Preparation of ZnO/GO composite material with highly photocatalytic performance via an improved two-step method

ZnO/graphene oxide(ZnO/GO) composite material,in which ZnO nanoparticles were densely coated on the GO nanosheets,was successfully prepared by an improved two-step method and characterized by IR, XRD,TEM,and UV-vis techniques.The improved photocatalytic property of the ZnO/GO composite material,evaluated by the photocatalytic degradation of methyl orange(MO) under UV irradiation,is ascribed to the intimate contact between ZnO and GO,the enhanced adsorption of MO,the quick electron transfer from excited ZnO particles to GO sheets and the activation of MO molecules viaπ-πinteraction between MO and GO.     

ZnO/graphene-oxide nanocomposite with remarkably enhanced visible-light-driven photocatalytic performance

In this work, a high-performance photocatalyst of ZnO/graphene-oxide (ZnO/GO) nanocomposite was synthesized via a facile chemical deposition route and used for the photodegradation of organic dye from water under visible light. The nanocomposite was characterized by X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy, transmission electron microscopy, Brunauer-Emmett-Teller N(2) adsorption-desorption analysis, and UV-Vis diffusion reflectance spectroscopy. The ZnO/GO nanocomposite consisting of flower-like ZnO nanoparticles anchored on graphene-oxide sheets has a high surface area and hierarchical porosity, which is benefit to the adsorption and mass transfer of dye and oxygen species. For the photodegradation of organic dyes under visible light, ZnO/GO nanocomposite exhibited remarkably enhanced photocatalytic efficiency than graphene-oxide sheets and flower-like ZnO particles. Moreover, the photocatalytic efficiency of ZnO/GO nanocomposite could be further improved by annealing the product in N(2) atmosphere. The outstanding photocatalytic performance was ascribed to the efficient photosensitized electron injection and repressed charge carriers recombination in the composite with GO as electron collector and transporter, thus leading to continuous generation of reactive oxygen species for the degradation of methylene blue.     

Broad spectrum antibacterial zinc oxide-reduced graphene oxide nanocomposite for water depollution

Antimicrobial-resistance (AMR) is a global health challenge arising from the evolution of bacteria, viruses, fungi, and parasites, such that pathogenic microorganisms no longer respond to classical therapies. AMR and the rise of so-called ‘superbugs’ requires innovative nanomaterials and biostatic strategies. Here we report a broad spectrum, antimicrobial nanomaterial integrating light-responsive ZnO nanoparticles (NP) and reduced graphene oxide (rGO) into a heterojunction semiconductor nanocomposite for water depollution. Simultaneous chemical reduction of Zn sulphate and GO sheets yields a low concentration (0.5 mol%) of 10 nm ZnO nanoparticles decorating fragmented rGO nanosheets, with a total surface area of 12 m²/g and optical band gap of 1.6 eV. Antimicrobial performance of the ZnO-rGO nanocomposite was evaluated against methicillin-resistant Staphylococcus aureus (MRSA), Escherichia coli 0157:H7 and Salmonella typhimurium bacteria, which are prevalent in contaminated aquatic systems; antimicrobial efficacy against these organisms was 96%, 97%, and 73%, respectively, for a loading of 2 mg/mL, evidencing a strong synergy compared with pure ZnO or rGO components. ZnO-rGO was also an effective photocatalyst for the aqueous degradation of Malachite Green dye, suggesting that its mode of antibacterial action reflects the production of reactive oxygen species under ambient illumination.     

Green synthesis of graphene nanosheets/ZnO composites and electrochemical properties

A green and facile approach was demonstrated to prepare graphene nanosheets/ZnO (GNS/ZnO) composites for supercapacitor materials. Glucose, as a reducing agent, and exfoliated graphite oxide (GO), as precursor, were used to synthesize GNS, then ZnO directly grew onto conducting graphene nanosheets as electrode materials. The small ZnO particles successfully anchored onto graphene sheets as spacers to keep the neighboring sheets separate. The electrochemical performances of these electrodes were analyzed by cyclic voltammetry, electrochemical impedance spectrometry and chronopotentiometry. Results showed that the GNS/ZnO composites displayed superior capacitive performance with large capacitance (62.2 F/g), excellent cyclic performance, and maximum power density (8.1 kW/kg) as compared with pure graphene electrodes. Our investigation highlight the importance of anchoring of small ZnO particles on graphene sheets for maximum utilization of electrochemically active ZnO and graphene for energy storage application in supercapacitors.     

