Neutron diffraction study of phase transitions in perovskite-type strontium molybdate SrMoO3

The structure of a polycrystalline sample of SrMoO₃ has been investigated using powder neutron diffraction from 5 to 300 K, to reveal two structural phase transitions, the first from the cubic structure with a=3.97629(3) Å to a tetragonal structure in I4/mcm near 266 K and the second to an orthorhombic Imma phase below 125 K. The average Mo-O distance is essentially independent of temperature. The temperature dependence of the octahedral tilting appears typical of a tricritical phase transition.     

Structural transformation and oxidation of Sr2MnO3.5+x determined by in-situ neutron powder diffraction

The oxidation of the n = 1 Ruddlesden-Popper phase, Sr₂MnO_3.5+x, where 0 ≤ x ≤ 0.5 has been investigated using a combination of in-situ diffraction techniques. In agreement with previous reports the room temperature structure of Sr₂MnO_3.5+x was determined to be monoclinic crystallising in space group P2₁/c. On heating in air the material undergoes rapid oxidation at a relatively modest temperature, ∼275 °C. The oxidation process is coincident with a significant change in the structure, with the material now adopting a tetragonal I4/mmm structure. In the oxygen deficient phase where x > 0 the Mn coordination is square pyramidal, with a sixth partially occupied oxygen position giving rise to octahedral coordination. Oxidation of Sr₂MnO_3.5+x results in the filling of the partially occupied O4 positions and a resulting increase in symmetry, with the Mn coordination now adopting solely a distorted octahedral environment.     

In-situ investigations of the curing of a polyester resin

Quasi-isothermal curing of a polyester resin was studied at different catalyst concentrations and temperatures in-situ by ¹H-NMR relaxometry and NIR spectroscopy simultaneously. Sample and probe temperatures were also recorded. An autocatalytic kinetic model, optionally including a diffusion term, was successfully applied to describe and predict the curing kinetics of the polyester resin as a function of temperature and catalyst concentration, although the diffusion effect is relatively weak in the investigated system under the experimental conditions. The corresponding kinetic coefficients and the reaction activation energy were obtained by fitting the models to the data, assuming an Arrhenius relation.     

Transmission electron microscopy study of Ruddlesden-Popper Can+1MnnO3n+1n=2 and 3 compounds

Two Ruddlesden-Popper compounds Ca_n+1Mn_nO_3n+1 with n=2 and 3 synthesized by a citrate gel technique have been studied by TEM. The structure of Ca₄Mn₃O₁₀ is consistent with the previously determined structure having the space group Pbca and a⁻ a⁻ c⁺/a⁻ a⁻ c⁺ tilt system. The presence of defects suggests the possible high-temperature phase transition from untilted I4/mmm to Pbca. The structure of Ca₃Mn₂O₇ was found to be different from the previously suggested I4/mmm symmetry. Ca₃Mn₂O₇ forms with an orthorhombic structure with either Cmcm or Cmc2₁ space group. A structural model for Cmc2₁ based on the tilting of almost-rigid octahedra with a⁺ c⁻ c⁻/a⁺ c⁻ c⁻ tilt system is proposed. The lamellar defects were shown to be twin variants of the Cmc2₁ structure with the (001)_t interfaces, which suggests the possible tilting phase transition from the ideal I4/mmm to Cmc2₁ following the maximal group-subgroup symmetry tree: I4/mmm→Fmmm→Bbmm(Cmcm)→Bb2₁m(Cmc2₁).     

Synthesis of 3,4-dihydropyrimidin-2(1H)-ones and 1,4-dihydropyridines using ammonium carbonate in water

Various known and new 3,4-dihydropyrimidin-2(1H)-ones and 1,4-dihydropyridines are prepared efficiently via Biginelli and Hantzsch reactions using ammonium carbonate in water. Competition between Biginelli and Hantzsch reactions is observed with pyridine carbaldehydes. Using this methodology, Hantzsch esters are synthesized in higher yields and purities than with other procedures without the use of a catalyst or an organic solvent.     

