Experimental and Computational Analysis of the Solvent‐Dependent O2/Li+‐O2− Redox Couple: Standard Potentials,Coupling Strength,and Implications for Lithium–Oxygen Batteries

Understanding and controlling the kinetics of O₂ reduction in the presence of Li⁺‐containing aprotic solvents, to either Li⁺‐O₂^? by one‐electron reduction or Li₂O₂ by two‐electron reduction, is instrumental to enhance the discharge voltage and capacity of aprotic Li‐O₂ batteries. Standard potentials of O₂/Li⁺‐O₂^? and O₂/O₂^? were experimentally measured and computed using a mixed cluster‐continuum model of ion solvation. Increasing combined solvation of Li⁺ and O₂^? was found to lower the coupling of Li⁺‐O₂^? and the difference between O₂/Li⁺‐O₂^? and O₂/O₂^? potentials. The solvation energy of Li⁺ trended with donor number (DN), and varied greater than that of O₂^? ions, which correlated with acceptor number (AN), explaining a previously reported correlation between Li⁺‐O₂^? solubility and DN. These results highlight the importance of the interplay between ion–solvent and ion–ion interactions for manipulating the energetics of intermediate species produced in aprotic metal–oxygen batteries.     

From O2− to HO2−: Reducing By‐Products and Overpotential in Li‐O2 Batteries by Water Addition

The development of aprotic Li‐O₂ batteries, which are promising candidates for high gravimetric energy storage devices, is severely limited by superoxide‐related parasitic reactions and large voltage hysteresis. The fundamental reaction pathway of the aprotic Li‐O₂ battery can be altered by the addition of water, which changes the discharge intermediate from superoxide (O₂⁻) to hydroperoxide (HO₂⁻). The new mechanism involving HO₂⁻ intermediate realizes the two‐electron transfer through a single step, which significantly suppresses the superoxide‐related side reactions. Moreover, addition of water also triggers a solution‐based pathway that effectively reduces the voltage hysteresis. These discoveries offer a possible solution for desirable Li‐O₂ batteries free of aggressive superoxide species, highlighting the design strategy of modifying the reaction pathway for Li‐O₂ electrochemistry.     

Identifying Reactive Sites and Transport Limitations of Oxygen Reactions in Aprotic Lithium‐O2 Batteries at the Stage of Sudden Death

Discharging of the aprotic Li‐O₂ battery relies on the O₂ reduction reaction (ORR) forming solid Li₂O₂ in the positive electrode, which is often characterized by a sharp voltage drop (that is, sudden death) at the end of discharge, delivering a capacity far below its theoretical promise. Toward unlocking the energy capabilities of Li‐O₂ batteries, it is crucial to have a fundamental understanding of the origin of sudden death in terms of reactive sites and transport limitations. Herein, a mechanistic study is presented on a model system of Au|Li₂O₂|Li⁺ electrolyte, in which the Au electrode was passivated with a thin Li₂O₂ film by discharging to the state of sudden death. Direct conductivity measurement of the Li₂O₂ film and in situ spectroscopic study of ORR using ¹⁸O₂ for passivation and ¹⁶O₂ for further discharging provide compelling evidence that ORR (and O₂ evolution reaction as well) occurs at the buried interface of Au|Li₂O₂ and is limited by electron instead of Li⁺ and O₂ transport.     

Electrospun V2O5 Nanostructures with Controllable Morphology as High‐Performance Cathode Materials for Lithium‐Ion Batteries

Porous V₂O₅ nanotubes, hierarchical V₂O₅ nanofibers, and single‐crystalline V₂O₅ nanobelts were controllably synthesized by using a simple electrospinning technique and subsequent annealing. The mechanism for the formation of these controllable structures was investigated. When tested as the cathode materials in lithium‐ion batteries (LIBs), the as‐formed V₂O₅ nanostructures exhibited a highly reversible capacity, excellent cycling performance, and good rate capacity. In particular, the porous V₂O₅ nanotubes provided short distances for Li⁺‐ion diffusion and large electrode–electrolyte contact areas for high Li⁺‐ion flux across the interface; Moreover, these nanotubes delivered a high power density of 40.2 kW kg^?1 whilst the energy density remained as high as 201 W h kg^?1, which, as one of the highest values measured on V₂O₅‐based cathode materials, could bridge the performance gap between batteries and supercapacitors. Moreover, to the best of our knowledge, this is the first preparation of single‐crystalline V₂O₅ nanobelts by using electrospinning techniques. Interestingly, the beneficial crystal orientation provided improved cycling stability for lithium intercalation. These results demonstrate that further improvement or optimization of electrochemical performance in transition‐metal‐oxide‐based electrode materials could be realized by the design of 1D nanostructures with unique morphologies.     

