Intramolecular charge transfer at reverse micelle-water pool interface: p-N,N-dimethylaminobenzoic acid in AOT/cyclohexane/water reverse micelle

Photoinduced intramolecular charge transfer (ICT) of p-N,N-dimethylaminobenzoic acid (DMABOA) in AOT/cyclohexane/H2O reverse micelle was investigated and compared with that in CTAB/1-heptanol/H2O reverse micelle. It is proposed that the DMABOA molecule exists at the AOT reverse micelle water pool interface with its carboxylic group heading toward the water pool while the dimethylaminophenyl moiety buried in the micellar phase. Dual fluorescence of DMABOA that is indicative of the ICT reaction in the excited state was observed over the investigated water pool size, W of 3-17, in the AOT reverse micelle. The ICT emission of DMABOA in the AOT reverse micelle-water pool interface was found to be much weaker than that in the CTAB reverse micelle-water pool interface, and was attributed to the parallel direction of the electric field at the AOT reverse micelle-water pool interface to the charge transfer.     

Higher order structure of proteins solubilized in AOT reverse micelles

The higher order structure of proteins solubilized in an bis(2-ethylhexyl) sulfosuccinate sodium (AOT) reverse micellar system was investigated. From circular dichroic (CD) measurement, CD spectra of cytochrome c, which is solubilized at the interface of reverse micelles, markedly changed on going from buffer solution to the reverse micellar solution, and the ellipticity values in the far- and near-UV regions decreased with decreasing the water content (W₀: molar ratio of water to AOT), indicating that the secondary and tertiary structures of cytochrome c changed with the water content. The ellipticity of ribonuclease A, which is solubilized in the center of micellar water pool, in the near-UV region was dependent on W₀ and became minimum when W₀ of ca. 8 while the ellipticity in the far-UV region was almost constant, indicating that the tertiary structure of ribonuclease A was affected by the water content, but the secondary structure was conserved. The degree of curvature of the micellar interface appears to influence the protein structure because the reverse micelle size is linearly proportional to the W₀ value. As evidence of this, when the micelle size was comparable to the protein's dimensions, the structures were more affected by the water content. Judging from the dependence of the factor influencing the protein structure on the protein species, the location of solubilized protein in reverse micelles is significantly related to whether the protein structure in the system is affected by the micellar interface. In the cases of cytochrome c and lysozyme, the ellipticity against W₀ was dependent on the AOT concentration. In contrast, ribonuclease A gave very similar ellipticity values whatever the AOT concentration. In the n-hexane micellar system, cytochrome c exhibited lower ellipticity values and ribonuclease A in the lower W₀ range (W₀ < ca. 8) higher ellipticity values. These results indicated that the interaction between the protein and the micellar interface is a dominant factor influencing the protein structure in reverse micelles, and that it is governed by the location of solubilized proteins and the state of the micellar interface.     

Fourier transform infrared investigation on the state of water in reverse micelles of quaternary ammonium gemini surfactants C12-s-C(12).2Br in n-heptane

The state of water in the reverse micelles of C12-s-C(12).2Br homologues has been investigated by Fourier transform infrared spectroscopy. The results showed that the solubilized water had four states: the quaternary ammonium head-group-bound, the Br--bound, the bulklike, and the free water. With increasing W0, the number of bulklike water per surfactant (nb) rapidly increased, which indicated swelling of the reverse micelle. The number of the head-bound water per surfactant (nN+) gradually increased. This was attributed to a reduction of the interfacial curvature, which permitted more water molecules to associate with the ionic heads of surfactants and also led to a part of n-hexanol being expelled from the interface and thus water filled up. Owing to the existence of n-hexanol in the interface, the head-bound water of the present system was smaller than that of AOT system at the same W0. The number of counterion-bound water per surfactant (nBr-) remained unchanged with W0. This was due to much smaller dissociation of the head of C12-2-C(12).2Br than that of AOT. With increasing s, unchanged nN+ is attributed to the comprehensive effects of enlarged head, which promotes the hydration, increased ionization degree, and reduced size of the water pool. Owing to increased ionization degree, nBr- increases with s.     