X-ray structural study of intermetallic alloys RT2Si and RTSi2 (R=rare earth, T=noble metal)

Two series of intermetallic alloys, RT₂Si and RTSi₂, have been synthesized from stoichiometric compositions. The crystal structures of EuPt_1+xSi_2−x (CeNiSi₂-type), CeIr₂Si (new structure type), YbPd₂Si and YbPt₂Si (both YPd₂Si-type) have been elucidated from X-ray single crystal CCD data, which were confirmed by XPD experiments. The crystal structures of LaRh₂Si and LaIr₂Si (CeIr₂Si-type), {La,Ce,Pr,Nd}AgSi₂ (all TbFeSi₂-type), and EuPt₂Si (inverse CeNiSi₂-type) were characterized by XPD data. RT₂Si/RTSi₂ compounds were neither detected in as-cast alloys Sc₂₅Pt₅₀Si₂₅, Eu₂₅Os₂₅Si₅₀ and Eu₂₅Rh₂₅Si₅₀ nor after annealing at 900 °C. Instead, X-ray single crystal data prompted Eu₂Os₃Si₅ (Sc₂Fe₃Si₅-type) and EuRh_2+xSi_2−x (x=0.04, ThCr₂Si₂-type) as well as a new structure type for Sc₂Pt₃Si₂ (own type).     

Synthesis and electrical conductivity of perovskite-type PrCo1−xMgxO3

Oxides in the system PrCo_1−xMg_xO₃ (x=0.0, 0.05, 0.10, 0.15, 0.20, 0.25) were synthesized by citrate technique and characterized by powder X-ray diffraction and scanning electron microscope. All compounds have a cubic perovskite structure (space group ). The maximum ratio of doped Mg in the system PrCo_1−xMg_xO₃ is x=0.2. Further doping leads to the segregation of Pr₆O₁₁ in PrCo_1−xMg_xO₃. The substitution of Mg for Co improves the performance of PrCoO₃ as compared to the electrical conductivity measured by a four-probe electrical conductivity analyzer in the temperature range from 298 to 1073 K. The substitution of Mg for Co on the B site may be compensated by the formations of Co⁴⁺ and oxygen vacancies. The electrical conductivity of PrCo_1−xMg_xO₃ oxides increases with increasing x in the range of 0.0-0.2. The increase in conductivity becomes considerable at the temperatures ?673 K especially for x?0.1; it reaches a maximum at x=0.2 and 1073 K. From x>0.2 the conductivity of PrCo_1−xMg_xO₃ starts getting lower. This is probably a result of the segregation of Pr₆O₁₁ in PrCo_1−xMg_xO₃ , which blocks oxygen transport, and association of oxygen vacancies. A change in activation energy for all PrCo_1−xMg_xO₃ compounds (x=0-0.25) was observed, with a higher activation energy above 573 K and a lower activation energy below 573 K. The reasons for such a change are probably due to the change of dominant charge carriers from Co⁴⁺ to Vö in PrCo_1−xMg_xO₃ oxides and a phase transition mainly starting at 573 K.     

High-pressure single-crystal X-ray diffraction of Tl2SeO4

The effect of pressure on the crystal structure of thallium selenate (Tl₂SeO₄) (Pmcn, Z=4), containing the Tl⁺ cations with electron lone pairs, has been studied with single-crystal X-ray diffraction in a diamond anvil cell up to 3.64 GPa at room temperature. No phase transition has been observed. The compressibility data are fitted by a Murnaghan equation of state with the zero-pressure bulk modulus B₀=29(1) GPa and the unit-cell volume at ambient pressure V₀=529.6(8) Å³ (B′=4.00). Tl₂SeO₄ is the least compressible in the c direction, while the pressure-induced changes of the a and b lattice parameters are quite similar. These observations can be explained by different pressure effects on the nine- and 11-fold coordination polyhedra around the two non-equivalent Tl atoms. The SeO₄²⁻ tetrahedra are not rigid units and become more distorted. Their contribution to the compressibility is small. The effect of pressure on the isotypical oxide materials A₂TO₄ with the β-K₂SO₄ structure is discussed. It appears that the presence of electron lone pairs on the Tl⁺ cation does not seem to influence the compressibility of Tl₂SeO₄.     