Three Dimensionally Ordered Mesoporous Carbon as a Stable,High‐Performance Li–O2 Battery Cathode

Enabled by the reversible conversion between Li₂O₂ and O₂, Li–O₂ batteries promise theoretical gravimetric capacities significantly greater than Li‐ion batteries. The poor cycling performance, however, has greatly hindered the development of this technology. At the heart of the problem is the reactivity exhibited by the carbon cathode support under cell operation conditions. One strategy is to conceal the carbon surface from reactive intermediates. Herein, we show that long cyclability can be achieved on three dimensionally ordered mesoporous (3DOm) carbon by growing a thin layer of FeO_x using atomic layer deposition (ALD). 3DOm carbon distinguishes itself from other carbon materials with well‐defined pore structures, providing a unique material to gain insight into processes key to the operations of Li–O₂ batteries. When decorated with Pd nanoparticle catalysts, the new cathode exhibits a capacity greater than 6000 mAh g_carbon⁻¹ and cyclability of more than 68 cycles.     

Free‐Standing Air Cathodes Based on 3D Hierarchically Porous Carbon Membranes: Kinetic Overpotential of Continuous Macropores in Li‐O2 Batteries

Free‐standing macroporous air electrodes with enhanced interfacial contact, rapid mass transport, and tailored deposition space for large amounts of Li₂O₂ are essential for improving the rate performance of Li‐O₂ batteries. An ordered mesoporous carbon membrane with continuous macroporous channels was prepared by inversely topological transformation from ZnO nanorod array. Utilized as a free‐standing air cathode for Li‐O₂ battery, the hierarchically porous carbon membrane shows superior rate performance. However, the increased cross‐sectional area of the continuous macropores on the cathode surface leads to a kinetic overpotential with large voltage hysteresis and linear voltage variation against Butler–Volmer behavior. The kinetics were investigated based on the rate‐determining step of second electron transfer accompanied by migration of Li⁺ in solid or quasi‐solid intermediates. These discoveries shed light on the design of the air cathode for Li‐O₂ batteries with high‐rate performance.     

The Long‐Term Stability of KO2 in K‐O2 Batteries

The rechargeable K‐O₂ battery is recognized as a promising energy storage solution owing to its large energy density, low overpotential, and high coulombic efficiency based on the single‐electron redox chemistry of potassium superoxide. However, the reactivity and long‐term stability of potassium superoxide remains ambiguous in K‐O₂ batteries. Parasitic reactions are explored and the use of ion chromatography to quantify trace amounts of side products is demonstrated. Both quantitative titrations and differential electrochemical mass spectrometry confirm the highly reversible single‐electron transfer process, with 98 % capacity attributed to the formation and decomposition of KO₂. In contrast to the Na‐O₂ counterparts, remarkable shelf‐life is demonstrated for K‐O₂ batteries owing to the thermodynamic and kinetic stability of KO₂, which prevents the spontaneous disproportionation to peroxide. This work sheds light on the reversible electrochemical process of K⁺+e^?+O₂?KO₂.     

Lithium‐Rich Layered Oxide Li1.18Ni0.15Co0.15Mn0.52O2 as the Cathode Material for Hybrid Sodium‐Ion Batteries

Li‐rich layered oxide Li_1.18Ni_0.15Co_0.15Mn_0.52O₂ (LNCM) is, for the first time, examined as the positive electrode for hybrid sodium‐ion battery and its Na⁺ storage properties are comprehensively studied in terms of galvanostatic charge–discharge curves, cyclic voltammetry and rate capability. LNCM in the proposed sodium‐ion battery demonstrates good rate capability whose discharge capacity reaches about 90 mA h g^?1 at 10 C rate and excellent cycle stability with specific capacity of about 105 mA h g^?1 for 200 cycles at 5 C rate. Moreover, ex situ ICP‐OES suggests interesting mixed‐ions migration processes: In the initial two cycles, only Li⁺ can intercalate into the LNCM cathode, whereas both Li⁺ and Na⁺ work together as the electrochemical cycles increase. Also the structural evolution of LNCM is examined in terms of ex situ XRD pattern at the end of various charge–discharge scans. The strong insight obtained from this study could be beneficial to the design of new layered cathode materials for future rechargeable sodium‐ion batteries.     

