Cu/ZnO(0001̄) and ZnOx/Cu(111): Model catalysts for methanol synthesis

In an attempt to understand the relative importance of the various constituents of copper-zinc oxide catalysts for methanol synthesis (2H₂ + CO → H₃COH), we have prepared and characterized a number of single-crystal surface structures of Cu-ZnO. The model catalysts have also been tested in terms of their activity for methanol synthesis. The growth of vapor-deposited Cu overlayers on a ZnO(0001&#x0304;) (O face) single crystal has been investigated using X-ray photoelectron spectroscopy (XPS), Auger electron spectroscopy (AES), He⁺ ion scattering spectroscopy (ISS) and low-energy electron diffraction (LEED). The results are consistent with a growth model in which, at room temperature, the first monolayer spreads uniformly across the surface in a p(1 × 1) structure. As more Cu is added, thick Cu(111) islands grow and these are separated by large regions of the p(1 × 1)-Cu monolayer. The Cu(111) islands are rotationally aligned with the ZnO substrate, and at high enough coverages grow together to cover the ZnO. Increasing temperature favors more agglomeration. A clean Cu(111) crystal and one containing a ZnO_x (x ⋍ 3) monolayer were also studied. None of these model catalysts gave rates of methanol production which were measurable in our present experimental limits (TOF < 2 × 10⁻³ molecules site⁻¹ s⁻¹) at 500–600 K and CO + H₂ pressures up to 1500 Torr. Under these “reaction” conditions, the Cu in direct contact with ZnO may be slightly oxidized; all the other Cu is completely metallic. The Cu does not change its character between deposition and reaction conditions, even if heavily oxidized to CuO in between. The addition of CO₂ at very high levels under reaction conditions does not change the character of a Cu(111) model catalyst surface, and no surface oxygen is ever observable after treatment under reaction conditions.     

Methanol decomposition on platinum (111)

The interaction of methanol with clean and oxygen-covered Pt(111) surfaces has been examined with high resolution electron loss spectroscopy (EELS) and thermal desorption spectroscopy (TDS). On the clean Pt(111) surface, methanol dehydrogenated above 140 K to form adsorbed carbon monoxide and hydrogen. On a Pt(111)-p(2 × 2)O surface, methanol formed a methoxy species (CH₃O) and adsorbed water. The methoxy species was unstable above 170 K and decomposed to form adsorbed CO and hydrogen. Above room temperature, hydrogen and carbon monoxide desorbed near 360 and 470 K, respectively. The instability of methanol and methoxy groups on the Pt surface is in agreement with the dehydrogenation reaction observed on W, Ru, Pd and Ni surfaces at low pressures. This is in contrast with the higher stability of methoxy groups on silver and copper surfaces, where decomposition to formaldehyde and hydrogen occurs. The hypothesis is proposed that metals with low heats of adsorption of CO and H₂ (Ag, Cu) may selectively form formaldehyde via the methoxy intermediate, whereas other metals with high CO and H₂ chemisorption heats rapidly dehydrogenate methoxy species below room temperature.     

Reactions of methanol and ethylene glycol on Ni/Pt: Bridging the materials gap between single crystal and polycrystalline bimetallic surfaces

The catalytic decompositions of methanol and ethylene glycol on polycrystalline Ni/Pt surfaces were used as model probe reactions to explore oxygenate reforming for H₂ production. In the current study we evaluated whether favorable chemistry observed on single crystal Ni/Pt(111) can be extended to more commercially relevant polycrystalline surfaces, thus bridging the “materials gap”. Auger electron spectroscopy (AES) confirmed that two distinct bimetallic configurations can be formed for the Ni/Pt system, each possessing unique chemical properties: one with the surface enriched in Ni atoms, designated NiPtPt, and the other with the subsurface region enriched in Ni atoms, designated PtNiPt. Consistent with single crystal studies, temperature programmed desorption (TPD) revealed that the NiPtPt configuration was more active for reforming to CO and H₂ than either polycrystalline Pt or PtNiPt. High-resolution electron energy loss spectroscopy (HREELS) confirmed the presence of strongly bound reaction intermediates on NiPtPt, including aldehyde-like species, which was also observed on Ni–Pt–Pt(111). The strongly bound reaction intermediates most likely contribute to the high reforming activity observed on NiPtPt. Overall, TPD and HREELS results on polycrystalline surfaces were in general consistent with their single crystal counterparts for the reforming of oxygenates.     

