Titanium compounds as coatings on polystyrene latices and as hollow spheres

Sub-micron-sized anionic polystyrene latices have been coated with uniform layers of amorphous titanium dioxide by hydrolysis of titanium tetrabutoxide in ethanolic solutions containing the polymer cores. The thickness of the coating layer could be altered by adjusting the concentration of titanium tetrabutoxide and the amount of polymer latex added to the system. Hollow colloidal spheres of crystal titanium dioxide were obtained by calcination of the so-coated polystyrene latices at an elevated temperature. Received: 29 July 1999/Accepted in revised form: 15 October 1999     

Preparation and coating of finely dispersed drugs 4. Loratadine and danazol

The preparation of colloidal particles of different morphologies, including spheres, of two drugs, loratadine and danazol, is described. In principle these particles were obtained by precipitation when nonsolvents (water or aqueous surfactant solutions) were added to ethanol solutions of the drug. In addition, procedures were developed that made it possible to use the drug particles thus obtained as cores to be then coated with either silica or aluminum (hydrous) oxide layers. The presence of these inorganic shells was confirmed by electron microscopy, energy dispersive spectroscopy, and electrophoresis.     

Absorption of Polyelectrolytes on Colloidal Surfaces as Studied by Electrophoretic and Dynamic Light-Scattering Techniques

zeta-Potential and the effective diameter of the colloidal spheres absorbed with the macro-cations and macro-anions are studied by the electrophoretic light-scattering and dynamic light-scattering measurements. Colloidal spheres used are monodispersed polystyrene (220 nm in diameter) and colloidal silica spheres (110 nm). Macro-ions used are sodium polyacrylate, sodium polymethylacrylate, sodium poly(styrene sulfonate), and poly-4-vinyl pyridines quaternized with ethyl bromide, n-butyl bromide, benzyl chloride, and 5% hexadecyl bromide and 95% benzyl chloride. Reversal of colloidal surface charges from negative to positive occurs abruptly above the critical concentration of macro-ions by the excess absorption of the macro-cations onto the anionic colloidal spheres, i.e., avalanche-type absorption. The effective diameter of colloidal spheres including the absorbed layers increases substantially by four- to tenfold. In the presence of large amount of macro-cations aggregation of colloidal spheres mediated by the layers of absorbed macro-cations may occur. Absorption also occurs on the anionic colloidal spheres in the presence of an excess amount of macro-anions by the dipole-dipole-type attractive interactions. Copyright 1999 Academic Press.     

High-throughput transformation of colloidal polymer spheres to discs simply via magnetic stirring of their dispersions

In this article, we have successfully demonstrated the high-throughput production of colloidal discs via magnetic stirring of aqueous dispersions of monodisperse, sulfate-stabilized polystyrene (PS) spheres in the presence of a good organic solvent. The organic solvent could be water-miscible, such as tetrahydrofuran, or water-immiscible, such as chloroform. Water-immiscible organic solvents were mixed into aqueous dispersions of PS spheres in the presence of sodium dodecyl sulfate. The geometry of the resulting discs could be easily adjusted by the magnetic stirring time and speed, the stirring bar weight, and the amount of organic solvent. Our strategy is simple, scalable, and hardly dependent on the nature of the organic solvent and the PS sphere diameter; PS spheres with diameters ranging from 200 nm to 5 μm were deformed into discs with almost 100% yield. When organic solutions of fluorescent dyes and nanoparticles were used instead of pure organic solvents for PS sphere liquefaction, fluorescent discs were obtained, underlining the effective, efficient encapsulation of the fluorescent substance in the discs.     

均匀球形α-Fe2O3胶体粒子的形成机理

The formation of uniform spherical hematite particles, obtained by hydrolysis of ferric chloride at elevated temperatures, follows the mechanism of phase transformation from β-FeOOH to α-Fe_2O_3 and recrystallization from tiny α-Fe_2O_3 particles to spherical colliodal α-Fe_2O_3 uniform particles. A new viewpoint on the formation of uniform colloidal particles is suggested, that is, if uniform particles are to be formed by the mechanism of phase transformation-aggregation recrystallizationt, the secondary aggregations of tiny particles must be avoided after the first burst of aggregates. The relationship between initial time of reaching critical supersaturation with the aging temperature, pH and concentration of ferric chloride can be described by a three-parameter logarithmic linear equation.     

