In situ IR reflectance absorption spectroscopy studies of the effect of Nafion on CO adsorption and electrooxidation at Pt nanoparticles

We have synthesized colloidal Pt nanoparticles with a mean particle size of 2.6±0.4 nm by reducing PtCl₂ dissolved in N,N-dimethylacetamide with t-BuMe₂SiH. The latter compound acted both as a reducing agent and a stabilizer of the Pt nanoparticles. Pt nanoparticles were deposited onto the Au substrate and IR reflectance absorption spectroscopy (IRRAS) was applied to investigate CO adsorption and oxidation at the surface of the catalyst. The reactivity of the catalyst covered with Nafion was compared with the reactivity of the catalyst without Nafion. In addition, the reactivity of the colloidal Pt was compared with the reactivity of bulk polycrystalline Pt. We found that CO oxidation proceeds at lower over-potentials at nanoparticles than at polycrystalline Pt. The IRRAS data indicate that the difference in the reactivity may be explained by a different mechanism of the oxidation reaction; Langmuir–Hinshelwood at Pt nanoparticles and island formation and growth at polycrystalline Pt. We have also observed that a film of Nafion slows down the CO oxidation reaction. The IRRAS spectra for CO adsorbed at Pt nanoparticles covered by Nafion were significantly different from the spectra recorded for the nanoparticles in the absence of Nafion. The spectroscopic features suggest that in the presence of Nafion the nanoparticles experience regions of lower and higher proton concentration.This paper is dedicated to Prof. G. Horanyi on the occasion of his 70th birthday and in recognition of his contribution to electrochemistry.     

In situ monitoring of the DNA hybridization by attenuated total reflection surface-enhanced infrared absorption spectroscopy

In situ monitoring of DNA hybridization kinetics is achieved via an attenuated total reflection surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS) technique using a sandwich assay structure. The synergistic enhancement effect gives this ATR-SEIRAS-based detection strategy promise to be a convenient and unique platform for bioanalysis.     

In situ monitoring of protein adsorption on a nanoparticulated gold film by attenuated total reflection surface-enhanced infrared absorption spectroscopy

In situ surface enhanced infrared absorption spectroscopy (SEIRAS) with an attenuated total reflection (ATR) configuration has been used to monitor the adsorption kinetics of bovine hemoglobin (BHb) on a Au nanoparticle (NP) film. The IR absorbance for BHb molecules on a gold nanoparticle film deposited on a Si hemispherical optical window is about 58 times higher than that on a bare Si optical window and the detection sensitivity has been improved by 3 orders of magnitude. From the IR signal as a function of adsorption time, the adsorption kinetics and thermodynamics can be explored in situ. It is found that both the electrostatic interaction and the coordination bonds between BHb residues and Au NP film surface affect the adsorption kinetics. The maximum adsorption can be obtained in solution pH 7.0 (close to the isoelectric point of the protein) due to the electrostatic interaction among proteins. In addition, the isotherm of BHb adsorption follows well the Freundlich adsorption model.     

In situ surface-enhanced infrared absorption spectroscopy for the analysis of the adsorption and desorption process of Au nanoparticles on the SiO2/Si surface

The adsorption and desorption of Au nanoparticles (AuNP) in colloidal D2O suspension on the (3-aminopropyl)triethoxysilane treated SiO2/Si surface was investigated by in situ attenuated total reflection surface enhanced infrared absorption (ATR-SEIRA) spectroscopy with a liquid flow cell. With increasing surface density of AuNP, the absorption of the vibrational modes of D2O and of the citrate molecules covering the AuNP increases due to SEIRA. Repulsive electrostatic Coulomb forces between the AuNP lead to the saturation of the AuNP surface density at submonolayer coverage. We show that the adsorption kinetics can be investigated by monitoring in situ the molecular vibrational modes of D2O and the citrate molecules. Furthermore, we clarify that the adsorption process can be described very well by a diffusion-limited first-order Langmuir kinetics model. When exposing a saturated AuNP submonolayer to 2-aminoethanethiol (AET)/D2O solution, the AuNP are removed from the surface and the IR absorption of the D2O vibrational modes become weaker again. Taking into account the time dependencies of the OD and the CH peaks, we propose a microscopic model where the AET molecules quickly adsorb on the AuNP by replacing most of the precovering citrate molecules exposed to the AET solution. As this takes place, the AuNP agglomerate-as we could detect with scanning electron microscopy-and are finally removed from the surface.     

