Amine-amide equilibrium in gold(III) complexes and a gold(III)-gold(I) aurophilic bond

The ligands HN(CH2-2-C5H4N)2, BPMA, and PhCH2N(CH2-2-C5H4N)2, BBPMA, react with Na[AuCl4] to give the cationic complexes [AuCl(BPMA-H)]+ and [AuCl(BBPMA)]2+, respectively. The amido complex [AuCl(BPMA-H)]+ undergoes easy inversion at the amido nitrogen atom and can be reversibly protonated by triflic acid to give [AuCl(BPMA)]2+. The complex [AuCl(BBPMA)]2+ is easily decomposed in aqueous solution by cleavage of a carbon-nitrogen bond or, in dilute HCl solution, by protonation of the ligand to give [BBPMAH2]Cl[AuCl4] The complexes [BBPMAH2]Cl[AuCl4] and [BBPMAH2]Cl[AuCl2] can be formed by direct reaction of BBPMA with H[AuCl4]. Unusual forms of gold(III)...gold(III) and gold(III)...gold(I) aurophilic bonding are observed in the salts [AuCl(BPMA-H)][PF6] and [AuCl(BPMA-H)][AuCl2], respectively. The first comparison of the structures of gold(III) amine and amido complexes, in the cations [AuCl(BPMA-H)]+ and [AuCl(BPMA)]2+, indicates that there is little ppi-dpi bonding in the amido-gold bond and that the amide exerts a stronger trans influence than the amine group.     

Selenolate gold complexes with aurophilic Au(I)-Au(I) and Au(I)-Au(III) interactions

The gold(I) selenolate compound [Au(2)(SePh)(2)(mu-dppf)] (dppf = 1,1'-bis(diphenylphosphino)ferrocene) has been prepared by reaction of [Au(2)Cl(2)(mu-dppf)] with PhSeSiMe(3) in a molar ratio 1:2. This complex reacts with gold(I) or gold(III) derivatives to give polynuclear gold(I)-gold(I) or gold(I)-gold(III) complexes of the type [Au(4)(mu-SePh)(2)(PPh(3))(2)(mu-dppf)](OTf)(2), [Au(3)(C(6)F(5))(3)(mu-SePh)(2)(mu-dppf)], or [Au(4)(C(6)F(5))(6)(mu-SePh)(2)(mu-dppf)], with bridging selenolate ligands. The reaction of [Au(2)(SePh)(2)(mu-dppf)] with 1 equiv of AgOTf leads to the formation of the insoluble Ag(SePh) and the compound [Au(2)(mu-SePh)(mu-dppf)]OTf. The complexes [Au(4)(C(6)F(5))(6)(mu-SePh)(2)(mu-dppf)] and [Au(2)(mu-SePh)(mu-dppf)]OTf (two different solvates) have been characterized by X-ray diffraction studies and show the presence of weak gold(I)-gold(III) interactions in the former and intra- and intermolecular gold(I)-gold(I) inter-actions in the later.     

Unusual multi-step sequential Au(III)/Au(II) processes of gold(III) quinoxalinoporphyrins in acidic non-aqueous media