Deposition of Ni<Subscript> 13</Subscript> and Cu<Subscript> 13</Subscript> clusters on Ni(111) and Cu(111) surfaces

The soft deposition of Ni₁₃ and Cu₁₃ clusters on Ni(111) and Cu(111) surfaces is studied by means of constant-energy molecular-dynamics simulations. The atomic interactions are described by the Embedded Atom Method. It is shown that the shape of the nickel clusters deposited on Cu(111) surfaces remains rather intact, while the copper clusters impacting on Ni(111) surfaces collapse forming double and triple layered products. Furthermore, it is found that for an impact energy of 0.5 eV/atom the structures of all investigated clusters show the lowest similarity to the original structures, except for the case of nickel clusters deposited on a Cu(111) surface. Finally, it is demonstrated that when cluster and substrate are of different materials, it is possible to control whether the deposition results in largely intact clusters on the substrate or in a spreading of the clusters. This separation into hard and soft clusters can be related to the relative cohesive energy of the crystalline materials.     

The interplay between geometry,electronic structure,and reactivity of Cu-Ni bimetallic (111) surfaces

The mutual influence of surface geometry (e.g. lattice parameters, morphology) and electronic structure is discussed for Cu-Ni bimetallic (111) surfaces. It is found that on flat surfaces the electronic d-states of the adlayer experience very little influence from the substrate electronic structure which is due to their large separation in binding energies and the close match of Cu and Ni lattice constants. Using carbon monoxide and benzene as probe molecules, it is found that in most cases the reactivity of Cu or Ni adlayers is very similar to the corresponding (111) single crystal surfaces. Exceptions are the adsorption of CO on submonolayers of Cu on Ni(111) and the dissociation of benzene on Ni/Cu(111) which is very different from Ni(111). These differences are related to geometric factors influencing the adsorption on these surfaces. Received: 26 August 2002 / Accepted: 4 September 2002 / Published online: 5 February 2003 RID="*" ID="*"Corresponding author. Fax: +44-1223/76-2829, E-mail: gh10009@cam.ac.uk [+1pt] Present address: University of Cambridge, Lensfield Road, Department of Chemistry, Cambridge CB2 1EW, UK     

H_2在Ni,Pd与Cu表面的解离吸附

用EAM方法(embeded-atommethod)研究H_2在Ni,Pd与Cu的(100),(110)与(111)面上的解离吸附.首先通过拟合单个H原子在Ni,Pd与Cu不同表面上的吸附能和吸附键长,得到H与这些金属表面相互作用的EAM势,然后计算H_2在这些表面上以不同方式进行解离吸附时的活化势垒E_a,吸附热q_(ad)与吸附键长R.并给出H_2在(110)面上解离吸附的势能曲线.计算结果表明H_2的解离吸附与衬底种类、衬底表面取向及解离方式有关.H_2在Ni表面上解离时活化势垒很低,而在Cu表面解 关键词：     

The synthesis of methanol and the reverse water-gas shift reaction over Zn-deposited Cu(100) and Cu(110) surfaces: comparison with Zn/Cu(111)

