大面积Bi单晶纳米线阵列的制备

在有序的氧化铝模板(AAO)的孔洞中, 采用电化学沉积工艺成功地制备了准金属Bi纳米线有序阵列. 使用X射线衍射仪(XRD)、场发射扫描电子显微镜(FE-SEM)、透射电子显微镜(TEM)及高分辨电子显微镜(HRTEM)对样品的结构和形貌进行了表征. XRD结果表明, 所制备的铋样品为六方相, 且沿[110]方向有很好的生长取向; FE-SEM图片清晰地说明铋纳米线阵列是大面积、填充率高和高度有序的; TEM的结果显示纳米线直径均匀、表面光滑且长径比大; HRTEM图片中清晰的晶格条纹和选区电子衍射(SAED)结果表明纳米线是单晶.     

The incommensurately modulated structures of the perovskites NaCeMnWO6 and NaPrMnWO6

The structures of the doubly ordered perovskites NaCeMnWO(6) and NaPrMnWO(6), with rock salt ordering of the Mn(2+) and W(6+)B-site cations and layered ordering of the Na(+) and (Ce(3+)/Pr(3+)) A-site cations, have been studied by transmission electron microscopy, electron diffraction, neutron and synchrotron X-ray powder diffraction. Both compounds possess incommensurately modulated crystal structures. In NaCeMnWO(6) the modulation vector (with reference to the ideal ABX(3) perovskite subcell) is q ≈ 0.067a* (～58.7 ?) and in NaPrMnWO(6)q ≈ 0.046a* (～85.3 ?). In both compounds the superstructures are primarily the two-dimensional chessboard type, although some crystals of NaCeMnWO(6) were found with one-dimensional stripes. In some crystals of NaPrMnWO(6) there is a coexistence of chessboards and stripes. Modeling of neutron diffraction data shows that octahedral tilting plays an important role in the structural modulation.     

Self-catalyst growth of single-crystalline CaB6 nanostructures

Large-scale calcium hexaboride (CaB₆) nanostructures have been successfully fabricated with self-catalyst method using calcium (Ca) powders and boron trichloride (BCl₃) gas mixed with hydrogen and argon. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and selected-area electron diffraction (SAED) were used to characterize the compositions, morphologies, and structures of the samples. Our results show that the nanowires are highly single crystals elongated preferentially in the [1 1 0] direction. The growth mechanism based on the self-catalyst process is simply discussed.     

通过微观形貌对Ba(Ti,Sn)O_3压电陶瓷的结构及压电性能分析

本文采用传统固相合成法制备了(Ba_(1-x)Ca_x)(Ti_(0.98)Sn_(0.02))O_3(BCTS,x=0.00、0.01、0.02、0.03)无铅压电陶瓷,研究了不同烧结温度下Ba(Ti,Sn)O_3压电陶瓷材料的微观形貌对相结构及压电性能的影响。X-射线衍射(XRD)分析表明,所有陶瓷样品均为单一、纯钙钛矿结构,无第二相生成。通过扫描电子显微镜(SEM)图片可知,陶瓷样品在烧结温度为1450℃时,晶粒更加均匀、陶瓷结构更加致密,气孔较少并且晶粒成螺旋状结构生长。当陶瓷烧结温度为1450℃,并且x=0.01时,陶瓷的综合性能达到最佳,其压电常数(d33)达到346pC/N。     

Improved Photovoltaic Performance from High Quality Perovskite Thin Film Grown with the Assistance of PC71BM

The strategy of sequentially spin-coating a perovskite film from the perovskite precursor and an electron transporting layer of [6,6]-phenyl-C_(71)-butyric acid methyl ester(PC_(71)BM) is developed to simplify the fabrication procedure of perovskite solar cells. X-ray diffraction and scanning electron microscopy indicate that PC_(71)BM film on perovskite layer can retard the evaporation of dimethyl sulfoxide(DMSO) efficiently, thus prolonging the transformation of intermediate phase to perovskite crystals, leading to a high quality perovskite thin film. The solar cells with the structure of indium tin oxides(ITO)/poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)(PEDOT:PSS)/CH_3NH_3PbI_3/PC_(71)BM/bathocuproine(BCP)/Ag made from this simplified method exhibit a higher efficiency(12.68%) than those from the conventional one-step method(9.49%).     

