Temperature‐Driven Planar Chirality Switching of a Pillar[5]arene‐Based Molecular Universal Joint

The study of an enantiopure bicyclic pillar[5]arene‐based molecular universal joint (MUJ) by single‐crystal X‐ray diffraction allowed for the first time the unequivocal assignment of the absolute configuration of a planar chiral pillar[5]arene by circular dichroism spectroscopy. Crucially, the absolute configuration of the MUJ was switched reversibly by temperature, with an accompanying sign inversion of the anisotropy factor that varied by as much as 0.03, which is the largest value ever reported. Mechanistically, the reversible chirality switching of the MUJ is driven by the threading/dethreading motion of the fused ring and hence is dependent on both the size and nature of the ring and the solvent employed, reflecting the critical balance between the self‐complexation of the ring by pillar[5]arene, the solvation to the excluded ring, and the inclusion of solvent molecules in the cavity.     

Chiroptical switching of molecular universal joint triggered by complexation/release of a cation: A stepwise synergistic complexation

Pillar[5]arene-based molecular universal joints(MUJs), bearing fused crown ether subring(MUJ1 and MUJ3) or a ring without ether oxygen atom(MUJ2), were synthesized and enantio–differentiated. Significant chiral inversion was observed for the crown ether-fused MUJs upon the addition of equivalent cations Na+, showing an anisotropy(g) factor of 0.014, while alkyl subring-fused MUJ2 showed no CD inversions. Unprecedentedly, sodium ion triggered rolling-in motion of the subring to the pillar[5]arene...     

Dynamic-to-Static Planar Chirality Conversion in Pillar[5]arenes Regulated by Guest Solvents or Amplified by Crystallization

Controlling dynamic chirality and memorizing the controlled chirality are important. Chirality memory has mainly been achieved using noncovalent interactions. However, in many cases, the memorized chirality arising from noncovalent interactions is erased by changing the conditions such as the solvent and temperature. In this study, the dynamic planar chirality of pillar[5]arenes was successfully converted into static planar chirality by introducing bulky groups through covalent bonds. Before introducing the bulky groups, pillar[5]arene with stereogenic carbon atoms at both rims existed as a pair of diastereomers, and thus showed planar chiral inversion that was dependent on the chain length of the guest solvent. The pS and pR forms, regulated by guest solvents, were both diastereomerically memorized by introducing bulky groups. Furthermore, the diastereomeric excess was amplified by crystallization of the pillar[5]arene. The subsequent introduction of bulky groups yielded pillar[5]arene with an excellent diastereomeric excess (95 % de).     

Water-soluble pillar[4]arene[1]quinone: Synthesis,host-guest property and application in the fluorescence turn-on sensing of ethylenediamine in aqueous solution,organic solvent and air

Water-soluble pillar[5]arenes are a class of typical macrocycles and have aroused tremendous attention for its easy to modify, abundant host-guest properties and extensive applications. However, up to now, all the reported water-soluble pillar[5]arenes acted as the host molecules, whereas they failed to be postsynthetically modified, which seriously impeded the development of the pillar[5]arene-based supramolecular chemistry. In this work, a new water-soluble pillar[5]arene, pillar[4]arene[1]quinone, was designed and synthsized with eight quaternary ammonium groups as well as a quinone units. Such a new water-soluble pillar[4]arene[1]quinone was capable of forming 1:1 stable complex with sodium 1-octanesulfonate in aqueous solution. Since the 1,4-quinone unit of WP[4]Q[1] could react with ethylenediamine (EDA) to form a conjugated quinoxaline structure, so pillar[4]arene[1]quinone could apply to the facile fluorescence turn-on sensing of EDA in aqueous solution, organic solvent and air.     

Monofunctionalized pillar[5]arenes: synthesis and supramolecular structure

The first synthesis of a monohydroxy pillar[5]arene has been carried out, by controlling the de-O-methylation of per-methylated pillar[5]arene. Using monohydroxy pillar[5]arene as an intermediate, mono-guest-functionalized pillar[5]arene was prepared. It formed a self-inclusion complex in CDCl(3) whereas in acetone-d(6) dethreading of the guest moiety took place.     

Separation of Linear and Branched Alkanes Using Host–Guest Complexation of Cyclic and Branched Alkane Vapors by Crystal State Pillar[6]arene

Activated crystals of pillar[6]arene produced by removing the solvent upon heating were able to take up branched and cyclic alkane vapors as a consequence of their gate‐opening behavior. The uptake of branched and cyclic alkane vapors by the activated crystals of pillar[6]arene induced a crystal transformation to form one‐dimensional channel structures. However, the activated crystals of pillar[6]arene hardly took up linear alkane vapors because the cavity size of pillar[6]arene is too large to form stable complexes with linear alkanes. This shape‐selective uptake behavior of pillar[6]arene was further utilized for improving the research octane number of an alkane mixture of isooctane and n‐heptane: interestingly, the research octane number was dramatically improved from a low research octane number (17 %) to a high research octane number (>99 %) using the activated crystals of pillar[6]arene.     