Removal of Mn(II) from Acidic Wastewaters Using Graphene Oxide–ZnO Nanocomposites

Pollution due to acidic and metal-enriched waters affects the quality of surface and groundwater resources, limiting their uses for various purposes. Particularly, manganese pollution has attracted attention due to its impact on human health and its negative effects on ecosystems. Applications of nanomaterials such as graphene oxide (GO) have emerged as potential candidates for removing complex contaminants. In this study, we present the preliminary results of the removal of Mn(II) ions from acidic waters by using GO functionalized with zinc oxide nanoparticles (ZnO). Batch adsorption experiments were performed under two different acidity conditions (pH1 = 5.0 and pH2 = 4.0), in order to evaluate the impact of acid pH on the adsorption capacity. We observed that the adsorption of Mn(II) was independent of the pH_PZC value of the nanoadsorbents. The qmax with GO/ZnO nanocomposites was 5.6 mg/g (34.1% removal) at pH = 5.0, while with more acidic conditions (pH = 4.0) it reached 12.6 mg/g (61.2% removal). In turn, the results show that GO/ZnO nanocomposites were more efficient to remove Mn(II) compared with non-functionalized GO under the pH2 condition (pH2 = 4.0). Both Langmuir and Freundlich models fit well with the adsorption process, suggesting that both mechanisms are involved in the removal of Mn(II) with GO and GO/ZnO nanocomposites. Furthermore, adsorption isotherms were efficiently modeled with the pseudo-second-order kinetic model. These results indicate that the removal of Mn(II) by GO/ZnO is strongly influenced by the pH of the solution, and the decoration with ZnO significantly increases the adsorption capacity of Mn(II) ions. These findings can provide valuable information for optimizing the design and configuration of wastewater treatment technologies based on GO nanomaterials for the removal of Mn(II) from natural and industrial waters.     

Preparation of silver/graphene/polymer hybrid microspheres and the study of photocatalytic degradation

Three-dimensional silver/graphene/polymer hybrid microspheres were prepared to depress the aggregation of two-dimensional graphene. Graphene oxide (GO) sheets were successfully wrapped on the surface of amine-functionalized polystyrene-poly (glycidyl methacrylate) (PS-PGMA) microspheres (～3 μm in diameter) to form graphene oxide/amino-microsphere (GO/AMS) core–shell structure. Subsequently, the wrapped GO sheets were reduced by using hydrazine hydrate as the reducing agents, meanwhile decorated with silver nanoparticles on the wrinkled surface to form Ag-rGO/AMS hybrid microspheres with monodisperse distributions in shape and diameter. The resulting materials were characterized by power X-ray diffraction, scanning electron microscope, Raman spectra, and ultraviolet–visible (UV–vis) absorption spectra. Since Ag nanoparticles behave surface plasmon resonance effect and rGO structure can improve the separation of photogenerated electrons and holes, the Ag-rGO/AMS composites present good photocatalytic activities for the degradation of methylene blue (MB) as 93 % MB were degraded after 2.5 h under irradiation.     

