MHD flow and heat transfer over a radially stretching/shrinking disk

A steady magnetohydrodynamic (MHD) flow past a radially stretching or shrinking disk is investigated. The governing partial differential equations are transformed into a set of ordinary (similarity) differential equations by a similarity transformation. These equations along with the corresponding boundary conditions are solved numerically using the boundary value problem solver (bvp4c) in Matlab. The effects of magnetic field and suction on the shear stress and the heat transfer are analyzed and discussed. It is found that both parameters affect more in the shrinking region. The increase in the magnetic parameter results in the increase of the skin friction coefficient but decrease in the local Nusselt number.The skin friction coefficient and the local Nusselt number increase as suction increases.     

Magnetohydrodynamics (MHD) axisymmetric flow and heat transfer of a hybrid nanofluid past a radially permeable stretching/shrinking sheet with Joule heating

The main interest of the present work is to fundamentally investigate the flow characteristics and heat transfer of a hybrid Cu-Al₂O₃/water nanofluid due to a radially stretching/shrinking surface with the mutual effects of MHD, suction and Joule heating. The surface is permeable to physically allow the wall mass fluid suction. Tiwari and Das model of nanofluid is used with the new thermophysical properties of hybrid nanofluid to represent the problem. A similarity transformation is adopted to convert the governing model (PDEs) into a nonlinear set of ordinary differential equations (ODEs). A bvp4c solver in MATLAB software is employed to numerically compute the transformed system. The numerical results are discussed and graphically manifested in velocity and temperature profiles, as well as the skin friction coefficient and heat transfer rate with the pertinent values of the dimensionless parameters namely magnetic, Cu volume fraction, suction and Eckert number. The Eckert number has no impact on the boundary layer separation while the higher value of the suction parameter may affect the heat transfer performance. The presence of dual solutions (first and second) is seen on all the profiles within a limited range of the physical parameters. The stability analysis is executed, and it is validated that the first solution is the real solution.     

Series solution of hydromagnetic flow and heat transfer with Hall effect in a second grade fluid over a stretching sheet

We examine the problem of flow and heat transfer in a second grade fluid over a stretching sheet [K. Vajravelu, T. Roper, Int. J. Nonlinear Mech. 34, 1031 (1999)]. The equations considered by Vajravelu and Roper [K. Vajravelu, T. Roper, Int. J. Nonlinear Mech. 34, 1031 (1999)], are found to be incorrect in the literature. In this paper, we not only corrected the equation but found a useful analytic solution to this important problem. We also extended the problem for hydromagnetic flow and heat transfer with Hall effect. The explicit analytic homotopy solution for the velocity field and heat transfer are presented. Graphs for the velocity field, skin friction coefficient, and rate of heat transfer are presented. Tables for the skin friction coefficient and rate of heat transfer are also presented. The convergence of the solution is also properly checked and discussed.     

Variable fluid properties and variable heat flux effects on the flow and heat transfer in a non-Newtonian Maxwell fluid over an unsteady stretching sheet with slip velocity

The effects of variable fluid properties and variable heat flux on the flow and heat transfer of a non-Newtonian Maxwell fluid over an unsteady stretching sheet in the presence of slip velocity have been studied. The governing differential equations are transformed into a set of coupled non-linear ordinary differential equations and then solved with a numerical technique using appropriate boundary conditions for various physical parameters. The numerical solution for the governing non-linear boundary value problem is based on applying the fourth-order Runge-Kutta method coupled with the shooting technique over the entire range of physical parameters. The effects of various parameters like the viscosity parameter, thermal conductivity parameter, unsteadiness parameter, slip velocity parameter, the Deborah number, and the Prandtl number on the flow and temperature profiles as well as on the local skin-friction coefficient and the local Nusselt number are presented and discussed. Comparison of numerical results is made with the earlier published results under limiting cases.     