In situ scanning FTIR microscopy and IR imaging of Pt electrode surface towards CO adsorption

In situ scanning FTIR microscopy was built up for the first time in the present work, which consists of an FTIR apparatus, an IR microscope, an X-Y mapping stage, and the specially designed electrochemical IR cell and computer software. It has been demonstrated that this new space-resolvd in situ IR technique can be used to study vibration properties of micro-area, and to perform IR imaging of electrode surface. The chemical image obtained using this technique fur CO adsorption on Pt electrode illustrated, at a space-resolution of 10~(-2) cm, the inhomogeneity and the distribution of reactivity of micro-area of electrode surface.     

In situ scanning FTIR microscopy and IR imaging of Pt electrode surface towards CO adsorption

In situ scanning FTIR microscopy was built up for the first time in the present work, which consists of an FTIR apparatus, an IR microscope, an X-Y mapping stage, and the specially designed electrochemical IR cell and computer software. It has been demonstrated that this new space-resolvdin situ IR technique can be used to study vibration properties of micro-area, and to perform IR imaging of electrode surface. The chemical image obtained using this technique for CO adsorption on Pt electrode illustrated, at a space-resolution of 10^-2 cm, the inhomogeneity and the distribu-tion of reactivity of micro-area of electrode surface. Project supported by the National Natural Science Foundation of China (Grant No. 29525307).     

Adsorption and oxidation of glycine on Au electrode: An in situ surface-enhanced infrared study

The adsorption and oxidation of glycine on Au surface are studied by cyclic voltammetry coupled with in situ surface-enhanced infrared spectroscopy. The infrared spectra definitely indicate that glycine is adsorbed on the electrode with two oxygen atoms directing the C_α–C bond perpendicular to the surface. During glycine oxidation, cyanide is formed and oxidized to cyanate at high potentials. It is also shown that ureylene biradical species (deprotpnated urea) bonded to the surface via two nitrogen atoms is formed on oxidized Au surface. Combining experimental results reported in the literature, the mechanism of glycine electrooxidation is discussed.     

In situ surface-enhanced Raman spectroscopic studies of nafion adsorption on Au and Pt electrodes

Understanding interactions between Nafion (perfluorosulfonic acid) and Pt catalysts is important for the development and deployment of proton exchange membrane fuel cells. However, study of such interactions is challenging and Nafion/Pt interfacial structure remains elusive. In this study, adsorption of Nafion ionomer on Au and Pt surfaces was investigated for the first time by in situ surface-enhanced Raman spectroscopy. The study is made possible by the use of uniform SiO(2)@Au core-shell particle arrays which provides very strong enhancement of Raman scattering. The high surface sensitivity offered by this approach yields insightful information on interfacial Nafion structure. Through spectral comparison of several model compounds, vibration assignments of SERS bands were made. The SER spectra suggest the direct interaction of sulfonate group with the metal surfaces, in accord with cyclic voltammetric results. Comparison of present SERS results with previous IR spectra was briefly made.     

In situ Ru K-edge X-ray absorption spectroscopy of a high-area ruthenium dioxide electrode in a Nafion-based supercapacitor environment

Changes in the state of charge of a high-area RuO_x electrode in an operating RuO_x|Nafion|IrO_x supercapacitor were monitored in situ by time-resolved, transmission Ru K-edge X-ray absorption spectroscopy (XAS). Linear and reversible variations in the intensity of the transmitted X-ray beam as a function of time were found by fixing the energy of the incident X-ray beam, E_i, at judiciously selected values within the Ru K-edge X-ray near edge structure (XANES), while the supercapacitor was charged and discharged at constant current. The sign of the slope of these temporal signals was found to vary, depending on the value of E_i. This behavior could be rationalized based on the spectral differences between the Ru K-edge XANES of RuO_x in the fully oxidized and fully reduced states, recorded in situ from films of the material electrodeposited on a gold substrate in the fluorescence mode.This paper is dedicated to Prof. Wolf Vielstich on the occasion of his 80th birthday for his outstanding contributions to electrochemistry     

A DFT study on the vibrational spectroscopy of protoporphyrin IX

Infrared and Raman spectra of protoporphyrin IX were recorded. DFT quantum chemical calculations were performed. Optimised molecular geometry, electric charge distribution, vibrational force constants were computed. The normal coordinate analysis and the scaling of the force constants yielded all the necessary data for the simulation of the infrared and Raman spectra and the potential energy distribution calculations. The result was the interpretation of all vibrational modes of the molecule. Conclusions were drawn from the difficulties arisen during the assignment of the vibrational spectra of such large molecules.     

