Electrocatalytic oxidation of ammonia on Pt(111) and Pt(100) surfaces

The electrocatalytic oxidation of ammonia on Pt(111) and Pt(100) has been studied using voltammetry, chronoamperometry, and in situ infrared spectroscopy. The oxidative adsorption of ammonia results in the formation of NH(x) (x = 0-2) adsorbates. On Pt(111), ammonia oxidation occurs in the double-layer region and results in the formation of NH and, possibly, N adsorbates. The experimental current transients show a hyperbolic decay (t(-1)), which indicates strong lateral (repulsive) interactions between the (reacting) species. On Pt(100), the NH(2) adsorbed species is the stable intermediate of ammonia oxidation. Stabilization of the NH and NH(2) fragments on Pt(111) and Pt(100), respectively, is in an interesting agreement with recent theoretical predictions. The Pt(111) surface shows extremely low activity in ammonia oxidation to dinitrogen, thus indicating that neither NH nor N (strongly) adsorbed species are active in dinitrogen production. Neither nitrous oxide nor nitric oxide is the product of ammonia oxidation on Pt(111) at potentials up to 0.9 V, as deduced from the in situ infrared spectroscopy measurements. The Pt(100) surface is highly active in dinitrogen production. This process is characterized by a Tafel slope of 30 mV decade(-1), which is explained by a rate-determining dimerization of NH(2) fragments followed by a fast decay of the resulting surface-bound hydrazine to dinitrogen. Therefore, the high activity of the Pt(100) surface for ammonia oxidation to dinitrogen is likely to be related to its ability to stabilize the NH(2) adsorbate.     

Catalytic reaction energetics by single crystal adsorption calorimetry: hydrocarbons on Pt(111)

Single crystal adsorption calorimetry provides essential information about the energetics of surface reactions on well-defined surfaces where the adsorbed reaction products can be clearly identified. In this tutorial review, we cover the essentials of that technique, with emphasis on our lab's recent advances in sensitivity and temperature range, and demonstrate what can be achieved through a review of selected example studies concerning adsorption and dehydrogenation of hydrocarbons on Pt(111). A fairly complete reaction enthalpy diagram is presented for the dehydrogenation of cyclohexane to benzene on Pt(111).     

Thermal chemistry of 1-methyl-1-cyclopentene and methylene cyclopentane on Pt(111) surfaces: evidence for double-bond isomerization

The thermal chemistry of 1-methyl-1-cyclopentene (1MCp(=)) and methylene cyclopentane (MeCp) was investigated on clean and hydrogen- and deuterium-predosed Pt(111) single-crystal surfaces by temperature-programmed desorption and reflection-absorption infrared spectroscopy. It was found that MeCp isomerizes easily to 1MCp(=) but that the reverse reaction does not occur, at least under our experimental conditions. The MeCp to 1MCp(=) isomerization is aided by the presence of coadsorbed hydrogen, and occurs through the formation of a common 1-methyl-1-cyclopentyl (1MCp-Pt) surface intermediate; that intermediate then undergoes beta-hydride elimination selectively at the ring position to form the 1MCp(=) product. In addition to this isomerization, both 1MCp(=) and MeCp also dehydrogenate on the Pt(111) surface to form a methylcyclopentadiene species, at 325 and 350 K, respectively. A small amount of benzene desorption is detected above 500 K with both reactants, indicative of a ring enlargement reaction. No evidence for the activation of any of the allylic hydrogens was obtained in either molecule.     

离子液体中Au(111)和Pt(111)表面Ge欠电位沉积的现场STM研究

本文研究BMIPF₆离子液体中Au(111)和Pt(111)表面Ge的电沉积行为. 循环伏安法测试结果表明,在含0.1 mol·L^-1 GeCl₄的BMIPF₆溶液Au(111)和Pt(111)表面均有两个与Ge沉积过程相关的还原峰. 第一个还原峰包含了Ge⁴⁺还原成Ge²⁺及Ge的欠电位沉积,第二个还原峰对应Ge的本体沉积. 现场扫描隧道显微镜研究结果表明,Ge在Au(111)和Pt(111)表面均有两层欠电位沉积. 第一层欠电位沉积厚度约为0.25 nm、形貌平整、带有缝隙的亚单层结构. 第二层欠电位沉积形貌相对粗糙的点状团簇结构. 该欠电位沉积过程伴随表面合金化.     