Variable viscosity and thermal conductivity effects on MHD flow and heat transfer in viscoelastic fluid over a stretching sheet

The problem of flow and heat transfer of an electrically conducting viscoelastic fluid over a continuously stretching sheet in the presence of a uniform magnetic field is analyzed for the case of power-law variation in the sheet temperature. The fluid viscosity and thermal conductivity are assumed to vary as a function of temperature. The basic equations comprising the balance laws of mass, linear momentum, and energy modified to include the electromagnetic force effect, the viscous dissipation, internal heat generation or absorption and work due to deformation are solved numerically.     

Thermal radiation and slip effects on MHD stagnation point flow of nanofluid over a stretching sheet

Present model is devoted for the stagnation point flow of nanofluid with magneto-hydrodynamics (MHD) and thermal radiation effects passed over a stretching sheet. Moreover, we have considered the combined effects of velocity and thermal slip. Condition of zero normal flux of nanoparticles at the wall for the stretched flow phenomena is yet to be explored in the literature. Convinced partial differential equations of the model are transformed into the system of coupled nonlinear differential equations and then solved numerically. Graphical results are plotted for velocity, temperature and nanoparticle concentration for various values of emerging parameters. Variation of stream lines, skin friction coefficient, local Nusselt and Sherwood number are displayed along with the effective parameters. Final conclusion has been drawn on the basis of both numerical and graphs results.     

Exact solutions for magnetohydrodynamic nanofluids flow and heat transfer over a permeable axisymmetric radially stretching/shrinking sheet

We report on the magnetohydrodynamic impact on the axisymmetric flow of Al₂O₃/Cu nanoparticles suspended in H₂O past a stretched/shrinked sheet. With the use of partial differential equations and the corresponding thermophysical characteristics of nanoparticles, the physical flow process is illustrated. The resultant nonlinear system of partial differential equations is converted into a system of ordinary differential equations using the suitable similarity trans...     

MHD flow of nanofluids over an exponentially stretching sheet in a porous medium with convective boundary conditions

This article concentrates on the steady magnetohydrodynamic(MHD) flow of viscous nanofluid. The flow is caused by a permeable exponentially stretching surface. An incompressible fluid fills the porous space. A comparative study is made for the nanoparticles namely Copper(Cu), Silver(Ag), Alumina(Al2O3) and Titanium Oxide(TiO2). Water is treated as a base fluid. Convective type boundary conditions are employed in modeling the heat transfer process. The non-linear partial differential equations governing the flow are reduced to an ordinary differential equation by similarity transformations. The obtained equations are then solved for the development of series solutions. Convergence of the obtained series solutions is explicitly discussed. The effects of different parameters on the velocity and temperature profiles are shown and analyzed through graphs.     

Casson fluid flow and heat transfer over a nonlinearly stretching surface

A boundary layer analysis is presented for non-Newtonian fluid flow and heat transfer over a nonlinearly stretching surface. The Casson fluid model is used to characterize the non-Newtonian fluid behavior. By using suitable transformations, the governing partial differential equations corresponding to the momentum and energy equations are converted into non-linear ordinary differential equations. Numerical solutions of these equations are obtained with the shooting method. The effect of increasing Casson parameter is to suppress the velocity field. However the temperature is enhanced with the increasing Casson parameter.     

Numerical study of the onset of chemical reaction and heat source on dissipative MHD stagnation point flow of Casson nanofluid over a nonlinear stretching sheet with velocity slip and convective boundary conditions

The magnetohydrodynamic (MHD) stagnation point flow of Casson nanofluid over a nonlinear stretching sheet in the presence of velocity slip and convective boundary condition is examined. In this analysis, various effects such as velocity ratio, viscous dissipation, heat generation/absorption and chemical reaction are accentuated. Possessions of Brownian motion and thermophoresis are also depicted in this study. A uniform magnetic field as well as suction is taken into account. Suitable similarity transformations are availed to convert the governing nonlinear partial differential equations to a system of nonlinear ordinary differential equations and then series solutions are secured using a homotopy analysis method (HAM). Notable accuracy of the present results has been obtained with the earlier results. Impact of distinct parameters on velocity, temperature, concentration, skin friction coefficient,Nusselt number and Sherwood number is canvassed through graphs and tabular forms.     