The catalytic activity of Zn vapor-deposited Cu(100) and Cu(110) surfaces for methanol synthesis by the hydrogenation of CO₂ and the reverse water-gas shift reaction were studied using an XPS apparatus combined with a high-pressure flow reactor (18 atm). At a reaction temperature of 523 K, no promotional effect of Zn was observed for the methanol synthesis on both Zn/Cu(100) and Zn/Cu(110). The results were quite different from those for Zn/Cu(111), on which a significant promotion of methanol synthesis activity appeared to be due to the deposition of Zn, indicating that the promotional effect of Zn was sensitive to the surface structure of Cu. However, hysteresis was observed in the catalytic activity for methanol synthesis over the Zn/Cu(110) surface upon heating above 543 K in the reaction mixture. The activity became twice that measured before heating, which was close to the methanol synthesis activity of Zn/Cu(111) at the same Zn coverage. On the other hand, no such hysteresis was observed for the reverse water-gas shift reaction on Zn/Cu(110), indicating that the active site for methanol synthesis was not identical to that for the reverse water-gas shift reaction. In the post-reaction surface analysis, formate species was detected on both Zn/Cu(100) and Zn/Cu(110), whose coverage increased with increasing Zn coverage at 0<Θ_Zn<0.2. No correlation between the formate coverage and the methanol synthesis activity was obtained, which was in contrast to the results for Zn/Cu(111). Thus, the structure sensitivity observed in the catalytic activity of methanol synthesis over Zn-deposited Cu surfaces is ascribed to the significant difference in the reactivity of the formate intermediate.     

Ni(CO)4 formation on single Ni crystals: Reaction kinetics and observation of surface facetting induced by the reaction

We have studied the kinetics of the synthesis of nickel carbonyl (Ni + 4 CO → Ni(CO)₄), using single crystalline Ni surfaces of different crystallographic orientation. A dependence of the reaction rate on the crystallographic orientation of the surface has been observed. Scanning electron micrographs showed that a very sharp (111) facetting of the surface takes place during the reaction. A reaction mechanism for the Ni(CO)₄ formation, taking into account recent experimental data of the chemisorption of CO on Ni, is discussed, which may explain the kinetic results and the observed facetting.     

Adhesion and bonding of Pt/Ni and Pt/Co overlayers: Density functional calculations

The electronic and energetic properties of bimetallic surfaces Pt/Ni(111) and Pt/Co(111) are examined using the FP-LAPW (Full-PotentialLinearized Augmented Plane Wave) method by means of spin-polarized and non-polarized calculations. We present both the results of the shifts in the d-band centers when one metal (Pt) is pseudomorfically deposited on another with smaller lattice constant (Ni, Co) and those corresponding to the surface and adhesion energies. The surface is modeled by a seven layer slab separated in z direction by a vacuum region of six substrate layers. The results obtained for pure Ni, Co and Pt surfaces are presented in order to compare with experimental and theoretical data reported in the literature     

Oscillations in the compositional depth profile of Cu/Ni alloys: A study by UPS

The composition in the surface region of a (110) oriented single crystal of Cu/Ni alloy was studied by ultraviolet photoemission spectroscopy (UPS) in the energy range hv = 32–240 eV. The data indicate a surface enrichment of Cu and that the composition, as a function of depth below the surface, does not approach the bulk value in a monotonic manner but shows at least one oscillation. The depth sampled by the UPS experiment was varied by changing the photon energy and thus the escape length of the photoemitted electrons. Two surfaces of a single bulk crystal (bulk atomic composition 90% Ni and 10% Cu) were studied. One was the high temperature equilibrium surface (AES measurements yielded a surface composition of ~65% Cu and 35% Ni); the second surface was higher in Ni concentration (AES measurements gave ~65% Ni and 35% Cu) and was obtained by annealing at a lower temperature. Theories based on the quasi-chemical and regular solution models predict a surface enrichment of Cu for the alloy, but do not predict any oscillation in composition below the surface.     

Density functional theory calculation of platinum surface segregation energy in Pt3Ni (111) surface doped with a third transition metal

We have used density functional theory method to calculate the Pt surface segregation energy in the Pt₃Ni (111) surface doped with a third transition metal M and thus investigated the influence of component M on the extent of Pt segregation to the outermost layer of these Pt₃Ni/M (111) surface. As a third component in the Pt₃Ni/M (111) surface, V, Fe, Co, Mo, Tc, Ru, W, Re, Os, and Ir were predicted to lead to even more negative Pt surface segregation energies than that in the based Pt₃Ni (111) surface; Ti, Cr, Mn, Cu, Zr, Nb, Rh, Hf, and Ta would still retain the preference of Pt segregation to the surface but with less extent than the replaced Ni, while Pd, Ag, and Au would completely suppress the Pt segregation to the Pt₃Ni/M (111) surfaces. Furthermore, we examined the relation between the Pt surface segregation energy in the Pt₃Ni/M (111) surfaces and the material properties (lattice parameter, heat of solution, and Pt surface segregation energy) of binary alloys Pt₃M. It was found that the surface energy effect, strain effect, and heat of solution effect induced by the doped element M would collectively affect the Pt surface segregation energy in the Pt₃Ni/M (111) surfaces.     

