Quantum mechanics/molecular mechanics electrostatic embedding with continuous and discrete functions

A quantum mechanics/molecular mechanics (QM/MM) implementation that uses the Gaussian electrostatic model (GEM) as the MM force field is presented. GEM relies on the reproduction of electronic density by using auxiliary basis sets to calculate each component of the intermolecular interaction. This hybrid method has been used, along with a conventional QM/MM (point charges) method, to determine the polarization on the QM subsystem by the MM environment in QM/MM calculations on 10 individual H(2)O dimers and a Mg(2+)-H(2)O dimer. We observe that GEM gives the correct polarization response in cases when the MM fragment has a small charge, while the point charges produce significant over-polarization of the QM subsystem and in several cases present an opposite sign for the polarization contribution. In the case when a large charge is located in the MM subsystem, for example, the Mg(2+) ion, the opposite is observed at small distances. However, this is overcome by the use of a damped Hermite charge, which provides the correct polarization response.     

Interactions between phosphate and water in solution: a natural bond orbital based analysis in a QM/MM framework

The natural bond orbital (NBO) and natural energy decomposition analysis (NEDA) calculations are used to analyze the interaction between mono-methyl phosphate-ester (MMP) and its solvation environment in a combined quantum mechanical/molecular mechanical (QM/MM) framework. The solute-solvent configurations are generated using a specific parametrization of the self-consistent-charge density functional tight-binding (SCC-DFTB) model for the MMP and TIP3P for water. The NBO and NEDA calculations are done with several QM/MM partitioning schemes with HF/6-31+G** as the QM level. Regardless of the size of the QM region, a notable amount of charge transfer is observed between MMP and the neighboring water molecules and the charge-transfer interactions are, in the NEDA framework, as important as the electric (electrostatic and polarization) components. This work illustrates that NBO based analyses are effective tools for probing intermolecular interactions in condensed phase systems.     

Toward a consistent treatment of polarization in model QM/MM calculations

The concept of model chemistries within hybrid QM/MM calculations has been addressed through analysis of the polarization energy determined by two distinct approaches based on (i) induced charges and (ii) induced dipoles. The quantum mechanical polarization energy for four configurations of the water dimer has been determined for a range of basis sets using Morokuma energy decomposition analysis. This benchmark value has been compared to the fully classical polarization energy determined using the induced dipole approach, and the molecular mechanics polarization energy calculated using induced charges within the MM region of hybrid QM/MM calculations. From the water dimer calculations, it is concluded that the induced charge approach is consistent with medium sized basis set calculations whereas the induced dipole approach is consistent with large basis set calculations. This result is highly relevant to the concept of QM/MM model chemistries.     

Flexible-boundary QM/MM calculations: II. Partial charge transfer across the QM/MM boundary that passes through a covalent bond

Recently, based on the principle of electronic chemical potential equalization and the principle of charge conservation, we proposed a flexible-boundary scheme that allows both partial charge transfer and self-consistent polarization between the quantum mechanical (QM) and molecular mechanical (MM) subsystems in QM/MM calculations; the scheme was applied to study the atomic charges in selected ion–solvent complexes. In the present contribution, we further extend the flexible-boundary treatment to handle the QM/MM boundary passing through covalent bonds. We find that the flexible-boundary redistributed charge and dipole schemes yield reasonable agreement with full-QM calculations for a number of molecular ions and amino acids with charged side chains. Using the full-QM results as reference, the mean unsigned deviations are computed to be 0.06 e for atomic partial charges of the QM atoms, 0.11 e for the amounts of charge transfer between the QM and MM subsystems, and 0.016 Å for the lengths of the covalent bonds that directly connect the QM and MM subsystems. The results indicate the importance of accounting for partial charge transfer across the QM/MM boundary when the QM subsystems are charged.     

Fragment-based quantum mechanical methods for periodic systems with Ewald summation and mean image charge convention for long-range electrostatic interactions

We describe an Ewald-summation method to incorporate long-range electrostatic interactions into fragment-based electronic structure methods for periodic systems. The present method is an extension of the particle-mesh Ewald technique for combined quantum mechanical and molecular mechanical (QM/MM) calculations, and it has been implemented into the explicit polarization (X-Pol) potential to illustrate the computational details. As in the QM/MM-Ewald method, the X-Pol-Ewald approach is a linear-scaling electrostatic method, in which the short-range electrostatic interactions are determined explicitly in real space and the long-range Ewald pair potential is incorporated into the Fock matrix as a correction. To avoid the time-consuming Fock matrix update during the self-consistent field procedure, a mean image charge (MIC) approximation is introduced, in which the running average with a user-chosen correlation time is used to represent the long-range electrostatic correction as an average effect. Test simulations on liquid water show that the present X-Pol-Ewald method takes about 25% more CPU time than the usual X-Pol method using spherical cutoff, whereas the use of the MIC approximation reduces the extra costs for long-range electrostatic interactions by 15%. The present X-Pol-Ewald method provides a general procedure for incorporating long-range electrostatic effects into fragment-based electronic structure methods for treating biomolecular and condensed-phase systems under periodic boundary conditions.     