Preparation of Superhydrophobic ZnO Films on Zinc Substrate by Chemical Solution Method

Superhydrophobic surface was prepared on the zinc substrate by chemical solution method via immersing clean pure zinc substrate into a water solution of zinc nitrate hexahydrate[Zn(NO₃)₂·6H₂O] and hexamethylenetetraamine( C₆H₁₂N₄) at 95 ℃ in water bath for 1.5 h, then modified with 18 alkanethiol. The best resulting surface shows superhydrophobic properties with a water contact angle of about 158° and a low water roll-off angle of around 3°. The prepared samples were characterized by powder X-ray diffraction(XRD), X-ray photoelectron spectroscopy (XPS), energy-dispersive X-ray spectroscopy(EDX), transmission electron microscopy(TEM), and scanning electron microscopy(SEM). SEM images of the films show that the resulting surface exhibits flower-shaped micro- and nano-structure. The surfaces of the prepared films were composed of ZnO nanorods which were wurtzite structure. The special flower-like micro- and nano-structure along with the low surface energy leads to the surface superhydrophobicity.     

Beyond the structure-property relationship paradigm: influence of the crystal structure and microstructure on the Li+ conductivity of La2/3Li(x)Ti(1-x)Al(x)O3 Oxides

The crystal structures of several oxides of the La(2/3)Li(x)Ti(1-x)Al(x)O(3) system have been studied by selected-area electron diffraction, high-resolution transmission electron microscopy, and powder neutron diffraction, and their lithium conductivity has been by complex impedance spectroscopy. The compounds have a perovskite-related structure with a unit cell radical2 a(p)x2 a(p)x radical2 a(p) (a(p)=perovskite lattice parameter) due to the tilting of the (Ti/Al)O(6) octahedra and the ordering of lanthanum and lithium ions and vacancies along the 2 a(p) axis. The Li(+) ions present a distorted square-planar coordination and are located in interstitial positions of the structure, which could explain the very high ionic conductivity of this type of material. The lithium conductivity depends on the oxide composition and its crystal microstructure, which varies with the thermal treatment of the sample. The microstructure of these titanates is complex due to formation of domains of ordering and other defects such as strains and compositional fluctuations.     

Increasing the structural complexity of chromium(IV) oxides by high-pressure and high-temperature reactions of CrO2

This work presents an overview of a series of increasingly complex oxides synthesized from CrO 2, under high-pressure and high-temperature conditions, having Cr (4+) in octahedral coordination. Although the emphasis is on the structure and microstructure of the compounds as obtained from X-ray diffraction and transmission electron microscopy and diffraction, attention is also given to their interesting electronic and magnetic properties. The study is complemented with an electron energy loss spectroscopic analysis of the different phases. These are the cubic perovskite SrCrO 3, the orthorhombic perovskite CaCrO 3, the solid solution Sr 1-xCa xCrO 3, the Ruddlesden-Popper-type Sr 3Cr 2O 7, the family CrSr 2RECu 2O 8 (RE = rare earth), a compositionally modulated perovskite "PbCrO 3", and the misfit layer oxide SrO 2[CrO 2] 1.85.     

Palladium nanoparticles supported on cucurbit[6]uril: an efficient heterogeneous catalyst for the Suzuki reaction under mild conditions

A new NC palladacycle was synthesized and supported on cucurbit[6]uril (CB[6]). The CB[6]‐supported palladium was used as an efficient nanocatalyst for the Suzuki reaction. In these reactions various aryl halides were reacted with arylboronic acids in H₂O–EtOH at both room temperature and 40 °C. The obtained Pd nanocatalyst exhibited excellent reactivity and stability in C ? C bond formation, which confirms that the catalyst is a completely active heterogeneous species. The Pd nanocatalyst was characterized using X‐ray diffraction, scanning electron microscopy and transmission electron microscopy. Copyright © 2014 John Wiley & Sons, Ltd.     