Effects of liquid bridge between colloidal spheres and evaporation temperature on fabrication of colloidal multilayers

For the application of colloidal crystal films as "photonic band gap" materials, their domain size and thickness are significant. The substrate withdrawing speed, the colloidal suspension volume fraction, and the colloidal suspension temperature have been studied for the domain size and thickness controls of colloidal crystals in this study. Stable dispersions of monodispersed polystyrene spheres with a diameter of 245 nm were synthesized according to a general emulsion polymerization for colloidal crystal films. By experimental results and the theoretical relationship between the number of layers and other parameters, we could know that the water bridge between colloidal spheres (which is formed by capillary force) influences the number of colloidal crystal layers significantly.     

Formation of uniform colloidal iron (III) oxides in ethylene glycol-water solutions

The aging of ferric chloride in ethylene glycol-water mixtures in the presence of chloride and phosphate ions has been carried out at 100 °C. The morphology and the structure of the resulting ferric (hydrous) oxide colloidal particles obtained under various conditions were evaluated by scanning and transmission electron microscopy and by X-ray diffraction analysis.Supported by the NSF Grant CHE 83-18196.Part of a M. S. thesis.     

Close-packed colloidal crystalline arrays composed of polystyrene latex coated with titania nanosheets

We have demonstrated that polystyrene latex coated with titania nanosheets can be fabricated into a close-packed colloidal crystalline array, and that these coated colloidal spheres can be used to control the peak position of optical stop bands through the coating. The titania-nanosheets-coated polystyrene latex was prepared by the layer-by-layer (LBL) assembly coating process, involving alternating lamination of cationic polyelectrolytes and anionic titania nanosheets on monodisperse polystyrene latex particles. The Bragg diffraction peak of the colloidal crystalline array shifted to longer wavelengths with the coating of titania nanosheets. This red shift was caused by an increase in refractive index upon coating, as revealed by angle-resolved reflection spectra measurements. The current work suggests new possibilities for the creation of advanced colloidal crystals having tunable optical properties from tailored colloidal spheres.     

Ferric Chloride Complexes in Aqueous Solution: An EXAFS Study

A series of concentrated aqueous solutions of ferric chloride with different chloride:iron(III) ratios has been studied by means of EXAFS to determine the structure around the iron(III) ion of the dominating species in such solutions. The dominating species in dilute acidic aqueous solution of ferric chloride, at less than 1 mmol·dm^?3, are the hydrated iron(III) and chloride ions, while in concentrated aqueous solution and in solutions with an excess of chloride ions, up to 1.0 mol·dm^?3, it is the trans-[FeCl₂(H₂O)₄]⁺ complex. Possible higher chloroferrate(III) or dimeric [Fe₂Cl₆] complexes at room temperature, as proposed in the literature, were not observed in any of the studied solutions in spite of an excess of chloride ions of 1 mol·dm^?3.     

Drying dissipative structures of colloidal crystals of silica spheres coated with polymer brushes of poly(carboxymethyl betaine)

Drying patterns of colloidal crystals of colloidal silica spheres coated with the brushes of zwitterionic poly(carboxymethyl betaine) (SiP-PCMB) and their parent silica spheres (SiP) were studied on a cover glass, a watch glass, and a Petri glass dish. Crystal structures kept the whole process of dryness of the suspensions of SiP-PCMB and SiP. Crystal structures of the dried films of SiP-PCMB were kept stable even when the initial suspensions contained 5 mM of sodium chloride, which is the important role of the excluded volume effects of the shells of the polymer brushes. On the other hand, crystal structures of SiP spheres in the dried films were much unstable and melted in the presence of 5 mM sodium chloride. In the suspension state, colloidal crystallization of SiP-PCMB took place stably by the contribution of the excluded volume effects besides the extended electrical double layers compared with that of SiP spheres, where only the double layer effect contributes to the crystallization. The fractal patterns of the complexation of SiP-PCMB or SiP spheres with sodium chloride were observed microscopically in the dried films. Several kinds of dissipative crystallization such as array and/or accumulation of the crystallites were observed, and the importance of the convectional and sedimentation processes during the course of dryness was demonstrated.     

