首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 15 毫秒
1.
Lithium metal is a promising anode material for next-generation high-energy-density batteries but suffers from low stripping/plating Coulombic efficiency and dendritic growth particularly at sub-zero temperatures. Herein, a poorly-flammable, locally concentrated ionic liquid electrolyte with a wide liquidus range extending well below 0 °C is proposed for low-temperature lithium metal batteries. Its all-anion Li+ solvation and phase-nano-segregation solution structure are sustained at low temperatures, which, together with a solid electrolyte interphase rich in inorganic compounds, enable dendrite-free operation of lithium metal anodes at −20 °C and 0.5 mA cm−2, with a Coulombic efficiency of 98.9 %. As a result, lithium metal batteries coupling thin lithium metal anodes (4 mAh cm−2) and high-loading LiNi0.8Co0.15Al0.05O2 cathodes (10 mg cm−2) retain 70 % of the initial capacity after 100 cycles at −20 °C. These results, as a proof of concept, demonstrate the applicability of locally concentrated ionic liquid electrolytes for low-temperature lithium metal batteries.  相似文献   

2.
Aqueous copper metal batteries with acidic electrolytes are regarded as promising candidates for low-temperature energy storage, benefiting from fast kinetics of protons and acid resistance of copper. Here, a Cu(BF4)2 electrolyte that spontaneously generates protons is developed for ultralow-temperature copper metal batteries. Systematic studies demonstrate that the hydrolysis of BF4 generates more protons, rendering the Cu(BF4)2 among the most effective aqueous electrolyte capable of breaking hydrogen bonds in water molecules. This electrolyte endows a polyaniline/Cu battery to deliver a short charging time of 21 s and a charge/discharge capability of up to 10 A g−1 at −30 °C, along with a high discharge specific capacity of 70 mAh g−1 and a supercapacitor-comparable power density of 3000 W kg−1. Furthermore, it can exhibit a long and stable cycling lifespan over 10 000 cycles at −50 °C and works well at −70 °C. This work provides an opportunity for intrinsically acidic electrolytes.  相似文献   

3.
The utilization of CO2 in Li-CO2 batteries is attracting extensive attention. However, the poor rechargeability and low applied current density have remained the Achilles’ heel of this energy device. The gel polymer electrolyte (GPE), which is composed of a polymer matrix filled with tetraglyme-based liquid electrolyte, was used to fabricate a rechargeable Li-CO2 battery with a carbon nanotube-based gas electrode. The discharge product of Li2CO3 formed in the GPE-based Li-CO2 battery exhibits a particle-shaped morphology with poor crystallinity, which is different from the contiguous polymer-like and crystalline discharge product in conventional Li-CO2 battery using a liquid electrolyte. Accordingly, the GPE-based battery shows much improved electrochemical performance. The achieved cycle life (60 cycles) and rate capability (maximum applied current density of 500 mA g−1) are much higher than most of previous reports, which points a new way to develop high-performance Li-CO2 batteries.  相似文献   

4.
Advanced aqueous batteries are promising for next generation flexible devices owing to the high safety, yet still requiring better cycling stability and high capacities in wide temperature range. Herein, a polymeric acid hydrogel electrolyte (PAGE) with 3 M Zn(ClO4)2 was fabricated for high performance Zn/polyaniline (PANI) batteries. With PAGE, even at −35 °C the Zn/Zn symmetrical battery can keep stable for more than 1 500 h under 2 mA cm−2, and the Zn/PANI battery can provide ultra-high stable specific capacity of 79.6 mAh g−1 for more than 70 000 cycles at 15 A g−1. This can be mainly ascribed to the −SO3H+ function group in PAGE. It can generate constant protons and guide the (002) plane formation to accelerate the PANI redox reaction kinetics, increase the specific capacity, and suppress the side reaction and dendrites. This proton-supplying strategy by polymeric acid hydrogel may further propel the development of high performance aqueous batteries.  相似文献   

5.
Lithium-sulfur (Li-S) batteries are one of the most promising high-energy-density storage systems. However, serious capacity attenuation and poor cycling stability induced by the shuttle effect of polysulfide intermediates can impede the practical application of Li-S batteries. Herein we report a novel sulfur cathode by intertwining multi-walled carbon nanotubes (CNTs) and porous boron nitride fibers (BNFs) for the subsequent loading of sulfur. This structural design enables trapping of active sulfur and serves to localize the soluble polysulfide within the cathode region, leading to low active material loss. Compared with CNTs/S, CNTs/BNFs/S cathodes deliver a high initial capacity of 1222 mAh g−1 at 0.1 C. Upon increasing the current density to 4 C, the cell retained a capacity of 482 mAh g−1 after 500 cycles with a capacity decay of only 0.044 % per cycle. The design of CNTs/BNFs/S gives new insight on how to optimize cathodes for Li-S batteries.  相似文献   