Lamellar metal-organic complex and its rod-like nanoparticles prepared with ultrasonic technique

Metal-organic complex (H3NCH2CH2NH2)3[MoO2(OC6H4O)2] with a lamellar morphology has been syn- thesized. Its crystal structure was confirmed by single-crystal X-ray diffraction. The morphology of the crystal was observed by scanning electron microscopy (SEM). The metal-organic nanoparticles have been prepared by using an ultrasonic method. The morphology of the as-prepared nanoparticles was observed by transmission electron microscopy (TEM). The possible formation mechanism has also been proposed.     

硼酸镁纳米带的制备、结构和生长机理

以晶态B和纳米MgO粉末为原料, 在1100 ℃含水的气氛下反应制备了新型准一维纳米材料硼酸镁纳米带. 采用多种表征方法, 如X射线衍射(XRD), 扫描电镜(SEM), 透射电镜(TEM), 能量色散谱仪(EDS)和傅立叶红外(FT-IR)等, 研究了产物的形貌和结构. 结果表明, 除了部分附着的Mg₂B₂O₅颗粒外, 产物主要为单晶的Mg₃B₂O₆纳米带. 其宽度在100～200 nm, 长度达到几十微米, 生长方向大致为[010]方向. 简要讨论了硼酸镁纳米带的生长机理和反应温度对产物的影响.     

Systematic investigation of the formation of 1D alpha-Si(3)N(4) nanostructures by using a thermal-decomposition/nitridation process

This article describes a simple thermal-decomposition/nitridation method for the large-scale synthesis of 1D alpha-Si(3)N(4) nanostructures, such as millimeter-scale microribbons, nanosaws, nanoribbons, and nanowires. These nanostructures are systematically investigated by checking the product deposited at different areas by using powder X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and electron energy loss spectroscopy. Studies show that all these nanostructures have a single-crystalline nature and predominantely grow along the [011] direction. These 1D nanostructures are formed by thermal decomposition, followed by the nitridation of SiO.     

Polarization Rotation in the Monoclinic Perovskite BiCo(1-x) Fe(x) O(3)

The monoclinic perovskite BiCo(1-x) Fe(x) O(3) (x≈0.7) undergoes a second-order structural transition from tetragonal to monoclinic, which is accompanied by a rotation of the polarization vector from the [001] to [111] directions of a pseudo cubic cell. The crystal structure, determined by electron diffraction and powder synchrotron X-ray diffraction, was the same as that of Pb(Ti(1-x) Zr(x) )O(3) at the morphotropic phase boundary.     

Synthesis of ordered Al nanowire arrays

Ordered Al nanowire arrays with the same nanowire density but the diameters decrease radially embedded in one piece of anodic alumina membranes were successfully fabricated by two-step synthesis: electrodeposition of Zn and replacement in AlCl₃ solution. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and selected-area electron diffraction techniques were used to characterize the Al nanowires obtained. SEM and TEM images taken from the different areas of Al nanowire arrays show that we can control the growth of aligned Al nanowires with different diameters in a single process at the same time. The investigation results not only have potential applications in photoelectric devices but also open up a new method for fabricating nano-scale materials.     

Synthesis and characterization of ferroelectric SrBi<Subscript>2</Subscript>Ta<Subscript>2</Subscript>O<Subscript>9</Subscript> nanotubes arrays

Ferroelectric SrBi₂Ta₂O₉ nanotubes were fabricated by sol–gel dipping template technique and characterized by X-ray diffraction, field emission scanning electron microscopy, and transmission electron microscopy. They had a single orthorhombic perovskite structure, and most of SBT nanotubes showed highly preferential crystal growth along the [115] orientation. FE-SEM and TEM investigations showed that nanotubes have smooth wall morphologies and well-defined diameters corresponding to the diameter of the applied template. From HRTEM results, the clear lattice fringes indicated that the nanotubes are structurally uniform and well crystallized. The growth mechanisms of SBT nanotubes into the AAO templates were explored.     