Metal-organic supramolecular nanoarchitectures by Ru(Ⅱ)bis-(terpyridine)-bridged pillar[5]arene dimers with triphenylamine

A metal-organic photoinduced electron transfer(PET) supramolecular nanoarchitecture comprised of Ru(Ⅱ) bis(terpyridine)-modified pillar[5]arene(electron acceptor) and triazole triphenylamine amyl cyanide(electron donor) has been designed and constructed.Through the comparison of diverse solvents and acceptors,the two conditions,i.e.,modification of pillar[5]arene to donor and weak polar solvent are benefit for the occurrence of "efficient PET" because of shorter D-A distance in the presence of pillar[5]arene.Crucially,the fluorescence and PET process of the supramolecular assembly could be further modulated by solvent conversion and another competitive guest.The study provides a supramolecular method to design and construct tunable PET systems and PET-based smart materials.     

Redox-Triggered Chirality Switching and Guest-Capture/Release with a Pillar[6]arene-Based Molecular Universal Joint

A chiral electrochemically responsive molecular universal joint (EMUJ) was synthesized by fusing a macrocyclic pillar[6]arene (P[6]) to a ferrocene-based side ring. A single crystal of an enantiopure EMUJ was successfully obtained, which allowed, for the first time, the definitive correlation between the absolute configuration and the circular dichroism spectrum of a P[6] derivative to be determined. The self-inclusion and self-exclusion conformational change of the EMUJ led to a chiroptical inversion of the P[6] moiety, which could be manipulated by both solvents and changes in temperature. The EMUJ also displayed a unique redox-triggered reversible in/out conformational switching, corresponding to an occupation/voidance switching of the P[6] cavity, respectively. This phenomenon is an unprecedented electrochemical manipulation of the capture and release of guest molecules by supramolecular hosts.     

Redox‐Triggered Chirality Switching and Guest‐Capture/Release with a Pillar[6]arene‐Based Molecular Universal Joint

A chiral electrochemically responsive molecular universal joint (EMUJ) was synthesized by fusing a macrocyclic pillar[6]arene (P[6]) to a ferrocene‐based side ring. A single crystal of an enantiopure EMUJ was successfully obtained, which allowed, for the first time, the definitive correlation between the absolute configuration and the circular dichroism spectrum of a P[6] derivative to be determined. The self‐inclusion and self‐exclusion conformational change of the EMUJ led to a chiroptical inversion of the P[6] moiety, which could be manipulated by both solvents and changes in temperature. The EMUJ also displayed a unique redox‐triggered reversible in/out conformational switching, corresponding to an occupation/voidance switching of the P[6] cavity, respectively. This phenomenon is an unprecedented electrochemical manipulation of the capture and release of guest molecules by supramolecular hosts.     

Selective complexation of n-alkanes with pillar[5]arene dimers in organic media

A pillar[5]arene dimer was synthesized by linking a mono-hydroxylated pillar[5]arene with 1,4-bis(bromomethyl)benzene. The pillar[5]arene dimer formed stronger complexes with n-alkanes than did a monomeric pillar[5]arene.     

A Diaminopillar[5]arene-Based Macrobicyclic Molecule: Synthesis,Characterization and A Lock–Key Story

A new macrobicyclic molecule ( BC-DAP5 ), consisting of a diaminopillar[5]arene cavity and a fused ring, was successfully constructed using a Grubbs metathesis reaction. Further studies indicated that BC-DAP5 possessed a unique molecular behavior, showing a response to acid/base stimuli. In BC-DAP5 , protons (acid) acted as a lock, locking the fused ring out of the cavity (pillar[5]arene), and a base served as the key, making the fused ring switch in or out freely. Reversible control of the molecular behavior was achieved simply by adding acid and base alternately.     

Novel [2]pseudorotaxanes constructed by self-assembly of bis-urea-functionalized pillar[5]arene and linear alkyl dicarboxylates

A bis-urea-functionalized pillar[5]arene has been synthesized and shown to form [2]pseudorotaxanes spontaneously with linear alkyl dicarboxylates in highly polar solvent DMSO, in which the hydrogen bonding interactions between the bis-urea hydrogens and dicarboxylate oxygens play an important role in stabilizing the novel [2]pseudorotaxanes alongside C-Hπ interactions.     

