Electrophoretic deposition of nickel, iron and aluminum nanoparticles on carbon fibers

The electrophoretic deposition (EPD) of nickel (Ni), iron (Fe) and aluminum (Al) nanoparticles fabricated by an active hydrogen plasma evaporation method on the surface of carbon fibers was investigated, which will allow the obtained composites to be applied as practical catalysts or electrodes. SEM observations show that the Ni nanoparticles can build up a thick EPD coating with some cracks on the surface of carbon fibers, and the analyses of X-ray diffraction (XRD) and BET specific surface area indicate that fine particles from the as-received Ni powders were finally deposited after the EPD process without crystal growth. The surface oxidation of Fe and Al nanoparticles takes serious effect on the EPD process and the morphology of the as-prepared coatings.     

Hydroxylation of fullerenes modified with iron nanoparticles

The possibility was explored for synthesizing polyhydroxylated fullerenes directly from soot containing iron nanoparticles stabilized by carbon shell.     

Reduced aggregation and sedimentation of zero-valent iron nanoparticles in the presence of guar gum

Injection of nanoscale zero-valent iron (NZVI) is potentially a promising technology for remediation of contaminated groundwaters. However, the efficiency of this process is significantly hindered by the rapid aggregation of the iron nanoparticles. The aim of this study was to enhance the colloidal stability of the nanoparticles through the addition of the "green" polymer guar gum. We evaluated the properties of guar gum and its influence on the surface properties, particle size, aggregation, and sedimentation of iron nanoparticles. Commercial iron nanoparticles were dispersed in guar gum solutions, and their aggregation and sedimentation behaviors were compared to those of bare iron nanoparticles and commercial nanoparticles modified with a biodegradable polymer (polyaspartate). High performance size exclusion chromatography, charge titration, and viscosity assessment showed that guar gum is a high molecular weight polymer which is nearly neutrally charged, rendering it suitable for steric stabilization of the iron nanoparticles. Electrophoretic mobility measurements demonstrated the ability of guar gum to adsorb on the nanoparticles, forming a slightly negatively charged layer. Dynamic light scattering experiments were conducted to estimate the particle size of the different nanoparticle suspensions and to determine the aggregation behavior at different ionic strengths. Guar gum effectively reduced the hydrodynamic radius of the bare nanoparticles from 500 nm to less than 200 nm and prevented aggregation of the nanoparticles even at very high salt concentrations (0.5 M NaCl and 3 mM CaCl(2)). Sedimentation profiles of the different nanoparticle suspensions confirmed the improved stability of the iron nanoparticles in the presence of guar gum. The results strongly suggest that guar gum can be used to effectively deliver stabilized zero-valent iron nanoparticles for remediation of contaminated groundwater aquifers.     

A cast-mold approach to iron oxide and Pt/iron oxide nanocontainers and nanoparticles with a reactive concave surface

We report the synthesis of various iron oxide nanocontainers and Pt-iron oxide nanoparticles based on a cast-mold approach, starting from nanoparticles having a metal core (either Au or AuPt) and an iron oxide shell. Upon annealing, the particles evolve to asymmetric core-shells and then to heterodimers. If iodine is used to leach Au out of these structures, asymmetric core-shells evolve into "nanocontainers", that is, iron oxide nanoparticles enclosing a cavity accessible through nanometer-sized pores, while heterodimers evolve into particles with a concave region. When starting from a metal domain made of AuPt, selective leaching of the Au atoms yields the same iron oxide nanoparticle morphologies but now encasing Pt domains (in their concave region or in their cavity). We found that the concave nanoparticles are capable of destabilizing Au nanocrystals of sizes matching that of the concave region. In addition, for the nanocontainers, we propose two different applications: (i) we demonstrate loading of the cavity region of the nanocontainers with the antitumoral drug cis-platin; and (ii) we show that nanocontainers encasing Pt domains can act as recoverable photocatalysts for the reduction of a model dye.     