6.
Elaborately designed multifunctional electrocatalysts capable of promoting Li+ and CO2 transport are essential for upgrading the cycling stability and rate capability of Li-CO2 batteries. Hydrogen-bonded organic frameworks (HOFs) with open channels and easily functionalized surfaces hold great potential for applications in efficient cathodes of Li-CO2 batteries. Herein, a robust HOFS (HOF-FJU-1) is introduced for the first time as a co-catalyst in the cathode material of Li-CO2 batteries. HOF-FJU-1 with cyano groups located periodically in the pore can induce homogeneous deposition of discharge products and accommodate volumetric expansion of discharge products during cycling. Besides, HOF-FJU-1 enables effective interaction between Ru0 nanoparticles and cyano groups, thus forming efficient and uniform catalytic sites for CRR/CER. Moreover, HOF-FJU-1 with regularly arranged open channels are beneficial for CO2 and Li+ transport, enabling rapid redox kinetic conversion of CO2. Therefore, the HOF-based Li-CO2 batteries are capable of stable operation at 400 mA g−1 for 1800 h and maintain a low overpotential of 1.96 V even at high current densities up to 5 A g−1. This work provides valuable guidance for developing multifunctional HOF-based catalysts to upgrade the longevity and rate capability of Li-CO2 batteries.  相似文献   

7.
All-solid-state polymer lithium-ion batteries are ideal choice for the next generation of rechargeable lithium-ion batteries due to their high energy, safety and flexibility. Among all polymer electrolytes, PEO-based polymer electrolytes have attracted extensive attention because they can dissolve various lithium salts. However, the ionic conductivity of pure PEO-based polymer electrolytes is limited due to high crystallinity and poor segment motion. An inorganic filler SiO2 nanospheres and a plasticizer Succinonitrile (SN) are introduced into the PEO matrix to improve the crystallization of PEO, promote the formation of amorphous region, and thus improve the movement of PEO chain segment. Herein, a PEO18−LiTFSI−5 %SiO2−5 %SN composite solid polymer electrolyte (CSPE) was prepared by solution-casting. The high ionic conductivity of the electrolyte was demonstrated at 60 °C up to 3.3×10−4 S cm−1. Meanwhile, the electrochemical performance of LiFePO4/CSPE/Li all-solid-state battery was tested, with discharge capacity of 157.5 mAh g−1 at 0.5 C, and capacity retention rate of 99 % after 100 cycles at 60 °C. This system provides a feasible strategy for the development of efficient all-solid-state lithium-ion batteries.  相似文献   

8.
The electrolytes in lithium metal batteries have to be compatible with both lithium metal anodes and high voltage cathodes, and can be regulated by manipulating the solvation structure. Herein, to enhance the electrolyte stability, lithium nitrate (LiNO3) and 1,1,2,2-tetrafuoroethyl-2′,2′,2′-trifuoroethyl(HFE) are introduced into the high-concentration sulfolane electrolyte to suppress Li dendrite growth and achieve a high Coulombic efficiency of >99 % for both the Li anode and LiNi0.8Mn0.1Co0.1O2 (NMC811) cathodes. Molecular dynamics simulations show that NO3 participates in the solvation sheath of lithium ions enabling more bis(trifluoromethanesulfonyl)imide anion (TFSI) to coordinate with Li+ ions. Therefore, a robust LiNxOy−LiF-rich solid electrolyte interface (SEI) is formed on the Li surface, suppressing Li dendrite growth. The LiNO3-containing sulfolane electrolyte can also support the highly aggressive LiNi0.8Mn0.1Co0.1O2 (NMC811) cathode, delivering a discharge capacity of 190.4 mAh g−1 at 0.5 C for 200 cycles with a capacity retention rate of 99.5 %.  相似文献   

