Synthesis and thermochemistry of MgO·3B2O3·3.5H2O

A new magnesium borate MgO·3B₂O₃·3.5H₂O has been synthesized by the method of phase transformation of double salt and characterized by XRD, IR and Raman spectroscopy as well as by TG. The structural formula of this compound was Mg[B₆O₉(OH)₂]·2.5H₂O. The enthalpy of solution of MgO·3B₂O₃·3.5H₂O in approximately 1 mol dm⁻³ HCl was determined. With the incorporation of the standard molar enthalpies of formation of MgO(s), H₃BO₃(s), and H₂O(l), the standard molar enthalpy of formation of −(5595.02±4.85) kJ mol⁻¹ of MgO·3B₂O₃3.5H₂O was obtained. Thermodynamic properties of this compound was also calculated by group contribution method.     

Synthesis, characterization, and thermochemistry of a new form of 2MgO·3B2O3·17H2O

A new magnesium borate, β-2MgO·3B₂O₃·17H₂O, has been synthesized by the method of phase transformation of double salt and characterized by XRD, IR, and Raman spectroscopy as well as by TG. The structural formula of this compound was Mg[B₃O₃(OH)₅]·6H₂O. The enthalpy of solution of β-2MgO·3B₂O₃·17H₂O in approximately 1 mol dm⁻³ HCl was determined. With the incorporation of the standard molar enthalpies of formation of MgO(s), H₃BO₃(s), and H₂O(l), the standard molar enthalpy of formation of −(10256.39±4.93) kJ mol⁻¹ of β-2MgO·3B₂O₃·17H₂O was obtained. Thermodynamic properties of this compound was also calculated by group contribution method.     

Vibrational spectra of Cs2CaCl4·2H2O

The Fourier transform infrared spectra of Cs₂CaCl₄·2H₂O as well as those of a series of its partially deuterated analogues were recorded at room and at liquid-nitrogen temperature (RT and LNT, respectively). The RT Raman spectra of the protiated form and of its almost completely deuterated analogue were also studied. The combined results from the analysis of the spectra were used to assign the observed bands. The mechanical anharmonicity of the OH(D) stretching and bending motions were further analyzed by computing the corresponding anharmonicity constants by several algorithms. The obtained trends in the series of structurally similar compounds were discussed.     

An efficient and one-pot synthesis of 2,4,5-trisubstituted and 1,2,4,5-tetrasubstituted imidazoles catalyzed by InCl3·3H2O

InCl₃·3H₂O was found to be a mild and effective catalyst for the efficient, one-pot, three component synthesis of 2,4,5-trisubstituted imidazoles at room temperature. Moreover, the utility of this protocol was further explored conveniently for the one-pot, four component synthesis of 1,2,4,5-tetrasubstituted imidazoles in high yields.     

ZrOCl2·8H2O: an efficient Lewis acid catalyst for the one-pot multicomponent synthesis of β-acetamido ketones

Aromatic aldehydes were reacted in one-pot with enolisable ketones, acetonitrile and acetyl chloride at ambient temperature in the presence of ZrOCl₂·8H₂O to furnish the corresponding β-acetamido ketones in very good to excellent yields. X-ray crystallographic analysis of one anti-β-acetamido ketone exhibited a two-dimensional supramolecular framework by a combination of N-H?O, C-H?O and C-H?π (arene) hydrogen bonds.     

A mild and efficient chemoselective protection of amines as N-benzyloxycarbonyl derivatives in the presence of La(NO3)3·6H2O under solvent-free conditions

A facile and versatile method for the chemoselective N-benzyloxycarbonylation of amines has been developed by treatment with benzyloxycarbonyl chloride (Cbz-Cl) in the presence of lanthanum(III) nitrate hexahydrate under solvent-free conditions. The method is general for the preparation of N-Cbz derivatives of aliphatic (acyclic and cyclic) and aromatic amines.     