Acetone‐Induced Graphene Oxide Film Formation at the Water–Air Interface

Graphene oxide (GO) is an amphiphilic soft material, which can accumulate at the water–air interface. However, GO sheets diffuse slowly in the aqueous phase because of their large size. It is still challenging to form high quality GO films in a controllable and simple way. In this study, we showed that GO sheets can quickly migrate to the water–air interface and form thin films when a suitable amount of acetone is directly mixed with a GO aqueous dispersion. The film formation rate and surface coverage of GO sheets depend on the volume of acetone added, GO dispersion concentration, and formation time. Among several organic solvents, acetone has its advantage for GO film formation owing to its three properties: a nonsolvent to GO aqueous dispersions, miscible with a GO aqueous dispersion, and fast evaporation. Furthermore, we have found that the film formation also is governed by the size of GO sheets and their oxygen content. Although smaller GO sheets could migrate to the water–air interface faster, the overlapping of small GO sheets and the increase in contact resistance is not desirable. A higher oxygen content in GO sheets could also result in smaller GO sheets. Multilayer GO films can be obtained through layer‐by‐layer dip‐coating. These findings open opportunities in developing simple scalable GO film fabrication processes.     

一步微波法制备石墨烯-硫化镉纳米复合材料

石墨烯-硫化镉量子点纳米复合材料在光电领域具有广阔的应用前景,而其性能依赖于良好的硫化镉纳米颗粒均匀地分布在单片石墨烯片上。为此,我们发展了一种简便的一步制备高质量石墨烯-硫化镉纳米复合材料的方法。该方法以氧化石墨烯为原料,二水乙酸镉作为镉源,硫代乙酰胺作为硫源,通过微波加热处理数分钟直接制得石墨烯-硫化镉纳米复合材料。电镜照片显示获得的石墨烯-硫化镉纳米复合材料中硫化镉纳米粒子均匀生长在石墨烯表面,无明显聚集产生。以氧化石墨烯为起始原料一步合成保证了最终纳米复合材料中石墨烯主要以单片形式存在,而在微波加热合成过程中,氧化石墨烯也同时还原成石墨烯。     

Gold nanostar-enhanced surface plasmon resonance biosensor based on carboxyl-functionalized graphene oxide

A new high-sensitivity surface plasmon resonance (SPR) biosensor based on biofunctional gold nanostars (AuNSs) and carboxyl-functionalized graphene oxide (cGO) sheets was described. Compared with spherical gold nanoparticles (AuNPs), the anisotropic structure of AuNSs, which concentrates the electric charge density on its sharp tips, could enhance the local electromagnetic field and the electronic coupling effect significantly. cGO was obtained by a diazonium reaction of graphene oxide (GO) with 4-aminobenzoic acid. Compared with GO, cGO could immobilize more antibodies due to the abundant carboxylic groups on its surface. Testing results show that there are fairly large improvements in the analytical performance of the SPR biosensor using cGO/AuNSs-antigen conjugate, and the detection limit of the proposed biosensor is 0.0375 μg mL⁻¹, which is 32 times lower than that of graphene oxide-based biosensor.     

Preparation of Nanoscrolls by Rolling up Graphene Oxide–Polydopamine–Au Sheets using Lyophilization Method

Graphene oxide–polydopamine–Au (GO–PDA–Au) nanoscrolls were prepared by rolling up GO–PDA–Au sheets through a simple lyophilization method. The structure of GO–PDA–Au nanoscrolls and GO–PDA–Au sheets were compared by powder X‐ray diffraction, Raman spectra, transmission electron microscopy, and scanning electron microscopy. The results demonstrated that the heterogeneous GO–PDA–Au nanoscrolls were synthesized successfully. Polydopamine (PDA) attached at the surface of GO sheets served as binding reagents to anchor and disperse Au nanoparticles (NPs). The electrocatalytic activity of methanol with GO–PDA–Au nanoscrolls and GO–PDA–Au sheets as electrodes were conducted. Compared to GO–PDA–Au sheets, GO–PDA–Au nanoscrolls showed better electrocatalytic activity and electrochemical stability owing to their scrolled structure. This article provides a simple and effective method to prepare GO nanoscrolls containing metal NPs that broadens the applications of the graphene‐based materials in optical, magnetic, and catalytic fields.     