The electrochemistry of gold(III) mono- and bis-quinoxalinoporphyrins was examined in CH(2)Cl(2) or PhCN containing 0.1 M tetra-n-butylammonium perchlorate (TBAP) before and after the addition of trifluoroacetic acid to solution. The investigated porphyrins are represented as Au(PQ)PF(6) and Au(QPQ)PF(6), where P is the dianion of the 5,10,15,20-tetrakis(3,5-di-tert-butylphenyl)porphyrin and Q is a quinoxaline group fused to a β,β'-pyrrolic position of the porphyrin macrocycle; in Au(QPQ)PF(6) there is a linear arrangement where the quinoxalines are fused to pyrrolic positions that are opposite each other. The porphyrin without the fused quinoxaline groups, Au(P)PF(6), was also investigated under the same solution conditions. In the absence of acid, all three gold(III) porphyrins undergo a single reversible Au(III)/Au(II) process leading to the formation of a Au(II) porphyrin which can be further reduced at more negative potentials to give stepwise the Au(II) porphyrin π-anion radical and dianion, respectively. However, in the presence of acid, the initial Au(III)/Au(II) processes of Au(PQ)PF(6) and Au(QPQ)PF(6) are followed by an internal electron transfer and protonation to regenerate new Au(III) porphyrins assigned as Au(III)(PQH)(+) and Au(III)(QPQH)(+). Both protonated gold(III) quinoxalinoporphyrins then undergo a second Au(III)/Au(II) process at more negative potentials. The electrogenerated monoprotonated monoquinoxalinoporphyrin, Au(II)(PQH), is then further reduced to its π-anion radical and dianion forms, but this is not the case for the monoprotonated bis-quinoxalinoporphyrin, Au(II)(QPQH), which accepts a second proton and is rapidly converted to Au(III)(HQPQH)(+) before undergoing a third Au(III)/Au(II) process to produce Au(II)(HQPQH) as a final product. Thus, Au(P)PF(6) undergoes one metal-centered reduction while Au(PQ)PF(6) and Au(QPQ)PF(6) exhibit two and three Au(III)/Au(II) processes, respectively. These unusual multistep sequential Au(III)/Au(II) processes were monitored by thin-layer spectroelectrochemistry and a reduction/oxidation mechanism for Au(PQ)PF(6) and Au(QPQ)PF(6) in acidic media is proposed.     

Generation of gold thread from Au(III) and triethylamine

Gold threads were spontaneously generated at room temperature from a combined solution of aqueous HAuCl4 and triethylamine. Initially, some reduced gold nanoparticles were self-organized into one-dimensional (1D) nanowires, which then developed into three-dimensional (3D) microscale threads of gold. After aging, the self-organized gold thread grew spontaneously, accompanied by the generation of new buds to start new branches. TEM images show that the gold thread is composed of elastic materials; in which, colloidal gold nanoparticles reduced by triethylamine serve as the bricks, whereas elastic substances formed during the reaction serve as the mortar, which holds together the gold particles. The results of IR and 1H NMR spectroscopy demonstrate that the elastic materials consist mainly of alkane-like substances. Examination of the 1H NMR spectrum of triethylamine under the conditions of the reaction shows evidence of the occurrence of oxidative N dealkylation. The observed isotope effect demonstrates the existence of O-D cleavage resulting from the degradation of carbinolamine, which is the reported oxidation route of amines. Triethylamine acts here not only acts as a stabilizer and a reducing agent, but also as a precursor to build the alkane-like material upon which the gold thread is formed.     

Gold(I) and gold(III) corroles

Corrole complexes with gold(I) and gold(III) were synthesized and their structural, photophysical, and electrochemical properties investigated. This work includes the X-ray crystallography characterization of gold(I) and gold(III) complexes, both chelated by a corrole with fully brominated β-pyrrole carbon atoms. The mononuclear and chiral gold(I) corrole appears to be the first of its kind within the porphyrinoid family, while the most unique property of the gold(III) corrole is that it displays phosphorescence at ambient temperatures.     

Synthesis of luminescent gold(I) and gold(III) complexes with a triphosphine ligand

