Combined LIBD and XAFS investigation of the formation and structure of Zr(IV) colloids

The solubility of Zr(OH)4(am)--in other words hydrated Zr(IV) oxyhydroxide--is determined by means of coulometric titration (CT), and colloids are detected by laser-induced breakdown when the solubility limit is exceeded. Our results at pH 3-8 demonstrate that the solubility of Zr(OH)4(am) is several orders of magnitude higher than reported classical solubility data for acidic solutions, determined from undersaturation with a less soluble microcrystalline Zr(IV) oxide precipitate. Analysis of extended X-ray absorption fine structure (EXAFS) data shows that the microcrystalline colloids in a 0.1 mol l(-1) Zr aqueous solution at pH 0.2 contain tetrameric units, similar to those present in the structure of ZrOCl2.8H2O. Characterization of the CT solutions by means of EXAFS shows that oligomeric species form as the solubility limit is approached. The current lack of data on equilibrium constants for polynuclear hydroxide complexes prohibits the use of a realistic speciation model to describe the solubility of pH-dependent Zr(OH)4(am). However, the solubility curve is obtained using the mononuclear hydrolysis constants estimated in the present paper, along with the solubility constant (log K'sp=-49.9+/-0.5 in 0.5 mol l(-1) NaCl; log K degrees(sp)=-53.1+/-0.5 at I=0).     

Constrained geometry complexes of titanium (IV) and zirconium (IV) involving cyclopentadienyl fused to thiophene ring

Constrained geometry complexes (CGCs) of titanium (IV) and zirconium (IV) containing isomeric cyclopentadienyls fused to thiophene fragment, i.e., 4,5-dimethylcyclopenta[b]thienyl and 5,6-dimethylcyclopenta[b]thienyl, have been prepared and unambiguously characterized. The molecular structure of the titanium complex [η⁵-(5,6-dimethylcyclopenta[b]thienyl)SiMe₂(N^tBu)-η¹]TiCl₂ was established by X-ray crystal structure analysis. Preliminary studies showed that the studied CGCs/MAO are active olefin polymerization catalysts.     

Bis-ligated Ti and Zr complexes of chelating N-heterocyclic carbenes

In this communication we report the synthesis of novel titanium and zirconium complexes ligated by bidentate “salicylaldimine-like” N-heterocyclic carbenes (NHC). Double addition of the NHC chelate to either TiCl₄(thf)₂ or ZrCl₄ forms bis-ligated organometallic fragments with a distorted octahedral geometry. These complexes are rare examples of group IV transition-metal NHC adducts. Preliminary catalytic tests demonstrate that in the presence of methylaluminoxane (MAO) these complexes are useful initiators for the polymerization of ethylene and the copolymerization of ethylene with norbornene and 1-octene.     

General route for the synthesis of terminal phosphanylphosphido complexes of Zr(IV) and Hf(IV): Structural investigations of the first zirconium complex with a phosphanylphosphido ligand

Reactions of R₂P-P(SiMe₃)Li with [Cp₂MCl₂] (M = Zr, Hf) in hydrocarbons yield the related terminal phosphanylphosphido complexes [Cp₂M(Cl){(Me₃Si)P-PR₂-κP¹}] (R = ⁱPr and ^tBu). The solid state structures of [Cp₂M(Cl){P(SiMe₃)-PⁱPr₂-κP¹}] (M = Zr, Hf) were established by single crystal X-ray diffraction studies. The phosphido-P atoms adopt almost planar geometries and the phosphanyl P atoms adopt pyramidal geometries. The reaction of a mixture of (Me₃Si)₂PLi and Ph₂P-P(SiMe₃)Li with [CpZrCl₃] in toluene yields the dinuclear complex [Cp₂Zr₂Cl₅(Ph₂PPPSiMe₃)(Li THF DME)].     

Synthesis and characterization of Zr(IV) and Y(III) complexes with monocyclopentadienyl ligands containing an additional site tethered by a coordinating 2,6-pyridine bridge. X-ray crystal structures of the zirconium complexes

A new monocyclopentadienyl ligand containing an additional site tethered by a coordinating 2,6-pyridine unit has been prepared, rac-2-(1′-hydroxy-2′,2′-dimethylpropyl)-6-(1″,1″-dimethyl-cyclopentadienylmethyl) pyridine dilithium salt, LLi₂ (rac-4) that is analogous to the ligands present in CGC. After reacting the dilithium salt of the ligand with ZrCl₄ in a molar ratio of 1:1 in THF the complex LZrCl₂·THF (rac-5) was obtained which forms an insoluble oligomeric species after the loss of THF upon purification. From the mater liquor two crystalline species of the formula LHZrCl₃ (rac-6) and LH₂ZrCl₄·THF (rac-7) were isolated, whose X-ray crystal structures are reported. The reaction of LLi₂ with Y(OTf)₃ afforded the probably dimeric species [LYOTf]₂ (rac-8) from which the complex [LY(CH₂Si(CH₃)₃)]₂ (rac-9) was obtained after reaction with LiCH₂Si(CH₃)₃.     