A vibrational study of ammonia chemisorbed on Ni(110) and Ni(111): whither goest the metal-nitrogen stretching mode on FCC (111) surfaces?

The adsorption of ammonia on the Ni(110) and Ni(111) surfaces has been studied with high resolution (≤ 65 cm_?1) electron energy loss spectroscopy (EELS) combined with thermal desorption spectroscopy. The EELS spectra of the initial chemisorbed layer or α state on each surface are very different. Ammonia chemisorbed on the Ni(110) surface exhibits a strong Ni-N stretching mode at 570 cm^?1 which is absent on the Ni(111) surface. The Ammonia adsorption site appears to be different on the Ni(110) and Ni(111) surfaces. We suggest that the absence of the M-N stretching mode on the Ni(111) surface is a general characteristic of the ammonia adsorption site on the (111) surfaces of fcc Group VIII metals.     

Surface states on random substitutional alloys

We present first principles KKRCPA calculations of the angle-resolved photoemission spectra from CuNi single crystal surfaces. Two surface states have been identified; a Shockley-type state on the (111) surface, and a Tamm-type state on the (100) surface. We determine their dispersion, and investigate their sensitivity to the form of the surface potential. The disorder broadening and the influence of surface segregation are discussed quantitatively.     

A first principle study on the magnetic properties of Cu2O surfaces

Spin-polarized density functional theory calculations were performed to investigate the magnetism of bulk and Cu₂O surfaces. It is found that bulk Cu₂O, Cu/O-terminated Cu₂O(111) and (110) surfaces have no magnetic moment, while, the O-terminated Cu₂O(100) and polar O-terminated Cu₂O(111) surfaces have magnetism. For low index surfaces with cation and anion vacancy, we only found that the Cu vacancy on the Cu₂O(110) Cu/O-terminated surface can induce magnetism. For atomic and molecular oxygen adsorption on the low index surfaces, we found that atomic and molecular oxygen adsorption on the Cu-terminated Cu₂O(110) surface is much stronger than on the Cu/O-terminated Cu₂O(111) and Cu-terminated Cu₂O(100) surfaces. More interesting, O and O₂ adsorption on the surface of Cu/O terminated Cu₂O(111) and O₂ adsorption on the Cu-terminated Cu₂O(110) surface can induce weak ferromagnetism. In addition, we analysis origin of Cu₂O surfaces with magnetism from density of state, the surface ferromagnetism possibly due to the increased 2p–3d hybridization of surface Cu and O atoms. This is radically different from other systems previously known to exhibit point defect ferromagnetism, warranting a closer look at the phenomenon.     

A combined XPS/AES study of Cu segregation to the high and low index surfaces of a Cu-Ni alloy

Quantitative information was obtained regarding the equilibrium segregation of Cu to the high index surfaces (cut 5° off the (100) plane in the [001] and [011] directions) and low index surfaces ((100), (111) and (110)) of a Cu: Ni, 5: 95% alloy crystal. Data regarding segregation to the (111) surface of a Cu: Ni, 50: 50% alloy crystal was also obtained. Equilibrium surfaces were obtained by careful annealing in the temperature range 850–920 K to avoid Cu loss by evaporation. The surface composition profile was calculated using data from the combination of the X-ray Photo-electron Spectroscopy and Auger Electron Spectroscopy techniques. Using these techniques, a wide range of electron kinetic energies and associated electron escape depths can be probed, yielding information about the topmost layer concentration and about the concentration profile into the bulk. Extensive Cu segregation was observed for the 5% and 50% Cu alloys. Topmost layer compositions of 85–100% Cu were found for both the high and low index surfaces of the 5% Cu alloy. In the next two or three atomic layers the composition was found to drop swiftly to near bulk Cu levels. For atomic layers deeper than this, some experimental evidence suggested a rise in Cu composition over three or four layers to 8–17% Cu before bulk levels were finally regained. For the 50% Cu alloy sample, a topmost layer composition was found of 95–100% Cu. Bulk levels of Cu were regained in about four atomic layers. These results are discussed in relation to other theoretical and experimental studies of segregation in these Cu-Ni alloys. The significance of the measured composition in relation to an equilibrium surface is also considered.     