Preparation of Nanosized Perovskite‐type Oxides via Polyol Method

Several perovskite‐type nanosized oxides were prepared via polyol‐mediated synthesis. The crystallinity of the materials was analysed by X‐ray diffraction (XRD). While the “as synthesized” materials are amorphous or show very poor crystallinity, highly ordered materials could be obtained by annealing at 700 °C. Morphology of the materials was analysed by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Particle size of the materials lay between 20 and 200 nm.     

纳米晶簇多级孔道L沸石的合成及其脱硫性能

采用晶化培育法制备了L沸石纳米晶簇,以其作为前驱体,并以3-三甲基甲硅烷基丙基十六烷基二甲基氯化铵(TPHAC)为模板剂,合成了微孔-介孔多级孔道L沸石(MeLTL沸石).通过X射线衍射(XRD)、氮气吸附-脱附、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、27Al固体魔角核磁(27AlMASNMR)和吡啶傅立叶变换红外(Py-FTIR)等方法对MeLTL沸石进行了表征.研究结果表明,MeLTL沸石是由L沸石纳米晶簇自组装形成的,并具有介孔孔道和L沸石的微孔结构以及适宜的酸量与酸强度,其比表面积和孔体积分别高达611m2.g-1和0.696cm.3g-1.将MeLTL沸石作为添加剂引入柴油加氢脱硫催化剂载体中,并与添加L沸石、Al-MCM-41和仅以γ-Al2O3为载体的催化剂进行比较,其脱硫性能为最佳,经加氢后的柴油硫含量仅为9.3μg.g-1,脱硫率达99.3%.     

Improved photovoltaic performance from high quality perovskite thin film grown with the assistance of PC<Subscript>71</Subscript>BM

The strategy of sequentially spin-coating a perovskite film from the perovskite precursor and an electron transporting layer of [6,6]-phenyl-C₇₁-butyric acid methyl ester (PC₇₁BM) is developed to simplify the fabrication procedure of perovskite solar cells. X-ray diffraction and scanning electron microscopy indicate that PC₇₁BM film on perovskite layer can retard the evaporation of dimethyl sulfoxide (DMSO) efficiently, thus prolonging the transformation of intermediate phase to perovskite crystals, leading to a high quality perovskite thin film. The solar cells with the structure of indium tin oxides (ITO)/poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS)/CH₃NH₃PbI₃/PC₇₁BM/bathocuproine (BCP)/Ag made from this simplified method exhibit a higher efficiency (12.68%) than those from the conventional one-step method (9.49%).     

Synthesis and evolution of novel double tower-like ZnO by a simple method

Delicate double tower-like ZnO have been fabricated through the decomposition of the zinc nitrate hexahydrate (Zn(NO₃)₂6H₂O). The phase transformation and morphology evolution of the products were carefully studied and investigated with X-ray diffraction, scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, and Raman spectra. The resultant results indicated that the obtained double tower-like ZnO materials possess pure wurtzite hexagonal phase, growing along the [100] direction. A reasonable formation mechanism was also presented in this paper.     

Spontaneous self-assembly of water-soluble nucleotide-calixarene conjugates in small micelles coalescing to microspheres

Spontaneous self-assembly of calix[4]arenes bearing four 2'-deoxythymidine or 2'-deoxyadenosine nucleotide pendants is investigated using (1)H NMR, exchange NMR, and diffusion ordered NMR spectroscopies and dynamic light scattering. In aqueous medium, the nucleotide-calixarene conjugates, by noncovalent interactions involving both nucleobases and calixarene skeleton, form dimers which self-organize in micelles by increasing the concentration. Microscopic images (scanning electron microscopy and transmission electron microscopy) show that the nucleobase affects the aggregate morphology in the solid state.