Binding Characteristics of CoPc/SnO2 by In-situ Process and Photocatalytic Activity under Visible Light Irradiation

Cobalt phthalocyanine (CoPc) was synthesized and self-assembled on the surface of nanoscale tin dioxide (SnO₂) by in-situ process, marked as i, and Co-O interaction was verified to conjugate axially between macromolecule (CoPc) and SnO₂ in CoPc/SnO₂(i). The results indicated that the binding constant of CoPc/SnO₂(i) was two-order higher than that of CoPc/SnO₂(d) synthesized by dipping process, marked as d, while the numbers of binding sites were comparable in both samples. The degradation rate in the photocatalytic activity of CoPc/SnO₂(i) was 32.5% higher than that of CoPc/SnO₂(d) under visible-light irradiation for 150 min due to the effective electron separation and energy injection from LUMO of CoPc to conduction band of SnO₂ for CoPc/SnO₂(i) based on the strong interaction between CoPc and SnO₂. The degradation recyclability of CoPc/SnO₂(i) retained 48.8% in 10 times under the same circular photocatalytic process.     

X-ray and neutron powder diffraction studies of Ba(NdxY2−x)CuO5

Ba(R,R′)₂CuO₅ (R,R′=lanthanides and Y) plays an important role as a flux-pinning agent in enhancing the superconducting properties of the Ba₂(R,R′)Cu₃O_6+x (R,R′=lanthanides and Y) coated conductors. Using X-ray diffraction and neutron diffraction, we found that the Ba(Nd_xY_2−x)CuO₅ solid solution adopts two structure types. In the Nd-rich region (1.8?x?2.0), the materials are of brown color (commonly referred to as the ‘brown phase’), and the structure is tetragonal with space group I4/mbm (no. 127). In the Y-rich region (0.0?x?1.4), the materials are green (commonly referred to as the ‘green phase’) and the structure is orthorhombic with space group Pnma (no. 62). A two-phase region (1.4<x<1.8) exists between the orthorhombic and tetragonal phases. The crystal chemistry and crystallography of the orthorhombic ‘green phase’ series, Ba(Nd_xY_2−x)CuO₅ (isostructural to BaY₂CuO₅), are discussed in this paper.     

Neutron powder diffraction study of A2BeF4 (A=K, Rb, Cs): Structure refinement and analysis of background

The crystal structure of potassium, rubidium and caesium fluoroberyllates have been re-examined by neutron powder diffraction at room temperature and at 1.5 K. Previously, their structures, obtained from X-ray data, were described in the Pn2₁a space group. However, the results obtained from Rietveld refinements, using powder neutron diffraction, at both temperatures, indicated that all structures are orthorhombic with space group Pnma. The known phase transition at high temperature is probably related to the appearance of a hexagonal pseudo-symmetry instead of the elimination of the mirror plane between the above mentioned orthorhombic space groups. A possible phase transition, at very low temperature, was discarded considering the stereochemical criteria concerning the structural stability of A₂BX₄ compounds. This was confirmed by thermal analysis. On the other hand, a modulated background has been detected in all samples during the refinements. This is compatible with the presence of an amorphous phase, coexisting with the crystalline phase, or with a disordered component within the main crystalline phase. Instead of using a polynomial function, the background was modelled by Fourier filtering improving the fit for all patterns. The radial distribution function (RDF) was obtained from the analysis of the calculated background and compared with the RDF from the average crystal structure. The advantages of neutron with respect to X-ray diffraction were evidenced for this type of compound with β-K₂SO₄-type structure.     