Fabrication of nitrogen-enriched graphene oxide/Cu NPs as a highly efficient and recyclable heterogeneous nanocatalyst for the Chan–Lam cross-coupling reaction

Herein, we demonstrate the direct polymerization of melamine and cyanuric chloride in the surface of graphene oxide (GO) (N-enriched GO) in order to develop a new nanocatalyst. The supramolecular polymerized GO acts not only as a spacer to prevent the restacking of graphene sheets but also as a nitrogen source to generate active centers for Cu NP attachments. Subsequently, the nitrogen on the surface of the GO sheets coordinates with copper ions to generate copper nanoparticles. The prepared nanocatalyst was characterized by Fourier transform infrared spectroscopy, X-ray powder diffraction, scanning electron microscopy, energy-dispersive X-ray spectroscopy and thermogravimetric analysis. This catalyst showed high efficiency and good activity in the Chan–Lam cross-coupling reaction of N-heterocycles and aniline derivatives with high yields in short reaction times. In addition, the nanocatalyst was easily recovered and reused for five consecutive runs without any noticeable loss of performance.     

Functional Graphene by Thiol‐ene Click Chemistry

Thiol‐ene click reaction was successfully employed for chemical modification of graphene oxide (GO) by one‐step synthesis. Herein, 2,2‐azobis(2‐methylpropionitrile) (AIBN) was used as thermal catalyst and cysteamine hydrochloride (HS?(CH₂)₂?NH₂HCl) was used as thiol‐containing compound, which is incorporated to GO surface upon reaction with the C=C bonds. The hydrochloride acts as protecting group for the amine, which is finally eliminated by adding sodium hydroxide. The modified GO contains both S‐ and N‐containing groups (NS‐GO). We found that NS‐GO sheets form good dispersion in water, ethanol, and ethylene glycol. These graphene dispersions can be processed into functionalized graphene film. Besides, it was demonstrated that NS‐GO was proved to be an excellent host matrix for platinum nanoparticles. The developed method paves a new way for graphene modification and its functional nanocomposites.     

Self‐Construction from 2D to 3D: One‐Pot Layer‐by‐Layer Assembly of Graphene Oxide Sheets Held Together by Coordination Polymers

Deposition of Ni‐based cyanide bridged coordination polymer (NiCNNi) flakes onto the surfaces of graphene oxide (GO) sheets, which allows precise control of the resulting lamellar nanoarchitecture by in situ crystallization, is reported. GO sheets are utilized as nucleation sites that promote the optimized crystal growth of NiCNNi flakes. The NiCNNi‐coated GO sheets then self‐assemble and are stabilized as ordered lamellar nanomaterials. Regulated thermal treatment under nitrogen results in a Ni₃C–GO composite with a similar morphology to the starting material, and the Ni₃C–GO composite exhibits outstanding electrocatalytic activity and excellent durability for the oxygen reduction reaction.     

Ethanol-assisted graphene oxide-based thin film formation at pentane-water interface

Graphene oxide (GO) can be viewed as an amphiphilic soft material, which form thin films at organic solvent-water interfaces. However, organic solvent evaporation provides little driving force, which results in slow GO transfer in aqueous phase, thus dawdling GO film formation processes for various potential applications. We present an ethanol-assisted self-assembly method for the quick formation of GO or GO-based composite thin films with tunable composition, transmittance, and surface resistivity at pentane-water interface. The thickness of pure GO and reduced GO (rGO) films ranging from ~1 nm to more than 10 nm can be controlled by the concentration of GO in bulk solution. The transmittance of rGO films can be tuned from 72% to 97% at 550 nm while the surface resistivity changes from 8.3 to 464.6 kΩ sq(-1). Ethanol is essential for achieving quick formation of GO thin films. When ethanol is injected into GO aqueous dispersion, it serves as a nonsolvent, compromising the stability of GO and providing driving force to allow GO sheets aggregate at the water-pentane interface. On the other hand, neither the evaporation of pentane nor the mixing between ethanol and water provides sufficient driving forces to allow noteworthy amount of GO sheets to migrate from the bulk aqueous phase to the interface. This method can also be extended to prepare GO-based composites thin films with tunable composition, such as GO/single walled carbon nanotube (SWCNT) composite thin films investigated in this work. Reduced GO/SWCNT composite films show much lower surface resistivity compared to pure rGO thin films. This ethanol-assisted self-assembly method opens opportunities to design and fabricate new functional GO-based hybrid materials for various potential applications.     

