Kinetics Driven by Hollow Nanoreactors: An Opportunity for Controllable Catalysis

As a novel class of catalytic materials, hollow nanoreactors offer new opportunities for improving catalytic performance owing to their higher controllability on molecular kinetic behavior. Nevertheless, to achieve controllable catalysis with specific purposes, the catalytic mechanism occurring inside hollow nanoreactors remains to be further understood. In this context, this Review presents a focused discussion about the basic concept of hollow nanoreactors, the underlying theory for hollow nanoreactor-driven kinetics, and the intrinsic correlation between key structural parameters of hollow nanoreactors and molecular kinetic behaviors. We aim to provide in-depth insights into understanding kinetics occurred within typical hollow nanoreactors. The perspectives proposed in this paper may contribute to the development of the fundamental theoretical framework of hollow nanoreactor-driven catalysis.     

智能中空药物载体的门控设计

由于具有独特新颖的结构和广泛的应用领域,中空材料已成为合成化学和材料化学研究的热点;特别是其高的表面体积比、低密度及大空腔等特点,成为药物递送载体的最佳选择.通过对中空结构的精确选择和精准修饰,可赋予中空材料独特的刺激响应行为,从而实现该类药物载体的智能设计和药物的可控释放.目前,构建中空智能载体主有以下两条思路:(1)利用自身可对环境中的物理化学刺激做出响应的中空材料作为载体;(2)在中空载体表面修饰功能性分子,以实现在特定的刺激下精确控制孔道的“开-关”转换.其核心在于分子组成和构型的精准调控.基于此,本文综合评述了中空智能载体的可控释放机制.首先介绍中空药物载体的发展历史,随后阐述药物分子在中空结构中的扩散规律,并总结了中空结构载体的智能响应行为、不同的门控机制、控制释放原理以及应用前景,最后对未来的发展做了展望.     

Fabrication of functional hollow carbon spheres with large hollow interior as active colloidal catalysts

In this study,we have established a facile method to synthesize functional hollow carbon spheres with large hollow interior,which can act as active colloidal catalysts.The method includes the following steps:first,hollow polymer spheres with large hollow interior were prepared using sodium oleate as the hollow core generator,and 2,4-dihydroxybenzoic acid and hexamethylene tetramine(HMT) as the polymer precursors under hydrothermal conditions;Fe 3+ or Ag + cations were then introduced into the as-prepared hollow polymer spheres through the carboxyl groups;finally,the hollow polymer spheres can be pseudomorphically converted to hollow carbon spheres during pyrolysis process,meanwhile iron or silver nanoparticles can also be formed in the carbon shell simultaneously.The structures of the obtained functional hollow carbon spheres were characterized by TEM,XRD,and TG.As an example,Ag-doped hollow carbon spheres were used as colloid catalysts which showed high catalytic activity in 4-nitrophenol reduction reaction.     

A new simple method to prepare hollow PES microspheres

A new simple method for the formation of hollow polyethersulfone (PES) microspheres was reported in this paper. Coaxial electrospraying equipment and nonsolvent precipitating bath were used to produce hollow microspheres in one step. The properties of the core solution affected the formation of hollow PES microspheres. To form hollow microspheres in one step, the core solution should be removed directly by a nonsolvent. Additionally, the core solution should also be used to occupy the internal space of microspheres and form a supporting layer at the interface between the core solution and the shell solution. The supporting layer formed by the micro-phase that was caused by the phase separation of the core or shell solution was the key factor for the formation of hollow PES microspheres. The performance of hollow microspheres produced by this method was excellent. This method provided a new simple way to form hollow polymer microspheres and can be extended to other polymers to prepare hollow microspheres in one step.     

General sacrificial template method for the synthesis of cadmium chalcogenide hollow structures

Semiconductor CdX (X=Te, Se, S) hollow structures have been successfully prepared by using Cd(OH)Cl precursors as a sacrificial template. The hollow structures can be hollow spheres or tubes by controlling the shape of the sacrificial template. The products were characterized by X-ray diffraction, transmission electron microscopy, scanning electron microscopy, and energy-dispersive spectrometry. The obtained results showed that the hollow structures had complementary shapes and sizes of the original sacrificial templates. This is a general method for the synthesis of cadmium chalcogenide hollow structures, and the method is simpler and more practical than direct synthesis of certain hollow structures, which further widens the avenue to using those materials that have been synthesized with various shapes to fabricate specific hollow structures.     