9.
Rechargeable sodium/chlorine (Na/Cl2) batteries are emerging candidates for sustainable energy storage owing to their superior energy densities and the high abundance of Na and Cl elements. However, their practical applications have been plagued by the poor rate performance (e.g., a maximum discharge current density of 150 mA g−1), as the widely used carbon nanosphere cathodes show both sluggish electron-ion transport and reaction kinetics. Here, by mimicking the sufficient mass and energy transport in a sponge, we report a bicontinuous-structured carbon cubosome with heteroatomic doping, which allows efficient Na+ and electron transport and promotes Cl2 adsorption and conversion, thus unlocking ultrahigh-rate Na/Cl2 batteries, e.g., a maximum discharge current density of 16,000 mA g−1 that is more than two orders of magnitude higher than previous reports. The optimized solid–liquid–gas (carbon–electrolyte–Cl2) triple interfaces further contribute to a maximum reversible capacity and cycle life of 2,000 mAh g−1 and 250 cycles, respectively. This study establishes a universal approach for improving the sluggish kinetics of conversion-type battery reactions, and provides a new paradigm to resolve the long-standing dilemma between high energy and power densities in energy storage devices.  相似文献   

10.
Sodium-ion batteries (SIBs) are recognized as promising energy storage devices. However, they suffer from rapid capacity decay at ultra-low temperatures due to high Na+ desolvation energy barrier and unstable solid electrolyte interphase (SEI). Herein, a weakly solvating electrolyte (WSE) with decreased ion-dipole interactions is designed for stable sodium storage in hard carbon (HC) anode at ultra-low temperatures. 2-methyltetrahydrofuran with low solvating power is incorporated into tetrahydrofuran to regulate the interactions between Na+ and solvents. The reduced Na+-dipole interactions facilitate more anionic coordination in the first solvation sheath, which consistently maintains anion-enhanced solvation structures from room to low temperatures to promote inorganic-rich SEI formation. These enable WSE with a low freezing point of −83.3 °C and faster Na+ desolvation kinetics. The HC anode thus affords reversible capacities of 243.2 and 205.4 mAh g−1 at 50 mA g−1 at −40 and −60 °C, respectively, and the full cell of HC||Na3V2(PO4)3 yields an extended lifespan over 250 cycles with high capacity retention of ~100 % at −40 °C. This work sheds new lights on the ion-dipole regulation for ultra-low temperature SIBs.  相似文献   

11.
Organic small molecules as high-capacity cathodes for Zn-organic batteries have inspired numerous interests, but are trapped by their easy-dissolution in electrolytes. Here we knit ultrastable lock-and-key hydrogen-bonding networks between 2, 7-dinitropyrene-4, 5, 9, 10-tetraone (DNPT) and NH4+ charge carrier. DNPT with octuple-active carbonyl/nitro centers (H-bond acceptor) are redox-exclusively accessible for flexible tetrahedral NH4+ ions (H-bond donator) but exclude larger and rigid Zn2+, due to a lower activation energy (0.14 vs. 0.31 eV). NH4+ coordinated H-bonding chemistry conquers the stability barrier of DNPT in electrolyte, and gives fast diffusion kinetics of non-metallic charge carrier. A stable two-step 4e NH4+ coordination with DNPT cathode harvests a high capacity (320 mAh g−1), a high-rate capability (50 A g−1) and an ultralong life (60,000 cycles). This finding points to a new paradigm for H-bond stabilized organic small molecules to design advanced zinc batteries.  相似文献   

12.
Rechargeable zinc-ion batteries (ZIBs) are potential for grid-scale applications owing to their safety, low price, and available sources. The development of ZIBs cathode with high specific capacity, wide operating voltage window and stable cyclability is urgently needed in next-generation commercial batteries. Herein, we report a structurally crystalline-stable Mn(VO3)2 nanobelts cathode for ZIBs prepared via a facile hydrothermal method. The as-synthesized Mn(VO3)2 exhibited high specific capacity of 350 mAh g−1 at 0.1 A g−1, and maintained a capacity retention of 92 % after 10,000 cycles at 2 A g−1. It also showed good rate performance and obtained a reversible capacity of up to 200 mAh g−1 after 600 cycles at 0.2 A g−1 under −20 °C. The electrochemical tests suggest that Mn(VO3)2 nanobelts impart fast Zn2+ ions migration, and the introduction of manganese atoms help make the structures more indestructible, leading to a good rate performance and prolonged cycle lifespan.  相似文献   