Comparison of pillar[5]arene and calix[4]arene anion receptor ability in aqueous media

Abstract

Recognition ability of both cationic pillar[5]arene and calix[4]arene has been studied in aqueous media. Anion complexation can be evaluated from their ability to complex their counterions as well as an added external organic anion. DOSY NMR experiments and fluorescence quenching show that pillararenes have a larger ability for including their own counterions than calixarenes irrespective of the anion (tetrafluoroborate or chloride or bromide) and the structure of the cationic moiety (trimethylammonium or methylimidazolium). Counterion complexation shows a picture where four to five positive charges of the pillar[5]arene are neutralised, meanwhile only one positive charge of the calixarene is neutralised for a 1 mM solution of the macrocycle. Irrespective of the smaller net positive charge in the pillar[5]arene, its binding ability for organic anions (toluenesulfonate or hydroxybenzoate) is larger than for calix[4]arene allowing a better accommodation of the guest in its cavity. The larger separation between the cationic groups of the receptor and its electron-rich aromatic region improves the anion recognition ability for pillar[5]arene.     

para-Bridged symmetrical pillar[5]arenes: their Lewis acid catalyzed synthesis and host-guest property

Condensation of 1,4-dimethoxybenzene (DMB) with paraformaldehyde in the presence of BF3.O(C2H5)2 gave novel para-bridged pentacyclic pillar DMB (DMpillar[5]arene). Moreover, para-bridged pentacyclic hydroquinone (pillar[5]arene) was prepared. Pillar[5]arene formed 1:1 host-guest complexes with dialkyl viologen and alkyl pyridinium derivatives. However, pillar[5]arene did not form complexes with the diadamantyl viologen derivative since a bulky adamantyl group was unable to thread the cavity of pillar[5]arene.     

Self-assembly of [2]pseudorotaxanes based on pillar[5]arene and bis(imidazolium) cations

A simple bis(imidazolium) dication, 1,4-bis[N-(N'-hydroimidazolium)]butane, can act as a new template for formation of [2]pseudorotaxane with pillar[5]arene, in which the dethreading/rethreading process can be controlled by addition of base and acid. The effect on the association constant of both the solvent and counterion is also described.     

Syntheses of a pillar[4]arene[1]quinone and a difunctionalized pillar[5]arene by partial oxidation

A pillar[4]arene[1]quinone and a difunctionalized pillar[5]arene have been synthesized by partial oxidation.     

Construction of [1]rotaxanes with pillar[5]arene as the wheel and terpyridine as the stopper

The condensation reaction ofω-aminoalkyleneamide-functionalized pillar[5]arenes with 2-(4-([2,2’:6’,2〃-terpyridin]-4’-yl)phenoxy)acetic acid or 4-(4-([2,2’:6’,2"-terpyridin]-4’-yl)phenoxy)butanoic acid in dry chloroform at room temperature under the catalysis of HOBT/EDCl resulted in novel pillar[5]arene diamido-bridged terpyridine derivatives.~1 H NMR and 2 D NOESY spectra clearly indicated that the interesting[1]rotaxanes were formed by longer alkylene such as propylene,butylene and hexylenediamido chains threading into the cavity of the pillar[5]arene and with larger terpyridine acting as the stopper.However,the shorter ethylenediamido chain only exists outer of cavity of pillar[5]arene and the molecule exist on free form.     

Synthesis and X-ray crystal structure of a difunctionalized pillar[5]arene at A1/B2 positions by in situ cyclization and deprotection

The reaction of 1,4-dimethoxybenzene and paraformaldehyde using AlBr(3) yields multiple-deprotected pillar[5]arenes. A1/B2 di-deprotected pillar[5]arene can be isolated by silica gel chromatography and washing procedures. The X-ray structure and polymerization of the A1/B2 di-deprotected pillar[5]arene are reported.     

Construction of unique pseudo[1]rotaxanes and [1]rotaxanes based on mono-functionalized pillar[5]arene Schiff bases

Journal of Inclusion Phenomena and Macrocyclic Chemistry - A series of mono-functionalized pillar[5]arene Schiff bases were successfully synthesized by amidation reaction of pillar[5]arene...     

Facile, rapid, and high-yield synthesis of pillar[5]arene from commercially available reagents and its X-ray crystal structure

We monitored the progress of formation of dimethoxypillar[5]arene by size-exclusion chromatography. Surprisingly, the cyclization reaction completely finished in just 3 min. By improving the reaction conditions and purification process, we successfully obtained dimethoxypillar[5]arene in a short time and in high yield (71%) from commercially available reagents. By improving the deprotection reaction of the methoxy moieties, pillar[5]arene was isolated quantitatively. Single crystal X-ray analysis confirmed the structure of pillar[5]arene in the solid state.