Oriented attachment and membrane reconstitution of His-tagged cytochrome c oxidase to a gold electrode: in situ monitoring by surface-enhanced infrared absorption spectroscopy

A novel concept is introduced for the oriented incorporation of membrane proteins into solid supported lipid bilayers. Recombinant cytochrome c oxidase solubilized in detergent was immobilized on a chemically modified gold surface via the affinity of its histidine-tag to a nickel-chelating nitrilo-triacetic acid (NTA) surface. The oriented protein monolayer was reconstituted into the lipid environment by detergent substitution. The individual steps of the surface modification, including (1) chemical modification of the gold support, (2) adsorption of the protein, and (3) reconstitution of the lipid bilayer, were followed in situ by means of surface-enhanced infrared absorption spectroscopy (SEIRAS) and accompanied by normal-mode analysis. The high surface sensitivity of SEIRAS allows for the identification of each chemical reaction process within the monolayer at the molecular level. Finally, full functionality of the surface-tethered cytochrome c oxidase was demonstrated by cyclic voltammetry after binding of the natural electron donor cytochrome c.     

Electrochemical modification of surface morphology of Au/Ti bilayer films deposited on a Si prism for in situ surface-enhanced infrared absorption (SEIRA) spectroscopy

Surface-enhanced infrared absorption (SEIRA)-active Au/Ti bilayer films sputter deposited on Si substrates have been prepared by an electrochemical annealing (ECA) treatment for the first time. The application of Au/Ti bilayer films on Si substrates to the spectroscopic technique is a promising alternative to the conventional technique using directly deposited Au films on Si substrates, offering excellent adhesive durability of the deposited metal films. However, Au/Ti bilayer films have never been selected for the spectroscopy technique because the films in the as-prepared state exhibit relatively smooth surface morphology: the excitation of the localized surface plasmon is vital to achieving SEIRA enhancements but could hardly be observed on the smooth morphology. It is shown by ex situ scanning tunneling microscopy measurements that the unfavorable smooth morphology of the as-prepared Au/Ti bilayer films can be modified by the ECA treatment to a reasonably rough, island-structure morphology similar to that of the conventional SEIRA-active Au films. In situ infrared absorption spectroscopy of adsorbed sulfate anions has been conducted on the Au/Ti bilayer film both before and after ECA treatment. The spectroscopy measurements demonstrate that the SEIRA activity of the film after being subjected to the treatment is significantly improved so that the technique could detect adsorbates on the film electrodes even with the submonolayer coverage. As an additional benefit, the ECA treatment has brought about a substantial increase in the fraction of Au(111) domains on the polycrystalline Au film surfaces. Accordingly, this approach enables us to prepare SEIRA-active Au films having sufficient adhesion to the Si substrates as well as the highly preferred (111) orientation.     

Seeded-growth approach to fabrication of silver nanoparticle films on silicon for electrochemical ATR surface-enhanced IR absorption spectroscopy

Ag nanoparticle films (simplified as nanofilms hereafter) on Si for electrochemical ATR surface enhanced IR absorption spectroscopy (ATR-SEIRAS) have been successfully fabricated by using chemical deposition, which incorporates initial embedding of Ag seeds on the reflecting plane of an ATR Si prism and subsequent chemical plating of conductive and SEIRA-active Ag nanofilms. Two alternative methods for embedding initial Ag seeds have been developed: one is based on self-assembly of Ag colloids on an aminosilanized Si surface, whereas the other the reduction of Ag+ in a HF-containing solution. A modified silver-mirror reaction was employed for further growth of Ag seeds into Ag nanofilm electrodes with a theoretically average thickness of 40-50 nm. Both Ag seeds and as-deposited Ag nanofilms display island structure morphologies facilitating SEIRA, as revealed by AFM imaging. The cyclic voltammetric feature of the as-prepared Ag nanofilm electrodes is close to that of a polycrystalline bulk Ag electrode. With thiocyanate as a surface probe, enhancement factors of ca. 50-80 were estimated for the as-deposited Ag nanofilms as compared to a mechanically polished Ag electrode in the conventional IRAS after reasonable calibration of surface roughness factor, incident angles, surface coverage, and polarization states. As a preliminary example for extended application, the pyridine adsorption configuration at an as-deposited Ag electrode was re-examined by ATR-SEIRAS. The results revealed that pyridine molecules are bound via N end to the Ag electrode with its ring plane perpendicular or slightly tilted to the local surface without rotating its C2 axis about the surface normal, consistent with the conclusion drawn by SERS in the literature.     