Unsteady MHD flow and heat transfer near stagnation point over a stretching/shrinking sheet in porous medium filled with a nanofluid

In this article, the unsteady magnetohydrodynamic （MHD） stagnation point flow and heat transfer of a nanofluid over a stretching/shrinking sheet is investigated numerically. The similarity solution is used to reduce the governing system of partial differential equations to a set of nonlinear ordinary differential equations which are then solved numerically using the fourth-order Runge-Kutta method with shooting technique. The ambient fluid velocity, stretching/shrinking velocity of sheet, and the wall temperature are assumed to vary linearly with the distance from the stagnation point. To investigate the influence of various pertinent parameters, graphical results for the local Nusselt number, the skin friction coefficient, velocity profile, and temperature profile are presented for different values of the governing parameters for three types of nanoparticles, namely copper, alumina, and titania in the water-based fluid. It is found that the dual solution exists for the decelerating flow. Numerical results show that the extent of the dual solution domain increases with the increases of velocity ratio, magnetic parameter, and permeability parameter whereas it remains constant as the value of solid volume fraction of nanoparticles changes. Also, it is found that permeability parameter has a greater effect on the flow and heat transfer of a nanofluid than the magnetic parameter.     

Hall effect on Hartmann flow and heat transfer of a Burgers' fluid

The effect of Hall current on the steady magnetohydrodynamics (MHD) flow of an electrically conducting, incompressible Burgers' fluid between two parallel electrically insulating infinite planes is studied. The MHD flow is generated by applying constant pressure gradient. An external uniform magnetic field normal to the disks is applied. The disks are kept at two different constant temperatures. Exact solutions are obtained for the governing momentum and energy equations. The effects of Hartmann number M, Reynolds number Re, Prandtl number Pr, Eckert number Ec, pressure gradient dp/dx and Hall parameter η are examined.     

Convective heat transfer and MHD effects on Casson nanofluid flow over a shrinking sheet

Current study examines the magnetohydrodynamic (MHD) boundary layer flow of a Casson nanofluid over an exponentially permeable shrinking sheet with convective boundary condition. Moreover, we have considered the suction/injection effects on the wall. By applying the appropriate transformations, system of non-linear partial differential equation along with the boundary conditions are transformed to couple non-linear ordinary differential equations. The resulting systems of non-linear ordinary differential equations are solved numerically using Runge-Kutta method. Numerical results for velocity, temperature and nanoparticle volume concentration are presented through graphs for various values of dimensionless parameters. Effects of parameters for heat transfer at wall and nanoparticle volume concentration are also presented through graphs and tables. At the end, fluid flow behavior is examined through stream lines. Concluding remarks are provided for the whole analysis.     

Stability analysis of unsteady MHD stagnation point flow and heat transfer over a shrinking sheet in the presence of viscous dissipation

The unsteady MHD stagnation-point flow and heat transfer over a shrinking sheet was carried out. This study also was conducted in the existence of suction and viscous dissipation. In order to convert the governing partial differential equations to an ordinary differential equation, an appropriate similarity transformation was applied in this study. Then, the resulting equations are worked out by Bvp4c solver in Matlab. The impacts of the parameters involved in this study towards skin friction, Nusselt number, velocity and temperature profile are showed graphically and thoroughly discussed. Remarkably, there were dual solutions present in this study which made us continue deeper in performing the stability analysis. As expected, our study proves that the solution is stable only in the first one while not in the second solution.     

Thermophysical effects of carbon nanotubes on MHD flow over a stretching surface

This article is intended for investigating the effects of magnetohydrodynamics (MHD) and volume fraction of carbon nanotubes (CNTs) on the flow and heat transfer in two lateral directions over a stretching sheet. For this purpose, three types of base fluids specifically water, ethylene glycol and engine oil with single and multi-walled carbon nanotubes are used in the analysis. The convective boundary condition in the presence of CNTs is presented first time and not been explored so far. The transformed nonlinear differential equations are solved by the Runge–Kutta–Fehlberg method with a shooting technique. The dimensionless velocity and shear stress are obtained in both directions. The dimensionless heat transfer is determined on the surface. Three different models of thermal conductivity are comparable for both CNTs and it is found that the Xue [1] model gives the best approach to guess the superb thermal conductivity in comparison with the Maxwell [2] and Hamilton and Crosser [3] models. And finally, another finding suggests the engine oil provides the highest skin friction and heat transfer rates.     

