in a solvent‐free form, [μ‐4,5‐bis(diphenylphosphino)‐9,9‐dimethylxanthene]bis[(trifluoroacetato)gold(I)], [Au₂(C₂F₃O₂)₂(C₃₉H₃₂OP₂)], (I), and as a dichloromethane solvate, [Au₂(C₂F₃O₂)₂(C₃₉H₃₂OP₂)]·0.58CH₂Cl₂, (II). The trifluoroacetate anions are coordinated to the Au^I centres bridged by the xantphos ligand in both compounds. The Au^I atoms are in distorted linear coordination environments in both compounds. The phosphine substituents are in a syn arrangement in the xantphos ligand, which facilitates the formation of short aurophilic Au...Au interactions of 2.8966 (8) Å in (I) and 2.9439 (6) Å in (II).     

Linear Copper Complex Arrays as Versatile Molecular Strings: Syntheses,Structures, Luminescence,and Magnetism

The defined linear arrangement of metal atoms in discrete coordination complexes or polymers is still one of the most intriguing challenges in synthetic chemistry. These chain arrangements are of fundamental importance, because of their potential applications as molecular wires and single molecule magnets (SMM) in microelectronic devices on a molecular scale. Oligonuclear Group 11 metal complexes with suitable bridging ligands, specifically those that are based on copper as the first choice of a cheap precursor coinage metal, are of particular interest in this regard. This is due to the superior luminescence properties of these linear clusters that often show d¹⁰⋅⋅⋅d¹⁰ interactions in their molecular structures. The combination of Cu^I with heavier coinage metal ions results in tunable emissive arrays that are also stimuli-responsive. Thus, both linear multinuclear Cu^I and linear heteropolymetallic Cu^I/Ag^I as well as Cu^I/Au^I clusters are excellent candidates for applications in molecular/organic light-emitting devices (OLEDs). Alternatively, paramagnetic multinuclear cupric arrays are prominent as potential molecular wires with enhanced magnetic properties through multiple coupled d⁹ centers. This Review covers the whole range of linear multinuclear assemblies of cuprous and cupric ions in complexes and coordination polymers, their syntheses, photophysical behavior, and magnetic properties. Moreover, recent advances in the rapidly progressing field of hetero-Cu^I/Ag^I and Cu^I/Au^I molecular strings are also discussed.     

Unraveling the Impact of Gold(I)–Thiolate Motifs on the Aggregation‐Induced Emission of Gold Nanoclusters

Aggregation‐induced emission (AIE) provides an efficient strategy to synthesize highly luminescent metal nanoclusters (NCs), however, rational control of emission energy and intensity of metal NCs is still challenging. This communication reveals the impact of surface Au^I‐thiolate motifs on the AIE properties of Au NCs, by employing a series of water‐soluble glutathione (GSH)‐coordinated Au complexes and NCs as a model ([Au₁₀SR₁₀], [Au₁₅SR₁₃], [Au₁₈SR₁₄], and [Au₂₅SR₁₈]^?, SR=thiolate ligand). Spectroscopic investigations show that the emission wavelength of Au NCs is adjustable from visible to the near‐infrared II (NIR‐II) region by controlling the length of the Au^I‐SR motifs on the NC surface. Decreasing the length of Au^I‐SR motifs also changes the origin of cluster luminescence from AIE‐type phosphorescence to Au⁰‐core‐dictated fluorescence. This effect becomes more prominent when the degree of aggregation of Au NCs increases in solution.     

1,3‐O‐Transposition or Trisubstituted Z‐Enol Ester? A Comparative Study of Reactions of Ynones

Ynones are useful substrates for transition‐metal‐mediated synthesis. The Au^I‐catalyzed 1,3‐O‐transposition is an important reaction of ynones. Recently, an efficient Cu^I‐catalyzed synthesis of trisubstituted Z‐enol esters via interrupting the traditional 1,3‐O‐transposition reaction of ynones was reported by Zhu's group. Herein, density functional theory studies disclosed that the hydrogen bond formed by carboxylic acid plays an important role for the reactivity and selectivity in this novel reaction. A qualitative rule was also found to explain the substituent effect in the ynone substrate, and this is consistent with experiments. The Au^I‐catalyst and Cu^I‐catalyst were further compared to interpret the essential cause of why the Au^I‐catalyst prefers the 1,3‐O‐transpostion reaction. These conclusions might be helpful for the rational design of reactions of ynones.     