Vibrational energy relaxation at surfaces: O2 chemisorbed on Pt(111)

It is shown that the O-O stretch for O₂ chemisorbed on Pt(111) is likely to be damped via excitation of electron-hole pairs. Vibrational spectroscopic data for this system are analyzed using a model which assumes an adsorbate-induced resonance in the vicinity of the Fermi energy. In accordance with theory, the vibrational line profile is asymmetric and from the deduced linewidth γ, asymmetry parameter τ and vibrational polarizability α_v, we estimate the magnitude of the electron-phonon coupling parameter and derive information as to the nature of the adsorbate-induced resonance state.     

Enhanced water photolysis with Pt metal nanoparticles on single crystal TiO2 surfaces

Two novel deposition methods were used to synthesize Pt-TiO(2) composite photoelectrodes: a tilt-target room temperature sputtering method and aerosol-chemical vapor deposition (ACVD). Pt nanoparticles (NPs) were sequentially deposited by the tilt-target room temperature sputtering method onto the as-synthesized nanostructured columnar TiO(2) films by ACVD. By varying the sputtering time of Pt deposition, the size of deposited Pt NPs on the TiO(2) film could be precisely controlled. The as-synthesized composite photoelectrodes with different sizes of Pt NPs were characterized by various methods, such as SEM, EDS, TEM, XRD, and UV-vis. The photocurrent measurements revealed that the modification of the TiO(2) surface with Pt NPs improved the photoelectrochemical properties of electrodes. Performance of the Pt-TiO(2) composite photoelectrodes with sparsely deposited 1.15 nm Pt NPs was compared to the pristine TiO(2) photoelectrode with higher saturated photocurrents (7.92 mA/cm(2) to 9.49 mA/cm(2)), enhanced photoconversion efficiency (16.2% to 21.2%), and increased fill factor (0.66 to 0.70). For larger size Pt NPs of 3.45 nm, the composite photoelectrode produced a lower photocurrent and reduced conversion efficiency compared to the pristine TiO(2) electrode. However, the surface modification by Pt NPs helped the composite electrode maintain higher fill factor values.     

Chiral templating of surfaces: adsorption of (S)-2-methylbutanoic acid on Pt(111) single-crystal surfaces

The adsorption and thermal chemistry of (S)-(+)-2-methylbutanoic acid ((S)-2MBA) on Pt(111) single-crystal surfaces was characterized by using temperature programmed desorption (TPD) and reflection-adsorption infrared (RAIRS) spectroscopies. Particular emphasis was placed on the characterization of the chiral superstructures formed upon the deposition of the submonolayer coverages of enantiopure (S)-2-methylbutanoate species that are produced by thermal dehydrogenation of the (S)-2MBA. The enantioselectivity of the empty platinum sites left open on those structures were identified by their difference in behavior toward the adsorption of the two enantiomers of propylene oxide. It was found that a significant enhancement in adsorption is possible on surfaces with the same chirality of the probe molecule, specifically that the uptake of (S)-propylene oxide is larger than that of (R)-propylene oxide on (S)-2-methylbutanoate adsorbed layers. This contrasts with the lack of enantioselectivity previously reported for the same adsorbate on Pd(111). Detectable differences in adsorption energetics of (R)- vs (S)-propylene oxide on the (S)-2-methylbutanoate/Pt(111) overlayers were measured but deemed not to be the controlling factor in the enantioselectivity reported in this system.     

High pressure isomerization of 1,4-bis(methylthio)hexafluoro-2-butene to-1-butene

The complete bond migration of the internal olefinic bond of trans-1,4-bis(methythio)hexafluoro-2-butene(I) under high pressure to the terminal olefinic bond to form cis- and trans-1,4-bis(methylthio)hexafluoro-1-butene(II) is described. The Teflon-lined high pressure cell maintains a constant pressure at 16,000 atm and 180 to 200°C for 24 hours. The cis- and trans-II are elucidated from gas chromatography-mass spectroscopy, which shows two identical parent ions at m/e value of 255(C₆H₆F₆S₂⁺), but at different elution times. The ¹⁹FNMR data of the isomeric products are summarized. Elemental analysis of II is verified by double focussing high resolution mass spectrometer.     

