Synthesis and structural characterization of Al4Si2C5-homeotypic aluminum silicon oxycarbide, (Al6−xSix)(OyC5−y) (x∼0.8 and y∼1.6)

We have prepared a new layered oxycarbide, [Al_5.25(5)Si_0.75(5)][O_1.60(7)C_3.40(7)], by isothermal heating of (Al_4.4Si_0.6)(O_1.0C_3.0) at 2273 K near the carbon-carbon monoxide buffer. The crystal structure was characterized using X-ray powder diffraction, transmission electron microscopy and energy dispersive X-ray spectroscopy (EDX). The title compound is trigonal with space group R3?m (centrosymmetric), Z=3, and hexagonal cell dimensions a=0.32464(2) nm, c=4.00527(14) nm and V=0.36556(3) nm³. The atom ratios Al:Si were determined by EDX, and the initial structural model was derived by the direct methods. The final structural model showed the positional disordering of one of the three types of Al/Si sites. The reliability indices were R_wp=4.45% (S=1.30), R_p=3.48%, R_B=2.27% and R_F=1.25%. The crystal is composed of three types of domains with nearly the same fraction, one of which has the crystal structure of space group R3¯m. The crystal structure of the remaining two domains, which are related by pseudo-symmetry inversion, is noncentrosymmetric with space group R3m.     

Synthesis and structural characterization of Al4SiC4-homeotypic aluminum silicon oxycarbide, [Al4.4Si0.6][O1.0C2.0]C

A new quaternary layered oxycarbide, [Al_4.39(5)Si_0.61(5)]_Σ5[O_1.00(2)C_2.00(2)]_Σ3C, has been synthesized and characterized by X-ray powder diffraction, transmission electron microscopy and energy dispersive X-ray spectroscopy (EDX). The title compound was found to be hexagonal with space group P6₃/mmc, Z=2, and unit-cell dimensions a=0.32783(1) nm, c=2.16674(7) nm and V=0.20167(1) nm³. The atom ratios Al:Si were determined by EDX, and the initial structural model was derived by the direct methods. The final structural model showed the positional disordering of one of the three types of Al/Si sites. The maximum-entropy methods-based pattern fitting (MPF) method was used to confirm the validity of the split-atom model, in which conventional structure bias caused by assuming intensity partitioning was minimized. The reliability indices calculated from the MPF were R_wp=3.73% (S=1.20), R_p=2.94%, R_B=1.04% and R_F=0.81%. The crystal was an inversion twin. Each twin-related individual was isostructural with Al₄SiC₄ (space group P6₃mc, Z=2).     

A Novel Boron-Rich Scandium Borocarbide; Sc4.5−xB57−y+zC3.5−z(x=0.27, y=1.1, z=0.2)

A novel ternary boron-rich scandium borocarbide Sc_4.5−xB_57−y+zC_3.5−z (x=0.27, y=1.1, z=0.2) was found. Single crystals were obtained by the floating zone method by adding a small amount of Si. Single-crystal structure analysis revealed that the compound has an orthorhombic structure with lattice constants of a=1.73040(6), b=1.60738(6) and c=1.44829(6) nm and space group Pbam (No. 55). The crystal composition ScB_13.3C_0.78Si_0.008 calculated from the structure analysis agreed with the measured composition of ScB_12.9C_0.72Si_0.004. The orthorhombic crystal structure is a new structure type of boron-rich borides and there are six structurally independent B₁₂ icosahedra I1—I6, one B₈/B₉ polyhedron and nine bridging sites all which interconnect each other to form a three-dimensional boron framework. The main structural feature of the boron framework structure can be understood as a layer structure where two kinds of boron icosahedron network layer L1 and L2 stack each other along the c-axis. There are seven structurally independent Sc sites in the open spaces between the boron icosahedron network layers.     