Water-soluble iron oxide nanoparticles with high stability and selective surface functionality

The water dispensability and stability of high quality iron oxide nanoparticles synthesized in organic solvents are major issues for biomedical and biological applications. In this paper, a versatile approach for preparing water-soluble iron oxide nanoparticles with great stability and selective surface functionality (-COOH, -NH(2), or -SH) was demonstrated. The hydrophobic nanoparticles were first synthesized by the thermal decomposition of an iron oleate complex in organic solvent. Subsequently, the hydrophobic coatings of nanoparticles were replaced with poly(acrylic acid) , polyethylenimine, or glutathione, yielding charged nanoparticles in aqueous solution. Two parameters were found to be critical for obtaining highly stable nanoparticle dispersions: the original coating and the surfactant-to-nanoparticle ratio. These charged nanoparticles exhibited different stabilities in biological buffers, which were directly influenced by the surface coatings. This report will provide significant practical value in exploring the biological or biomedical applications of iron oxide nanoparticles.     

Optimization and ecofriendly synthesis of iron oxide nanoparticles as potential antioxidant

The present study involves the use of Box-Behnken design for optimization of the energy-efficient process variables, eco-friendly synthesis of nanoparticles of iron oxide using Coriandrum sativum L. (cilantro) leaf extract. The factors, which significantly influenced mean nanoparticle size, surface charge, and size distribution, were the volume of leaf extract, agitation speed, and temperature. The developed model using Box-Behnken design was validated by synthesizing the iron nanoparticles using optimized operational conditions i.e. 10 ml volume of leaf extract, 1500 rpm agitation speed and 30 °C temperature. This resulted in the formation of highly stable iron oxide nanoparticles with mean particle size 161.5 nm and polydispersity index 0.132 with a zeta potential of −19.5 mV. The free radical inhibitory activity of prepared iron oxide nanoparticles was found comparable to ascorbic acid. These results reveal that iron nanoparticles for a biomedical application can be prepared at ambient temperature in an eco-friendly manner.     

Characterization of zero-valent iron nanoparticles

The iron nanoparticle technology has received considerable attention for its potential applications in groundwater treatment and site remediation. Recent studies have demonstrated the efficacy of zero-valent iron nanoparticles for the transformation of halogenated organic contaminants and heavy metals. In this work, we present a systematic characterization of the iron nanoparticles prepared with the method of ferric iron reduction by sodium borohydride. Particle size, size distribution and surface composition were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), high-resolution X-ray photoelectron spectroscopy (HR-XPS), X-ray absorption near edge structure (XANES) and acoustic/electroacoustic spectrometry. BET surface area, zeta (ζ) potential, iso-electric point (IEP), solution Eh and pH were also measured. Methods and results presented may foster better understanding, facilitate information exchange, and contribute to further research and development of iron nanoparticles for environmental and other applications.     

Computer simulation to investigate magnetic and wave-absorbing characteristics of iron nanoparticles

Computer simulations were carried out to investigate the magnetic and wave-absorbing characteristics of iron nanoparticles. The magnetic properties were found to depend on the shape, aggregation, and array of the nanoparticles. Nanoparticle systems were simulated using a molecular dynamics (MD) method, and the resulting configurations were used to compute the magnetic properties of the systems. In this work, microdot magnetic dipoles were assumed to localize on the iron atoms of nanoparticles. The dynamics of these magnetic dipoles under an external magnetic field were simulated by solving the Landau-Lifshitz-Gilbert equation numerically. The energy loss of a system under an external magnetic field was computed from the hysteresis curve and was correlated with the wave-absorbing characteristic of the system. The findings suggested that the disk-shaped iron particles had a greater hysteresis loss energy than the ball-shaped iron particles. It was also found that the aggregation of nanoparticles apparently reduced the wave-absorbing characteristic of the system. All the outcomes were in good agreement with the experimental measurements.     