Facile N-tert-butoxycarbonylation of amines using La(NO3)3·6H2O as a mild and efficient catalyst under solvent-free conditions

Facile N-tert-butoxycarbonylation of amines is described by the treatment of various primary, secondary, benzylic and aryl amines with di-tert-butyl dicarbonate in the presence of catalytic amounts of La(NO₃)₃·6H₂O under solvent-free conditions at room temperature to afford N-tert-butylcarbamates in excellent yields.     

The reaction of MgCl2·4H2O with CCl2F2

A new reaction of MgCl₂·4H₂O with CCl₂F₂ is investigated by DTA and TG from room temperature to 350 °C. It is observed that MgF₂ was obtained between 252 and 350 °C, Below the temperature, MgCl₂·4H₂O dehydrates and hydrolyzes to MgCl₂ and Mg(OH)Cl, which are the real reactants of the reaction with CCl₂F₂. The formation of MgF₂ is ascribed to the reaction of MgCl₂ and Mg(OH)Cl with HF, which forms by decomposition of CCl₂F₂ with the taking part in of H₂O released from dehydration of hydrated magnesium chloride on the surface of MgCl₂ and Mg(OH)Cl, which catalyzes the decomposition of CCl₂F₂ in this case. Consequently, the reactions are tested in the fluid-bed condition. It is found that MgF₂ formed at temperatures down to 200 °C in a fluid-bed reactor. This reaction may be used as a method of disposing of the environmentally sensitive CCl₂F₂ (rather than release into the atmosphere). It is also a method for the preparation of MgF₂.     

Highly efficient synthesis of homoallylic alcohols and amines via allylation of aldehydes and imines catalyzed by ZrOCl2·8H2O in water

The allylation of aldehydes and imines has efficiently been carried out by treatment with allyltributylstannane in the presence of a catalytic amount of ZrOCl₂·8H₂O in water to form the corresponding homoallylic alcohols and amines, respectively, in high yields.     

Calorimetric study and thermal analysis of [Gd4/3Y2/3(Gly)6(H2O)4](ClO4)6·5H2O and [ErY(Gly)6(H2O)4](ClO4)6·5H2O (Gly: glycin)

Two solid-state coordination compounds of rare earth metals with glycin, [Gd_4/3Y_2/3(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O and [ErY(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O were synthesized. The low-temperature heat capacities of the two coordination compounds were measured with an adiabatic calorimeter over the temperature range from 78 to 376 K. [Gd_4/3Y_2/3(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O melted at 342.90 K, while [ErY(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O melted at 328.79 K. The molar enthalpy and entropy of fusion for the two coordination compounds were determined to be 18.48 kJ mol⁻¹ and 53.9 J K⁻¹ mol⁻¹ for [Gd_4/3Y_2/3(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O, 1.82 kJ mol⁻¹ and 5.5 J K⁻¹ mol⁻¹ for [ErY(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O, respectively. Thermal decompositions of the two coordination compounds were studied through the thermogravimetry (TG). Possible mechanisms of the decompositions are discussed.     

Selective synthesis of Neu5Ac2en and its oxazoline derivative using BF3·Et2O

Application of the Lewis acid BF₃·Et₂O to the selective synthesis of 5-acetamido-2,6-anhydro-3,5-dideoxy-d-glycero-d-galacto-non-2-enonic acid (Neu5Ac2en) and the related oxazoline, methyl 7,8,9-tri-O-acetyl-2,3,4,5-tetradeoxy-2,3-didehydro-2,3-trideoxy-4′,5′-dihydro-2′-methyloxazolo[5,4-d]- d-glycero-d-talo-non-2-enonate is described.     

Vibrational spectra of WO3·nH2O and WO3 polymorphs

Vibrational spectra of polycrystalline WO₃ hydrates and polymorphs were measured and analyzed. The effect of sampling techniques on IR spectra has been demonstrated. The phase transition into triclinic polymorph (C⁵_2 h → C¹_i) has been revealed for the sample of monoclinic WO₃ prepared as KBr pellet. Using the deuteration method in situ has shown that cubic WO₃ is non-stoichiometric oxide stabilized by residual OH groups of WO₃·H₂O precursor.     