Thermal chemistry of C4 hydrocarbons on Pt(111): Mechanism for double-bond isomerization

The thermal chemistry of a number of C4 hydrocarbons (1,3-butadiene, 1-bromo-3-butene, 1-bromo-2-butene, trans-2-butene, cis-2-butene, 1-butene, 2-iodobutane, 1-iodobutane, and butane) was investigated on clean and hydrogen- and deuterium-predosed Pt(111) single-crystal surfaces by temperature-programmed desorption and reflection-absorption infrared spectroscopy. A combination of rapid beta-hydride eliminations from alkyls to olefins and the reverse insertions of those olefins into metal-hydrogen bonds explains the hydrogenation, dehydrogenation, and H-D exchange products that desorb from the surface. A preference for hydrogenation at the end carbons and dehydrogenation from the inner carbons also explains the extent of the isotope exchange and the preferential isomerization of 1-butene to 2-butene observed on this Pt(111) surface. The reactions of more dehydrogenated C4 species is also discussed.     

Coupling of carbon monoxide molecules over oxygen-defected UO2(111) single crystal and thin film surfaces

While coupling reactions of carbon-containing compounds are numerous in organometallic chemistry, they are very rare on well-defined solid surfaces. In this work we show that the reductive coupling of two molecules of carbon monoxide to C2 compounds (acetylene and ethylene) could be achieved on oxygen-defected UO2(111) single crystal and thin film surfaces. This result allows in situ electron spectroscopic investigation of a typical organometallic reaction such as carbon coupling and extends it to heterogeneous catalysis and solids. By using high-resolution photoelectron spectroscopy (HRXPS) it was possible to track the changes in surface states of the U and O atoms as well as identify the intermediate of the reaction. Upon CO adsorption U cations in low oxidation states are oxidized to U4+ ions; this was accompanied by an increase of the O-to-U surface ratios. The HRXPS C 1s lines show the presence of adsorbed species assigned to diolate species (-OCH=CHO-) that are most likely the reaction intermediate in the coupling of two CO molecules to acetylene and ethylene.     

Electrochemical behaviour of Pt(100), Pt(111) and Pt polycrystalline surfaces in hydrogencarbonate solution

It was demonstrated that adsorbed CO is obtained from the reduction of NaHCO₃ solution when Pt(100), Pt(110), disordered Pt(111) and polycrystalline electrodes are employed. Reduction of CO₂ coming from the dissociation of the hydrogencarbonate anion is proposed as the reaction that produces CO. By using Fourier transform infrared spectroscopy, linear and multi-bonded CO were detected on polycrystalline platinum electrodes. The shape of the band associated with linearly adsorbed CO is monopolar as a consequence of the partial overlapping, at lower wavenumbers, of the absolute bands at both potentials (0.05 and 0.35 V).     

DFT characterization of adsorbed NH(x) species on Pt(100) and Pt(111) surfaces

Periodic density functional theory (DFT) calculations using plane waves have been performed to systematically investigate the adsorption and relative stability of ammonia and its dehydrogenated species on Pt(111) and Pt(100) surfaces. Different adsorption geometries and positions have been studied, and in each case, the equilibrium configuration has been determined by relaxation of the system. The vibrational spectra of the various ammonia fragments have been computed, and band assignments have been compared in detail with available experimental data. The adsorption of NH3 (on top) and NH2 (bridge) is more favorable on Pt(100) than on Pt(111), while similar adsorption energies were computed for NH (hollow) and N (hollow) on both surfaces. The remarkably lower adsorption energy of NH2 over Pt(111) as compared with Pt(100) (the difference being approximately 0.7 eV) can be related to different geometric and electronic factors associated with this particular intermediate. Accordingly, the type of platinum surface determines the most stable NH(x) fragment: Pt(100) has more affinity for NH2 species, whereas NH species are preferred over Pt(111).     