Effect of Joule heating on current-induced asymmetries and breakdown of the quantum Hall effect in narrow Hall bars

Recent low-temperature scanning-force-microscopy experiments on narrow Hall bars, under the conditions of the integer quantum Hall effect (IQHE) and its breakdown, have revealed an interesting position dependence of the Hall potential, which changes drastically with the applied magnetic field and the strength of the imposed current through the sample. The present paper shows, that inclusion of Joule heating into an existing self-consistent theory of screening and magneto-transport, which assumes translation invariant Hall bars with a homogeneous background charge due to doping, can explain the experimental results on the breakdown of the IQHE in the so called edge-dominated regime.     

Role of radial magnetic field on heat transfer in MHD Couette flow in an annulus with viscous and Joule dissipation

This paper presents an analytical investigation of steady, fully developed MHD Couette flow of viscous, incompressible, electrically conducting fluid in the presence of radial magnetic field. Exact solutions are derived for the governing energy and momentum equations by taking into account the effects of viscous and Joule dissipations under relevant boundary conditions. The solutions obtained are graphically represented and the effects of various controlling parameters such as Hartmann number and Brinkman number on the temperature profile and consequently the Nusselt numbers are discussed. The significant result from the study is that increase in Hartmann number leads to enhancement on the Nusselt number at outer surface of inner cylinder while the role of Hartmann number is just reverse on Nusselt number at inner surface of outer cylinder. In addition, the Brinkman number has an insignificant effect on the Nusselt numbers when both surfaces are kept at equal temperature.     

Soret and Dufour effects on MHD non-Darcian mixed convection heat and mass transfer over a stretching sheet with non-uniform heat source/sink

An analysis has been carried out to study the effects of thermal-diffusion and diffusion-thermo on non-Darcian mixed convection heat and mass transfer of an incompressible, electrically conducting fluid over a stretching sheet embedded in a porous medium in the presence of an external magnetic field and non-uniform heat source/sink. Similarity transformations are used to convert highly non-linear partial differential equations into ordinary differential equations. Similarity equations are then solved numerically using shooting algorithm with Runge-Kutta-Fehlberg scheme over the entire range of physical parameters. The effects of various physical parameters on the dimensionless velocity, temperature and concentration profiles are depicted graphically. Present results are compared with previously published work on various special cases of the problem and the results are found to be in very good agreement. Numerical results for local skin-friction, local Nusselt number and local Sherwood number are tabulated for different physical parameters.     

Effect of the ion slip on the MHD flow of a dusty fluid with heat transfer under exponential decaying pressure gradient

In the present study, the unsteady Hartmann flow with heat transfer of a dusty viscous incompressible electrically conducting fluid under the influence of an exponentially decreasing pressure gradient is studied without neglecting the ion slip. The parallel plates are assumed to be porous and subjected to a uniform suction from above and injection from below while the fluid is acted upon by an external uniform magnetic field applied perpendicular to the plates. The equations of motion are solved analytically to yield the velocity distributions for both the fluid and dust particles. The energy equations for both the fluid and dust particles including the viscous and Joule dissipation terms, are solved numerically using finite differences to get the temperature distributions.     

Joule heating and viscous dissipation effects on MHD flow past a semi-infinite inclined plate with variable surface temperature

A numerical investigation is performed to study the MHD free convection flow past a semi-infinite inclined plate subjected to a variable surface temperature. The Joule heating and viscous dissipation effects are taken into account in the energy equation. The governing equations of the flow are transformed into a nondimensional form using suitable dimensionless quantities. A fully developed implicit finite-difference scheme of Crank-Nicolson type is engaged to solve the dimensionless governing equations, which is more accurate, fast convergent, and unconditionally stable. The effects of the MHD, inclination angle, power law, Grashof number, Prandtl number, Joule heating, and viscous dissipation effects are studied on the velocity, temperature, shear stress, and heat transfer coefficients during transient periods. It is observed that the MHD has retarding effects on velocity.