We have synthesized and characterized a series of trinuclear gold(I) complexes [(AuX)(3)(mu-triphos)] (triphos = bis(2-diphenylphosphinoethyl)phenylphosphine; X = Cl 1, Br 2, I 3, C(6)F(5) 4) and di- and trinuclear gold(III) complexes [[Au(C(6)F(5))(3)](n)(mu-triphos)] (n = 2 (5), 3 (6)). The crystal structure of 6 [[Au(C(6)F(5))(3)](3)(mu-triphos)] has been determined by X-ray diffraction studies, which show the triphosphine in a conformation resulting in very long gold-gold distances, probably associated with the steric requirements of the tris(pentafluorophenyl)gold(III) units. Complex 6 crystallizes in the triclinic space group P(-1) with a = 12.7746(16) A, b = 18.560(2) A, c = 21.750(3) A, alpha = 98.215(3) degrees, beta = 101.666(3) degrees, gamma = 96.640(3) degrees, and Z = 2. Chloride substitutions in complex 1 afford trinuclear gold(I) complexes [(AuX)(3)(mu-triphos)] (X = Fmes (1,3,5-tris(trifluoromethyl)phenyl) 7, p-SC(6)H(4)Me 8, SCN 9) and [Au(3)Cl(3)(-)(n)()(S(2)CNR(2))(n)(mu-triphos)] (R = Me, n = 3 (10), 2 (12), 1 (14); R = CH(2)Ph, n = 3 (11), 2 (13), 1 (15)). The luminescence properties of these complexes in the solid state have been studied; at low temperature most of them are luminescent, including the gold(III) derivative 6, with the intensity and the emission maxima being clearly influenced by the nature and the number of the ligands bonded to the gold centers.     

Synthesis and solution- and solid-state characterization of gold(I) rings with short Au...Au interactions. Spontaneous resolution of a gold(I) complex

We report the synthesis and solution- and solid-state characterization of gold(I) rings with short 1,9-transannular Au...Au interactions. The 9- and 16-membered gold(I) rings were prepared by reacting 9,9-dimethyl-4,5-bis(diphenylphosphino)-xanthene and (Me2S)AuCl in the presence of AgNO3 in the molar ratio of 1:0.5:1 and 1:1:1, respectively. X-ray crystallographic measurements in conjunction with solution X-ray diffraction and NMR methods have been used to determine the structure of gold(I) rings, and we also gained insight into the dynamics. The nine-membered gold(I) ring is chiral, and the crystal contains only one of the two enantiomers, either right- or left-handed. To the best of our knowledge this represents the first example of crystallization-induced spontaneous resolution of a binuclear gold(I) cycle. The 16-membered ring with 1,9-transannular Au...Au interaction is in a figure-eight conformation.     

Thermally triggered reductive elimination of bromine from Au(III) as a path to Au(I)-based coordination polymers

Four new [AuBr(2)(CN)(2)](-)-based coordination polymers, Zn(pyz)(NCMe)(2)[AuBr(2)(CN)(2)](2) (1; pyz = pyrazine), Co(pyz)[AuBr(2)(CN)(2)](2)·H(2)O (2) and [M(bipy)(2)(AuBr(2)(CN)(2))][(n)Bu(4)N][AuBr(2)(CN)(2)](2) (bipy = 4,4'-bipyridine), where M = Co (5) and Zn (6), were synthesized and three of them structurally characterized. 1 forms 1-D chains connected by pyz ligands while isostructural 5 and 6 form 3-D frameworks via [AuBr(2)(CN)(2)](-) and bipy linkers. Aqueous suspensions of 2, 5 and 6 or their precursors in situ (preferred) were heated hydrothermally to 125 °C, triggering the reductive elimination of bromine from the Au(III) centres, which yielded the [Au(CN)(2)](-)-based coordination polymers M(pyz)[Au(CN)(2)](2), where M = Zn (3) or Co (4) and Zn(bipy)[Au(CN)(2)][Au{Br(0.68)(CN)(0.32)}CN] (7), or a mixture of cyanoaurate(I)-containing products in the case of 5 and 6. The structural characterization of 3 revealed a [Au(CN)(2)](-)/pyz-based framework similar to previously reported Cu(pyz)[Au(CN)(2)](2), whereas 7 formed an intricate network consisting of individual 2-D networks held together by AuAu interactions and featuring the rare [AuBrCN](-) unit. The kinetics of the thermally-induced reductive elimination of Br(2) from K[AuBr(2)(CN)(2)] in 1-BuOH yielded a t(?) of approx. 10 min to 4 h from 98 to 68 °C, and activation parameters of ΔH(?) = 131(15) kJ mol(-1) and ΔS(?) = 14.97(4) kJ K(-1)mol(-1), indicating that the elimination of the halogen provides the highest barrier to activation.     