Experimental and theoretical study of reactivity trends for methanol on Co/Pt(111) and Ni/Pt(111) bimetallic surfaces

Methanol was used as a probe molecule to examine the reforming activity of oxygenates on NiPt(111) and CoPt(111) bimetallic surfaces, utilizing density functional theory (DFT) modeling, temperature-programmed desorption, and high-resolution electron energy loss spectroscopy (HREELS). DFT results revealed a correlation between the methanol and methoxy binding energies and the surface d-band center of various NiPt(111) and CoPt(111) bimetallic surfaces. Consistent with DFT predictions, increased production of H2 and CO from methanol was observed on a Ni surface monolayer on Pt(111), designated as Ni-Pt-Pt(111), as compared to the subsurface monolayer Pt-Ni-Pt(111) surface. HREELS was used to verify the presence and subsequent decomposition of methoxy intermediates on NiPt(111) and CoPt(111) bimetallic surfaces. On Ni-Pt-Pt(111) the methoxy species decomposed to a formaldehyde intermediate below 300 K; this species reacted at approximately 300 K to form CO and H2. On Co-Pt-Pt(111), methoxy was stable up to approximately 350 K and decomposed to form CO and H2. Overall, trends in methanol reactivity on NiPt(111) bimetallic surfaces were similar to those previously determined for ethanol and ethylene glycol.     

Electrocatalytic properties of Pt(111), Pt(332), Pt(331) and Pt(110) single crystal electrodes towards ethylene glycol oxidation in sulphuric acid solutions

In the present paper four platinum single crystal electrodes, two basal planes of Pt(111) and Pt(110) and two stepped surfaces of Pt(332) and Pt(331), were prepared and used in the study of electro-oxidation of ethylene glycol (EG). All of these Pt single crystal electrodes belong to the [1 0] zone of crystallography, and exhibit on their surface (111) symmetry sites or certain combinations of terraces of (111) symmetry with steps of (111) symmetry type. It has been found that as a result of a favourable steric matching of surface sites the Pt(110) electrode manifested a higher activity both for EG dissociative adsorption and oxidation than that of the Pt(111) electrode. The stepped surfaces of Pt(332) and Pt(331) operated with certain combinations of characteristics of Pt(111) and Pt(110). The best electrocatalytic properties have been obtained with a Pt(331) electrode, and this is attributed both to the configuration of the atomic arrangement and to the stability of this surface.In summary, the above results show that the performance of a given Pt single crystal electrode in EG oxidation at a potential below 1.0 V may be evaluated by three factors.

1. (1) The ability to resist self-poisoning (AB) which describes the difficulty of EG dissociative adsorption on the electrode surface.

2. (2) The activity for EG oxidation (AC). In considering that the threshold potential for EG oxidation on all electrodes is at 0.3 V and that the self-poisoning is encountered in PGPS, the activity for EG oxidation may be reasonably characterized by the intensity of the peak current acquired in NGPS near 0.6 V, which corresponds to the maximum current of EG oxidation on an activated (non-poisoned) surface of the electrode.

3. (3) The stability of activity during potential cycling (SA) between 0.05 and 1.0 V, which describes the resistance to the decrease of intensity of the EG oxidation current during voltammetric cycling.

For the two basal planes studied, the AB and SA of Pt(111) are higher than those of Pt(110), but its AC is much lower than that of Pt(110). These differences are clearly related to the surface atomic arrangement of the two electrodes. As has been discussed above, the surface of Pt(111) is atomically smooth and stable during voltammetric cycling. The surface of Pt(110) presents, however, atomic steps and is reconstructed under experimental conditions, i.e. certain steric configurations are encountered on the Pt(110) surface. The high AC and the low AB may be assigned to a favourite stereographic matching during EG adsorption and oxidation on Pt(110).The two electrodes with stepped surfaces, Pt(332) and Pt(331), contain different densities of (110) sites, which are formed on the border between terrace and step, as shown in Fig. 8. The AB of these two electrodes has been observed at a moderate range between that of Pt(111) and the AB of Pt(110). With a majority of (111) sites on its surface, the electrode of Pt(332) operates at a relatively higher AC than Pt(111) does, and its SA is not as good as that of Pt(111) but is much better than the SA of a Pt(110) electrode. In all cases the highest AC and SA are obtained with a Pt(331) electrode. It may be seen from the profile of a (331) plane (shown by the cross-section of A-A in Fig. 8) that all atoms on the top of the surface participated in forming (110) sites, and the atom on the step has two functions — one is to form a (110) site with an atom located in the terrace of second layer and the other is to form a (111) site in the terrace of the same layer. It has been mentioned in the above discussions that the Pt(110) electrode keeps a higher AC due to favourite stereographic matching in EG adsorption and oxidation, but its SA is the worst, due to the instability of the surface. The highest AC and SA obtained with Pt(331) may be ascribed not only to the high density of (110) sites existing on the surface, but also to the stabilization of these (110) sites, and moreover, the synergy generated by the atomic arrangement of the Pt(331) surface may also contribute to the performance of the Pt(331) electrode.     