Mandelazo I As A Reagent For Zr(IV) Determination

Abstract

A spectromeric study of the reaction of the Zr(IV) ions with Mandelazo I was carried out. Absorption spectra revealed that the maximum absorption of the zirconium compound appears at a wavelength (316 nm) different from the maxima of the reagent (253 and 390 nm). Beer-Lambert law is followed for zirconium concentrations of the order of 8.8x 10^?5 M (i.e. 8 μg Zr (IV)/mL). Possible interferences of ions such as Be(II), Cu(II), Zn(II), Al(III), Th(IV), U(VI), Mn(II), Fe(III), Co(II) and Ni(II) were investigated in connection with some masking agents such as SO₄ ^2- and C₂O₄ ^2-. Also, the solid state Zr(IV)-Mandelazo I compound was prepared and characterized by nitrogen and thermogravimetric analyses.     

A series of new zirconium complexes bearing bis(phenoxyketimine) ligands: Synthesis, characterization and ethylene polymerization

A series of new zirconium complexes bearing bis(phenoxyketimine) ligands, bis((3,5-di-tert-butyl-C₆H₂-2-O)R₁CN (2-R₂-C₆H₄))ZrCl₂ {R₁ = Me, R₂ = H (2a); R₁ = Et, R₂ = H (2b); R₁ = Ph, R₂ = H (2c); R₁ = 2-Me-Ph, R₂ = H (2d); R₁ = 2-F-Ph, R₂ = H (2e); R₁ = 2-Cl-Ph, R₂ = H (2f); R₁ = 2-Br-Ph, R₂ = H (2g); R₁ = Ph, R₂ = Me (2h); R₁ = Ph, R₂ = F (2i)}, have been prepared, characterized and tested as catalyst precursors for ethylene polymerization. Crystal structure analysis reveals that complex 2c has a six coordinate center in a distorted octahedral geometry with trans-O, cis-N, cis-Cl arrangement which possesses approximate C₂ symmetry. When activated with methylaluminoxane (MAO), complexes 2a-2i exhibited high ethylene polymerization activities of 10⁶-10⁸ g PE (mol M h)⁻¹. Compared with the bis(phenoxyimine) zirconium analogues bis((3,5-di-tert-butyl-C₆H₂-2-O)CHNC₆H₅)ZrCl₂ (3), the introduction of substituent on the carbon atom of the imine double bond enhanced the catalytic activity and molecular weight of prepared polyethylene. Especially, when the H atom at the carbon atom of the imine double bond was replaced by 2-fluoro-phenyl with strong electronic-withdrawing property, complex 2e displayed the highest catalytic activity, and the polyethylene obtained possessed the highest molecular weight and melt point.     

Phospha(III)guanidinate complexes of titanium(IV) and zirconium(IV) amides

Two procedures for the synthesis of group 4 phosphaguanidine compounds M(R₂PC{NR′}₂)(NR″₂)₃ (M = Ti, Zr; R = Ph, Cy; R′ = ⁱPr, Cy; R″ = Me, Et) are described. Spectroscopic characterization indicated symmetrical bonding of the phosphaguanidinate ligand in solution for the P-diphenyl derivatives whereas the P-dicyclohexyl analogs adopt a more rigid geometry with inequivalent N_amidine substituents within the phosphaguanidinate ligand. X-ray diffraction studies show exclusively monomeric tbp metal centers for a series of derivatives, with a chelating phosphaguanidinate ligand that spans an axial and an equatorial position. Two different conformers have been identified in the solid-state that differ in the relative orientation of the phosphorus R₂P–C substituents with respect to the equatorial plane of the tbp metal. The synthetic protocol was extended to the bimetallic complex, [PhP(C{NⁱPr}₂Ti{NMe₂}₃)CH₂–]₂, which was characterized by crystallography as the meso-form.     