Synthesis and utilization of monodisperse hollow polymeric particles in photonic crystals

We developed a process to fabricate 150-700 nm monodisperse polymer particles with 100-500 nm hollow cores. These hollow particles were fabricated via dispersion polymerization to synthesize a polymer shell around monodisperse SiO(2) particles. The SiO(2) cores were then removed by HF etching to produce monodisperse hollow polymeric particle shells. The hollow core size and the polymer shell thickness, can be easily varied over significant size ranges. These hollow polymeric particles are sufficiently monodisperse that upon centrifugation from ethanol they form well-ordered close-packed colloidal crystals that diffract light. After the surfaces are functionalized with sulfonates, these particles self-assemble into crystalline colloidal arrays in deionized water. This synthetic method can also be used to create monodisperse particles with complex and unusual morphologies. For example, we synthesized hollow particles containing two concentric-independent, spherical polymer shells, and hollow silica particles which contain a central spherical silica core. In addition, these hollow spheres can be used as template microreactors. For example, we were able to fabricate monodisperse polymer spheres containing high concentrations of magnetic nanospheres formed by direct precipitation within the hollow cores.     

模板法制备复合中空微球

本文报道以一种商品化的聚苯乙烯中空球为模板, 采用溶胀聚合技术合成了具有IPN(Inter-Penetrating Network)结构的复合中空球; 对其中的一种高分子网络进行化学改性引入所需官能团, 制得带有羧基的聚合物凝胶中空球; 利用凝胶诱导生长特性, 成功制得聚合物复合中空球. 此方法无需去除模板就可批量制备各种复合功能中空球.     

反应性模板法合成硫化银中空球-银纳米粒子异质结构

以Cu₂S中空球为反应性模板, 通过在水溶液中与银离子的阳离子交换和氧化还原反应制备了大小均匀的Ag₂S中空球-Ag纳米粒子异质结构, 即Ag₂S-Ag异质中空球. 该异质结构中每个Ag₂S中空球的直径约为600 nm, 壁厚约20–30 nm, 其表面均附着一个Ag纳米粒子. 采用扫描电子显微镜(SEM)、透射电子显微镜(TEM)、X射线衍射(XRD)和能量色散X射线谱(EDS)对所得Ag₂S-Ag异质中空球的结构和组成进行了表征. 若以CuS中空球为反应性模板, 在相似转化条件下则主要得到不含Ag粒子的Ag₂S中空球. 该结果表明, Cu₂S中的Cu(I)的还原性在Ag₂S-Ag异质中空球的形成中发挥了重要作用. 通过对所制备的Ag₂S-Ag异质中空球进行二次生长, 还可以得到Ag₂S中空球的半球表面均被Ag膜所包覆的Ag₂S-Ag异质中空球.     

中空纳米材料的构建原理及其在光催化制氢和二氧化碳还原反应中的应用

随着全球经济的快速发展,能源短缺与环境污染成为当今世界共同关注的热点问题,开发和利用洁净能源成为当务之急.近年,以半导体为基础的光催化技术引起了国内外的广泛关注,其中包括光催化分解水制氢、光催化还原CO2、光催化固氮以及光催化降解污染物等.尤其太阳能驱动的光催化分解水和光催化CO2还原均可将太阳能转化为可储存和运输的化...     

Micro- and nano-scale hollow TiO2 fibers by coaxial electrospinning: Preparation and gas sensing

We report the preparation of micro- and nano-scale hollow TiO₂ fibers using a coaxial electrospinning technique and their gas sensing properties in terms of CO. The diameter of hollow TiO₂ fibers can be controlled from 200 nm to several micrometers by changing the viscosity of electrospinning solutions. Lower viscosities produce slim hollow nanofibers. In contrast, fat hollow microfibers are obtained in the case of higher viscosities. A simple mathematical expression is presented to predict the change in diameter of hollow TiO₂ fibers as a function of viscosity. The successful control over the diameter of hollow TiO₂ fibers is expected to bring extensive applications. To test a potential use of hollow TiO₂ fibers in chemical gas sensors, their sensing properties to CO are investigated at room temperature.     