A new route to obtain shape-controlled gold nanoparticles from Au(III)-beta-diketonates

Ligands with a beta-diketone skeleton have been employed for the first time as reductant to produce ligand stabilized gold nanoparticles of different shapes from aqueous HAuCl(4) solution. Evolution of stable gold nanoparticles follows first order (k approximately equal to 10(-2) min(-1)) kinetics with respect to Au(0) concentration. Growth of particles of different shapes (spherical or triangular or hexagonal) goes hand in hand under the influence of different beta-diketones, which have excellent capping and reducing properties. Chlorine insertion was observed to take place in the beta-diketone skeleton.     

Au(I) and Au(III) complexes of a sterically bulky benzimidazole-derived N-heterocyclic carbene

The reaction of [AuCl(SMe₂)] with in situ generated [AgCl(ⁱPr₂-bimy)] (ⁱPr₂-bimy = 1,3-diisopropylbenzimidazolin-2-ylidene), which in turn was obtained by the reaction of Ag₂O with 1,3-diisopropylbenzimidazolium bromide (ⁱPr₂-bimyH⁺Br⁻, A), afforded the monocarbene Au(I) complex [AuCl(ⁱPr₂-bimy)] (1). Subsequent reaction of 1 and the ligand precursor ⁱPr₂-bimyH⁺BF₄⁻, (B) in acetone in the presence of K₂CO₃ yielded the bis(carbene) complex [Au(ⁱPr₂-bimy)₂]BF₄ (2) as a white powder in 80% yield. The oxidative addition of elemental iodine to complex 2 gave the bis(carbene) Au(III) complex trans-[AuI₂(ⁱPr₂-bimy)₂]BF₄ (3) as an orange-red powder in 92% yield. All complexes 1-3 have been fully characterized by multinuclear NMR spectroscopies, ESI mass spectrometry, elemental analysis, and X-ray single crystal diffraction. Complexes 1 and 2 adopt a linear geometry around metal centers as expected for d¹⁰ metals. The geometry around the Au(III) metal center in 3 is essentially square-planar with two carbene ligands in trans-position to each other. Complex 3 shows absorption and photoluminescence properties owing to a ligand to metal charge transfer.     

Spatially-directed oxidation of gold nanoparticles by Au(III)-CTAB complexes

Gold nanoparticles are readily oxidized by Au(III) in the presence of cetyl-trimethylammonium bromide (CTAB). Oxidation occurs preferentially at surface sites with higher curvature. Conversely, oxidation with cyanide ions in the absence of CTAB leads to uniform oxidation over the whole surface. Examples of the spatially directed oxidation are provided using large, irregular spheres, nanocubes, and nanorods. We conclude that the mechanism of oxidation depends on whether the oxidant is attached to CTAB micelles. It is postulated that the CTAB micelles approach the nanoparticles preferentially at the tips, leading to spatially directed oxidation.     

Computational Studies of Au(I) and Au(III) Anticancer MetalLodrugs: A Survey

Owing to the growing hardware capabilities and the enhancing efficacy of computational methodologies, computational chemistry approaches have constantly become more important in the development of novel anticancer metallodrugs. Besides traditional Pt-based drugs, inorganic and organometallic complexes of other transition metals are showing increasing potential in the treatment of cancer. Among them, Au(I)- and Au(III)-based compounds are promising candidates due to the strong affinity of Au(I) cations to cysteine and selenocysteine side chains of the protein residues and to Au(III) complexes being more labile and prone to the reduction to either Au(I) or Au(0) in the physiological milieu. A correct prediction of metal complexes’ properties and of their bonding interactions with potential ligands requires QM computations, usually at the ab initio or DFT level. However, MM, MD, and docking approaches can also give useful information on their binding site on large biomolecular targets, such as proteins or DNA, provided a careful parametrization of the metal force field is employed. In this review, we provide an overview of the recent computational studies of Au(I) and Au(III) antitumor compounds and of their interactions with biomolecular targets, such as sulfur- and selenium-containing enzymes, like glutathione reductases, glutathione peroxidase, glutathione-S-transferase, cysteine protease, thioredoxin reductase and poly (ADP-ribose) polymerase 1.     

