Torsional wave dispersion in a finitely pre-strained hollow sandwich circular cylinder

This paper studies torsional wave dispersion in a three-layered (sandwich) hollow cylinder with finite initial strains. The investigations are carried out within the scope of the piecewise homogeneous body model with the use of the three-dimensional linearized theory of elastic waves in initially stressed bodies. The mechanical relations of the materials of the cylinders are described through their harmonic potential. The analytical expression is obtained for the low wavenumber limit values of the torsional wave propagation velocity. The numerical results on the influence of the initial stretching or compression of the cylinders along the torsional wave propagation direction are presented and discussed.     

Linear and nonlinear magnetohydrodynamic waves in twisted magnetic flux tubes

Dynamics of axisymmetric Alfvén and slow magnetoacoustic waves in weakly twisted magnetic flux tubes is considered. Linear dispersion relations for the waves are derived and analyzed in the presence of the twisting. The weakly nonlinear dynamics is shown to be governed by the Korteweg-de Vries equation. Nonlinear slow body waves appear as a narrowing of tube in a low β plasma and widening of tube, when β ⪢ 1. Nonlinear Alfvén torsional waves appear as a widening (β > 1) and narrowing (β < 1) of tube, accompanied by the local increase of the tube twisting.     

Study of Rayleigh type surface wave in the initial stressed irregular bottom of ocean due to point source

Rayleigh type surface wave propagation in the irregular bottom of ocean model which is the interface of homogeneous liquid layer over laying an irregular boundary of homogeneous orthotropic half space under initial stresses has been discussed in this paper. Three different dispersion equations are obtained in the form of simple equation using and not using Perturbation technique. Some special cases have been considered. The effect of irregularity, initial stressed, point source, and depth of liquid layer on the propagation of Rayleigh waves has been analyzed and results of numerical discussion have been presented graphically for three different dispersion equations. Mainly the graphs are shown the variation of phase velocity with wave number in different cases.     

无限流体中孔隙介质圆柱周向导波的传播特性

为研究无限大流体约束的孔隙圆柱中周向导波的传播规律,分析孔隙参数对导波传播特性的影响,建立了无限流体中孔隙介质圆柱的理论模型,利用孔隙介质弹性波动理论,建立了周向导波频散方程,通过数值模拟计算得到无限流体中孔隙介质圆柱的频散曲线,探讨了圆柱半径和孔隙参数对导波传播特性的影响,并对导波的衰减特性进行了分析;通过数值计算,得到了周向导波的时域波形,讨论了孔隙参数对波形的影响.结果表明,孔隙介质圆柱半径的改变影响圆柱尺度,孔隙度的改变影响孔隙介质中体声波的波速,都对周向导波频散曲线产生一定的影响,所得到的频散曲线特征及衰减曲线与时域波形吻合.研究结果对开展无限流体中孔隙介质圆柱的超声无损评价提供了一定的理论参考.     

Vibration and waves in a cylinder with screw anisotropy

On the basis of the three-dimensional theory of elasticity, we consider the features of propagation of harmonic waves in a hollow cylinder with screw anisotropy. The main attention is focused on studying axisymmetrical oscillations. To describe low-frequency long-wavelength longitudinal-torsional oscillations by perturbation theory methods, we construct an applied theory and evaluate the area of its applicability. To analyze high-frequency oscillations, a numerical method of determining the critical frequencies and dispersion curves is developed and implemented. It is shown that in the axisymmetrical case, screw anisotropy generates a relation between longitudinal and torsion oscillations, which is mathematically described by the amplitude coefficients of homogeneous waves.     

Natural beam focusing of non-axisymmetric guided waves in large-diameter pipes

The propagation of non-axisymmetric guided waves in larger diameter pipes is studied in this paper by treating the guided waves as corresponding Lamb waves in an unwrapped plate. This approximation leads to a simpler method for calculating the phase velocities of hollow cylinder guided waves, which reveals a beam focusing nature of non-axisymmetric guided waves generated by a partial source loading. The acoustic fields in a pipe generated by a partial-loading source includes axisymmetric longitudinal modes as well as non-axisymmetric flexural modes. The circumferential distribution of the total acoustic field, also referred as an angular profile, diverges circumferentially while guided waves propagate with dependence on such factors as mode, frequency, cylinder size, propagation distance, etc. Exact prediction of the angular profile of the total field can only be realized by numerical calculations. In particular cases, however, when the wall thickness is far less than the cylinder diameter and the wavelength is smaller than or comparable to the pipe wall thickness, the acoustic field can be analyzed based on the characteristics of Lamb waves that travel along a periodic unwrapped plate. Based on this assumption, a simplified model is derived to calculate the phase velocities of non-axisymmetric flexural mode guided waves. The model is then applied to discussions on some particular characteristics of guided-wave angular profiles generated by a source loading. Some features of flexural modes, such as cutoff frequency values are predicted with the simpler model. The relationship between the angular profiles and other factors such as frequency, propagation distance, and cylinder size is obtained and presented in simple equations. The angular profile rate of change with respect to propagation distance is investigated. In particular, our simplified model for non-axisymmetric guided waves predicts that the wave beam will converge to its original circumferential shape after the wave propagates for a certain distance. A concept of "natural focal point" is introduced and a simple equation is derived to compute the 1st natural focal distance of non-axisymmetric guided waves. The applicable range of the simplified equation is provided. Industrial pipes meet the requirement of wall thickness being far less than the pipe diameter. The approximate analytical algorithms presented in this paper provides a convenient method enabling quick acoustic field analysis on large-diameter industrial pipes for NDE applications.     