Layer by layer characterization of 1-octadecanol films on a Au(111) electrode surface. "In situ" polarization modulation infrared reflection absorption spectroscopy and electrochemical studies

Bilayers of 1-octadecanol were transferred from the gas-solution interface onto a Au(111) electrode surface using either the horizontal touch or the Langmuir-Blodgett (LB) technique. The horizontal touch method gives an X-type film in which the molecule in the bottom layer is oriented with the tail toward the metal and the head toward the tail of the molecule in the top layer (head to tail orientation). The LB technique allows one to build not only X but also a Y bilayer, in which the molecules in the two leaflets are oriented tail to tail with the polar heads facing the metal and the solution. The properties of these films were characterized by electrochemistry and polarization modulation infrared reflection absorption spectroscopy (PM IRRAS). The freshly prepared X bilayer is defect free and is characterized by a low capacity of 0.84 microF cm(-2). The bilayer may be desorbed from the electrode surface at E < -0.6 V and readsorbed again at more positive potentials. The potential-driven readsorption gives a Y film with a higher capacity of 2.2 microF cm(-2). The IR studies of a mixed bilayer composed of one hydrogenated leaflet and a second deuterated leaflet showed that 1-octadecanol molecules assume a more vertical orientation in the leaflet facing the solution than in the leaflet in contact with the metal. Upon desorption of the X film, the molecules in the bottom layer flip-flop and the readsorbed film assumes the Y structure. Smaller tilt angles are observed in the X film as opposed to the Y film.     

In situ monitoring of Suzuki-Miyaura cross-coupling reaction by using surface-enhanced Raman spectroscopy on a bifunctional Au-Pd nanocoronal film

Surface-enhanced Raman spectroscopy (SERS), a powerful surface vibrational spectroscopic technique, is ideally suited for in situ monitoring the chemical transformations occurred at surfaces and/or interfaces. For in situ SERS monitoring, a platform integrated both plasmonic and catalytic activity is a prerequisite. Here, we fabricate a bifunctional Au-Pd nanocoronal film for in situ SERS monitoring Suzuki-Miyaura cross-coupling reaction. This excellent bifunctional substrate leads to the coupling of high catalytic activity with a strong SERS effect at the center of two adjacent Au cores and shows fine reproducibility and stability of SERS signals. During investigating the Suzuki reaction with in situ SERS, we found two distinct catalytic kinetic processes resulted from two disparate catalytic sites on a Au-Pd nanocoronal. Comparing with conventional analytical techniques, this work provides a novel approach for studying Suzuki reactions at surfaces and/or interfaces with in situ SERS.     

In situ X-ray absorption spectroscopy of Sn species adsorbed on platinized platinum electrode in perchloric acid solution containing stannous ions

Journal of Solid State Electrochemistry - In situ X-ray absorption spectroscopy (XAS) was applied to investigate the Sn adlayer on platinized (pl-) Pt electrode in deaerated 0.2 M HClO4 solution...     

In situ surface-enhanced Raman scattering and X-ray photoelectron spectroscopic investigation of coenzyme Q10 on silver electrode

In this study, coenzyme Q(10) (CoQ(10)) has been investigated by in situ near-infrared Fourier transform surface-enhanced Raman scattering (NIR-FT-SERS) spectroelectrochemistry and angle-resolved X-ray photoelectron spectroscopy (AR-XPS) on silver surface. The surface adsorption behavior of the coenzyme Q(10) radical intermediate could be monitored by potential-dependent SERS technique. At the applied potential lower than -0.30 V vs. SCE, the radical intermediate CoQ(10)H˙ stands perpendicularly on the silver surface with both oxygen atoms of the aromatic ring and isoprenoid side chains. When the applied potential is more positive than -0.30 V vs. SCE or at open circuit potential, the quinone ring (benzene ring) of reduced form of coenzyme Q(10) (CoQ(10)H(2)) adopts a face-on surface configuration on the surface. The responsible mechanism for the potential-dependent SERS spectra is presented. Moreover, the adsorption conformation of CoQ(10) has been further confirmed by AR-XPS at the silver surface.     

Reflection–absorption IR and surface-enhanced IR spectroscopy of tetracarboethoxy t-butyl-calix[4]arene,as a host molecule with potential applications in sensor devices

A vibrational study of the calix[4]arene derivative 25,26,27,28-tetracarboethoxy-p-tert-butylcalix[4]arene (TCEC) is accomplished in this work. This characterization implies a study of its adsorption on metal (Cu and Ag) films by reflection–absorption IR spectroscopy (RAIRS) and surface-enhanced IR (SEIR) in transmission and reflection–absorption configurations. Metal surfaces for SEIR were obtained by a simple direct immobilization on Ge of Ag nanoparticles suspended in water. The goal of this research was an accurate vibrational characterization of the above calixarene molecule, paying special attention in the structural marker bands of ester groups, which play an important role in the molecular adsorption on such metals. The information derived from this study will serve to better understand the interaction of ester-functionalised calixarenes with these metals, in order to prepare sensor films with selective affinity towards polycyclic aromatic hydrocarbons (PAHs). The application of these surface techniques confirmed the importance of the ester groups in the immobilization and self-assembly of these host molecules to the metal surface and provided information about the orientation adopted by TCEC on the metal.