Efficient one-pot synthesis of functionalized piperidine scaffolds via ZrOCl2·8H2O catalyzed tandem reactions of aromatic aldehydes with amines and acetoacetic esters

A highly efficient diastereoselective one-pot synthesis of functionalized piperidines has been developed based on an aqua-compatible ZrOCl₂·8H₂O catalyst via tandem reactions of aromatic aldehydes, amines, and acetoacetic esters.     

Se掺杂WO3·0.5H2O/g-C3N4光电催化剂的析氢反应性能

以二氰二胺、硒粉和钨酸钠为前驱体,采用一锅法成功制备出Se掺杂WO₃·0.5H₂O/g-C₃N₄(Se/WCN)催化剂。并采用X射线衍射仪(XRD)、场发射扫描电子显微镜(FE-SEM)和X射线光电子能谱(XPS)对样品的物相结构、形貌及化学组成进行表征。与原始的WO₃和g-C₃N₄相比,Se/WCN催化剂的起始电位降到了-0.75 V(vs RHE),电流密度高达70 mA·cm^-2,表现出更高的电催化活性。而光照后,Se/WCN的催化性能进一步提升,起始电位从-0.75 V(vs RHE)降至-0.65 V(vs RHE),电荷转移电阻由371.4Ω减小到310.0Ω。     

Facile catalyzed acylation of alcohols, phenols, amines and thiols based on ZrOCl2·8H2O and acetyl chloride in solution and in solvent-free conditions

Acylation of heteroatoms (O, N and S) with acetyl chloride based on the use of a catalytic amount of the moisture stable, inexpensive ZrOCl₂·8H₂O, proceeds efficiently producing the corresponding acylated products in excellent yields.     

Thermal decomposition mechanisms of MgCl2·6H2O and MgCl2·H2O

The thermal decomposition mechanisms and the intermediate morphology of MgCl₂·6H₂O and MgCl₂·H₂O were studied using integrated thermal analysis, X-ray diffraction, scanning electron microscope and chemical analysis. The results showed that there were six steps in the thermal decomposition of MgCl₂·6H₂O: producing MgCl₂·4H₂O at 69 °C, MgCl₂·2H₂O at 129 °C, MgCl₂·nH₂O (1 ≤ n ≤ 2) and MgOHCl at 167 °C, the conversion of MgCl₂·nH₂O (1 ≤ n ≤ 2) to Mg(OH)Cl·0.3H₂O by simultaneous dehydration and hydrolysis at 203 °C, the dehydration of Mg(OH)Cl·0.3H₂O to MgOHCl at 235 °C, and finally the direct conversion of MgOHCl to the cylindrical particles of MgO at 415 °C. To restrain the sample hydrolysis and to obtain MgCl₂·H₂O, MgCl₂·6H₂O was first calcined in HCl atmosphere until 203 °C when MgCl₂·H₂O was obtained; HCl gas was then turned off and the calcination process continued, producing Mg₃Cl₂(OH)₄·2H₂O calcined at 203 °C, Mg₃(OH)₄Cl₂ at 220 °C and MgO at 360 °C. The temperature of producing MgO from calcination of MgCl₂·H₂O was lower (360 °C) than that from MgCl₂·6H₂O (415 °C) because of its more reactive intermediate products: the irregular shape and tiny needle-like Mg₃Cl₂(OH)₄·2H₂O particles and the uneven surface porous Mg₃(OH)₄Cl₂ particles. The MgO particles obtained at 360 °C had a flake structure.     