Guided wave propagation and mode differentiation in hollow cylinders with viscoelastic coatings

Guided wave propagation theories have been widely explored for about one century. Earlier theories on single-layer elastic hollow cylinders have been very beneficial for practical nondestructive testing on piping and tubing systems. Guided wave flexural (nonaxisymmetric) modes in cylinders can be generated by a partial source loading or any nonaxisymmetric discontinuity. They are especially important for guided wave mode control and defect analysis. Previous investigations on guided wave propagation in multilayered hollow cylindrical structures mostly concentrate on the axisymmetric wave mode characteristics. In this paper, the problem of guided wave propagation in free hollow cylinders with viscoelastic coatings is solved by a semianalytical finite element (SAFE) method. Guided wave dispersion curves and attenuation characteristics for both axisymmetric and flexural modes are presented. Due to the fact that dispersion curve modes obtained from SAFE calculations are difficult to differentiate from each other, a mode sorting method is established to distinguish modes by their orthogonality. Theoretical proof of the orthogonality between guided wave modes in a viscoelastic coated hollow cylinder is provided. Wave structures are also calculated and discussed in view of wave mechanics in multilayered cylindrical structures containing viscoelastic materials.     

Ultrasonic transient bounded-beam propagation in a solid cylinder waveguide embedded in a solid medium

A semianalytical solution alternative and complementary to modal technique is presented to predict and interpret the ultrasonic pulsed-bounded-beam propagation in a solid cylinder embedded in a solid matrix. The spectral response to an inside axisymmetric velocity source of longitudinal and transversal cylindrical waves is derived from Debye series expansion of the embedded cylinder generalized cylindrical reflection/transmission coefficients. So, the transient guided wave response, synthesized by inverse double Fourier-Bessel transform, is expressed as a combination of the infinite medium contribution, longitudinal, transversal, and coupled longitudinal and transversal waveguide sidewall interactions. Simulated (f, 1/lambdaz) diagrams show the influence of the number of waveguide sidewall interactions to progressively recover dispersion curves. Besides, they show the embedding material filters specific signal portions by concentrating the propagating signal in regions where phase velocity is closer to phase velocity in steel. Then, simulated time waveforms using broadband high-frequency excitation show that signal leading portions exhibit a similar periodical pattern, for both free and embedded waveguides. Debye series-based interpretation shows that double longitudinal/transversal and transversal/longitudinal conversions govern the time waveform leading portion as well as the radiation attenuation in the surrounding cement grout. Finally, a methodology is deduced to minimize the radiation attenuation for the long-range inspection of embedded cylinders.     

Wave propagation in non-homogeneous magneto-electro-elastic hollow cylinders

A dynamic solution is presented for the propagation of harmonic waves in imhomogeneous (functionally graded) magneto-electro-elastic hollow cylinders composed of piezoelectric BaTiO₃ and magnetostrictive CoFe₂O₄. The materials properties are assumed to vary in the direction of the thickness according to a known variation law. The Legendre orthogonal polynomial series expansion approach is employed to determine the wave propagating characteristics in the hollow cylinders. The dispersion curves of the imhomogeneous piezoelectric-piezomagnetic hollow cylinder and the corresponding non-piezoelectric and non-piezomagnetic hollow cylinders are calculated to show the influence of the piezoelectricity and piezomagnetism. Electric potential and magnetic potential distributions are obtained to illustrate the different influences of the piezoelectricity and piezomagnetism and the different influences of the piezoelectric effect and piezomagnetic effect on longitudinal modes and torsional modes. For the radial polarizing piezoelectric-piezomagnetic hollow cylinder, the piezoelectric effect and piezomagnetic effect take mostly on the longitudinal mode. Finally, a hollow cylinder at different ratio of radius to thickness is calculated to show the influence of the ratio on the piezoelectric effect and piezomagnetic effect.     