Zr2N2Se: The First Zirconium(IV) Nitride Selenide by the Oxidation of Zirconium(III) Nitride with Selenium

The oxidation of zirconium(III) nitride (ZrN) with suitable amounts of selenium (Se) in the presence of sodium chloride (NaCl) as flux yields small yellow brownish platelets of the first zirconium(IV) nitride selenide with the composition Zr₂N₂Se. The new compound crystallizes in the hexagonal space group P6₃/mmc (no. 194) with a = 363.98(2) pm, c = 1316.41(9) pm (c/a = 3.617) and two formula units per unit cell. The crystallographically unique Zr⁴⁺ cations are surrounded by three selenide and four nitride anions in the shape of a capped trigonal antiprism. The Se^2– anions are coordinated by six Zr⁴⁺ cations as trigonal prism and the N^3– anions reside in tetrahedral surrounding of Zr⁴⁺ cations. These [NZr₄]¹³⁺ tetrahedra become interconnected via three edges each to form $\rm^{2}_{\infty}$ {[(NZr_4/4)₂]²⁺} double layers parallel to the (001) plane, which are held together by monolayers of Se^2– anions.     

In Situ Generation of Cationic Methylzirconium Complexes from rac-(EBI)Zr(NMe2)2 and NMR-Scale Polymerization of Propylene

ABSTRACT

Sequential NMR-scale reactions have been carried out in order to generate cationic methylzirconium complexes by the reaction of rac-(EBI)Zr(NMe₂)₂ (rac- 1 , EBI = Et(indenyl)₂) with methylaluminoxane (MAO) or various anionic compounds. By reacting 40 equiv. of MAO with rac- 1 in an NMR tube containing CD ₂CI₂ as a solvent at room temperature, rac- 1 is completely activated to give stable cationic methylzirconium complexes, [(EBI)ZrMe]⁺[MAO]^? which polymerize propylene to isotactic polypropylene (iPP). The formation of the cationic species is achieved after rac- 1 is methylated to form rac-(EBI)ZrMe₂ (rac- 2 ) by MAO and/or free Al₂Me₆ contained in MAO. The same sequential reaction has been performed by using rac(EBI)ZrCl₂ (rac- 3 ) for the comparison. MAO cannot generate the cationic species at the same reaction conditions in the reaction of rac- 3 and MAO, mainly due to the difficulties of methylation of rac- 3. Ansa ziconocene amide rac- 1 is stoichiometrically methylated by 2 equiv. of Al₂Me₆ to give rac- 2. Introduction of 1 equiv. of noncoordinating to the solution mixture of rac- 1 and 2 equiv. of Al₂Me₆ leads to the formation of stable cationic methylzirconium species, [rac-(EBI)Zr(μ-Me)₂AlMe₂]⁺. NMR-scale polymerizations have been carried out by adding a small amount of liquid propylene to these cationic species. The meso pentad values of iPP isolated in these polymerizations are in the range of 80.2–84.7%. By changing the order of sequential reaction, i.e., by reacting rac- 1 with noncoordinating anions prior to methylation by Al₂Me₆, the yield to give cationic methylzirconium species is decreased. Coordinative anions such as [HNMe₂Ph][BPh₄] and [HNBu₃][BP₄] are less effective for the generation of the active zirconium cations than noncoordinating anions. The amount of MAO needed to activate rac- 1 can be decreased by the pre-methylation of rac- 1 by Al₂Me₆.     

Unsymmetrical mononuclear and insoluble polynuclear oxo-vanadium(IV) Schiff-base complexes

Unsymmetrical and symmetrical mononuclear and insoluble polynuclear oxo-vanadium(IV) Schiff-base complexes were prepared and characterized. The complexes [VO(5-x-6-y-Sal)(5-x′-6-y′-Sal)en)] (where x, x′ = H, Br and y, y′ = H, OMe) were obtained in monomeric form while for x or x′ = NO₂ polymers were produced. In the case of [VO(5-x-6-y-Sal)(5-x′-6-y′-Sal)pn)] with a six-member N–N chelating ring, oxo-vanadium(IV) complexes were polynuclear. The tetradentate N₂O₂-Schiff-base ligands are coordinated in the equatorial plane of oxo-vanadium(IV). Electrochemical and spectroscopic data (UV–Vis and IR) suggest importance of coordination geometry and the substiuents on phenyl rings and the bridge group. Electron density of the vanadium center decreases by the electron-withdrawing groups on the ligand while electron density on vanadium increases via σ-donation of phenolic oxygen.     