Bacteria-mediated precursor-dependent biosynthesis of superparamagnetic iron oxide and iron sulfide nanoparticles

The bacterium Actinobacter sp. has been shown to be capable of extracellularly synthesizing iron based magnetic nanoparticles, namely maghemite (gamma-Fe2O3) and greigite (Fe3S4) under ambient conditions depending on the nature of precursors used. More precisely, the bacterium synthesized maghemite when reacted with ferric chloride and iron sulfide when exposed to the aqueous solution of ferric chloride-ferrous sulfate. Challenging the bacterium with different metal ions resulted in induction of different proteins, which bring about the specific biochemical transformations in each case leading to the observed products. Maghemite and iron sulfide nanoparticles show superparamagnetic characteristics as expected. Compared to the earlier reports of magnetite and greigite synthesis by magnetotactic bacteria and iron reducing bacteria, which take place strictly under anaerobic conditions, the present procedure offers significant advancement since the reaction occurs under aerobic condition. Moreover, reaction end products can be tuned by the choice of precursors used.     

Determination of the oxide layer thickness in core-shell zerovalent iron nanoparticles

Zerovalent iron (nZVI) nanoparticles have long been used in the electronic and chemical industries due to their magnetic and catalytic properties. Increasingly, applications of nZVI have also been reported in environmental engineering because of their ability to degrade a wide variety of toxic pollutants in soil and water. It is generally assumed that nZVI has a core-shell morphology with zerovalent iron as the core and iron oxide/hydroxide in the shell. This study presents a detailed characterization of the nZVI shell thickness using three independent methods. High-resolution transmission electron microscopy analysis provides direct evidence of the core-shell structure and indicates that the shell thickness of fresh nZVI was predominantly in the range of 2-4 nm. The shell thickness was also determined from high-resolution X-ray photoelectron spectroscopy (HR-XPS) analysis through comparison of the relative integrated intensities of metallic and oxidized iron with a geometric correction applied to account for the curved overlayer. The XPS analysis yielded an average shell thickness in the range of 2.3-2.8 nm. Finally, complete oxidation reaction of the nZVI particles by Cu(II) was used as an indication of the zerovalent iron content of the particles, and these observations further correlate the chemical reactivity of the particles and their shell thicknesses. The three methods yielded remarkably similar results, providing a reliable determination of the shell thickness, which fills an essential gap in our knowledge about the nZVI structure. The methods presented in this work can also be applied to the study of the aging process of nZVI and may also prove useful for the measurement and characterization of other metallic nanoparticles.     

Templated nucleation of hybrid iron oxide nanoparticles on polysaccharide nanogels

Novel organic–inorganic hybrid nanoparticles consisting of polymer–hydrogel nanoparticles (nanogels) and iron oxide were developed for potential biomedical applications. Hybrid nanoparticles were prepared by a simple procedure using polysaccharide nanogels as a reactive site for iron oxide formation. The hybrid nanoparticles have a narrow size distribution with a diameter of approximately 30 nm and show high colloidal stability. These nanohybrid particles could be used as a contrast medium for magnetic resonance imaging or for magnetic hyperthermia therapy.     

Microstructure changes to iron nanoparticles during discharge/charge cycles

Iron nanoparticles that were synthesized by chemical reduction were used as the active material at the electrode, followed by measurement of their capacity during discharge/charge cycles. The discharge capacity of the first cycle was extremely high, 510 mAh/g-Fe, at a current density of 200 mA/g-Fe, indicating a marked increase in the capacity and the output current of iron electrodes when nanoparticles of iron, instead of micron-sized particles were used as the active materials. However, this capacity deteriorated rapidly during the discharge/charge cycles, while the size of iron nanoparticles increased, suggesting that the dissolution and re-crystallization of iron could have occurred during these cycles. A good correlation was found between the capacities and the surface areas of iron nanoparticles following each cycle. Our result further demonstrated that the capacity depends only on the surface area of iron particles, varying by 30 mAh with every 1 m² of iron.     