A novel boron-rich quaternary scandium borocarbosilicide Sc3.67−xB41.4−y−zC0.67+zSi0.33−w

A novel quaternary scandium borocarbosilicide Sc_3.67−xB_41.4−y−zC_0.67+zSi_0.33−w was found. Single crystallites were obtained as an intergrowth phase in the float-zoned single crystal of Sc_0.83−xB_10.0−yC_0.17+ySi_0.083−z that has a face-centered cubic crystal structure. Single crystal structure analysis revealed that the compound has a hexagonal structure with lattice constants a = b = 1.43055(8) nm and c = 2.37477(13) nm and space group (No. 187). The crystal composition calculated from the structure analysis for the crystal with x = 0.52, y = 1.42, z = 1.17, and w = 0.02 was ScB_12.3C_0.58Si_0.10 and that agreed rather well with the composition of ScB_11.5C_0.61Si_0.04 measured by EPMA. In the crystal structure that is a new structure type of boron-rich borides, there are 79 structurally independent atomic sites, 69 boron and/or carbon sites, two silicon sites and eight scandium sites. Boron and carbon form seven structurally independent B₁₂ icosahedra, one B₉ polyhedron, one B₁₀ polyhedron, one irregularly shaped B₁₆ polyhedron in which only 10.7 boron atoms are available because of partial occupancies and 10 bridging sites. All polyhedron units and bridging site atoms interconnect each other forming a three-dimensional boron framework structure. Sc atoms reside in the open spaces in the boron framework structure.     

Synthesis and structural characterization of a new aluminum oxycarbonitride, Al5(O, C, N)4

A new aluminum oxycarbonitride, Al₅(O_xC_yN_4−x−y) (x∼1.4 and y∼2.1), has been synthesized and characterized by X-ray powder diffraction, transmission electron microscopy and electron energy loss spectroscopy (EELS). The title compound was found to be hexagonal with space group P6₃/mmc, Z=2, and unit-cell dimensions a=0.328455(6) nm, c=2.15998(3) nm and V=0.201805(6) nm³. The atom ratios O:C:N were determined by EELS. The final structural model, which is isomorphous with that of (Al_4.4Si_0.6)(O_1.0C_3.0), showed the positional disordering of one of the three types of Al sites. The maximum-entropy method-based pattern fitting (MPF) method was used to confirm the validity of the split-atom model, in which conventional structure bias caused by assuming intensity partitioning was minimized. The reliability indices calculated from the MPF were R_wp=6.94% (S=1.22), R_p=5.34%, R_B=1.35% and R_F=0.76%. The crystal was an inversion twin. Each twin-related individual was isostructural with Al₅C₃N (space group P6₃mc, Z=2).     

Fluorinated transition alumina with Al2−x/3O3−xFx compositions: Thermal, chemical, structural and morphological investigations

Fluorinated transition aluminas (Al_2−x/3O_3−xF_x) with hexagonal platelet shape were synthesized via decomposition of α-AlF₃ under air; they are thermally stable up to 1000 °C and exhibit at 1150 °C a weight loss with volume reduction caused by fluorine departure corresponding to a phase transition toward corundum alumina. The different characterizations performed in this study are structural (XRD), chemical (TGA-MS and microprobe analysis) and morphological (SEM, TEM and dilatometry). The evidence provided from this study is consistent with the formation of an Al-O-F phase as an intermediate compound in the pyrohydrolysis of an aluminium trifluoride phase to α-Al₂O₃.     

Crystal structure, thermal expansion and conductivity of anisotropic La1−xSrxGa1−2xMg2xO3−y (x=0.05, 0.1) single crystals