Pyrene solubilization capacity in octaethylene glycol monododecyl ether (C12E8) micelles

We used fluorescence quenching, vibronic band ratios and excimer fluorescence techniques to quantify the statistics of pyrene solubilization in nonionic octaethylene glycol monododecyl ether (C₁₂E₈) micelles. Using a two-phase model (aqueous and micellar pseudophases) to interpret fluorescence results, we found that all three of these experimental methods provide consistent information about pyrene partitioning between aqueous and micellar pseudophases. From dynamic quenching experiments we determined the pyrene partition coefficient and the average number of pyrene molecules solubilized per micelle over a range of surfactant concentrations. The pyrene partition coefficient increases with increasing surfactant concentration. We confirmed the partitioning results by excimer fluorescence measurements. Quenching results indicate that pyrene is accessible to Cu²⁺ quenchers even in the limit of high surfactant concentration where solubilized pyrene is in the infinite dilution limit in the micellar pseudophase. This suggests that solubilized pyrene resides in the micellar palisade layer. We determined the maximum number of pyrene solubilizates allowed per micelle (micellar solubilization capacity) by applying a three-phase model to fluorescence experiments conducted in the presence of solid phase pyrene. The estimated maximum capacity is 6 pyrene molecules per micelle. The three phase partitioning model successfully predicted the excimer fluorescence in the presence of solid pyrene.     

Degree of micelle ionization and micellar growth for gemini surfactants detected by 6-methoxy-N-(3-sulfopropyl)quinolinium fluorescence quenching

The degree of micelle ionization of gemini surfactants has been investigated by using halide-sensitive fluorescence probes (e.g., 6-methoxy-N-(3-sulfopropyl)quinolinium (SPQ)). The fluorescence is quenched by the free bromide ions dissociated from surfactants. The degree of micelle ionization increased with increasing spacer chain length, but it decreased with increasing surfactant concentration. The Stern-Volmer plot gave two inflection points (i.e., not only at the cmc but also far above the cmc). The second inflection point suggested spherocylindrical micellar growth with decreases in the degree of micelle ionization. The spherocylindrical micellar growth was depressed with increasing spacer chain length, whereas it was enhanced with increasing tail chain length. The degree of micelle ionization of spherocylindrical micelles depended on the concentration and chain length of gemini surfactants. The change in SPQ fluorescence spectra upon hydrogenation was utilized to evaluate the solubilization site in micelle solutions. The dissolved SPQ in water was instantly reduced by the addition of NaBH4, resulting in abrupt changes in fluorescence intensity and spectral shift. All of the SPQ in micelle solution was also instantly reduced by NaBH4, indicating the existence of SPQ in the water bulk phase, but its fluorescence intensity increased upon the solubilization of hydrogenated SPQ into micelles.     

Excited state proton transfer in reverse micelles

The aqueous phase of water/AOT reversed micelles having varying diameters was probed by a single free diffusing proton that was released form a hydrophilic photoacid molecule (2-naphthol-6,8-disulfonate). The fluorescence decay signals were reconstructed through the geminate recombination algorithm, accounting for the reversible nature of the proton-transfer reactions at the surface of the excited molecule and at the water/detergent interface. The radial diffusion of the proton inside the aqueous phase was calculated accounting for both the entropy of dilution and the total electrostatic energy of the ion pair, consisting of the pair-energy and self-energy of the ions. The analysis implied that micellar surface must be modeled with atomic resolution, assuming that the sulfono residue protrudes above the water/hydrocarbon interface by approximately 2 A. The analysis of the fluorescence decay curves implies that the molecule is located in a solvent with physical-chemical properties very similar to bulk water, except for the dielectric constant. For reversed micelles with r(max) > or = 16 A, the dielectric constant of the aqueous phase was approximately 70 and for smaller micelles, where approximately 60% of the water molecule is in contact with the van der Waals surface of the micelle, it is as low as 60. This reduction is a reflection of the increased fraction of water molecule that is in close interaction with the micelle surface.     