Ho(NO3)3(C2H5O2N)4·H2O的低温热容和热力学函数

合成了稀土(钬, Ho)-氨基酸(甘氨酸, C₂H₅O₂N)二元配合物Ho(NO₃)₃(C₂H₅O₂N)₄·H₂O, 并且通过化学分析、元素分析和红外(IR)光谱对配合物进行了表征. 用高精度全自动绝热量热仪, 测定了该配合物在80-390 K温度区间的定压摩尔热容(C_p,m). 利用实验测定的热容数据, 采用最小二乘法, 将热容曲线上热容峰以外的两段平滑区的摩尔热容对折合温度进行拟合, 建立了热容随折合温度变化的多项式方程. 根据热容与焓、熵的热力学关系,计算出了配合物在80-390 K温度区间内,每隔5 K,相对于298.15 K的摩尔热力学函数(H_T,m-H_298.15,m)和(S_T,m-S_298.15,m). 通过热容曲线分析, 计算出了350 K附近转变过程的焓变(Δ_trsH_m)和熵变(Δ_trsS_m). 用差示扫描量热法(DSC)测定了配合物的热稳定性.     

Transition metal tetramolybdate dihydrates MMo4O13·2H2O (M=Co,Ni) having a novel pillared layer structure

Hydrothermal synthesis in the M/Mo/O (M=Co,Ni) system was investigated. Novel transition metal tetramolybdate dihydrates MMo₄O₁₃·2H₂O (M=Co,Ni), having an interesting pillared layer structure, were found. The molybdates crystallize in the triclinic system with space group P−1, Z=1 with unit cell parameters of a=5.525(3) Å, b=7.058(4) Å, c=7.551(5) Å, α=90.019(10)°, β=105.230(10)°, γ=90.286(10)° for CoMo₄O₁₃·2H₂O, and a=5.508(2) Å, b=7.017(3) Å, c=7.533(3) Å, α=90.152(6)°, β=105.216(6)°, γ=90.161(6)° for NiMo₄O₁₃·2H₂O The structure is composed of two-dimensional molybdenum-oxide (2D Mo-O) sheets pillared with CoO₆ octahedra. The 2D Mo-O sheet is made up of infinite straight ribbons built up by corner-sharing of four molybdenum octahedra (two MoO₆ and two MoO₅OH₂) sharing edges. These infinite ribbons are similar to the straight ones in triclinic-K₂Mo₄O₁₃ having 1D chain structure, but are linked one after another by corner-sharing to form a 2D sheet structure, like the twisted ribbons in BaMo₄O₁₃·2H₂O (or in orthorhombic-K₂Mo₄O₁₃) are.     

On the correct spin lattice for the spin-gapped magnetic solid NH4CuPO4·H2O

NH₄CuPO₄·H₂O is a spin-gapped compound that has been described in terms of an isolated antiferromagnetic spin dimer model. To explore the origin of this spin gap, we examined the spin exchange interactions of NH₄CuPO₄·H₂O by performing qualitative spin dimer analysis based on extended Hückel tight binding calculations and also by carrying out quantitative mapping analysis based on first principles density functional theory electronic band structure calculations. Our study indicates that, to a first approximation, the magnetic properties of NH₄CuPO₄·H₂O should be described by an antiferromagnetic and ferromagnetic alternating chain.     

配位化合物Zn(Met)3(NO3)2·H2O(s)(Met=L-α-蛋氨酸)的低温热容及标准摩尔生成焓

利用精密绝热热量仪测定了化合物配合物Zn(Met)₃(NO₃)₂·H₂O (s) (Met=L-α-蛋氨酸)在78-371 K温区的摩尔热容. 通过热容曲线解析, 得到了该配合物的起始脱水温度为T_D=325.10 K. 将该温区的摩尔热容实验值用最小二乘法拟合得到了摩尔热容(C_p)对约化温度(T)的多项式方程, 由此计算得到了配合物的舒平热容值和热力学函数值. 基于设计的热化学循环, 选择100 mL of 2 mol·L^-1 HCl为量热溶剂, 利用等温环境溶解-反应热量计, 得到了298.15 K配合物的标准摩尔生成焓为Δ_fH_m⁰[Zn(Met)₃(NO₃)₂·H₂O(s),s]=-(1472.65±0.76) J·mol^-1.