Crystal structure and anisotropy of the thermal expansion of single crystals of La_1−xSr_xGa_1−2xMg_2xO_3−y (x=0.05 and 0.1) were measured in the temperature range 300-1270 K. High-resolution X-ray powder diffraction data obtained by synchrotron experiments have been used to determine the crystal structure and thermal expansion. The room temperature structure of the crystal with x=0.05 was found to be orthorhombic (Imma, Z=4, a=7.79423(3) Å, b=5.49896(2) Å, c=5.53806(2) Å), whereas the symmetry of the x=0.1 crystal is monoclinic (I2/a, Z=4, a=7.82129(5) Å, b=5.54361(3) Å, c=5.51654(4) Å, β=90.040(1)°). The conductivity in two orthogonal directions of the crystals has been studied. Both, the conductivity and the structural data indicate three phase transitions in La_0.95Sr_0.05Ga_0.9Mg_0.1O_2.92 at 520-570 K (Imma-I2/a), 770 K (I2/a-R3c) and at 870 K (R3c-R-3c), respectively. Two transitions at 770 K (I2/a-R3c) and in the range 870-970 K (R3c-R-3c) occur in La_0.9Sr_0.1Ga_0.8Mg_0.2O_2.85.     

Crystal Structure of Pseudorhombohedral InFe1−xTixO3+x/2 (x=2/3)

The structure of pseudorhombohedral-type InFe_1−xTi_xO_3−x/2 (x=2/3) was refined by Rietveld profile fitting. The crystal is a commensurate member of a series in a solution range on InFeO₃-In₂Ti₂O₇ including incommensurate structures. The structure with the unit cell of a=5.9188(1), b=10.1112(2), and c=6.3896(1) Å, β=108.018(2)°, and a space group P2₁/a is the alternate stacking of an edge-shared InO₆ octahedral layer and an Fe/Ti-O plane along c^*. Metal sites on the Fe/Ti-O plane are surrounded by four oxygen atoms on the Fe/Ti-O plane and two axial ones. Electric conductivities of the order 10⁻⁴ S/cm were observed for the samples at 1000 K, while the oxide ion transport number is almost zero as no electromotive force was detected by an oxygen concentration cell.     

Crystal structure of Bi1−xTbxFeO3 from high-resolution neutron diffraction

Samples of Bi_1−xTb_xFeO₃, with x=0.05, 0.10, 0.15, 0.20 and 0.25, have been synthesised by solid state reaction. The crystal structures of the perovskite phases, characterised via Rietveld analysis of high resolution powder neutron diffraction data, reveal a structural transition from the R3c symmetry of the parent phase BiFeO₃ to orthorhombic Pnma symmetry, which is complete for x=0.20. The x=0.10 and 0.15 samples are bi-phasic. The transition from a rhombohedral to orthorhombic unit cell is suggested to be driven by the dilution of the stereochemistry of the Bi³⁺ lone pair at the A-site. The G-type antiferromagnetic spin structure, the size of the ordered magnetic moment (∼3.8 μ_B) and the T_N (∼375 °C) are relatively insensitive to increasing Tb concentrations at the A-site.     

Crystal structure, characterization and thermoelectric properties of the type-I clathrate Ba8−ySryAl14Si32 (0.6≤y≤1.3) prepared by aluminum flux

The title compound was prepared as single crystals using an aluminum flux technique. Single crystal and powder X-ray diffraction indicate that this composition crystallizes in the clathrate type-I structure, space group Pm3?n. Electron microprobe characterization indicates the composition to be Ba_8−ySr_yAl_14.2(2)Si_31.8(2) (0.77<y<1.3). Single-crystal X-ray diffraction data (90 and 12 K) were refined with the Al content fixed at the microprobe value (12 K data: R₁=0.0233, wR₂=0.0441) on a crystal of compositions Ba. The Sr atom preferentially occupies the 2a position; mixed Al/Si occupancy was found on all framework sites. These refinements are consistent with a fully occupied framework and nearly fully occupied cation guest sites as found by microprobe analysis. Temperature dependent electrical resistivity and thermal conductivity have been measured from room temperature to 1200 K on a hot-pressed pellet. Electrical resistivity reveals metallic behavior. The negative Seebeck coefficient indicates transport processes dominated by electrons as carriers. Thermal conductivity is between 22 and 25 mW/cm K. The sample shows n-type conductivity with a maximum figure of merit, zT of 0.3 at 1200 K. A single parabolic band model predicts a five-fold increase in zT at 800 K if carrier concentration is lowered.     

