The advantages and disadvantages of direct and indirect calorimetry

Kleiber's definitions of what constitutes direct and indirect calorimetry are accepted as the beginning of a commentary on the advantages and disadvantages of direct and indirect calorimetry in which calorimetry is divided into a number of categories based on the kind of calorimetric measurement. For non-reaction calorimetry such as entropy determinations and differential scanning calorimetry, the only means of measurement is by direct calorimetry. For reaction calorimetry, a preference of direct over indirect calorimetry depends on the accuracy needed and the ability of the experimenter to define the system. The data necessary to correct the observed heat loss in direct calorimetry are often all that are needed to make an indirect calculation of the true heat loss. In general, because they are convenient and inexpensive to use, indirect calorimetric methods are preferable to direct methods. However, when possible, one method can be used to verify the results of the other.     

Internal Nucleophilic Catalyst Mediated Cyclisation/Ring Expansion Cascades for the Synthesis of Medium‐Sized Lactones and Lactams

A strategy for the synthesis of medium‐sized lactones and lactams from linear precursors is described in which an amine acts as an internal nucleophilic catalyst to facilitate a novel cyclisation/ring expansion cascade sequence. This method obviates the need for the high‐dilution conditions usually associated with medium‐ring cyclisation protocols, as the reactions operate exclusively via kinetically favourable “normal”‐sized cyclic transition states. This same feature also enables biaryl‐containing medium‐sized rings to be prepared with complete atroposelectivity by point‐to‐axial chirality transfer.     

Effect of sizing materials of carbon fiber on solid-state cure of poly(p-phenylene sulfide)

The effect of sized carbon fibers on the solid-state cure of poly(p-phenylene sulfide) (PPS) was studied using differential scanning calorimetry. PPS resin reinforced with sized carbon fiber exhibited the largest cure peak for all cure temperatures and showed a second peak at low cure temperature which was absent in both PPS reinforced with desized carbon fiber and neat PPS resin. In a separate experiment in which epoxy prepolymer/PPS mixture was cured, the exothermic reaction was related to the presence of the epoxy sizing used on the carbon fiber. © 1998 John Wiley & Sons, Ltd.     

Gold‐Catalyzed 1,2‐Acyloxy Migration/Intramolecular [3+2] 1,3‐Dipolar Cycloaddtion Cascade Reaction: An Efficient Strategy for Syntheses of Medium‐Sized‐Ring Ethers and Amines

A highly efficient strategy for the formation of medium‐sized‐ring ethers and amines based on a gold‐catalyzed cascade reaction, involving enynyl ester isomerization and intramolecular [3+2] cyclization, has been developed. Various multisubstituted medium‐sized‐ring unsaturated ethers and amines were obtained through this transformation. This method represents one of the relatively few transition metal catalyzed intramolecular cycloaddition reactions for medium‐sized ring synthesis.     

Self-aggregation of ionic C(10) surfactants having different headgroups with special reference to the behavior of decyltrimethylammonium bromide in different salt environments: a calorimetric study with energetic analysis

Self-aggregation of C10 ionic surfactants with different head groups, viz., decylpyridinium chloride, sodium decylsulfate, decylammonium bromide, decyldimethylammonium bromide, and decyltrimethylammonium bromide, was studied in the aqueous medium by microcalorimetric and conductometric methods. The effects of temperature and different salts (NaF, NaCl, NaBr, NaI, Na2SO4, Na2S2O7, Na-benzoate, and Na-salicylate) were also studied on decyltrimethylammonium bromide representatives. The cmc, counterion binding, and energetics of micellization were evaluated and discussed. The energetic parameters, enthalpy, entropy, and specific heat of micellization obtained from direct calorimetry and the indirect van't Hoff method were compared and discussed.     

Iridium‐Catalyzed Enantioselective Synthesis of Pyrrole‐Annulated Medium‐Sized‐Ring Compounds

Enantioselective synthesis of pyrrole‐annulated medium‐sized‐ring compounds by an iridium‐catalyzed allylic dearomatization/retro‐Mannich/hydrolysis sequence is presented. Various substituted pyrrole‐annulated seven‐ and eight‐membered‐ring products were obtained under mild reaction conditions with moderate to good yields and excellent enantioselectivity. Additionally, these products contain a scaffold widely distributed in natural products and biologically active compounds. The current method provides a convenient way for accessing such pyrrole‐anuulated medium‐sized‐ring compounds.     

Photopolymerized sol–gel monoliths for separations of glycosylated proteins and peptides in microfluidic chips

Photopolymerized silica sol–gel monoliths, functionalized with boronic acid ligands, have been developed for protein and peptide separations in polydimethylsiloxane microfluidic devices. Pore size characterization of the monoliths was carried out with SEM, image analysis, and differential scanning calorimetry to evaluate both the micron‐sized macropores and the nanometer‐sized mesopores. Monoliths were functionalized with boronic acid using three different immobilization techniques. Batch experiments were conducted to determine the capacity of the monoliths and selectivity toward cis‐diol‐containing compounds. Conalbumin was used as a model glycoprotein, and a tryptic digest of the glycoprotein horseradish peroxidase was used as a peptide mixture to demonstrate proof‐of‐concept extraction of glycoproteins and glycopeptides by the monoliths formulated in polydimethylsiloxane microfluidic chips. For proteins, fluorescence detection was used, whereas the peptide separations employed off‐line analysis using MALDI‐MS.     