Composition-induced structural phase transitions in the (Ba1−xLax)2In2O5+x (0?x?0.6) system

Composition-induced structural phase changes across the high temperature, fast oxide ion conducting (Ba_1−xLa_x)₂In₂O_5+x, 0?x?0.6, system have been carefully analysed using hard mode infrared (IR) powder absorption spectroscopy, X-ray powder diffraction and electron diffraction. An orthorhombic brownmillerite to three-dimensionally disordered cubic perovskite phase transition in this system is signalled by a drastic change in slope of both wavenumber and average line widths of IR spectra as a function of composition. Some evidence is found for the existence of an intermediate tetragonal phase (previously reported to exist from electron diffraction data) around x∼0.2. The new spectroscopic data have been used to compare microscopic and macroscopic strain parameters arising from variation in composition. The strain and spectroscopic data are consistent with first-order character for the tetragonal→orthorhombic transition, while the cubic→tetragonal transition could be continuous. Differences between the variation with composition of spectral parameters and of macroscopic strain parameters are consistent with a substantial order/disorder component for the transitions. There is also evidence for precursor effects within the cubic structure before symmetry is broken.     

Crystal structures of RPt3−xSi1−y(R=Y, Tb, Dy, Ho, Er, Tm, Yb) studied by single crystal X-ray diffraction

The crystal structures of ternary compounds RPt_3−xSi_1−y(R=Y, Tb, Dy, Ho, Er, Tm, Yb) have been elucidated from X-ray single crystal CCD data. All compounds are isotypic and crystallize in the tetragonal space group P4/mbm. The general formula RPt_3−xSi_1−y arises from defects: x≈0.20, y≈0.14. The crystal structure of RPt_3−xSi_1−y can be considered as a packing of four types of building blocks which derive from the CePt₃B-type unit cell by various degrees of distortion and Pt, Si-defects.     

Synthesis and characterization of n=5, 6 members of the La4Srn−4TinO3n+2 series with layered structure based upon perovskite

Layered compounds have been synthesized and structurally characterized for the n=5 and 6 members of the perovskite-related family La₄Sr_n−4Ti_nO_3n+2 by combining X-ray diffraction and transmission electron microscopy. Their structure can be regarded as comprising [(La,Sr)₅Ti₅O₁₇] and [(La,Sr)₆Ti₆O₂₀] perovskite blocks joined by crystallographic shears along the a-axis, with consecutive blocks shifted by 1/2 [100]_p. The n=5 member is similar to the previously reported n=5 member of other A_nB_nO_3n+2-related series. The n=6 member, which has only been briefly reported in other systems previously, is also a well-behaved member of this A_nB_nO_3n+2 series.     

Neutron diffraction and X-ray absorption study of Ag5Pb2O6

Neutron diffraction and X-ray absorption measurements were carried out for a silver-lead oxide Ag₅Pb₂O₆. The powder neutron diffraction patterns could be fitted to the trigonal structure, as was found by X-ray diffraction. From the bond-valence-sum (BVS) analysis, the valences of the Ag and Pb ions were estimated to be about 1+ and 3.7+, respectively. The X-ray absorption measurements indicated that the ionic state of Ag is close to 1+, while that of Pb stands between 3+ and 4+. The deviation of the valence of the Pb ion from 4+ suggests a contribution of Pb orbitals to the metallic conduction as well as the possible superconductivity of this material, consistently with a recent band-structure calculation.     

The La0.95Ni0.6Fe0.4O3-CeO2 system: Phase equilibria, crystal structure of components and transport properties

Phase equilibria, crystal structure, and transport properties in the (100−x) La_0.95Ni_0.6Fe_0.4O₃-xCeO₂ (LNFCx) system (x=2-75 mol%) were studied in air. Evolution of phase compositions and crystal structure of components was observed. The LNFCx (2≤x≤10) are three-phase and comprise the perovskite phase with rhombohedral symmetry (R3?c), the modified ceria with fluorite structure (Fm3?m), and NiO as a secondary phase. These multiphase compositions exhibit metallic-like conductivity above 300 °C. Their conductivity gradually decreases from 395.6 to 260.6 S/cm, whereas the activation energy remains the same (E_a=0.04-0.05 eV), implying the decrease in the concentration of charge carriers. Phase compositions in the LNFCx (25≤x≤75) are more complicated. A change from semiconducting to metallic-like conductivity behavior was observed in LNFC25 at about 550 °C. The conductivity of LNFCx (25≤x≤75) could be explained in terms of a modified simple mixture model.     