Thermochemistry of La0.7Sr0.3Mn1−xFexO3 solid solutions (0<x<1)

The structure, the energetics and the internal redox reactions of La_0.7Sr_0.3Fe_xMn_1−xO₃ have been studied in the complete solid solution range 0.0<x<1.0. High temperature oxide melt drop solution calorimetry was performed to determine the enthalpies of formation from binary oxides and the enthalpy of mixing. There is a noticeable change in the energetics of the solid solution near x=0.7, which is due to the growing concentration of Fe⁴⁺ at higher Fe/(Fe+Mn) ratio. The balance between different valences of the transition metals, Mn and Fe, is the main factor in determining the energetics of the La_0.70Sr_0.30Fe_xMn_1−xO₃ solid solution.     

Pressure-induced phase transitions in Al2(WO4)3

The high pressure behavior of aluminum tungstate [Al₂(WO₄)₃] has been investigated up to ∼18 GPa with the help of Raman scattering studies. Our results confirm the recent observations of two reversible phase transitions below 3 GPa. In addition, we find that this compound undergoes two more phase transitions at ∼5.3 and ∼6 GPa before transforming irreversibly to an amorphous phase at ∼14 GPa.     

MoO3-C3N4复合光催化剂的可见光下高效催化降解甲基橙

以钼酸铵和C₃N₄为前驱体,利用浸渍法成功制备了高性能MoO₃-C₃N₄复合光催化剂,利用X射线衍射（XRD）、傅里叶红外（FT-IR）、高分辨电镜（HRTEM）及N₂吸附-脱附曲线等测试手段对所得MoO₃-C₃N₄光催化剂进行了结构和形貌表征。以可见光下光催化降解甲基橙反应表征MoO₃-C₃N₄的光催化活性。实验结果表明,MoO₃-C₃N₄光催化剂具有非常好的光催化降解性能,且MoO₃含量对反应活性产生显著影响。当MoO₃含量为1.6%（w/w）时光催化活性最好,其速率常数达到C₃N₄的50倍。通过研究发现该复合催化剂的高活性来自于其Z型光生载流子传输过程,抑制了光生电子空穴对的复合并延长了引入MoO₃产生的载流子的寿命。     

Room temperature photoluminescence of amorphous BaxSr1−xTiO3 doped with chromium

ABO₃ amorphous materials, such as BaTiO₃ (BT), SrTiO₃ (ST), PbTiO₃ (PT), and Ba_xSr_1−xTiO₃ (BST) have recently attracted a good deal of attention due to their ferroelectric and electro-optical properties. Intense photoluminescence at room temperature was observed in amorphous titanate doped with chromium (Ba_xSr_1−xTi_1−yCr_yO₃) prepared by the polymeric precursor method. Results indicated that substantial luminescence at room temperature was achieved with the addition of small Cr contents to amorphous Ba_xSr_1−xTi_1−yCr_yO₃. Further addition of Cr or crystallization were deleterious to the intensity of the luminescent peak obtained for excitation using λ=488.0 nm.     

O MAS NMR study of the oxygen local environments in the anionic conductors Y2(B1−xB′x)2O7(B, B′=Sn, Ti, Zr)

The local environments for oxygen in yttrium-containing pyrochlores and fluorites, Y₂(B_1−xB′_x)₂O₇ (B=Ti, B′=Sn, Zr) are investigated by using solid state ¹⁷O MAS NMR spectroscopy. The quadrupolar coupling constants of the nucleus, ¹⁷O are sufficiently small for these ionic oxides, that high-resolution spectra are obtained from the MAS spectra. Different oxygen NMR resonances are observed due to local environments with differing numbers of metal cations (Y³⁺, Sn⁴⁺, Ti⁴⁺ and Zr⁴⁺), allowing the numbers of different local environments to be quantified and cation mixing to be investigated. Evidence for pyrochlore-like local ordering is detected for Y₂Zr₂O₇, which nominally adopts the fluorite structure.     