X-ray fluorescence analysis of airborn particulates in an industrial Greek city

Photon induced X-ray fluorescence is used at a medium sized Greek industrial city, to detect trace elements with 20≤Z≤40 in airborn particulates collected on filter papers.     

Étude thermochimique des sels de nickel et de cuivre de quelques amino-acides

Standard enthalpies of formation of:nickel and copper salts of several amino acids (α-alanine, valine, norvaline, isoleucine, norleucine);mixed complexes of copper:. Cu(α-alanine) (valine), Cu(α-alanine) (isoleucine), and Cu(valine) (isoleucine) are determined by calorimetry.The variations of enthalpy linked to the transformation of amminated and hydrated salts of the valine and of the isoleucine into the corresponding anhydrous compounds were determined by two different procedures: indirect calorimetry and differential calorimetric analysis.     

Non‐empirical calculations of NMR indirect carbon–carbon coupling constants: 1. Three‐membered rings

The carbon–carbon indirect nuclear spin–spin coupling constants in cyclopropane, aziridine and oxirane were investigated by means of ab initio calculations at the RPA, SOPPA and DFT/B3LYP levels. We found that the carbon–carbon couplings are by far dominated by the Fermi contact term. Our best SOPPA and DFT results are in a very good agreement with each other and with the experimental values, whereas calculations at the RPA level of theory strongly overestimate the carbon–carbon couplings. Significant differences in the basis set dependence of the calculated carbon–carbon coupling constants obtained with either wavefunction method, RPA or SOPPA, or the density functional method, DFT/B3LYP, are observed. The SOPPA results depend much more strongly on the quality of the basis set than the results of DFT/B3LYP calculations. The medium‐sized core‐valence basis sets cc‐pCVTZ and even cc‐pCVDZ were found to perform fairly well at the SOPPA level for the one‐bond carbon–carbon couplings investigated here. Copyright © 2002 John Wiley & Sons, Ltd.     

Offset‐compensated and zero‐quantum suppressed ROESY provides accurate 1H–1H distances in small to medium‐sized molecules

A robust version of the off‐resonance ROESY pulse scheme is suggested for the measurement of proton–proton distances or slow chemical exchange in small to medium‐sized molecules. The method implements adiabatic ramps to establish a pair of opposite frequency off‐resonance spin lock fields – with optionally randomized duration – and adiabatic inversion pulses with simultaneous gradients for efficient zero‐quantum suppression. The amended pulse sequence yields pure absorption cross‐peaks and works safely for small to medium‐sized molecules. The applicability of the method has been demonstrated using small, rigid molecules (strychnine and codeine) and was also applied for a cyclic peptide and a small protein. We found that the pure phase cross‐peaks of the new ROESY version are beneficial for distance measurements. The one‐dimensional (selective) version of the new method is also powerful for measuring selected pair‐wise interactions and distance determination. Copyright © 2016 John Wiley & Sons, Ltd.     

Ring strain energies: substituted rings, norbornanes, norbornenes and norbornadienes

Ring strain energies (RSEs) are predicted using homodesmotic reactions at the B3LYP/6-31G^* level of theory. Substituents are conserved in the acyclic reference and any difference in energy between the ring and the acyclic reference corresponds exclusively to RSE. Small rings are stabilized by alkyl substituents and this stabilization decreases as the size of the ring increases. There is a destabilization of medium sized rings. Greater stabilization is found upon alkyl substitution at a double bond in an unsaturated ring and this stabilization decreases as ring size increases. The effects of cis-1,2-disubstitution on RSEs have been evaluated and indicate stabilization for both small and medium sized rings. RSEs of saturated and unsaturated polycyclic systems agree well with the RSEs derived from experimental thermochemical data. RSEs are reported for substituted norbornanes, norbornenes, and norbornadienes to complement experimental studies.     

Transcrystallinity in polypropylene

A study using hot-stage microscopy and differential scanning calorimetry in assessing the ability of a number of substrates to nucleate transcrystalline growth in polypropylene is reported. Surface energy, chemical composition, crystal morphology, and moisture content of the substrate are discounted as being of importance in determining the ability of a substrate to nucleate polypropylene. It is concluded that surface topography plays a major role and it is argued that a prealignment of polymer chains occur in suitably sized cracks or channels on the surface. The rate of cooling the melt also dramatically influences the nucleating activity of a surface and this is ascribed to interfacial stresses resulting from differential contraction.     