Pressure-induced structural transformations in lanthanide titanates: La2TiO5 and Nd2TiO5

The structure of orthorhombic rare earth titanates of La₂TiO₅ and Nd₂TiO₅, where Ti cations are in five-fold coordination with oxygen, has been studied at high pressures by X-ray diffraction (XRD), Raman scattering measurements, and quantum mechanical calculations. Both XRD and Raman results indicated two pressure-induced phase transitions during the process. An orthorhombic super cell (a×b×2c) formed at a pressure between 6 and 10 GPa, and then transformed to a hexagonal high-pressure phase accompanied by partial decomposition. The hexagonal high-pressure phase is quenchable. Detailed structural analysis indicated that the five-coordinated TiO₅ polyhedra remain during the formation of super cell, but the orthorhombic-to-hexagonal phase transition at high pressures is a reconstructive process, and the five-fold Ti-O coordination increased to more than 6. This phase transition sequence was verified by quantum mechanical calculations.     

Phase transitions in A-site substituted perovskite compounds: The (Ca1-2xNaxLax)TiO3 (0?x?0.5) solid solution

The (Ca_1-2xNa_xLa_x)TiO₃ (0?x?0.5) A-site substituted perovskite compounds have been synthesized and characterized by XRD and Raman spectroscopy at room temperature. The XRD powder diffraction study suggests that the end-member Na_1/2La_1/2TiO₃ crystallizes in the tetragonal space group I4/mcm. The phase transition from Pbnm to I4/mcm is located between x=0.34 and 0.39 and is driven by the variation of ionic radii at the A-site. The observed Raman modes are in agreement with group theory analysis, and the relationships between the behavior of structural parameters (e.g. Ti-O-Ti bond angle), indicated by long-range order, and the corresponding Raman frequency shifts and intensity evolution, indicated by short-range order, are established and discussed in terms of the radius effect and the mass effect.     

X-ray diffraction study on phase transition of orthorhombic LiMnO2 in electrochemical conversions

Orthorhombic LiMnO₂ was synthesized by hydrothermal reaction. Phase transition during electrochemical process has been investigated using the high-resolution X-ray diffraction. Contrary to numerous earlier reports, phase analysis of the orthorhombic LiMnO₂ electrode cycled for three times evidences the irreversible structure transition from orthorhombic LiMnO₂ (Pmnm) to spinel LiMn₂O₄ (Fd3m) and rock salt Li_0.5Mn_0.5O (Fm \( \overline{3} \) m). Here, the spinel structure with a cell parameter a?=?8.241 (1) Å has a large cationic disorder on lithium and manganese sites, i.e., about 9% of the Li positions are occupied by Mn and vice versa. For Li_0.5Mn_0.5O, the cell parameter is a?=?4.121 (3) Å, and both Li⁺ and Mn³⁺ cations occupy the octahedral 4a sites with mole ratio 1:1. The quantity of Li_0.5Mn_0.5O phase is greatly dependent on cycling rate, namely, the higher the current density is, the larger the quantity of formed-rock salt structure is.     

A combined temperature-dependent electron and single-crystal X-ray diffraction study of the fresnoite compound Rb2VV2O8

High-purity Rb₂V₃O₈ has been grown and temperature-dependent electron and single-crystal X-ray diffraction used to carefully investigate its fresnoite-type reciprocal lattice. In contrast to other recently investigated representatives of the fresnoite family of compounds, Rb₂V₃O₈ is not incommensurately modulated with an incommensurate basal plane primary modulation wave vector given by q∼0.3 〈110〉^*. A careful low-temperature electron diffraction study has, however, revealed the existence of weak incommensurate satellite reflections characterized by the primitive primary modulation wave vector q₁∼0.16c^*. The reciprocal space positioning of these incommensurate satellite reflections, the overall (3+1)-d superspace group symmetry, as well as the shapes of the refined displacement ellipsoids determined from single-crystal XRD refinement, are all consistent with their arising from a distinct type of condensed rigid unit modes (RUMs) of distortion of the Rb₂V₃O₈ parent structure.