Study of torsional wave in a poroelastic medium sandwiched between a layer and a half-space of heterogeneous dry sandy media

In this article, the propagation of torsional surface wave in an anisotropic poroelastic layer of finite thickness sandwiched between two heterogeneous dry sandy media is investigated. The first uppermost dry sandy medium is considered as a layer of finite thickness and the second one is considered as a lower half-space. The heterogeneities in both dry sandy media are assumed to arise due to quadratic variations in elastic moduli and mass densities. Whittaker’s functions and variable separable techniques have been taken into the application to calculate the interior deformations inside the assumed model; consequently, we obtain a closed form dispersion relation for the torsional wave using effective boundary conditions. Moreover, casewise dispersion equations for some particular aspects of the problem have been studied, which serve as the focal theme of the study. Some significant observations have been made by detailed numerical calculations and graphical visuals related to the effects of tensile and compressive initial stresses, sandy parameters, heterogeneity parameters, porosity parameter, and thickness ratio parameter on the phase velocity of the torsional wave.     

Correlation between helical surface waves and guided modes of an infinite immersed elastic cylinder

Scattering of obliquely incident plane acoustic waves from immersed infinite solid elastic cylinders is a complex phenomenon that involves generation of various types of surface waves on the body of the cylinder. Mitri [F.G. Mitri, Acoustic backscattering enhancement resulting from the interaction of an obliquely incident plane wave with an infinite cylinder, Ultrasonics 50 (2010) 675-682] recently showed that for a solid aluminum cylinder, there exist acoustic backscattering enhancements at a normalized frequency of ka?0.1. The incidence angle α_c at which these enhancements are observed lies between the first (longitudinal) and second (shear) coupling angles of the cylinder. He also confirmed the observations previously reported by the authors that there exist backscattering enhancements of the dipole mode at large angles of incidence where no wave penetration into the cylinder is expected. In this paper, physical explanations are provided for the aforementioned observations by establishing a correlation between helical surface waves generated by oblique insonification of an immersed infinite solid elastic cylinder and the longitudinal and flexural guided modes that can propagate along the cylinder. In particular, it is shown that the backscattering enhancement observed at ka?0.1 is due to the excitation of the first longitudinal guided mode travelling at the bar velocity along the cylinder. It is also demonstrated that the dipole resonance mode observed at incidence angles larger than the Rayleigh coupling angle is associated with the first flexural guided mode of the cylinder. The correlation established between the scattering and propagation problems can be used in both numerical and experimental studies of interaction of mechanical waves with cylinders.     

Propagation of initially bi-harmonic sound waves in a 1D semi-infinite medium with hysteretic non-linearity

Materials with hysteretic non-linearity have the property of memorizing specific previous extrema in the stress/strain loading history. Because of this complexity, the analytical theory describing the non-linear evolution of acoustic waves in such materials is currently restricted to simplex wave propagation processes with a single minimum and a single maximum over a wave period. In the present paper a numerical model is presented which is valid for an arbitrary strain wave profile, and the results for the frequency-mixing process in acoustic waves composed initially of two harmonic frequency components are analyzed. The model simulations demonstrate that an initially complex wave transforms into a simplex wave during propagation. In addition, we have studied the mutual influence of the initial frequency components, and we have found regimes of induced absorption and induced transparency.     

Interface wave propagation characteristics of liquid-immersed porous cylinder

This paper devotes to investigate the propagation characteristics of the interface wave on the liquid-immersed porous cylinder, and special emphasis is paid on the dependence of the dispersion relation on the porous media parameters. A model of liquid-immersed porous cylinder is established theoretically. Based on the elastic-dynamic theory of liquid-saturated porous solid and wave theory, the dispersion curves and transient response of open-pores and sealed-pores are simulated numerically, and their dependence on the cylinder radius and porous medium parameters are analyzed. The results show that the Stoneley-Scholte wave can be clearly distinguished with other waves in the time domain, and the Stoneley-Scholte wave dispersion relates intimately with the porosity of the porous medium and cylinder radius, whilst the permeability of the media has little effect on the dispersion property.     