A Migratory Ether Formation Route to Medium‐Sized Sugar Mimetics

Polyol‐substituted cyclic ethers are fundamental building blocks of biomolecules. The position and stereochemistry of multiple hydroxy substituents of cyclic ethers play a central role in their biological function. Current methods for the synthesis of such structures are limited to “naked” ring products with no or few substituents. Here we describe a general route to medium‐sized polyol cyclic ethers using a migratory ether formation strategy. In contrast to the common pathway of direct opening of epoxides, Me₃Al was found to promote an unprecedented ether addition reaction, opening a neighboring epoxide. The resulting oxonium intermediate triggers a 1,3‐methyl shift to yield 2‐deoxyribital products. When the hemiacetal auxiliary is a monosaccharide, the sugar ring is expanded by four atoms to give the corresponding 9‐ to 11‐membered analogues. This method provides an entry into the untapped chemical space of medium‐sized sugar mimetics.     

Efficient and Divergent Synthesis of Medium‐Sized Lactams through Zinc‐Catalyzed Oxidative Cyclization of Indoly Ynamides†

An efficient zinc‐catalyzed oxidative cyclization of readily available indoly ynamides has been developed, enabling rapid and practical access to a diverse array of valuable medium‐sized lactams in mostly good to excellent yields with wide substrate scope. In addition, such an asymmetric synthesis has also been explored by employing the chiral substrate.     

Co‐Conformational Distribution of Nanosized [2]Catenanes Determined by Pulse EPR Measurements

The co‐conformational ensembles of three differently sized [2]catenanes were studied by measuring pair correlation functions corresponding to the separation of nitroxide spin labels—one attached to each of the two macrocycles—with the double electron–electron resonance (DEER) experiment. A geometric model for the [2]catenanes was derived that approximates the macrocycles by circles and takes into account the topological constraint. Comparison of the experimental to the theoretically predicted pair correlation functions gives insight into the co‐conformational distribution and the size of the macrocycles. It was found that the macrocycles of the medium‐ and large‐sized catenanes in chloroform are close to fully expanded, while they are partially collapsed in glassy o‐terphenyl. For the small‐sized catenane, moderate interaction between the unsaturated sections of the macrocycles in chloroform is indicated by a slight overrepresentation of short label‐to‐label separations in the pair correlation function.     

Enantioselective Synthesis of Medium‐Sized Lactams via Chiral α,β‐Unsaturated Acylammonium Salts

Medium‐sized lactams are important structural motifs found in a variety of bioactive compounds and natural products but are challenging to prepare, especially in optically active form. A Michael addition/proton transfer/lactamization organocascade process is described that delivers medium‐sized lactams, including azepanones, benzazepinones, azocanones, and benzazocinones, in high enantiopurity through the intermediacy of chiral α,β‐unsaturated acylammonium salts. An unexpected indoline synthesis was also uncovered, and the benzazocinone skeleton was transformed into other complex heterocyclic derivatives, including spiroglutarimides, isoquinolinones, and δ‐lactones.     

Double icosahedron‐based motif of Nin (n = 20−30)

A genetic algorithm (GA) coupled with a tight‐binding (TB) interatomic potential was used to search for the low‐energy structures of the medium‐sized Ni_n (n = 20?30) clusters. The low‐energy candidate structures from the GA/TB search were further optimized by using the density functional theory calculations with the Perdew, Burke, and Ernzerhof exchange‐correlation energy functional. The obtained lowest‐energy structures of the medium‐sized Ni_n (n = 20?30) clusters are shown to exhibit double icosahedron‐based motif. The properties of the nickel clusters including binding energies, second differences in energy, and especially magnetic properties have also been studied. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2012     

A general approach to medium ring alkynes by using metathesis of cobalt hexacarbonyl containing dienes

The assembly of medium sized rings (7-9) was achieved by using the metathesis of dienes linked by a cobalt hexacarbonyl complexed alkyne with either Grubbs' or Schrock's catalysts. The products of metathesis were subjected to transformations involving the dicobalt hexacarbonyl complexes, for example, decomplexation to liberate cyclic alkynes or Pauson-Khand reaction.     

Effect of Cooling Fluid Flow Rate on the Estimation of Conversion by Calorimetry in a Lab-Scale Reactor

Significant information about polymerization reactions carried out in lab-scale reactors is lost because sampling is not always possible due to the high viscosity, heterogeneity of the reaction medium or pressurization of the reactor. Thus, monitoring these reactions through calorimetry technique could be very valuable. Nevertheless, standard lab-scale reactors can present a relatively high residence time of the cooling fluid in the jacket and significant heat loss of the jacket to the surroundings. In the present work, the effect of the cooling fluid flow rate on the estimation of conversion through isothermal and isoperibolic calorimetry during a batch emulsion polymerization was investigated. Results show that the estimation of conversion through isothermal and isoperibolic calorimetry was not significantly affected by the cooling fluid flow rate using heat flow calorimetry. Nevertheless, when employing the energy balance of the jacket and the estimation of the global heat exchange coefficient between the jacket and the surroundings to estimate conversion (heat balance calorimetry) better results were obtained for lower cooling fluid flow rates.