Template synthesis of hydrogel composite hollow spheres against polymeric hollow latex

Hierarchically structured hydrogel hollow spheres with functional hydrogels located at desired sites are expected to have new properties. We have developed a facile swelling polymerization route using a polymer hollow sphere as template to synthesize hierarchically structured hydrogel hollow spheres. It is significant to pre-swell the template shell with good solvents, such as chloroform containing oil-soluble initiators to control interaction, thus, polymerization locus of different water-soluble functional monomers. Some representative hydrogel composite hollow spheres such as poly(N-isopropylarylamide) and poly(acrylic acid) with different morphologies have been synthesized. Hydrogels with functional groups can favorably complex with desired materials; hierarchically structured inorganic or polymer composite hollow spheres are synthesized by a sol–gel process of the inorganic precursor by using different hydrogel composite hollow spheres as templates.     

Blood flow and oxygen transfer rate of an outside blood flow membrane oxygenator

We evaluated effects of the number of tied hollow fibers of an outside blood flow membrane oxygenator with cross-wound hollow fibers on the blood flow pattern and oxygen transfer rate. The number of tied hollow fibers in a bundle was varied from one to six, and the blood flow pattern was observed by X-ray computed tomography. The oxygen transfer rate and blood pressure drop were measured by in vitro experiments using bovine blood. Uniform blood flow patterns were obtained for each number of tied hollow fibers. A decrease in the number of tied hollow fibers caused more effective contact of blood with the tied hollow fibers and oxygen transfer rate was enhanced, demonstrating that single hollow fiber was the most effective. Empirical equations were obtained based on these results and optimum structure parameters of the membrane oxygenator were determined by simulation analysis. Optimum membrane surface area and axial jacket length of the oxygenator were 3.0 m² and 320 mm, respectively, at a hollow fiber outside diameter of 250 μm.     

Synthesis of Porous,Hollow Metal MCO3 (M=Mn,Co, Ca) Microstructures and Adsorption Properties Thereof

Porous, hollow metal carbonate microstructures show many unique properties, and are attractive for various applications. Herein, we report the first demonstration of a general strategy to synthesize hollow metal carbonate structures, including porous MnCO₃ hollow cubics, porous CoCO₃ hollow rhombuses and porous CaCO₃ hollow capsules. For example, the porous, hollow MnCO₃ microcubes show larger Brunauer–Emmett–Teller (BET) surface areas of 359.5 m² g^?1, which is much larger than that of solid MnCO₃ microcubics (i.e., 12.03 m² g^?1). As a proof of concept, these porous MnCO₃ hollow microcubes were applied to water treatment and exhibited an excellent ability to remove organic pollutants in waste water owing to their hollow structure and large specific surface area.     

Versuche mit einem tiefgekühlten zwillingshohlkathoden interferometer-spektrometer—I

This work deals with the development of a set of twin hollow cathode tubes cooled by liquid air. The paper describes the construction of the hollow cathode device, the vacuum system and the current supply unit. The hollow cathode device is coupled to an interferometerspectrometer. The authors propose to use this arrangement for studying excitation processes in hollow cathode discharges and to apply it for emission spectrometric analysis.     

Sonochemical preparation of hollow nanospheres and hollow nanocrystals

Ceramic hollow spheres of MoS2 and MoO3 were obtained by sonochemical synthesis of MoS2 and MoO3 templated on silica nanoparticles (diameters 50-500 nm) followed by acid etching to remove the silica core. The resulting hollow materials have been characterized by elemental analysis, XPS, SEM, TEM, optical absorption, and hydrodesulfurization (HDS) studies. The TEM studies on the hollow ceramic materials indicate the formation of dispersed free spheres with a hollow core. The hollow materials obtained from thermally treated MoS2/SiO2 (450-700 degrees C) show the formation of layered MoS2 (lattice fringes approximately 6.2 A) with a wall thickness of 6-8 layers. The MoS2 hollow spheres are extremely active catalysts for the HDS of thiophene. Hollow spheres of MoO3 are prepared in a similar fashion. Surprisingly, upon heating, hollow crystals of MoO3 with sharp-edged truncated cubes containing inner voids are formed from the initial spheres.     

Bowl‐like SnO2@Carbon Hollow Particles as an Advanced Anode Material for Lithium‐Ion Batteries

Despite the great advantages of hollow structures as electrodes for lithium‐ion batteries, one apparent common drawback which is often criticized is their compromised volumetric energy density due to the introduced hollow interior. Here, we design and synthesize bowl‐like SnO₂@carbon hollow particles to reduce the excessive hollow interior space while retaining the general advantages of hollow structures. As a result, the tap density can be increased about 30 %. The as‐prepared bowl‐like SnO₂@carbon hollow particles with conformal carbon support exhibit excellent lithium storage properties in terms of high capacity, stable cyclability and excellent rate capability.     