磁性纳米包覆微球的制备和磁性表征

以胶体球形粒子为基体发展起来的纳米包覆(nano鄄coating)技术近来引起人们的极大兴趣,这种纳米包覆技术得到的产物常常被称为核壳粒子(core鄄shellparticles)。这种包覆一般是将纳米颗粒直接吸附在核微球上,或者包覆材料控制沉淀在核微球上[1,2]。这些复合微球常常展现出独特的光、电、力学、化学、催化等性质,因而具有广泛的研究和应用前景[3~7]。近十几年来,用做磁感应成像的超顺磁材料得到了深入的研究[4]。一方面,磁性颗粒的尺寸、电荷和表面成分对其应用有很大影响[8,9],另一方面,材料的磁学性质又主要取决于磁颗粒的大小[10]。Xu和Lindlar制备了含超顺磁颗粒的聚合物胶体颗粒,被用于构建超顺磁性的光子晶体[11,12]。在聚合物微粒上包覆氧化铁颗粒通常采用表面沉淀或表面改性官能团诱导反应包覆的方法。但这些方法不能很好控制复合微粒的均一性和表面平整性;Caruso的层鄄层包覆法(Layer鄄byLayer)虽然实现了磁性颗粒包覆[13],然而这种方法非常繁琐而不利于广泛应用。本文报道了一种新的合成磁性包覆颗粒的方法,即以聚合物微球为基核,通过非均相种子生长法包覆磁性纳米颗粒,并研究了...     

Electrosteric stability of styrene/acrylic acid copolymer latices under emulsion polymerization reaction conditions

Acrylic acid (AA) is used in many emulsion polymerization formulations to improve the colloidal stability during and after the production of latex products. Theoretically, the improved stability originates from electrostatic repulsion complemented with steric repulsion. The objective of this work was to study the contribution of AA to the colloidal stability of polystyrene and styrene/AA copolymer latices under simulated reaction conditions. The strength of electrostatic and steric repulsion forces as a function of the electrolyte concentration, pH, and temperature was investigated via coagulation experiments with monomer‐swollen latices in stirred tank reactors. Transmission electron microscopy pictures and dynamic light scattering measurements provided an understanding of the conditions and mechanisms leading to coagulation. The experiments demonstrated that the presence of surface‐bound carboxylic groups only improved the colloidal stability if the carboxylic groups were charged, that is, at a high pH. At a low pH, the copolymer latices were even less stable than the homopolymer latex, and this indicated that the addition of AA did not improve the colloidal stability of a growing polystyrene latex. With respect to emulsion polymerization process operations, insufficient mixing and a highly concentrated electrolyte feed were found to be sources of fouling and enhanced macroscopic coagulation. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 726–732, 2005     

Sedimentation and drying dissipative structures of colloidal silica (1.2 μm in diameter) suspensions in a glass dish and a polystyrene dish

Sedimentation and drying dissipative structural patterns formed in the course of drying colloidal silica spheres (1.2 μm in diameter) in aqueous suspension have been studied in a glass dish and a polystyrene dish. The broad ring patterns are formed within a short time in suspension state by the convection flow of water and colloidal spheres. The broad ring patterns are not formed when a dish is covered with a cap, which demonstrates the important role of the convectional flow of silica spheres and water accompanied with the evaporation of water on the air-suspension interface. The sedimentary spheres always move by the convectional flow of water, and the broad ring patterns became sharp with time. Broad ring and microscopic fine structures are formed in the solidification processes on the bases of the convectional and sedimentation patterns. Drying patterns of the colloidal suspensions containing sodium chloride are star-like ones, which strongly supports the synchronous cooperative interactions between the salt and colloidal spheres.     

Uniform particles of pure and silica-coated cholesterol

Uniform crystalline colloidal cholesterol particles of narrow size distribution were obtained by precipitation. The method consisted of adding a miscible non-solvent (water) into cholesterol solutions of different alcohols and acetone, without any additives. The properties of the resulting particles depended in a sensitive way on the concentration of all reactants, temperature, pH, ionic strength, and aging time. The major observed effects were due to the solubility of cholesterol, which was strongly affected by the solvent mixture and temperature. Precipitation in 1-propanol/water system yielded stable dispersions of well-defined particles, which were used to evaluate the effects of different experimental parameters on their properties. Aging of stable dispersions resulted in multi-layered aggregation of the primary platelets, the degree and rate of which process was strongly affected by temperature. Finally, it was shown that the colloidal cholesterol particles could be coated with homogeneous silica layers in order to alter their surface characteristics.     

Fabrication of binary colloidal crystals and non-close-packed structures by a sequential self-assembly method

Binary colloidal films of polystyrene (PS) spheres and silica spheres were fabricated with a sequential growth method using differently sized colloidal particles. In particular, we demonstrate the structures formed by a silica monolayer growing on top of a PS monolayer and a silica multilayer growing on top of a PS monolayer. By removal of the bottom PS layers, non-close-packed hexagonal, pentagonal, and square silica arrays were obtained at the original silica/PS interface. The possible formation mechanism of the non-close-packed structure was discussed, which may be used to explain how 3D colloidal crystals grow on patterned substrates.     