Synthesis of iron nanoparticles via chemical reduction with palladium ion seeds

We report on the synthesis of highly monodisperse iron nanoparticles, using a chemical reduction method. Iron nanoparticles with an average diameter of 6 nm and a geometric standard deviation of 1.3 were synthesized at a pH of 9.50 from ferric chloride precursor with sodium borohydride as the reducing agent, polyacrylic acid as the dispersing agent, and palladium ions as seeds for iron nanoparticle nucleation. The resulting nanoparticles were ferromagnetic at 5 K and superparamagnetic at 350 K. The dispersing agent polyacrylic acid (PAA) was shown to prevent iron nanoparticles and possibly palladium clusters from aggregating; in the absence of PAA, only aggregated iron nanoparticles were obtained. The addition of palladium ions decreased the diameter of iron nanoparticles presumably by providing sites for heterogeneous nucleation onto palladium clusters. In the absence of palladium ions, the mean diameter of iron nanoparticles was approximately 110 nm and the standard deviation increased to 2.0. The pH of the solution also was found to have a significant effect on the particle diameter, likely by affecting PAA ionization and altering the conformation of the polymer chains. At lower pH (8.75), the PAA is less ionized and its ability to disperse palladium clusters is reduced, so the number of palladium seeds decreases. Therefore, the resulting iron nanoparticles were larger, 59 nm in diameter, versus 6 nm for nanoparticles formed at a pH of 9.50.     

Fibroporous polytetrafluoroethylene modified with iron nanoparticles: Structure and electronic and magnetic properties

A method for synthesizing iron-containing nanocomposite based on fibroporous polytetrafluoroethylene (PTFE) is described. Fibroporous PTFE obtained under the radiation of a CO₂ laser on block PTFE is modified in supercritical carbon dioxide (sc CO₂) to form micro- and nanoporous structures. Porous fluoropolymer is treated with a solution of bis(toluene)iron(0) obtained by metal-vapor synthesis (MVS). The composition and structure of iron-containing fluoropolymer is studied by transmission electron microscopy and X-ray photoelectron and Mössbauer spectroscopy. Fe nanoparticles with an average size of 9 nm, consisting of ～30% FeO and ～70% Fe³⁺, are registered in the sample. Fe⁰ nanoparticles are stabilized in fluoropolymer pores and are coated with nanoparticles of nonstoichiometric iron oxides that have superparamagnetic properties.     

Effect of iron nanoparticles in the films of composite materials and carbon nanotubes on the angular dependence of X-ray emission

The angular dependences of X-ray emission were measured for a series of polymer film samples with different concentration of finely dispersed iron. X-ray fluorescence maximum was found to shift toward higher angles with increasing the iron concentration in a sample. The form of angular dependences of X-ray emission was calculated taking into account the particle absorption coefficients in a composite material for incident and emitted radiation. The experimental and theoretical dependences were compared to estimate the content of nanoparticles in the polymer composite and iron nanoparticles in the samples of oriented carbon nanotubes.     

磁性铁氧化物纳米粒子制备及其体内应用研究

磁性铁氧化物纳米粒子由于其生物相容性和低毒性而广泛的应用于生物医学领域。本文总结了近年来制备各种磁性铁氧化物纳米粒子的方法,比较了它们在粒径、结晶度以及制备条件等方面的优缺点,概括了对其进行表面修饰改性材料的种类,阐述近年来磁性铁氧化物纳米粒子在体内应用中药物运输、磁共振成像、磁热疗方面的进展,并指出当前应用中的主要方向和亟待解决的问题。     

Tunable magnetic arrangement of iron oxide nanoparticles in situ synthesized on the solid substrate from diblock copolymer micelles

Hexagonal arrangement of iron oxide nanoparticles was fabricated by utilizing a single-layered film of diblock copolymer micelles. The synthesis was directly performed on the solid substrate by oxygen plasma with preserving the dimensional order of micelles so that separate procedures for synthesis and deposition of nanoparticles were not necessary. Since the oxygen plasma treatment also eliminated polymers, pure patterns of iron oxide nanoparticles were obtained. Moreover, easy control over the size of nanoparticles enabled us to selectively create a ferrimagnetic or a superparamagnetic pattern of iron oxide nanoparticles without altering the fabrication process.     