A Sustainable Redox‐Flow Battery with an Aluminum‐Based,Deep‐Eutectic‐Solvent Anolyte

Nonaqueous redox‐flow batteries are an emerging energy storage technology for grid storage systems, but the development of anolytes has lagged far behind that of catholytes due to the major limitations of the redox species, which exhibit relatively low solubility and inadequate redox potentials. Herein, an aluminum‐based deep‐eutectic‐solvent is investigated as an anolyte for redox‐flow batteries. The aluminum‐based deep‐eutectic solvent demonstrated a significantly enhanced concentration of circa 3.2 m in the anolyte and a relatively low redox potential of 2.2 V vs. Li⁺/Li. The electrochemical measurements highlight that a reversible volumetric capacity of 145 Ah L⁻¹ and an energy density of 189 Wh L⁻¹ or 165 Wh kg⁻¹ have been achieved when coupled with a I₃⁻/I⁻ catholyte. The prototype cell has also been extended to the use of a Br₂‐based catholyte, exhibiting a higher cell voltage with a theoretical energy density of over 200 Wh L⁻¹. The synergy of highly abundant, dendrite‐free, multi‐electron‐reaction aluminum anodes and environmentally benign deep‐eutectic‐solvent anolytes reveals great potential towards cost‐effective, sustainable redox‐flow batteries.     

Amorphous Li2O2: Chemical Synthesis and Electrochemical Properties

When aprotic Li–O₂ batteries discharge, the product phase formed in the cathode often contains two different morphologies, that is, crystalline and amorphous Li₂O₂. The morphology of Li₂O₂ impacts strongly on the electrochemical performance of Li–O₂ cells in terms of energy efficiency and rate capability. Crystalline Li₂O₂ is readily available and its properties have been studied in depth for Li–O₂ batteries. However, little is known about the amorphous Li₂O₂ because of its rarity in high purity. Herein, amorphous Li₂O₂ has been synthesized by a rapid reaction of tetramethylammonium superoxide and LiClO₄ in solution, and its amorphous nature has been confirmed by a range of techniques. Compared with its crystalline siblings, amorphous Li₂O₂ demonstrates enhanced charge‐transport properties and increased electro‐oxidation kinetics, manifesting itself a desirable discharge phase for high‐performance Li–O₂ batteries.     

Solvation Effect of Li+ on the Voltammetric Properties of [PMo12O40]3−. Part 2: Comparative Studies on the Preferential Solvation in Acetonitrile+S and Acetone+S Mixtures

For [PMo₁₂O₄₀]^3?, the presence of Li⁺ produced a two‐electron wave at nearly the same potential as the first one‐electron wave in acetonitrile or acetone. The voltammetric behavior of [PMo₁₂O₄₀]^3? in a binary mixture of acetonitrile and solvent S was compared with those in a mixture of acetone and S. When the donor number (DN) of S>20, the first two‐electron wave was converted into one‐electron waves in such binary mixtures. The conversion occurred at lower mole fractions of S in an acetonitrile+S mixture than in an acetone+S mixture. The ⁷Li NMR results showed that the preferential solvating ability of Li⁺ with S was greater in the former mixture. A linear relationship was found between the iso‐solvation point x_iso(S) and the reciprocal of the difference between the DNs of S and acetonitrile, which gave the basis to explain the anomalies observed for a mixture of acetonitrile and H₂O.     

Understanding LiOH Chemistry in a Ruthenium‐Catalyzed Li–O2 Battery

Non‐aqueous Li–O₂ batteries are promising for next‐generation energy storage. New battery chemistries based on LiOH, rather than Li₂O₂, have been recently reported in systems with added water, one using a soluble additive LiI and the other using solid Ru catalysts. Here, the focus is on the mechanism of Ru‐catalyzed LiOH chemistry. Using nuclear magnetic resonance, operando electrochemical pressure measurements, and mass spectrometry, it is shown that on discharging LiOH forms via a 4 e⁻ oxygen reduction reaction, the H in LiOH coming solely from added H₂O and the O from both O₂ and H₂O. On charging, quantitative LiOH oxidation occurs at 3.1 V, with O being trapped in a form of dimethyl sulfone in the electrolyte. Compared to Li₂O₂, LiOH formation over Ru incurs few side reactions, a critical advantage for developing a long‐lived battery. An optimized metal‐catalyst–electrolyte couple needs to be sought that aids LiOH oxidation and is stable towards attack by hydroxyl radicals.     