Functionalization of graphene oxide towards thermo‐sensitive nanocomposites via moderate in situ SET‐LRP

A mild and efficient strategy is presented for growing thermo‐sensitive polymers directly from the surface of exfoliated graphene oxide (GO). This method involves the covalent attachment of Br‐containing initiating groups onto the surface of GO sheets followed by in situ growing poly[poly(ethylene glycol) ethyl ether methacrylate] (PPEGEEMA) via single‐electron‐transfer living radical polymerization (SET‐LRP). Considering the lack of reactive functional groups on the surface of GO, exfoliated GO sheets were subjected to an epoxide ring opening reaction with tris(hydroxymethyl) aminomethane (TRIS) at room temperature. The initiating groups were grafted onto TRIS‐GO sheets by treating hydroxyls with 2‐bromo‐2‐methylpropionyl bromide at room temperature. PPEGEEMA chains were synthesized by in situ SET‐LRP using CuBr/Me₆TREN as catalytic system at 40 °C in H₂O/THF. The resulting materials were characterized using a range of testing techniques and it was proved that polymer chains were successfully introduced to the surface of GO sheets. After grafting with PPEGEEMA, the modified GO sheets still maintained the separated single layers and the dispersibility was significantly improved. This TRIS‐GO‐PPEGEEMA hybrid material shows reversible self‐assembly and deassembly in water by switching temperature at about 34 °C. Such smart graphene‐based materials promise important potential applications in thermally responsive nanodevices and microfluidic switches. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

室温一步固相反应合成纳米氧化锌的表征、光催化性能及动力学

以七水硫酸锌、氢氧化钠为原料,采用室温一步固相反应合成ZnO纳米粒子,并分别利用X射线衍射分析（XRD）、傅里叶变换红外光谱分析（FTIR）、热重分析（TG）、扫描电子显微分析（SEM）、透射电子显微分析（TEM）、N₂吸附-脱附、紫外可见漫反射光谱分析（UV-Vis DRS）等方法对ZnO纳米粒子进行表征。实验结果表明：不需任何添加剂,室温下可通过一步固相反应合成ZnO纳米粒子,其形成过程首先是ZnSO₄·7H₂O和NaOH充分接触,然后反应形成Zn₄SO₄（OH）₆·5H₂O,最后NaOH的溶解热可使Zn₄SO₄（OH）₆·5H₂O转变为ZnO并逐渐长大形成纳米粒子。同时以甲基橙为降解对象评价了ZnO纳米粒子的光催化活性,实验结果表明：紫外光照射下,该方法合成的ZnO纳米粒子对甲基橙具有较好的光催化活性,且光催化动力学方程符合准一级反应动力学。     

一步微波法制备石墨烯-硫化镉纳米复合材料

石墨烯-硫化镉量子点纳米复合材料在光电领域具有广阔的应用前景, 而其性能依赖于良好的硫化镉纳米颗粒均匀地分布在单片石墨烯片上。为此, 我们发展了一种简便的一步制备高质量石墨烯-硫化镉纳米复合材料的方法。该方法以氧化石墨烯为原料, 二水乙酸镉作为镉源, 硫代乙酰胺作为硫源, 通过微波加热处理数分钟直接制得石墨烯-硫化镉纳米复合材料。电镜照片显示获得的石墨烯-硫化镉纳米复合材料中硫化镉纳米粒子均匀生长在石墨烯表面, 无明显聚集产生。以氧化石墨烯为起始原料一步合成保证了最终纳米复合材料中石墨烯主要以单片形式存在, 而在微波加热合成过程中, 氧化石墨烯也同时还原成石墨烯。     

Fabrication of MnS/GO/PANI nanocomposites on a highly conducting graphite electrode for supercapacitor application