13.
The high theoretical specific capacity, strong structural designability and relatively inexpensive manufacturing cost make the exploration of organic electrode materials more attractive in recent years. In this article, owing to the large π-conjugated structure, plenty of nitrogen heteroatoms and multiring aromatic system, polyazaacene analogue poly(1,6-dihydropyrazino[2,3 g]quinoxaline-2,3,8-triyl-7-(2H)-ylidene-7,8-dimethylidene) (PQL) was applied as the anode in sodium-ion batteries (SIBs). PQL was almost insoluble in conventional liquid organic electrolyte (1 M NaClO4 in ethylene carbonate (EC)/dimethyl carbonate (DMC) (v:v=1 : 1) with 5 % fluoroethylene carbonate (FEC)), which strongly improved its cycle stability. The initial discharge capacity was obtained to be 1825 mAh g−1 at the current density of 100 mA g−1 and stabilized at 317 mAh g−1 after 400 cycles with the coulombic efficiency as high as 97 %. It not only showed good rate capability at high current densities (202, 183 mAh g−1 at 1 A g−1 and 1.5 A g−1) but also had a superior energy density around 290 Wh kg−1.  相似文献   

14.
Binary transition-metal oxides (BTMOs) with hierarchical micro–nano-structures have attracted great interest as potential anode materials for lithium-ion batteries (LIBs). Herein, we report the fabrication of hierarchical cauliflower-like CoFe2O4 (cl-CoFe2O4) via a facile room-temperature co-precipitation method followed by post-synthetic annealing. The obtained cauliflower structure is constructed by the assembly of microrods, which themselves are composed of small nanoparticles. Such hierarchical micro–nano-structure can promote fast ion transport and stable electrode–electrolyte interfaces. As a result, the cl-CoFe2O4 can deliver a high specific capacity (1019.9 mAh g−1 at 0.1 A g−1), excellent rate capability (626.0 mAh g−1 at 5 A g−1), and good cyclability (675.4 mAh g−1 at 4 A g−1 for over 400 cycles) as an anode material for LIBs. Even at low temperatures of 0 °C and −25 °C, the cl-CoFe2O4 anode can deliver high capacities of 907.5 and 664.5 mAh g−1 at 100 mA g−1, respectively, indicating its wide operating temperature. More importantly, the full-cell assembled with a commercial LiFePO4 cathode exhibits a high rate performance (214.2 mAh g−1 at 5000 mA g−1) and an impressive cycling performance (612.7 mAh g−1 over 140 cycles at 300 mA g−1) in the voltage range of 0.5–3.6 V. Kinetic analysis reveals that the electrochemical performance of cl-CoFe2O4 is dominated by pseudocapacitive behavior, leading to fast Li+ insertion/extraction and good cycling life.  相似文献   

15.
Rechargeable Mg batteries (RMBs) are advantageous large-scale energy-storage devices because of the high abundance and high safety, but exploring high-performance cathodes remains the largest difficulty for their development. Compared with oxides and sulfides, selenides show better Mg-storage performance because the weaker interaction with the Mg2+ cation favors fast kinetics. Herein, nanorod-like FeSe2 was synthesized and investigated as a cathode for RMBs. Compared with microspheres and microparticles, nanorods exhibit higher capacity and better rate capability with a smaller particle size. The FeSe2 nanorods show a high capacity of 191 mAh g−1 at 50 mA g−1 and a good rate performance of 39 mAh g−1 at 1000 mA g−1. Ex situ characterizations demonstrate the Mg2+ intercalation mechanism for FeSe2, and a slight conversion reaction occurs on the surface of the particles. The capacity fading is mainly because of the dissolution of Fe2+, which is caused by the reaction between Fe2+ and Cl of the electrolyte during the charge process on the surface of the particles. The surface of FeSe2 is mainly selenium after long cycling, which may also dissolve in the electrolyte during cycling. The present work develops a new type of Mg2+ intercalation cathode for RMBs. More importantly, the fading mechanism revealed herein has considered the specificity of Mg battery electrolyte and would assist a better understanding of selenide cathodes for RMBs.  相似文献   

16.
Rechargeable aqueous batteries are promising energy storage devices because of their high safety and low cost. However, their energy densities are generally unsatisfactory due to the limited capacities of ion-inserted electrode materials, prohibiting their widespread applications. Herein, a high-energy aqueous all-sulfur battery was constructed via matching S/Cu2S and S/CaSx redox couples. In such batteries, both cathodes and anodes undergo the conversion reaction between sulfur/metal sulfides redox couples, which display high specific capacities and rational electrode potential difference. Furthermore, during the charge/discharge process, the simultaneous redox of Cu2+ ion charge-carriers also takes place and contributes to a more two-electron transfer, which doubles the capacity of cathodes. As a result, the assembled aqueous all-sulfur batteries deliver a high discharge capacity of 447 mAh g−1 based on total mass of sulfur in cathode and anode at 0.1 A g−1, contributing to an enhanced energy density of 393 Wh kg−1. This work will widen the scope for the design of high-energy aqueous batteries.  相似文献   