NO adsorption on Pt (111)/Bi surfaces

The adsorption of nitric oxide (NO) on a Pt (111) surface modified with irreversible adsorbed bismuth adatoms is reported. While the voltammetric results reveal a close interaction between the two co-adsorbed compounds. In-situ infrared spectroscopy and scanning tunnelling microscopy indicate the formation of segregated adlayers. Formation of compressed Bi adlayers with modified redox properties is proposed to reconcile both results. This agrees with the observation of Bi islands in the STM images when NO is coadsorbed, not observed in the absence of NO.     

STM study of glycine on TiO2(110) single crystal surfaces

The adsorption of glycine (NH2CH2COOH) was examined by scanning tunneling microscopy (STM) on TiO2(110) surfaces at room temperature. A (2x1) ordered overlayer was observed on the TiO2(110)-(1x1) surface. The adsorption of acetic acid and propanoic acid was also investigated on this surface and their STM images were quite similar to that of glycine. Since acetate and propanoate are formed by dissociative adsorption of these acids on TiO2(110), it is proposed that glycine adsorbs in the same way to form a glycinate. The amino group in the glycinate adlayer structurally analogous to those formed from aliphatic carboxylic acids would be extended away from the surface and potentially free to participate in additional reactions. The underlying structure of the TiO2 surface is important in determining the structure of the glycinate adlayer; no ordering of these adsorbates was observed on the TiO2(110)-(1x2) surface.     

Electrochemistry of platinum single crystal surfaces: Part II. Structural effect on formic acid oxidation and poison formation on Pt (111), (100) and (110)

The geometrical arrangement of sites favourable for formic acid oxidation and the poison formation reaction is determined using low index platinum single crystal planes. For this determination, the least number of sites required for the reactions to occur, which was obtained in the study of electrocatalysis by adatoms, was used, that is three adjacent sites are required for formic acid oxidation and four adjacent sites are required for poison formation.The triplet of sites on a unit lattice of Pt (111) and that on a unit lattice of Pt (100) plane are equally very favourable for the main oxidation reaction, but that on a unit lattice of Pt (110) is not so favourable as those on the former two planes. The oxidation rate is more than one order of magnitude lower on the latter than on the former triplets.The poison formation reaction proceeds at a very high rate on the (100) and the (110) planes. The geometrical arrangement of four sites on a square unit lattice of the (100) plane and on a rectangular unit lattice of the (110) plane are favourable for the poison formation reaction, but that on a hexagonal unit lattice of the (111) plane is not so favourable as the former two.     

NO Chemisorption on Pt(111), Rh/Pt(111), and Pd/Pt(111)

The chemisorption of NO on clean Pt(111), Rh/Pt(111) alloy, and Pd/Pt(111) alloy surfaces has been studied by first principles density functional theory (DFT) computations. It was found that the surface compositions of the surface alloys have very different effects on the adsorption of NO on Rh/Pt(111) versus that on Pd/Pt(111). This is due to the different bond strength between the two metals in each alloy system. A complex d-band center weighting model developed by authors in a previous study for SO2 adsorption is demonstrated to be necessary for quantifying NO adsorption on Pd/Pt(111). A strong linear relationship between the weighted positions of the d states of the surfaces and the molecular NO adsorption energies shows the closer the weighted d-band center is shifted to the Fermi energy level, the stronger the adsorption of NO will be. The consequences of this study for the optimized design of three-way automotive catalysts, (TWC) are also discussed.