We demonstrate a high surface area of manganese sulfide (MnS) nanoparticles via a simple solution method and investigated its morphology, physicochemical, and electrochemical studies. For the first time, we attempted to exploit the polymerization of aniline without adding HCl, as it is corrosive to the metal sulfide. Instead, the acidic group present on the graphene oxide surface plays a significant role to some extent as an acidic dopant in the polymerization process. This in-situ polymerization results in the uniform coverage of granular PANI on the entire MnS/GO nanocomposite, which enhances the interfacial interactions between PANI and MnS/GO nanoparticles. The introduction of graphene oxide (GO) to pristine MnS improved the specific capacitance, surface area, and average pore size. And incorporating PANI to MnS/GO leads to an increase in the interfacial interaction between the different pore sized nanoparticles giving enhanced specific capacitance. The specific capacitance for MnS/GO/PANI nanocomposite as measured by galvanostatic charge-discharge measurements was found to be 773 F/g at 1 A/g current density, and even at higher current density, it showed a specific capacitance of 484 F/g at 3.8 A/g. The specific capacitance obtained for MnS/GO/PANI nanocomposite from CV shows 822 F/g at 10 mV/s and 315 F/g at 200 mV/s. The combinatorial effects without destroying the metal sulfide nanostructure can provide an alternate route to design, promising electroactive nanocomposites is an ideal choice as a cost-effective, next-generation high-performance supercapacitor application.     

Spherical silica particles decorated with graphene oxide nanosheets as a new sorbent in inorganic trace analysis

Graphene oxide (GO) is a novel material with excellent adsorptive properties. However, the very small particles of GO can cause serious problems is solid-phase extraction (SPE) such as the high pressure in SPE system and the adsorbent loss through pores of frit. These problems can be overcome by covalently binding GO nanosheets to a support. In this paper, GO was covalently bonded to spherical silica by coupling the amino groups of spherical aminosilica and the carboxyl groups of GO (GO@SiO₂). The successful immobilization of GO nanosheets on the aminosilica was confirmed by scanning electron microscopy and X-ray photoelectron spectroscopy. The spherical particle covered by GO with crumpled silk wave-like carbon sheets are an ideal sorbent for SPE of metal ions. The wrinkled structure of the coating results in large surface area and a high extractive capacity. The adsorption bath experiment shows that Cu(II) and Pb(II) can be quantitatively adsorbed at pH 5.5 with maximum adsorption capacity of 6.0 and 13.6 mg g⁻¹, respectively. Such features of GO nanosheets as softness and flexibility allow achieving excellent contact with analyzed solution in flow-rate conditions. In consequence, the metal ions can be quantitatively preconcentrated from high volume of aqueous samples with excellent flow-rate. SPE column is very stable and several adsorption–elution cycles can be performed without any loss of adsorptive properties. The GO@SiO₂ was used for analysis of various water samples by flame atomic absorption spectrometry with excellent enrichment factors (200–250) and detection limits (0.084 and 0.27 ng mL⁻¹ for Cu(II) and Pb(II), respectively).     

Interfacing colloidal graphene oxide sheets with gold nanoparticles

Aqueous solutions of graphene oxide (GO) and citrate-stabilised gold nanoparticles (AuNPs) are two classic, negatively charged colloids. Using the surface plasmon resonance spectra of AuNPs as a probe, we illustrate how the two like-charged colloids interact with each other and in so doing, reveal the unique solution behaviour of GO. We demonstrate that the electrical double layer of the GO sheets in water plays a key role in controlling the interaction between GO and AuNPs, which displays a one-way gate effect. It is shown that GO can capture and disperse AuNPs in water in a controllable fashion, without the need for additional chemical linkers. This discovery allows the successful synthesis of uncapped, yet solution-dispersible metal-nanoparticle assemblies. Such metal nanostructures have long been pursued for nano-plasmonics and sensing applications, but have remained difficult to prepare using conventional polymer dispersants. This work also makes clear that the combination of the two-dimensional conformation of GO along with its large molecular size and self-contained functional groups allows it to act as a unique soluble nanocarrier/substrate (the thinnest, functionalised flat substrate possible in nature) for the synthesis of new, soluble functional materials.