High-Capacity and Stable Li-O2 Batteries Enabled by a Trifunctional Soluble Redox Mediator

Li-O₂ batteries with ultrahigh theoretical energy densities usually suffer from low practical discharge capacities and inferior cycling stability owing to the cathode passivation caused by insulating discharge products and by-products. Here, a trifunctional ether-based redox mediator, 2,5-di-tert-butyl-1,4-dimethoxybenzene (DBDMB), is introduced into the electrolyte to capture reactive O₂⁻ and alleviate the rigorous oxidative environment of Li-O₂ batteries. Thanks to the strong solvation effect of DBDMB towards Li⁺ and O₂⁻, it not only reduces the formation of by-products (a high Li₂O₂ yield of 96.6 %), but also promotes the solution growth of large-sized Li₂O₂ particles, avoiding the passivation of cathode as well as enabling a large discharge capacity. Moreover, DBDMB makes the oxidization of Li₂O₂ and the decomposition of main by-products (Li₂CO₃ and LiOH) proceed in a highly effective manner, prolonging the stability of Li-O₂ batteries (243 cycles at 1000 mAh g⁻¹ and 1000 mA g⁻¹).     

Low Temperature Synthesis and Characterization of Li1.2-y NayV3O8(0≤y≤1.2) from V2O5 Gel

Without overnight heating and stirring,Li1.2V3O8 and its analogs Li1.2-y NayV3O8(0≤y≤1.2) were successfully synthesized by adding mixed solution of LiOH and NaVO3 to V2O5 gel and dehydrating the prepared gel in 150-350℃.The simplicity awards this synthesis process superiority over other low temperature synthesis routes when mass production is concerned.TG-DTA,XRD and TEM experiments were carried out for physical characterization.By galvanostatic charge-discharge and cyclic voltammetry tests,these products showed better electrochemical performance than high temperature products as cathode active materials in secondary lithium batteries.After treatment of Li1.2V3O8 at 250℃,it exhibited a capacity of 350mAh/g when cycled at current rate of about 60 mA/g over the voltage range of 3.8-1.7V vs,Li^ /Li.The influence of partial substitution of Li by Na was also extensively studied.     

DABCOnium: An Efficient and High‐Voltage Stable Singlet Oxygen Quencher for Metal–O2 Cells

Singlet oxygen (¹O₂) causes a major fraction of the parasitic chemistry during the cycling of non‐aqueous alkali metal‐O₂ batteries and also contributes to interfacial reactivity of transition‐metal oxide intercalation compounds. We introduce DABCOnium, the mono alkylated form of 1,4‐diazabicyclo[2.2.2]octane (DABCO), as an efficient ¹O₂ quencher with an unusually high oxidative stability of ca. 4.2 V vs. Li/Li⁺. Previous quenchers are strongly Lewis basic amines with too low oxidative stability. DABCOnium is an ionic liquid, non‐volatile, highly soluble in the electrolyte, stable against superoxide and peroxide, and compatible with lithium metal. The electrochemical stability covers the required range for metal–O₂ batteries and greatly reduces ¹O₂ related parasitic chemistry as demonstrated for the Li–O₂ cell.     

Synthesis and crystal structure of 2‐amino‐3‐hydroxypyridinium dioxido(pyridine‐2,6‐dicarboxylato‐κ3O2,N,O6)vanadate(V) and its conversion to nanostructured V2O5

2‐Amino‐3‐hydroxypyridinium dioxido(pyridine‐2,6‐dicarboxylato‐κ³O²,N,O⁶)vanadate(V), (C₅H₇N₂O)[V(C₇H₃NO₄)O₂] or [H(amino‐3‐OH‐py)][VO₂(dipic)], (I), was prepared by the reaction of VCl₃ with dipicolinic acid (dipicH₂) and 2‐amino‐3‐hydroxypyridine (amino‐3‐OH‐py) in water. The compound was characterized by elemental analysis, IR spectroscopy and X‐ray structure analysis, and consists of an anionic [VO₂(dipic)]⁻ complex and an H(amino‐3‐OH‐py)⁺ counter‐cation. The V^V ion is five‐coordinated by one O,N,O′‐tridentate dipic dianionic ligand and by two oxide ligands. Thermal decomposition of (I) in the presence of polyethylene glycol led to the formation of nanoparticles of V₂O₅. Powder X‐ray diffraction (PXRD) and scanning electron microscopy (SEM) were used to characterize the structure and morphology of the synthesized powder.     