Structure and magnetic properties of the Al1−xGaxFeO3 family of oxides: A combined experimental and theoretical study

Magnetic properties of the Al_1−xGa_xFeO₃ family of oxides crystallizing in a non-centrosymmetric space group have been investigated in detail along with structural aspects by employing X-ray and neutron diffraction, Mössbauer spectroscopy and other techniques. The study has revealed the occurrence of several interesting features related to unit cell parameters, site disorder and ionic size. Using first-principles density functional theory based calculations, we have attempted to understand how magnetic ordering and related properties in these oxides depend sensitively on disorder at the cation site. The origin and tendency of cations to disorder and the associated properties are traced to the local structure and ionic sizes.     

Solvothermal Synthesis of Superfine Li1−xMn2O4−σ Powders

Superfine Li_1−xMn₂O_4−σ powders were successfully synthesized by the alcohol-thermal method using 0.01 mol of MnO₂, 0.01mol of LiOH·H₂O, and 0.06mol of NaOH as starting materials at 160-200°C. The products are characterized by XRD, TEM, ED, BET, and ICP. Results show that the Li_0.74Mn₂O_3.74 powder prepared at 200°C has an average size of 180 nm with BET surface areas of 16.44 m²/g. A possible formation mechanism is proposed. It was concluded that the alcohol acts not only as the solvent but also as the reducing agent in the synthesis of Li_1−xMn₂O_4−σ powders. The effects of reaction temperature and the contents of NaOH and LiOH on the formation of single phase Li_1−xMn₂O_4−σ were investigated.     

g-C3N4/CaTi2O5复合材料制备及其光催化性能

利用类石墨氮化碳（g-C₃N₄）和亚稳相钙钛氧化物（CaTi₂O₅）固相法制备C₃N₄/CaTi₂O₅复合材料。利用X射线衍射（XRD）、金相显微镜、扫描电子显微镜（SEM）及附带能谱分析仪（EDS）和N₂吸附-脱附对样品的显微结构和比表面积进行检测分析,并用紫外-可见吸收光度计（UV-Vis）测试了样品的光吸收性能,研究C₃N₄与CaTi₂O₅物质的量之比（n_C3N4/nCaTi₂O₅）对C₃N₄/CaTi₂O₅复合样品的物相结构和微观形貌的影响,同时考察C₃N₄/CaTi₂O₅复合样品在可见光照射下光催化降解罗丹明染料效果。实验结果表明：相比纯C₃N₄和CaTi₂O₅样品,C₃N₄/CaTi₂O₅复合样品在可见光下具有较高的光催化性能,随着n_C3N4/nCaTi₂O₅增加,样品的光催化降解率随之增加而后降低,当n_C3N4/nCaTi₂O₅=1：1时,样品的光催化降解率达到最大值99.5%,并且循环重复利用5次后,样品的光催化剂降解率仍几乎保持不变。复合样品光催化性能提高主要归因于复合能级结构有效地抑制了电子和空穴复合所致。     

The Crystal Structures, Microstructure and Ionic Conductivity of Ba2In2O5 and Ba(InxZr1−x)O3−x/2

This paper describes the results of electron microscopy, high-temperature powder neutron diffraction, and impedance spectroscopy studies of brownmillerite-structured Ba₂In₂O₅ and perovskite structured Ba(In_xZr_1−x)O_3−x/2. The ambient temperature structure of Ba₂In₂O₅ is found to adopt Icmm symmetry, with disorder of the tetrahedrally coordinated (In³⁺) ions of the type observed previously in Sr₂Fe₂O₅. Ba₂In₂O₅ undergoes a ∼6-fold increase in its ionic conductivity over the narrow temperature range from ∼1140 K to ∼1230 K, in broad agreement with previous studies. This transition corresponds to a change from the brownmillerite structure to a cubic perovskite arrangement with disordered anions. Electron microscopy investigations showed the presence of extended defects in all the crystals analyzed. Ba(In_xZr_1−x)O_3−x/2 samples with x=0.1 to 0.9 adopt the cubic perovskite structure, with the lattice parameter increasing with x.