曲线坐标系下孔隙介质圆柱纵向表面波的传播特性

为了研究孔隙介质圆柱纵向表面波的传播规律,分析其频散和衰减特性,在正交曲线坐标系下建立了表面波的频散方程,通过数值计算得到频散曲线,将纵向导波最低模态与表面波进行对比,并分析了曲率半径及孔隙参数对表面波频散和衰减的影响。结果表明,当频率足够大时,导波最低模态的频散曲线与表面波近似;在同一频率下,表面波的相速度随曲率半径的增大而增大,随孔隙度的增大而减小;表面波的衰减随孔隙度的增大而增大。研究结果为开展孔隙介质圆柱结构的超声无损评价提供了一定的理论参考。     

Modeling the propagation of electromagnetic waves over the surface of the human body

The results of modeling and an experimental study of electromagnetic (EM) waves in microwave range propagating along the surface of the human body have been presented. The parameters of wave propagation, such as the attenuation and phase velocity, have also been investigated. The calculation of the propagation of EM waves by the numerical method FDTD (finite difference time domain), as well as the use of the analytical model of the propagation of the EM wave along flat and curved surfaces has been fulfilled. An experimental study on a human body has been conducted. It has been shown that creeping waves are slow and exhibit a noticeable dispersion, while the surface waves are dispersionless and propagate at the speed of light in free space. A comparison of the results of numerical simulation, analytical calculation, and experimental investigations at a frequency of 2.55 GHz has been carried out.     

Time-harmonic torsional waves in a composite cylinder with an imperfect interface

In this paper, the propagation of time-harmonic torsional waves in composite elastic cylinders is investigated. An imperfect interface is considered where tractions are continuous across the interface and the displacement jump is proportional to the stress acting on the interface. A frequency equation is derived for the rod and dispersion curves of normalized frequency as a function of normalized wave number for elastic bimaterials with varying values for the interface constant F are presented. The analysis is shown to recover the dispersion curves for a bimaterial rod with a perfect (welded) interface (F = 0), and has the correct limiting behavior for large F. It is shown that the modes, at any given frequency, are orthogonal, and it is outlined how the problem of reflection of a torsional mode by a planar defect (such as a circumferential crack) can be treated.     

具微结构地壳中非线性地震波的演化

非线性地震波在地壳中传播及演化规律的研究具有重要实际意义.利用有限差分方法, 对非线性地震纵波和横波在具微结构地壳中的演化过程进行了详细的数值模拟.结果表明,非线性地震纵波和横波在具微结构地壳中可以逐渐演化成一个孤立波或两个孤立波或孤立波列或消失.地震波的初始幅度、频散系数和体力因子对演化过程和结果都有重要影响.研究结果揭示了非线性地震波在一种微结构地壳中的演化规律,这有助于在理论上解释一些特殊地震波现象.     

流体-孔隙介质圆柱界面波传播特性

研究流体-孔隙介质圆柱界面波传播特性,分析孔隙介质孔隙率等参数对频散曲线的影响。理论上建立了无限大流体包裹孔隙介质圆柱界面波的模型,利用孔隙介质弹性波动理论,通过数值模拟计算得到流体-孔隙介质圆柱的频散曲线及时域波形,并分析了孔隙介质为开孔和闭孔状态下孔隙介质圆柱半径、孔隙率及渗透率对频散曲线的影响。结果表明,时域上斯通利波可以被明显区分开,孔隙介质圆柱半径的变化改变了圆柱尺度,孔隙率的变化改变了孔隙介质的纵、横波波速,因此对于斯通利波频散曲线的影响较大。而渗透率的变化既不改变圆柱的尺度也不改变孔隙层的纵、横波速度,因此对斯通利波频散曲线影响较小。      

A numerical approach for the computation of dispersion relations for plate structures using the Scaled Boundary Finite Element Method

In this paper, a method is presented for the numerical computation of dispersion properties and mode shapes of guided waves in plate structures. The formulation is based on the Scaled Boundary Finite Element Method. The through-thickness direction of the plate is discretized in the finite element sense, while the direction of propagation is described analytically. This leads to a standard eigenvalue problem for the calculation of wave numbers. The proposed method is not limited to homogeneous plates. Multi-layered composites as well as structures with continuously varying material parameters in the direction of thickness can be modeled without essential changes in the formulation. Higher-order elements have been employed for the finite element discretization, leading to excellent convergence for complex structures. It is shown by numerical examples that this method provides highly accurate results with a small number of nodes while avoiding numerical problems and instabilities.     

被孔隙介质约束的弹性杆中的导波*

为了研究导波在被孔隙介质约束的弹性杆结构中的传播规律,分析孔隙参数对导波传播特性的影响,本文建立了无限大孔隙介质包裹圆柱体的理论模型,利用孔隙介质弹性波动理论,分析了导波的频散曲线,以及圆柱半径和孔隙参数对于导波传播特性的影响。结果表明,在该结构中传播的纵向导波存在频散特性。内部圆柱半径的改变影响波导结构,从而影响导波传播。外部孔隙介质的渗透率对于导波频散的影响较小,孔隙度的改变影响孔隙介质体波波速,从而影响导波频散曲线的截止频率。同时,导波存在较小的衰减,且衰减随孔隙度增大而增大。这些结果对于后续开展无限大介质包裹弹性杆结构的超声无损评价提供了一定的理论参考。