Au2trien: a dinuclear gold(III) complex with unprecedented structura features

The X-ray structure of a dinuclear gold(III) complex, Au2trien, shows the presence of two square planar gold(III) centers bridged by a nitrogen donor, in a very unusual fashion.     

A family of alkynylgold(III) complexes [AuI(mu-{CH2}2PPh2)2Au(III)(C triple bond CR)2] (R = Ph, tBu, Me3Si): facile and reversible comproportionation of gold(I)/gold(III) to digold(II)

The symmetric digold(II)dichloride bis(ylide) complex [Au2Cl2(mu-{CH2}2PPh2)2] reacts with acetylides to form the asymmetric heterovalent gold(I)/gold(III) complexes [AuI(mu-{CH2}2PPh2)2AuIII(CCR)2] [R = Ph, tBu, and SiMe3], the phenyl analogue of which was characterized by X-ray crystallography. These compounds represent the first examples of gold(III) complexes containing two acetylide ligands. [AuI(mu-{CH2}2PPh2)2AuIII(CCPh)2] undergoes a reversible comproportionation reaction upon treatment with [Ag(ClO4)tht] to give the symmetric digold(II) cationic complex [Au2(tht)2(mu-{CH2}2PPh2)2](ClO4)2. If this complex is treated with phenylacetylene in the presence of base, the heterovalent gold(I)/gold(III) complex is re-formed. This reversible interconversion between binuclear gold(I)/gold(III) and digold(II) bis(ylide) complexes is unprecedented.     

Recovery of Au(III) ions by Au(III)-imprinted hydrogel

A new Au(III)-imprinted hydrogel (Au(III)-Imp) was prepared by the photopolymerisation of 4-acryloylmorpholine (AcM), 2-hydroxyethyl acrylate (HEA), and poly(ethylene glycol) diacrylate (cross-linking monomer, PEG-DA) in the presence of gold ions. In addition, non-imprinted hydrogel (N-Imp) was similarly prepared without Au(III) ions The Au(III)-Imp hydrogel was characterised by several techniques. To achieve the optimal conditions, effect of pH, time, and initial metal ion concentrations were investigated using a batch system. The pre-concentration factor for Au(III) ions was found to be at least 100. The analytical parameters of the method were determined and the method was also successfully applied to computer circuit board scrap samples. The reusability of the Au(III)-Imp hydrogel was also determined.     

The extraction of low-concentrations of gold(I) with 198Au as a radiotracer

The solvent extraction of gold from alkaline cyanide solution was studied by using ¹⁹⁸Au as a radiotracer. The influence of several variables on the gold extraction, including the concentration of gold, the molar ratio of extractants to gold(I), the volume percentage of cosolvent and the pH value of the aqueous phase, was investigated. The results indicated that the radioactive tracer technique is a quick, accurate, and convenient tool to investigate the extraction behavior of an element existing in low concentrations. The experimental results indicated that the studied amines, tetradecyldimethylbenzylammonium chloride, N1923 and tri-n-octylamine, could be used as extractants for the recovery of gold from aqueous alkaline cyanide solutions.     

某些Au(III)、Au(I)配离子在溶液中扩散的研究

用毛细管色谱在25℃测定了AuCl4、[Au(SO3)2]、[Au(CSN2H4)2]、[Au(CN)2]等配位体离子在HCl溶液中的扩散系数及AuCl4阴离子的扩散活化能, 并与文献中其它配阴离子的D值比较, 认为扩散离子的质量和所载电荷可能是决定配阴离子扩散系数的主要因素.