Importance of accurate charges in molecular docking: quantum mechanical/molecular mechanical (QM/MM) approach

The extent to which accuracy of electric charges plays a role in protein-ligand docking is investigated through development of a docking algorithm, which incorporates quantum mechanical/molecular mechanical (QM/MM) calculations. In this algorithm, fixed charges of ligands obtained from force field parameterization are replaced by QM/MM calculations in the protein environment, treating only the ligands as the quantum region. The algorithm is tested on a set of 40 cocrystallized structures taken from the Protein Data Bank (PDB) and provides strong evidence that use of nonfixed charges is important. An algorithm, dubbed "Survival of the Fittest" (SOF) algorithm, is implemented to incorporate QM/MM charge calculations without any prior knowledge of native structures of the complexes. Using an iterative protocol, this algorithm is able in many cases to converge to a nativelike structure in systems where redocking of the ligand using a standard fixed charge force field exhibits nontrivial errors. The results demonstrate that polarization effects can play a significant role in determining the structures of protein-ligand complexes, and provide a promising start towards the development of more accurate docking methods for lead optimization applications.     

Energy decomposition in molecular complexes: implications for the treatment of polarization in molecular simulations

This study examines the contribution of electrostatic and polarization to the interaction energy in a variety of molecular complexes. The results obtained from the Kitaura-Morokuma (KM) energy decomposition analysis at the HF/6-31G(d) level indicate that, for intermolecular distances around the equilibrium geometries, the polarization energy can be determined as the addition of the polarization energies of interacting blocks, as the mixed polarization term is typically negligible. Comparison of KM and QM/MM results shows that the electrostatic energy determined in the KM method is underestimated (in absolute value) by QM/MM methods. The reason of such underestimation can be attributed to the simplified representation of treating the interaction between overlapping charge distribution by the interaction of a QM molecule with a set of point charges. Nevertheless, the polarization energies calculated by KM and QM/MM methods are in close agreement. Finally, a consistent, automated strategy to derive charge distributions that include implicitly polarization effects in pairwise, additive force fields is presented. The strategy relies in the simultaneous fitting of electrostatic and polarization energies computed by placing a suitable perturbing particle at selected points around the molecule. The suitability of these charges to describe molecular interactions is discussed.     

Variational calculation of quantum mechanical/molecular mechanical free energy with electronic polarization of solvent

Quantum mechanical/molecular mechanical (QM/MM) free energy calculation presents a significant challenge due to an excessive number of QM calculations. A useful approach for reducing the computational cost is that based on the mean field approximation to the QM subsystem. Here, we describe such a mean-field QM/MM theory for electronically polarizable systems by starting from the Hartree product ansatz for the total system and invoking a variational principle of free energy. The MM part is then recast to a classical polarizable model by introducing the charge response kernel. Numerical test shows that the potential of mean force (PMF) thus obtained agrees quantitatively with that obtained from a direct QM/MM calculation, indicating the utility of self-consistent mean-field approximation. Next, we apply the obtained method to prototypical reactions in several qualitatively different solvents and make a systematic comparison of polarization effects. The results show that in aqueous solution the PMF does not depend very much on the water models employed, while in nonaqueous solutions the PMF is significantly affected by explicit polarization. For example, the free energy barrier for a phosphoryl dissociation reaction in acetone and cyclohexane is found to increase by more than 10 kcal/mol when switching the solvent model from an empirical to explicitly polarizable one. The reason for this is discussed based on the parametrization of empirical nonpolarizable models.     

Geometry optimization based on linear response free energy with quantum mechanical/molecular mechanical method: applications to Menshutkin-type and Claisen rearrangement reactions in aqueous solution

The authors present a method based on a linear response theory that allows one to optimize the geometries of quantum mechanical/molecular mechanical (QM/MM) systems on the free energy surfaces. Two different forms of linear response free energy functionals are introduced, and electronic wave functions of the QM region, as well as the responses of electrostatic and Lennard-Jones potentials between QM and MM regions, are self-consistently determined. The covariant matrix relating the QM charge distribution to the MM response is evaluated by molecular dynamics (MD) simulation of the MM system. The free energy gradients with respect to the QM atomic coordinates are also calculated using the MD trajectory results. They apply the present method to calculate the free energy profiles of Menshutkin-type reaction of NH3 with CH3Cl and Claisen rearrangement of allyl vinyl ether in aqueous solution. For the Menshutkin reaction, the free energy profile calculated with the modified linear response free energy functional is in good agreement with that by the free energy perturbation calculations. They examine the nonequilibrium solvation effect on the transmission coefficient and the kinetic isotope effect for the Claisen rearrangement.     