Time-resolved EPR investigation on the photoreactions of vitamin K with antioxidant vitamins in micelle systems

The photochemical reactions of vitamin K (VK) with antioxidant vitamins (vitamin E (VE) and vitamin C (VC)) in aqueous hexadecyltrimethylammonium chloride (CTAC), sodium dodecyl sulfate (SDS), and Triton X-100 micelle systems, and in an aerosol OT (AOT) reversed micelle system were investigated by a time-resolved EPR (TR-EPR). The photolysis of VK with VE in the aqueous micelle solutions gave the TR-EPR spectra having strong intensity and net emissive polarization, suggesting that the excited triplet state of VK (³VK^*) was rapidly quenched by VE coexisting inside the micelle. On the other hand, the photolysis of VK with VC in the aqueous SDS and CTAC micelle systems gave the spectra having weak intensity, showing that the reaction between ³VK^* and VC was inefficient in these micelle systems, probably because ³VK^* scarcely diffused out from the micelle. The photolysis of VK with VC in the AOT reversed micelle solution gave the spin-correlated radical pair CIDEP spectrum. The result suggests that the long-lived radical pair was generated from the reaction between ³VK^* and VC in the water/oil interface region of the AOT micelle, although one of the reactants dissolved in the oil phase and another did in the separated water phase.     

Effects of the water content on the growth rate of AgCl nanoparticles in a reversed micelle system

The effects of water content on the growth rate and the final particle size of AgCl nanoparticles in a reversed micelle (RM) system of polyoxyethylene (6) nonylphenyl ether (NP-6)/water/cyclohexane were investigated using a double-jet technique, in which RM solutions of AgNO(3) and KCl were added concurrently to a RM solution containing the excess concentration of chloride ion. As a result, the particle growth rate and the final particle size at a constant Rw ( identical with[water]/[surfactant]) below 5 were found to be in excellent agreement with our theoretical prediction based on a dynamic Ostwald ripening mechanism governed by the overall solubility of the solid and the diffusivity of the reversed micelles, whereas the final particle size was far beyond the size of the water pool of a reversed micelle. Thus, the dramatic reduction of the particle size in the RM system can be explained by the drastic reduction of the overall solubility of the solid and the small diffusivity of the bulky reversed micelles as a carrier of silver ion, and not by the size of the water pool of a reversed micelle as conventionally explained. Some additional contribution of a coagulation process was also suggested in a high Rw range above 5. Significant coagulation of AgCl particles was observed in a RM system with AOT in place of NP-6 even under the standard conditions for the NP-6 system.     

Fluorescence Dynamics of Coumarin C522 as a Function of Micelle Confinement along with Cyclodextrin Supramolecular Complex Formation