Effects of bimetallic modification on the decomposition of CH3OH and H2O on Pt/W(110) bimetallic surfaces

The decomposition pathways of methanol and water on Pt-modified W(110) bimetallic surfaces have been investigated using density functional theory (DFT), temperature-programmed desorption (TPD) and high-resolution electron energy loss spectroscopy (HREELS). The reaction of methanol on submonolayer and monolayer Pt-modified W(110) surfaces is compared to that on clean Pt(111) and W(110). Similar to clean W(110), the Pt/W(110) bimetallic surfaces remain active toward the dissociation of methanol, although the reaction pathway leading to the production of CH₄ is reduced on the bimetallic surfaces. The Pt/W(110) surfaces are also active toward the decomposition of water. These results are compared with previous studies of the reactions of H₂ and ethylene on Pt/W(110) bimetallic surfaces to reveal the different Pt-modification effects for the dissociation of oxygen-containing molecules.     

Atomic approximation for alloys and their surfaces

We report a simple, ab initio method for calculating the electronic structure of compositionally disordered alloys. Results are shown for Cu/Ni and Ag/Pd bulk systems, and the first calculations are reported for the surface electronic structure of random alloys, exemplified by {111} surface states of Cu/Ni and Cu/Al alloys.     

ESR of adsorbates on single crystal metal surfaces under UHV conditions

Angular dependent electron spin resonance measurements were taken for paramagnetic molecules adsorbed on metallic single crystal surfaces in UHV. For the hydrated Cu(NO₃)₂ complex on a Cu[111] surface an angular dependent ESR signal is recorded. The plane ofthe molecule is found to lie preferentially out of the surface plane. Experiments on chemisorbed molecular O₂ on Ag[110] at 25 K and NO on Pt[111] at 110 K show no sharp ESR signal characteristic for well localized moments. If one assumes that NO on Pt (respectively Pd) carries an unpaired spin, one can estimate a lower limit for the spin flip rate of π^?1>2×10⁹s^?.     

Phonon spectra of clean and Ni-terminated diamond (111) surfaces: An ab-initio study

The phonon densities of states (ph-DOSs) of clean and Ni-terminated C(111) surfaces with 1 × 1 and 2 × 1 surface structures were investigated using ab-initio density functional perturbation theory. The ph-DOSs showed vibrational spectra associated with the surface structures of C(111) and Ni/C(111). Further analyses of various surface phonon modes were performed to identify vibrational features involving the surface atoms of C(111) and Ni/C(111). These features provide important information for experimentally verifying the formation of a diamond bulk-like structure at Ni/C(111), as suggested in a previous study.     

NO dissociation on Cu(111) and Cu2O(111) surfaces: a density functional theory based study

NO dissociation on Cu(111) and Cu(2)O(111) surfaces is investigated using spin-polarized density functional theory. This is to verify the possibility of using Cu-based catalyst for NO dissociation which is the rate limiting step for the NO(x) reduction process. The dissociation of molecularly adsorbed NO on the surface is activated for both cases. However, from the reaction path of the NO-Cu(2)O(111) system, the calculated transition state lies below the reference energy which indicates the possibility of dissociation. For the NO-Cu(111) system, the reaction path shows that NO desorption is more likely to occur. The geometric and electronic structure of the Cu(2)O(111) surface indicates that the surface Cu atoms stabilize themselves with reference to the O atom in the subsurface. The interaction results in modification of the electronic structure of the surface Cu atoms of Cu(2)O(111) which greatly affects the adsorption and dissociation of NO. This phenomenon further explains the obtained differences in the dissociation pathways of NO on the surfaces.