A rapid synthesis of iron phosphate nanoparticles via surface-mediated spontaneous reaction for the growth of high-yield, single-walled carbon nanotubes

The direct formation of iron phosphate nanoparticles on hydroxyl-terminated SiO(2)/Si substrates with a narrow size distribution (average diameter = 2.2 nm) is achieved by a simple room temperature spontaneous reaction of ferric chloride and phosphoric acid. Single-walled carbon nanotubes (SWNTs) are grown in high yield from the synthesized iron phosphate nanoparticles by the thermal chemical vapor deposition (CVD) method, as confirmed by atomic force microscopy (AFM) and Raman spectroscopy. Furthermore, three-terminal, p-type, nanotube network field effect transistor (FET) devices are successfully fabricated using the synthesized SWNTs via the photolithography technique. The reduced solubility of Fe(III) ions when they form iron phosphate salts in aqueous media is the main driving force for the nanoparticle formation. Systematic control experiments reveal that the surface property, concentration, and pH of the reaction solution play equally important roles in the formation of nanoparticles.     

Stable cluster formation in aqueous suspensions of iron oxyhydroxide nanoparticles

Metal oxide and oxyhydroxide nanoparticles are important components of natural aqueous systems and have application in photocatalysis. Uncoated (oxyhydr)oxide nanoparticles can form charge-stabilized colloids in water, but the precise regimes of dispersion and aggregation have been determined for very few nanomaterials. We studied the colloidal behavior of approximately 6 nm nanoparticles of iron oxyhydroxide (FeOOH), a common natural nanoscale colloid, and found that these nanoparticles formed stable suspended clusters under a range of aqueous conditions. Light and X-ray scattering methods show that suspended fractal nanoclusters are formed between pH 5 and 6.6 with well-defined maximum diameters that can be varied from 25 nm to approximately 1000 nm. The nanoclusters retain a very high surface area, and persist in suspension for at least 10 weeks in solution. The process is partially reversible because optically transparent suspensions are regained when nanoparticles that aggregated and settled at pH >7 are adjusted to pH 4 without stirring. However, completely redispersed nanoparticles are not obtained even after one month. Because nanocluster formation is controlled predominantly by surface charge, we anticipate that many metal oxide and other inorganic nanoparticles will exhibit equivalent cluster-forming behavior. Our results indicate that natural nanoparticles could form stable nanoclusters in groundwater that are likely to be highly mobile, with implications for the long-range transport of surface sorbed contaminants.     

The fate of iron nanoparticles used for treatment of iron deficiency in blood using mass-spectrometry based strategies

The release of iron from iron nanoparticles (NPs) used as parenteral formulations appears to be influenced by the size and surface properties of the colloidal iron complex and the matrix. A clinically applied product Venofer® has been used as a model formulation to establish adequate analytical strategies to evaluate the fate of iron nanoparticles (NPs) in blood. First, the preparation was characterized by high resolution transmission electron microscopy (HR-TEM), dynamic light scattering (DLS) and UV-vis absorption spectroscopy. This revealed the presence of monodisperse iron NPs with a hydrodynamic diameter of ～15 nm and an iron core of ～4 nm. Venofer® was then incubated with serum and whole blood in a quantitative study on the iron bioavailability from these NPs. Iron was speciated and quantified by using inductively coupled plasma mass spectrometry (ICP-MS). Iron solubilization levels of up to 42% were found in both fluids using isotope dilution of iron for quantification within the first hour of incubation even in the absence of the reticulo-endothelial system. The monitoring of the iron-containing proteins present in serum was conducted by high-performance liquid chromatography with ICP-MS detection. It indicated that the dissolved iron ions are bound to transferrin. Quantitative speciation studies using isotope pattern deconvolution experiments concluded that the released iron saturated almost completely (up to 90%) the metal binding sites of transferrin. The remaining iron appeared also associated to albumin and, to a lesser extent, forming smaller sized particles. Thus, the methods presented here provide new insights into the fate of Venofer® nanoparticles and may be applied to other formulations.

Open image in new window

Graphical abstract The release of iron ions from sucrose covered iron nanoparticles used as parenteral formulations is evaluated in serum and whole blood by elemental mass spectrometry.