Our aim is to doubly confine a molecule of coumarin C522 in a host–guest supramolecular complex with β‐cyclodextrin in a reverse sodium dioctyl sulfosuccinate (AOT) micelle using nonpolar n‐heptane and polar water solvents. Varying the volumes of coumarin C522 and β‐cyclodextrin dissolved in water allows us to control the water‐pool diameters of the reverse micelle in n‐heptane with values of w=3, 5, 10, 20, and 40, where w is the ratio of water concentration to AOT concentration in n‐heptane. To study the fluorescence dynamics of coumarin C522, the spectral steady‐state and time‐resolved dependences are compared for the two systems coumarin C522(water)/AOT(n‐heptane), denoted C522/micelle, and coumarin C522/β‐cyclodextrin(water)/AOT(n‐heptane), referred to as C522/CD/micelle. The formation of the supramolecular host–guest complex CD–C522 is indicated by a blue shift, but in the micelle, the shift is red. However, the values of the fluorescence maxima at 520 and 515 nm are still way below the value of 535 nm representing bulk water. The interpretation of the red shift is based on two complementary processes. The first one is the confinement of CD and C522 by the micelle water pool and the second is the perturbation of the micelle by CD and C522, resulting in an increase of the water polarity. The fluorescence spectra of the C522/micelle and C522/CD/micelle systems have maxima and shoulders. The shoulder intensities at 440 nm, representing the C522 at n‐heptane/AOT interface, decrease as the w values decrease. This intensity shift suggests that the small micelle provides a stronger confinement, and the presence of CD shifts the equilibrium from n‐heptane towards the water pool even more. The fluorescence emission maxima of the C522/micelle and C522/CD/micelle systems for all w values clearly differentiate two trends for w=3–5, and w=10–40, suggesting different interaction in the small and large micelles. Moreover, these fluorescence maxima result in 7 and 13 nm differences for w=3 and w=5, respectively, and provide the spectral evidence to differentiate the C522 confinement in the C522/micelle and C522/CD/micelle systems as an effect of the CD molecule, which might be interpreted as a double confinement of C522 in CD within the micelle. The ultrafast decay in the case of w=3 ranges from 9.5 to 16 ps, with an average of 12.6 ps, in the case of the C522/micelle system. For C522/CD/micelle, the ultrafast decay at w=3 ranges from 9 to 14.5 ps, with an average of 11.8 ps. Increasing w values (from 10 to 40) result in a decrease of the ultrafast decay values in both cases to an average value of about 6.5 ps. The ultrafast decays of 12.6 and 11.8 ps for C522/micelle and C522/CD/micelle, respectively, are in the agreement with the observed red shift, supporting a double confinement in the C522/CD/micelle(w=3) system. The dynamics in the small and large micelles clearly show two different trends. Two slopes in the data are observed for w values of 3–5 and 10–40 in the steady‐state and time‐resolved data. The average ultrafast lifetimes are determined to be 12.6 and 6.5 ps for the small (w=3) and the large (w=40) micelles, respectively. To interpret the experimental solvation dynamics, a simplified model is proposed, and although the model involves a number of parameters, it satisfactory fits the dynamics and provides the gradient of permittivity in the ideal micelle for free water located in the centre (60–80) and for bound water (25–60). An attempt to map the fluorescence dynamics of the doubly confined C522/CD/micelle system is presented for the first time.     

2-(Acylaminoethyl)trimethylammonium chloride surfactants: synthesis and properties of aqueous solutions

The title cationic surfactants have been synthesized by reaction of carboxylic acids with N, N-dimethylethylenediamine to give an intermediate amidoamine. The latter was quaternized with methyl iodide; the product was transformed into the corresponding chloride surfactant by ion-exchange on a macroporous resin. Adsorption and aggregation of these surfactants in H ₂O have been studied by surface tension measurement. Additionally, solution conductivity, electromotive force (H ₂O), and Fourier transform IR spectroscopy (D ₂O) have been employed to investigate micelle formation. Increasing the length of R resulted in the following changes: an increase in the micelle aggregation number; a decrease in the minimum area per surfactant at the solution/air interface, the critical micelle concentration, and the degree of counterion dissociation. Gibbs free energies of adsorption at the solution/air interface and micelle formation in water were calculated and compared to those of alkyltrimethylammonium chlorides. The contribution to these free energies from surfactant methylene groups (in the hydrophobic tail) and the head group was calculated. The former are similar to those of other cationic surfactants. The corresponding free-energy contributions of head groups are smaller (i.e., more negative), indicating that the transfer of this group from bulk water to the interface (for adsorption) and/or to the micelle (aggregate formation) is more favorable. This is attributed to intermolecular hydrogen bonding of monomers at the interface, and/or in the aggregate, via the amide group, in agreement with our Fourier transform IR data. Our results are compatible with a micellar interface closer to the amide nitrogen than to the quaternary ammonium ion.     