Nonionic latices in aqueous media

Nonionic latices in aqueous media prepared using methoxy polyethylene glycol methacrylate as a comonomer/stabiliser and ascorbic acid/hydrogen peroxide as the initiator have been examined for stability in the presence of the 21 electrolyte, barium chloride. These latices were found to be stable up to the concentrations of barium chloride examined, 0.75 mol dm^–3. Charge stabilised latices, on the other hand, were coagulated in 2.1×10^–2 mol dm^–3 barium chloride. The high stability of the nonionic latices was attributed to the grafting, during polymerisation, of methoxy polyethylene glycol chains to the surface of the core particle of polystyrene. The nonionic latices on concentration to high volume fraction gave highly ordered packing of the particles even in the presence of 0.1 mol dm^–3 sodium chloride.     

Precipitation and recrystallization of uniform CuCl particles formed by aggregation of nanosize precursors

Uniform, spherical CuCl particles were obtained by mixing aqueous solutions of CuCl ₂ and ascorbic acid in the presence of polyvinylpyrrolidone (PVP) as dispersing agent. The size and the uniformity of the resulting particles depended on the volume ratio of the reactant solutions, their concentrations, the distribution of the stabilizers, and the mixing method. The single jet precipitation yielded large spheres of broad size distributions, while the particles obtained by the double jet technique were rather uniform in size. The final colloidal CuCl particles were formed by the aggregation of nanocrystals, initially generated in the system. Depending on the pH of the reaction mixture, these particles slowly change to large CuCl crystals on aging in the mother liquor.     

金属Al薄膜基微池强制沉积胶体光子晶体的制备

强制沉积法是一种利用自组装原理快速沉积胶体晶体有序阵列的模板方法. 我们利用微机械刻划法加工金属Al薄膜, Al膜厚控制微粒粒径和聚醚砜膜厚控制层数, 成功地制备了用于强制沉积光子晶体的微池装置. 为了检验该微池装置的有效性, 我们分别测试了不同粒径(224, 245和283 nm)单分散聚苯乙烯微球的沉积效果, 并且对其中一种微球(283 nm)进行了不同温度的烘干处理, 检验了烘干温度对该样品表面形貌和光子带隙中心波长的影响. 实验结果表明, 该光子晶体呈面心立方结构, 内部晶格完整, 缺陷较少, 带隙中心波长的实验值与计算值符合得较好. 此外, 烘干处理可以使构成光子晶体的微球发生微观变化, 并导致光子带隙中心波长的蓝移.     

Effect of the Conditions the Reaction on the Formation of Iron Nanoparticles during the Reduction of Iron(III) Ions with Sodium Borohydride

Abstract—Iron nanoparticles are obtained by reducing iron(III) chloride with sodium borohydride in aqueous solutions at room temperature without using stabilizing agents. The obtained samples are characterized by X-ray diffraction analysis, low-temperature adsorption of argon, and transmission electron microscopy. The effect of the concentration of reagent solutions, the molar ratio of reagents, and exposure to ultrasound and inert atmosphere (Ar) on the size and composition of the resulting particles is found. Depending on the conditions of borohydride reduction of iron salts in an aqueous solution, both agglomerates of iron nanoparticles (5–50 nm) of 200 nm or larger and individual iron nanoparticles of 1 to 20 nm in size can be obtained. The presence and concentration of wustite and magnetite in the composition of the obtained particles mainly depend on the concentration of the reducing agent.     

Sedimentation and drying dissipative patterns of colloidal silica (560 nm in diameter) suspensions in a glass dish and a watch glass

The sedimentation and drying dissipative structural patterns formed during the course of drying colloidal silica spheres (CS550, 560 nm in diameter) in an aqueous suspension have been studied in a glass dish and a watch glass. Broad ring patterns were formed within 20 min in the suspension state by the convectional flow of the colloidal spheres and water. The sedimentary spheres always moved by the convectional flow of water, and the broad ring patterns became sharp with time. The sharpness of the broad rings was sensitive to the change in the room temperature and/or humidity. Colorful macroscopic structures were composed of the broad ring and wave-like patterns, and further colorful and beautiful microscopic fine patterns formed during the solidification processes based on the convectional and sedimentation structures. The drying patterns of the colloidal suspensions containing sodium chloride were different from the structures of CS550 or sodium chloride individuals, which support the synchronous cooperative interactions between the colloidal spheres and the salts.