Structures and reactivity of Zr(IV) chlorobenzene complexes

The synthesis, structures, and unusual reactivity of (C5R5)2ZrR'(ClPh)+ chlorobenzene complexes are described. The reaction of (C5R5)2ZrR'2 with [Ph3C][B(C6F5)4] in C6D5Cl affords [(C5R5)2ZrR'(ClC6D5)][B(C6F5)4] chlorobenzene complexes (1-d5, R' = CH2Ph and (C5R5)2 = (C5H5)2; 2a-d-d5, R' = Me and (C5R5)2 = rac-(1,2-ethylene(bis)indenyl) (2a), (C5H5)2 (2b), (C5H4Me)2 (2c), (C5Me5)2 (2d, C5Me5 = Cp*)). Complexes 1 and 2b,c are thermally robust but are converted to [{(C5R5)2Zr(mu-Cl)}2][B(C6F5)4]2 (4b,c) by a photochemical process in ClPh solution. In contrast, 2d undergoes facile thermal ortho-C-H activation to yield [Cp*2Zr(eta2-C,Cl-2-Cl-C6H4)][B(C6F5)4] (5), which slowly rearranges to [(eta4,eta1-C5Me5C6H4)Cp*ZrCl][B(C6F5)4] (6) via beta-Cl elimination and benzyne insertion into a Zr-CCp* bond. The higher thermal reactivity of 2d versus that of 1 and 2b,c is attributed to steric crowding associated with the Cp* ligands of 2d, which forces a ClPh ortho-hydrogen close to the Zr-Me group.     

Synthesis, structure and ethylene polymerization behavior of zirconium complexes with chelating ketoiminate ligands

Mixed ketoiminate/ketoimine/pentamethylcyclopentadienyl (Cp*) complex of zirconium, [(η⁵-Cp*){CH₃C(O)CHC(NHR)CH₃}{CH₃C(O)CHC(NR)CH₃}ZrCl₂] (R=4-CF₃Ph) (3) has been prepared in high yield by the reaction of one equivalent of 4-CF₃-phenyl-β-ketoimine (1a) and one equivalent of lithium 4-CF₃-phenyl-β-ketoiminate (2a) with one equivalent of Cp*ZrCl₃ in Et₂O. Bis(ketoiminate)zirconium dichloride complexes, 4 and 6, have been also prepared in high yield by the reaction of amine elimination of ketoimine ligands, respectively 1a and 1b, with Zr(NMe₂)₄ and followed by chlorination reaction with TMSCl. The X-ray crystallography reveals that the compound 3 is based on distorted octahedral geometry containing a ketoimine and a ketoiminate. The ketoiminate ligand coordinates to the zirconium as a bidentate ligand, leaving the metal center coordinatively unsaturated and thus leading to an additional binding of a ketoimine ligand to the metal to stabilize the complex 3. The zirconium complexes 3, 4 and 6 provide the moderate activity for the polymerization of ethylene in the presence of MMAO cocatalyst. Low molecular weight and high density polyethylene was obtained.     

Synthesis and structures of zirconium(IV) hydrogensulfato and carboxylato complexes with Kläui’s oxygen tripodal ligand

Interaction of [L_OEtZrF₃] ( = [Co(η⁵-C₅H₅){P(O)(OEt)₂}₃]⁻) (1) with 3 equivalents of bis(trimethylsilyl) sulfate afforded the Zr^IV hydrogensulfato complex [(L_OEt)₂Zr₂(SO₄)₂(HSO₄)₂] (2) that reacted with Et₃N to give [Et₃NH][L_OEtZr(H₂O)(SO₄)₂] (3). Treatment of complex 1 with 3 equivalents of trimethylsilyl acetate afforded [L_OEtZr(OCOCH₃)₃] (4), whereas that with 1 and 2 equivalents of trimethylsilyl trimethylsiloxyacetate yielded [L_OEtZrF(OCOCH₂O)]₂ (5) and [L_OEtZr(OCOCH₂OH)(OCOCH₂O)]₂ (6), respectively. The crystal structures of complexes 2 and 6 have been determined.     

Zirconium(IV) complexes ofSchiff bases

Zirconium(IV)Schiff base derivatives have been synthesised by reacting zirconium isopropoxide with monofunctional bidentateSchiff bases in different stoichiometric ratios. The resulting derivatives of the type Zr(O-Isopr)₃(SB) and Zr(O-Isopr)₂(SB)₂, whereSB ^– is the anion of the correspondingSchiff baseSBH, have been isolated in almost quantitative yields. Their molecular weights have been determined ebullioscopically and their ir spectra recorded.