Activity and Conformation of Yeast Alcohol Dehydrogenase (YADH) Entrapped in Reverse Micelles

Yeast alcohol dehydrogenase (YADH) solubilized in reverse micelles of aerosol OT (i.e., AOT or sodium bis (2-ethyl hexyl) sulfosuccinate) in isooctane has been shown to be catalytically more active than that in aqueous buffer under optimum conditions of pH, temperature, and water content in reverse micelles. Studies of the secondary structure conformational changes of the enzyme in reverse micelles have been made from circular dichroism spectroscopy. It has been seen that the conformation of YADH in reverse micelles is extremely sensitive to pH, temperature, and water content. A comparison has been made between the catalytic activity of the enzyme and the α-helix content in the conformation and it has been observed that the enzyme is most active at the maximum α-helix content. While the β-sheet content in the conformation of the entrapped enzyme was found to be dependent on the enzyme–micelle interface interaction, the α-helix and random coil conformations are governed by the degree of entrapment and the extent of rigidity provided by the micelle core to the enzyme structure.     

Effect of temperature and surfactant structure on the microviscosity at the micelle-water interface: isomeric alkylbenzenesulfonates used as their own probe

We investigated the effect of temperature and surfactant structure on the microviscosity in aqueous micellar solutions formed by isomeric hexadecylbenzenesulfonates (xphiC16, where x=4-6 and indicates the position of the benzene ring [phi] along the alkyl chain) by fluorescence polarization and excimer emission spectroscopy. For a given isomer, the degree of polarization (p) was found to decrease with increasing temperature, with no evidence for changes in micellar structure. etaint/tau ratios, where etaint is the microviscosity of the benzene environment in micelles and tau its natural lifetime, were derived from fluorescence polarization measurements and showed a similar temperature behavior to that observed with the degree of polarization, suggesting that a thermal effect is the determinant factor in the variation of etaint. Interestingly, the microviscosity around the benzene ring was found to depend on the isomer structure in the entire range of temperatures investigated (8-60 degrees C) and is mainly determined by the orientation of the surfactant at the micelle-water interface in which the short alkyl chain is preferentially located at the interface and the long alkyl chain in the micellar core. This micelle conformation was found to prevail in the entire range of temperatures. In contrast to the dependence of p with temperature, excimer to monomer maximum emission ratios (IE/IM) were found to increase with increasing temperature, showing that when IE/IM is high (strong excimer emission), the degree of polarization is low (low microviscosity) and vice versa. Thus, the two independent measurements (IE/IM and p) yield the same information, namely, that the benzene moiety in all xphiC16 aqueous micelles resists both translational and rotational diffusion in a similar manner in the entire range of temperatures investigated (approximately 8-60 degrees C).     

Structure and aggregation number of a lyotropic liquid crystal: a fluorescence quenching and molecular dynamics study

The structure and aggregation number of a discotic lyotropic liquid crystal, prepared from tetradecyltrimethylammonium chloride (TDTMACl)/decanol (DeOH)/NaCl/H2O, have been examined using fluorescence quenching of pyrene by hexadecylpyridinium chloride and molecular dynamics (MD). The fluorescence method gives an aggregation number of 258 +/- 25 units (DeOH + TDTMACl). From the MD simulation, a lower limit for the aggregate dimension of 130 units of DeOH + TDTMACl is predicted. A stable oblate aggregate of 240 units was studied in detail. A strong polarization between the ammonium headgroups and chloride ions is observed from the calculated trajectory. DeOH headgroups are located, on average, 0.3 nm more to the interior of the aggregate than the TDTMACl headgroup and contribute to widening the interface by forming H-bonds with water. The radial distribution function of the ammonium headgroup shows that there are 16 water molecules in the first solvation sphere. The diagonal elements of the order parameter tensor of the tail atoms of both surfactants indicate that the interior of the micelle preserves about the same degree of order as at the interface, up to the last three atoms of the aliphatic chain, where the order starts to decrease.     