Geometry optimization using tuned and balanced redistributed charge schemes for combined quantum mechanical and molecular mechanical calculations

We performed geometry optimizations using the tuned and balanced redistributed charge algorithms to treat the QM-MM boundary in combined quantum mechanical and molecular mechanical (QM/MM) methods. In the tuned and balanced redistributed charge (TBRC) scheme, the QM boundary atom is terminated by a tuned F link atom, and the charge of the MM boundary atom is properly adjusted to conserve the total charge of the entire QM/MM system; then the adjusted MM boundary charge is moved evenly to the midpoints of the bonds between the MM boundary atom and its neighboring MM atoms. In the tuned and balanced redistributed charge-2 (TBRC2) scheme, the adjusted MM boundary charge is moved evenly to all MM atoms that are attached to the MM boundary atom. A new option, namely charge smearing, has been added to the TBRC scheme, yielding the tuned and balanced smeared redistributed charge (TBSRC) scheme. In the new scheme, the redistributed charges near the QM-MM boundary are smeared to make the electrostatic interactions between the QM region and the redistributed charges more realistic. The TBRC2 scheme and new TBSRC scheme have been tested for various kinds of bonds at a QM-MM boundary, including C-C, C-N, C-O, O-C, N-C, C-S, S-S, S-C, C-Si, and O-N bonds. Charge smearing is necessary if the redistributed charges are close to the QM region, as in the TBSRC scheme, but not if the redistributed charge is farther from the QM region, as in the TBRC2 scheme. We found that QM/MM results using either the TBRC2 scheme or the TBSRC scheme agree well with full QM results; the mean unsigned error (MUE) of the QM/MM deprotonation energy is 1.6 kcal/mol in both cases, and the MUE of QM/MM optimized bond lengths over the three bonds closest to the QM-MM boundary, with errors averaged over the protonated forms and unprotonated forms, is 0.015 ? for TBRC2 and 0.021 ? for TBSRC. The improvements in the new scheme are essential for QM-MM boundaries that pass through a polar bond, but even for boundaries that pass through C-C bonds, the improvement can be quite significant.     

Toward a new approach for determination of solute's charge distribution to analyze interatomic electrostatic interactions in quantum mechanical/molecular mechanical simulations

We present an alternative approach to determine "density-dependent property"-derived charges for molecules in the condensed phase. In the case of a solution, it is essential to take into consideration the electron polarization of molecules in the active site of this system. The solute and solvent molecules in this site have to be described by a quantum mechanical technique and the others are allowed to be treated by a molecular mechanical method (QM/MM scheme). For calculations based on this scheme, using the forces and interaction energy as density-dependent property our charges from interaction energy and forces (CHIEF) approach can provide the atom-centered charges on the solute atoms. These charges reproduce well the electrostatic potentials around the solvent molecules and present properly the picture of the electron density of the QM subsystem in the solution system. Thus, the CHIEF charges can be considered as the atomic charges under the conditions of the QM/MM simulation, and then enable one to analyze electrostatic interactions between atoms in the QM and MM regions. This approach would give a view of the QM nuclei and electrons different from the conventional methods.     

A minimal implementation of the AMBER-GAUSSIAN interface for ab initio QM/MM-MD simulation

For applying to a number of theoretical methodologies based on an ab initio quantum mechanical/molecular mechanical (QM/MM) molecular dynamics method connecting AMBER9 with GAUSSIAN03, we have developed an AMBER-GAUSSIAN interface (AG-IF), which can be one of the simplest architectures. In the AG-IF, only a few subroutines addition is necessary to retrieve the QM/MM energy and forces, obtained by GAUSSIAN, for solving a set of Newtonian equations of motion in AMBER. It is, therefore, easy to be modified for individual applications since AG-IF utilizes most of those functions originally equipped not only in AMBER but also in GAUSSIAN. In the present minimal implementation, only AMBER is modified, whereas GAUSSIAN is left unchanged. Moreover, a different method of calculating electrostatic forces of MM atoms interacting with QM region is proposed. Using the AG-IF, we also demonstrate three examples of application: (i) the QM versus MM comparison in the radial distribution function, (ii) the free energy gradient method, and (iii) the charge from interaction energy and forces.     

Assessment of weak intermolecular interactions across QM/MM noncovalent boundaries

An assessment of a number of quantum mechanical/molecular mechanical (QM/MM) combinations was performed for weak intermolecular interactions across noncovalent QM/MM 'boundaries'. The popular S22 data set, comprising of a number of weak hydrogen-bonded, dispersion-bound and complexes with mixed interactions was used for the assessment. A range of QM methods was combined with a number of popular MM force fields. The single-point interaction energies, at reference geometries, are presented as deviations to accurate CCSD(T)/CBS reference values. This investigation employed both additive and subtractive QM/MM schemes. The density functional has only a negligible effect; the choice of basis set was also negligible in terms of accuracy. The importance of selecting the most appropriate MM force field for accurately describing interactions at the noncovalent 'boundary' region has a dramatic effect on the accuracy.