Formation,Expansion, and Interconversion of Metallarings in a Sulfur‐Bridged AuICoIII Coordination System

A novel Au^ICo^III coordination system that is derived from the newly prepared [Co(D ‐nmp)₂]^? ( 1 ^?; D ‐nmp=N‐methyl‐D ‐penicillaminate) and a gold(I) precursor Au^I is reported. Complex 1 ^? acts as a sulfur‐donating metallaligand and reacts with the gold(I) precursor to give [Au₂Co₂(D ‐nmp)₄] ( 2 ), which has an eight‐membered Au^I₂Co^III₂ metallaring. Treatment of 2 with [Au₂(dppe)₂]²⁺ (dppe=1,2‐bis(diphenylphosphino)ethane) leads to the formation of [Au₄Co₂(dppe)₂(D ‐nmp)₄]²⁺ ( 3 ²⁺), which consists of an 18‐membered Au^I₄Co^III₂ metallaring that accommodates a tetrahedral anion (BF₄^?, ClO₄^?, ReO₄^?). In solution, the metallaring structure of 3 ²⁺ is readily interconvertible with the nine‐membered Au^I₂Co^III metallaring structure of [Au₂Co(dppe)(D ‐nmp)₂]⁺ ( 4 ⁺); this process depends on external factors, such as solvent, concentration, and nature of the counteranion. These results reveal the lability of the Au? S and Au? P bonds, which is essential for metallaring expansion and contraction.     

Formation,Expansion, and Interconversion of Metallarings in a Sulfur‐Bridged AuICoIII Coordination System

A novel Au^ICo^III coordination system that is derived from the newly prepared [Co(D ‐nmp)₂]⁻ ( 1 ⁻; D ‐nmp=N‐methyl‐D ‐penicillaminate) and a gold(I) precursor Au^I is reported. Complex 1 ⁻ acts as a sulfur‐donating metallaligand and reacts with the gold(I) precursor to give [Au₂Co₂(D ‐nmp)₄] ( 2 ), which has an eight‐membered Au^I₂Co^III₂ metallaring. Treatment of 2 with [Au₂(dppe)₂]²⁺ (dppe=1,2‐bis(diphenylphosphino)ethane) leads to the formation of [Au₄Co₂(dppe)₂(D ‐nmp)₄]²⁺ ( 3 ²⁺), which consists of an 18‐membered Au^I₄Co^III₂ metallaring that accommodates a tetrahedral anion (BF₄⁻, ClO₄⁻, ReO₄⁻). In solution, the metallaring structure of 3 ²⁺ is readily interconvertible with the nine‐membered Au^I₂Co^III metallaring structure of [Au₂Co(dppe)(D ‐nmp)₂]⁺ ( 4 ⁺); this process depends on external factors, such as solvent, concentration, and nature of the counteranion. These results reveal the lability of the Au S and Au P bonds, which is essential for metallaring expansion and contraction.     

Luminescence properties and optimized structural conformations of the S0, S1 and T1 states of a tetranuclear formamidinate complex based on AuI and AgI metal ions

N,N′‐Bis(pyridin‐4‐yl)formamidine (4‐pyfH) was reacted with Au^I and Ag^I metal salts to form a novel tetranuclear complex, tetrakis[μ‐N,N′‐bis(pyridin‐4‐yl)formamidinato]digold(I)disilver(I), [Ag₂Au₂(C₁₁H₉N₄)₂] or [Au_xAg_4–x(4‐pyf)₄] (x = 0–4), 1 , which is supported by its metallophilicity. Due to the potential permutation of the coordinated metal ions, six different canonical structures of 1 can be obtained. Complex 1 shows an emission at 501 nm upon excitation at 375 nm in the solid state and an emission at 438 nm upon excitation at 304 nm when dispersed in methanol. Time‐dependent density functional theory (TD‐DFT) calculations confirmed that these emissions can be ascribed to metal‐to‐ligand charge transfer (MLCT) processes. Moreover, the calculations of the optimized structural conformations of the S₀ ground state, and the S₁ and T₁ excited states are discussed and suggest a distorted planar conformation for the tetranuclear Au₂Ag₂ complex.     

Predicting Stable Molecular Structures for (RNC)2AuIX Complexes

Calculations have been performed at the MP2 and DFT levels for investigating the reasons for the difficulties in synthesizing bis(isocyanide)gold(I) halide complexes. Three‐coordinated gold(I) complexes of the type (R₃P)₂Au^IX ( 1 ) can be synthesized, whereas the analogous isocyanide complexes (RNC)₂Au^IX ( 2 ) are not experimentally known. The molecular structures of (R₃P)₂Au^IX (X = Cl, Br, and I) and (RNC)₂Au^IX with X = halide, cyanide, nitrite, methylthiolate, and thiocyanate are compared and structural differences are discussed. Calculations of molecular properties elucidate which factors determine the strength of the gold‐ligand interactions in (RNC)₂Au^IX. The linear bonding mode of RNC favors a T‐shaped geometry instead of the planar Y‐shaped trigonal structure of (R₃P)₂Au^IX complexes that have been synthesized. An increased polarity of the Au–X bond in 2 leads to destabilization of the Y‐shaped structure. Chalcogen‐containing ligands or cyanide appear to be good X‐ligand candidates for synthesis of (RNC)₂Au^IX complexes.