Exciplex-type behavior and partition of 3-substituted indole derivatives in reverse micelles made with benzylhexadecyldimethylammonium chloride, water and benzene

The fluorescence properties of 3-methylindole (MI), 3-indoleacetic acid (IAA), 3-indoleethyltrimethylammonium bromide (IETA), L-tryptophan (Trp) and tryptamine hydrochloride (TA) were studied in reverse micelles solutions made with the cationic surfactant benzylhexadecyldimethylammonium chloride (BHDC) in benzene as a function of the molar ratio water/surfactant R (= [H2O]/[BHDC]). The fluorescence quenching of the model compound MI by benzene in cyclohexane solutions and by BHDC in benzene solutions were also studied in detail. The fluorescence of MI in benzene is characteristic of a charge-transfer exciplex. The exciplex is quenched by the presence of BHDC, due to the interactions of the surfactant ion pairs with the polar exciplex. In reverse micelle solutions at low R values, all the indoles show exciplex-type fluorescence. As R increases, the fluorescence behavior strongly depends on the nature of the indole derivative. The anionic IAA remains anchored to the cationic interface and its fluorescence is quenched upon water addition due to the increases of interface's micropolarity. For IETA, TA and Trp an initial fluorescence quenching is observed at increasing R, but a fluorescence recovery is observed at R > 5, indicating a probe partition between the micellar interface and the water pool. For the neutral MI, the fluorescence changes with R indicate the partition of the probe between the micellar interface and the bulk benzene pseudophase. A simple two-site model is proposed for the calculation of the partition constants K as a function of R. In all cases, the calculation showed that even at the highest R value, about 90% of the indole molecules remain associated at the micellar interface.     

疏水化修饰的聚N-异丙基丙烯酰胺高分子的水溶液性质研究

为了研究不同疏水化修饰的聚Ｎ 异丙基丙烯酰胺（ＰＮＩＰＡＭ）高分子的水溶液性质,合成了一系列Ｎ 异丙基丙烯酰胺（ＮＩＰＡＭ）和长链丙烯酸酯及丙烯酸胆固醇酯的共聚物．利用表面张力法证实了该类共聚物在室温下都具有良好的表面活性,在水溶液中能够形成胶束．利用荧光探针法,研究了共聚物的低温临界溶液温度（ＬｏｗｅｒＣｒｉｔｉｃａｌＳｏｌｕｔｉｏｎＴｅｍｐｅｒａｔｕｒｅ,ＬＣＳＴ）,发现,随着丙烯酸酯碳链及其配比（摩尔投料比）的变化,共聚物的ＬＣＳＴ变化不明显,但它们都比均聚的ＰＮＩＰＡＭ要低;利用荧光偏振法研究了共聚物在水溶液中的微粘度,发现其微粘度不随共聚物中丙烯酸酯链长和配比的变化而变化,说明了该类共聚物在室温下能够形成相类同的胶束内核．     

Physicochemical characterization of phospholipid solubilized mixed micelles and a hydrodynamic model of interfacial fluorescence quenching

Mixed micelles of solubilized dimyristoyl phosphatidylcholine (DMPC) and the zwitterionic detergent dodecyldimethylammoniopropane sulfonate are characterized employing time-resolved fluorescence quenching (TRFQ), electron spin resonance (ESR), and surface tensiometry toward the goal of investigating interfacial reactions using these micelles as host reaction media. The properties measured are the micelle aggregation numbers, interfacial hydration index, microviscosity, and the critical micelle concentrations for various molar fractions, XDMPC, of DMPC, 0相似文献   

Online kinetic studies on intermediates of laccase-catalyzed reaction in reversed micelle

Using water/AOT/n-octane reversed micelle as the medium, the optical signal of the reactive intermediate of laccase-catalyzed oxidation of o-phenylenediamine, which was indetectable in aqueous solutions, was successfully captured. Thus online kinetic studies of the intermediate were accomplished. Two-way kinetic spectral data were acquired with stopped-flow technique. By resolving the data with global analysis software, both the kinetic curves and the absorption spectra of the components involved in the reaction process were simultaneously obtained. The whole reaction in the reversed micelle was proved to be composed of two successive steps, an enzymatic generation of the intermediate and a following nonenzymatic decay of the intermediate. A consecutive first-order kinetic model of the whole reaction was confirmed. The influences of microenvironmental factors of the medium (such as the pH value of the water pool and the water/AOT ratio) on the detection of the intermediate were also investigated.     