Controllable synthesis and photoluminescence of single-crystalline BaHfO3 hollow micro- and nanospheres

This paper presents a facile hydrothermal route to synthesize monodispersive and single-crystalline BaHfO(3) hollow micro- and nanospheres in a concentrated basic environment. The hollow spheres were size tunable from submicrometer to nanoscale by simply adjusting the base concentration at a suitable temperature. The base concentration played the key role on forming BaHfO(3) hollow spheres. Detailed investigations on base concentration, reaction temperature, and duration indicated that the formation of BaHfO(3) hollow spheres was driven by Ostwald ripening process. Because of the abundance of defects, the as-prepared BaHfO(3) hollow nanospheres exhibited a blue light emission under UV-light excitation at room temperature. Calcination led to the photoluminescence declination due to the decrease of defects.     

A general method for the rapid synthesis of hollow metallic or bimetallic nanoelectrocatalysts with urchinlike morphology

We have reported a facile and general method for the rapid synthesis of hollow nanostructures with urchinlike morphology. In-situ produced Ag nanoparticles can be used as sacrificial templates to rapidly synthesize diverse hollow urchinlike metallic or bimetallic (such as Au/Pt) nanostructures. It has been found that heating the solution at 100 degrees C during the galvanic replacement is very necessary for obtaining urchinlike nanostructures. Through changing the molar ratios of Ag to Pt, the wall thickness of hollow nanospheres can be easily controlled; through changing the diameter of Ag nanoparticles, the size of cavity of hollow nanospheres can be facilely controlled; through changing the morphologies of Ag nanostructures from nanoparticle to nanowire, hollow Pt nanotubes can be easily designed. This one-pot approach can be extended to synthesize other hollow nanospheres such as Pd, Pd/Pt, Au/Pd, and Au/Pt. The features of this technique are that it is facile, quick, economical, and versatile. Most importantly, the hollow bimetallic nanospheres (Au/Pt and Pd/Pt) obtained here exhibit an area of greater electrochemical activity than other Pt hollow or solid nanospheres. In addition, the approximately 6 nm hollow urchinlike Pt nanospheres can achieve a potential of up to 0.57 V for oxygen reduction, which is about 200 mV more positive than that obtained by using a approximately 6 nm Pt nanoparticle modified glassy carbon (GC) electrode. Rotating ring-disk electrode (RRDE) voltammetry demonstrates that approximately 6 nm hollow Pt nanospheres can catalyze an almost four-electron reduction of O(2) to H(2)O in air-saturated H(2)SO(4) (0.5 M). Finally, compared to the approximately 6 nm Pt nanoparticle catalyst, the approximately 6 nm hollow urchinlike Pt nanosphere catalyst exhibits a superior electrocatalytic activity toward the methanol oxidation reaction at the same Pt loadings.     

胶质碳球为模板制备NiO空心球

以胶质碳球为模板、六亚甲基四胺为沉淀剂,在乙醇中溶剂热反应,再经500℃煅烧6 h制备了NiO空心球。通过X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、傅里叶变换红外光谱(FTIR)和低温氮吸附-脱附,对NiO的结构和形貌进行了表征。结果表明溶剂热反应时间是制备完整NiO空心球的关键因素,溶剂热反应12 h,再经空气中煅烧,可制得形貌均一的NiO空心球。所得产物是由NiO纳米粒子组装而成的具有多孔结构的空心球。同时,本文对NiO空心球结构的形成过程和可能机理进行了分析和讨论。     

One-step synthesis of SnO2 and TiO2 hollow nanostructures with various shapes and their enhanced lithium storage properties

A versatile one-step method for the general synthesis of metal oxide hollow nanostructures is demonstrated. This method involves the controlled deposition of metal oxides on shaped α-Fe(2)O(3) crystals which are simultaneously dissolved. A variety of uniform SnO(2) hollow nanostructures, such as nanococoons, nanoboxes, hollow nanorings, and nanospheres, can be readily generated. The method is also applicable to the synthesis of shaped TiO(2) hollow nanostructures. As a demonstration of the potential applications of these hollow nanostructures, the lithium storage capability of SnO(2) hollow structures is investigated. The results show that such derived SnO(2) hollow structures exhibit stable capacity retention of 600-700?mA h g(-1) for 50?cycles at a 0.2?C rate and good rate capability at 0.5-1?C, perhaps benefiting from the unique structural characteristics.