Effect of Cation Size on Solvation and Association with Superoxide Anion in Aprotic Solvents

Influence of cation size on solvation strength, diffusion, and kinetics of the association reaction with anions O₂⁻ in aprotic solvents, such as acetonitrile and dimethyl sulfoxide, has been investigated by means of molecular dynamics simulations. The work is motivated by the need to understand the molecular nature of the solvent-induced changes in capacity of Li-air batteries. We have shown that the dependence of the solvation shell stability on the cation size has a maximum at a particular ion radius that corresponds to a solvent coordination number of 4. The shell stability maximum coincides with the diffusion coefficient minimum. The variation of the cation shell stability has a crucial impact on the kinetics of the cation-O₂⁻ association. We have demonstrated that profound inhibition of the association reaction for Li⁺ in dimethyl sulfoxide is a result of the lock-and-key effect that cannot be described in the framework of Hard Soft Acid Base theory.     

Electrochemical Oxidation of Lithium Carbonate Generates Singlet Oxygen

Solid alkali metal carbonates are universal passivation layer components of intercalation battery materials and common side products in metal‐O₂ batteries, and are believed to form and decompose reversibly in metal‐O₂/CO₂ cells. In these cathodes, Li₂CO₃ decomposes to CO₂ when exposed to potentials above 3.8 V vs. Li/Li⁺. However, O₂ evolution, as would be expected according to the decomposition reaction 2 Li₂CO₃→4 Li⁺+4 e^?+2 CO₂+O₂, is not detected. O atoms are thus unaccounted for, which was previously ascribed to unidentified parasitic reactions. Here, we show that highly reactive singlet oxygen (¹O₂) forms upon oxidizing Li₂CO₃ in an aprotic electrolyte and therefore does not evolve as O₂. These results have substantial implications for the long‐term cyclability of batteries: they underpin the importance of avoiding ¹O₂ in metal‐O₂ batteries, question the possibility of a reversible metal‐O₂/CO₂ battery based on a carbonate discharge product, and help explain the interfacial reactivity of transition‐metal cathodes with residual Li₂CO₃.     

Halogen,hydrogen and electrostatic interactions in 2‐amino‐5‐chloro‐1,3‐benzoxazol‐3‐ium nitrate and 2‐amino‐5‐chloro‐1,3‐benzoxazol‐3‐ium perchlorate

In the title compounds, C₇H₆ClN₂O⁺·NO₃⁻ and C₇H₆ClN₂O⁺·ClO₄⁻, the ions are connected by N—H...O hydrogen bonds and halogen interactions. Additionally, in the first compound, co‐operative π–π stacking and halogen...π interactions are observed. The energies of the observed interactions range from a value typical for very weak interactions (1.80 kJ mol⁻¹) to one typical for mildly strong interactions (53.01 kJ mol⁻¹). The iminium cations exist in an equilibrium form intermediate between exo‐ and endocyclic. This study provides structural insights relevant to the biochemical activity of 2‐amino‐5‐chloro‐1,3‐benzoxazole compounds.     

catena‐Poly­[[di­aqua­lithium(I)]‐μ‐[9H‐purine‐2,6(1H,3H)‐dionato‐O2:N7]]

In the title compound, [Li(C₅H₃N₄O₂)(H₂O)₂]_n, the coordinate geometry about the Li⁺ ion is distorted tetrahedral and the Li⁺ ion is bonded to N and O atoms of adjacent ligand mol­ecules forming an infinite polymeric chain with Li—O and Li—N bond lengths of 1.901 (5) and 2.043 (6) Å, respectively. Tetrahedral coordination at the Li⁺ ion is completed by two cis water mol­ecules [Li—O 1.985 (6) and 1.946 (6) Å]. The crystal structure is stabilized both by the polymeric structure and by a hydrogen‐bond network involving N—H?O, O—H?O and O—H?N hydrogen bonds.