Ultrafast dynamics of a solution in spatially restricted environments studied by photothermal spectroscopies

The ultrafast dynamics of a solution in spatially restricted environments was studied by using the ultrafast transient lens (UTL) method. The UTL method is used to monitor the molecular dynamics of a solution by means of a change in the refractive index, which is advantageous for investigating the molecular dynamics of restricted systems. We investigated the photoisomerization of azobenzene derivatives in cyclodextrin nanocavities and revealed how the confinement affects the photoisomerization dynamics and yields. We also studied the relaxation dynamics of photo-excited auramine O (AuO) in a water/aerosol-OT/n-heptane reversed micelle. Both the perturbed properties of the included water and the interactions between AuO and the interface of the reversed micelle strongly appeared to affect the relaxation dynamics. At the same time, we observed a change in the refractive index suggesting a structural change of the micelles in the picosecond region that could not be detected by transient absorption spectroscopy. In addition, we developed the total internal reflection UTL (TIR-UTL) method to monitor the ultrafast molecular dynamics at the liquid interface. The relaxation dynamics of photoexcited AuO at the silica/water interface were observed with subpicosecond time resolution, and it was revealed that the interaction with the interface strongly inhibited the relaxation process. These results demonstrated the advantages of the UTL method for investigating the molecular dynamics of a solution in spatially restricted environments.     

超支化聚乙烯亚胺-聚天冬氨酸苄酯共聚物的制备及性能

以超支化聚合物聚乙烯亚胺为引发剂, 天冬氨酸苄酯-NCA为单体, 利用热开环聚合法合成了超支化聚乙烯亚胺-聚天冬氨酸苄酯共聚物(PEI-PBLA). 用核磁共振波谱对PEI-PBLA的化学结构进行了表征. 研究了PEI-PBLA在水溶液及有机溶液中的自组装行为. 以芘为荧光探针测定了共聚物在水中形成胶束的临界胶束浓度. 以甲基橙为客体分子, 研究了共聚物胶束的包覆能力, 结果表明, 共聚物对客体分子的吸附与溶液的pH值有关. 研究了共聚物与质粒DNA的复合发现, PEI-PBLA能够很好地与质粒DNA复合, 并且可以避免DNA酶的降解, 对其起到一定的保护作用. 此聚合物在药物传输、可控释放及基因载体等方面都有着潜在的应用价值.     

Micellization of non-surface-active diblock copolymers in water. Special characteristics of poly(styrene)-block-poly(styrenesulfonate)

Strongly ionized amphiphilic diblock copolymers of poly(styrene)-b-poly(styrenesulfonate) with various hydrophilic and hydrophobic chain lengths were synthesized by living radical polymerization, and their properties and self-assembling behavior were systematically investigated by surface tension measurement, foam formation, hydrophobic dye solubilization, X-ray reflectivity, dynamic light scattering, small-angle neutron scattering, small-angle X-ray scattering, and atomic force microscope techniques. These copolymer solutions in pure water did not show a decrease of surface tension with increasing polymer concentration. The solutions also did not show foam formation, and no adsorption at the air/water interface was confirmed by reflectivity experiments. However, in 0.5 M NaCl aq solutions polymer adsorption and foam formation were observed. The critical micelle concentration (cmc) was observed by the dye solubilization experiment in both the solutions with and without added salt, and by dynamic light scattering we confirmed the existence of polymer micelles in solution, even though there was no adsorption of polymer molecules at the water surface in the solution without salt. By the small-angle scattering technique, we confirmed that the micelles have a well-defined core-shell structure and their sizes were 100-150 A depending on the hydrophobic and hydrophilic chain length ratio. The micelle size and shape were unaffected by addition of up to 0.5 M salt. The absence of polymer adsorption at the water surface with micelle formation in a bulk solution, which is now known as a universal characteristic for strongly ionized amphiphilic block copolymers, was attributed to the image charge effect at the air/water interface due to the many charges on the hydrophilic segment.