17.
Xinyi Zhao  Dr. Fei Xu 《Chemphyschem》2023,24(16):e202300333
Rechargeable magnesium batteries (RMBs) attract research interest owing to the low cost and high reliability, but the design of cathode materials is the major difficulty of their development. The bivalent magnesium cation suffers from a strong interaction with the anion and is difficult to intercalate into traditional magnesium intercalation cathodes. Herein, an amorphous molybdenum polysulfide (a-MoSx) is synthesized via a simple one-step solvothermal reaction and used as the cathode material for RMBs. The a-MoSx cathode provides a high capacity (185 mAh g−1) and a good rate performance (50 mAh g−1 at 1000 mA g−1), which are much superior compared with crystalline MoS2 and demonstrate the privilege of amorphous RMB cathodes. A mechanism study demonstrates both of molybdenum and sulfur undergo redox reactions and contribute to the capacity. Further optimizations indicate low-temperature synthesis would favor the magnesium storage performance of a-MoSx.  相似文献   

18.
The limited triple-phase boundaries (TPBs) in solid-state cathodes (SSCs) and high resistance imposed by solid electrolytes (SEs) make the achievement of high-performance all-solid-state lithium-oxygen (ASS Li-O2) batteries a challenge. Herein, an adjustable-porosity plastic crystal electrolyte (PCE) has been fabricated by employing a thermally induced phase separation (TIPS) technique to overcome the above tricky issues. The SSC produced through the in-situ introduction of the porous PCE on the surface of the active material, facilitates the simultaneous transfer of Li+/e, as well as ensures fast flow of O2, forming continuous and abundant TPBs. The high Li+ conductivity, softness, and adhesion of the dense PCE significantly reduce the battery resistance to 115 Ω. As a result, the ASS Li-O2 battery based on this adjustable-porosity PCE exhibits superior performances with high specific capacity (5963 mAh g−1), good rate capability, and stable cycling life up to 130 cycles at 32 °C. This novel design and exciting results could open a new avenue for ASS Li-O2 batteries.  相似文献   

19.
Vanadium-based oxides with high theoretical specific capacities and open crystal structures are promising cathodes for aqueous zinc-ion batteries (AZIBs). In this work, the confined synthesis can insert metal ions into the interlayer spacing of layered vanadium oxide nanobelts without changing the original morphology. Furthermore, we obtain a series of nanomaterials based on metal-confined nanobelts, and describe the effect of interlayer spacing on the electrochemical performance. The electrochemical properties of the obtained Al2.65V6O132.07H2O as cathodes for AZIBs are remarkably improved with a high initial capacity of 571.7 mAh ⋅ g−1 at 1.0 A g−1. Even at a high current density of 5.0 A g−1, the initial capacity can still reach 205.7 mAh g−1, with a high capacity retention of 89.2 % after 2000 cycles. This study demonstrates that nanobelts confined with metal ions can significantly improve energy storage applications, revealing new avenues for enhancing the electrochemical performance of AZIBs.  相似文献   

20.
Aqueous rechargeable batteries are prospective candidates for large-scale grid energy storage. However, traditional anode materials applied lack acid-alkali co-tolerance. Herein, we report a covalent organic framework containing pyrazine (C=N) and phenylimino (−NH−) groups (HPP-COF) as a long-cycle and high-rate anode for both acidic and alkaline batteries. The HPP-COF′s robust covalent linkage and the hydrogen bond network between −NH− and water molecules collectively improve the acid-alkaline co-tolerance. More importantly, the hydrogen bond network promotes the rapid transport of H+/OH by the Grotthuss mechanism. As a result, the HPP-COF delivers a superior capacity and cycle stability (66.6 mAh g−1@ 30 A g−1, over 40000 cycles in 1 M H2SO4 electrolyte; 91.7 mAh g−1@ 100 A g−1, over 30000 cycles @ 30 A g−1 in 1 M NaOH electrolyte). The work opens a new direction for the structural design and application of COF materials in acidic and alkaline batteries.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号