---

Zirkonium(IV)-Komplexe von Schiff-Basen

Zusammenfassung Es wurden Zirkonium(IV)-Schiff-Basen-Derivate in verschiedenen stöchiometrischen Zusammensetzungen über die Reaktion von Zirkoniumisopropoxid mit monofunktionellen zweizähnigenSchiff-Basen synthetisiert. Die Komplexe vom Typ Zr(O-Isopr)₃(SB) und Zr(O-Isopr)₂(SB)₂ [SB ^– als Anion derSchiff-BaseSBH] wurden in fast quantitativer Ausbeute erhalten. Es werden Strukturen vorgeschlagen, die auf ebullioskopisch bestimmten Molekulargewichten und den IR-Spektren basieren.

     

Synthesis and characterization of semicarbazone metal complexes of Sn(IV) and Zr(IV)

Three semicarbazonyl ligands were synthesized and used to form six novel organometallic complexes with Ph2SnCl2 and Cp2ZrCl2. All these complexes were characterized by IR,1H NMR,MS and elemental analysis.     

Synthesis and catalytic application of monometallic molybdenum(IV) nitrile complexes

The novel molybdenum(IV) compound [MoO(NCMe)₅][B(C₆F₅)₄]₂ (1a) has been prepared by air oxidation of [Mo(CO)₃(NCMe)₃] in the presence of [H(OEt₂)₂][B(C₆F₅)₄] at room temperature. The [MoO(NCMe)₅]²⁺ cation shows a distorted octahedral configuration with two different acetonitrile-metal bond lengths due to a trans effect of the oxo-ligand. The trans-acetonitrile ligand is easily abstracted under oil pump vacuum to form [MoO(NCMe)₄][B(C₆F₅)₄]₂ (1b). The complex [MoO(NCPh)₄][B(C₆F₅)₄]₂ (2) is formed by substitution of acetonitrile ligands of 1a with benzonitrile molecules. The Mo(IV) complexes can be applied in the homopolymerization of isobutene at 30 °C leading to high yields and moderate molecular weights.     

Highly fluorous zirconocene(IV) complexes and their catalytic applications in the polymerization of ethylene

The catalytic activities of the highly fluorous systems formed by the zirconocene(IV) complexes [Zr{η⁵-C₅H₄SiMe₂C₂H₄R_F}₂Cl₂] (R_F = C₆F₁₃ (4a), C₁₀F₂₁ (4b)) or [Zr-{η⁵-C₅H₃(SiMe₂C₂H₄C₆F₁₃)₂}₂Cl₂] (5a) and MMAO in toluene have been studied and compared with analogous nonfluorous systems generated from [Zr{η⁵-C₅H₄SiMe₃}₂Cl₂] and [Zr{η⁵-C₅H₅}₂Cl₂]. Although less active than the reference systems, the fluorous catalysts are stable over prolonged polymerization times, giving rise to polymers with similar molecular weights to those obtained with [Zr{η⁵-C₅H₄SiMe₃}₂Cl₂].     

Synthesis, molecular structure, and polymerization reactivity of ethylenebis(1,3-dimethylcyclopentadienyl)zirconium dichloride

An ethylene-bridged zirconocene complex bearing methyl substituents only on the cyclopentadienyl carbons adjacent to bridge point, ethylenebis(1,3-dimethylcyclopentadienyl)zirconium dichloride (5) was synthesized. Crystal structure of 5 was determined. The complex, 5, when activated with MAO, shows better comonomer incorporation ability than [Ph₂C(Fluo)(Cp)]ZrCl₂ in the ethylene–norbornene copolymerization but it is not better than rac-Et(Ind)₂ZrCl₂ for the ethylene-1-hexene copolymerization in terms of activity and comonomer incorporation.     

Oxidative breakdown of polymeric plutonium(IV) hydroxide by cerium(IV)

The breakdown of polymeric plutonium(IV) hydroxide (plutonium colloid) by cerium(IV) has been studied spectrophotometrically by monitoring the formation of plutonium(VI). Reaction rate variations were studied with changes in cerium(IV), acid and plutonium colloid concentrations. A reaction mechanism involving the formation of [Ce₂O(OH)₂]⁴⁺ and its reaction with the polymer surface to produce two plutonium(V) ions is postulated to explain the observed kinetic data, in particular the maximum in the reaction rate at around 0.3 M nitric acid.