Host-sensitized emission of LiInW2O8 wolframites: From red-Eu to white-Dy phosphors

The LiInW₂O₈:Eu³⁺, LiInW₂O₈:Dy³⁺ and LiInW₂O₈:Eu³⁺/Dy³⁺ phosphors were synthesized by solid-state reaction and their photoluminescence properties were studied. Under UV excitation, the LiInW₂O₈:Eu³⁺ phosphor exhibits an intense red emission whereas the LiInW₂O₈:Dy³⁺ and LiInW₂O₈:Dy³⁺/Eu³⁺ phosphors show a white emission. The WO₆ octahedra play a major role in the luminescence of the host lattice, characterized by a blue emission under UV excitation. The emission of activator ion results from an efficient energy transfer from the LiInW₂O₈ host lattice to the Eu³⁺ and Dy³⁺ ions. The LiIn_0.97Dy³⁺_0.03W₂O₈ and LiIn_0.965 Dy³⁺_0.03Eu³⁺_0.005W₂O₈ samples, optimized for white emission, are interesting candidates for solid-state lighting applications.     

White-light-emitting long-lasting phosphorescence in Dy-doped SrSiO3

We report on a luminescent phenomenon in Dy³⁺-doped SrSiO₃ long-lasting phosphor. After irradiation by a 254-nm UV lamp for 5 min, the Dy³⁺-doped SrSiO₃ phosphor emits white light-emitting long-lasting phosphorescence for more than 1 h even after the irradiation source has been removed. Photoluminescence, long-lasting phosphorescence and thermoluminescence (TL) spectra are used to explain this phenomenon. Photoluminescence spectra reveal that the white light-emitting long-lasting phosphorescence originated from the two mixtures of Dy³⁺ characteristic luminescence, the 480-nm blue emission (⁴F_9/2→⁶H_15/2) and the 572-nm yellow emission (⁴F_9/2→⁶H_13/2). TL spectra shows that the introduction of Dy³⁺ ions into the SrSiO₃ host produces a highly dense trapping level at 377 K (0.59 eV), which is responsible for the long-lasting phosphorescence at room temperature. A possible mechanism of the long-lasting phosphorescence based on the experimental results is proposed. It is considered that the long-lasting phosphorescence is due to persistent energy transfer from the electron traps to the Dy³⁺ ions, which creates the persistent luminescence of Dy³⁺ to produce the white light-emitting long-lasting phosphorescence.     

Luminescent properties of SrBPO5:Dy3+ and effect of Co-doping with Tm3+

A series of phosphors SrBPO₅:Dy³⁺ and SrBPO₅:Dy³⁺,Tm³⁺ was synthesized by traditional solid-state high-temperature method and was characterized by X-ray diffraction (XRD) and fluorescence spectrophotometry. For SrBPO₅:Dy³⁺ material, the f-f transitions of Dy³⁺ ions were assigned and discussed, and the optimal doping concentration of Dy³⁺ was found. As a result of co-doping SrBPO₅:Dy³⁺ with Tm³⁺, the phosphors SrBPO₅:Dy³⁺,Tm³⁺ can be effectively excited by 360 nm ultraviolet (UV), and exhibit color-tunable emission from blue to yellowish-white region with different doping concentration. The present study can pave the way for the creation of efficient UV phosphors using Dy³⁺,Tm³⁺ co-doped systems for near-UV InGaN-based light emitting diodes (LEDs).     

BaLaB9O16中Ce3+敏化Dy3+发光的机理

在紫外光激发下,研究了BaLaB₉O₁₆中Dy³⁺、Ce³⁺的发光光谱、激发光谱、发光强度及荧光寿命随着组成变化的规律性.结果表明;De³⁺对Dy³⁺的发光有相当强的敏化作用,Ce³⁺→Dy³⁺的能量传递效率可高达93%,能量传递的机理为电偶极-偶极相互作用的共振传递.根据349nm激发下Dy³⁺发光强度与浓度的关系,证明了Dy³⁺发光的自身浓度猝灭机理也为电偶极-偶极相互作用.     

Solvent directed morphologies and enhanced luminescent properties of BaWO4:Tm3+,Dy3+ for white light emitting diodes

A series of Tm³⁺ and Dy³⁺ codoped BaWO₄ phosphors with tunable shapes were controllably synthesized by a facile solvothermal method. The effects of ratio of ethylene glycol (EG) and water on the morphologies of BaWO₄ structures are systematically studied. It was discovered that the reason for these morphological changes is based on the reaction speed of the kinetic control, which relates to the strong chelating abilities of ethylene glycol. And when the solvent is pure ethylene glycol, the peanut-like BaWO₄:Dy³⁺ has the strongest emission intensity. Moreover, the emission color of the phosphors varied from blue (0.232, 0.180) to white (0.268, 0.250) by controlling Dy³⁺ ions content with a fixed Tm³⁺ concentration. The energy transfer mechanism was investigated in detail. With increasing the doped concentration of Dy³⁺ ions, the energy transfer efficiency of BaWO₄:0.005Tm³⁺,yDy³⁺ increased gradually and reached as high as 63% when the Dy³⁺ doped concentration is 0.03. The critical distance R_C calculated by the spectral overlap method is about 19.93 Å, and it is in good agreement with that obtained using the concentration quenching method (19.70 Å), indicating that the electric dipole-dipole interaction is the main energy transfer mechanism for BaWO₄:Tm³⁺,Dy³⁺ phosphors.     

Enhancement of the photoluminescence and long afterglow properties of Ca<Subscript>2</Subscript>MgSi<Subscript>2</Subscript>O<Subscript>7</Subscript>:Eu<Superscript>2+</Superscript> phosphor by Dy<Superscript>3+</Superscript> co-doping

The Ca₂MgSi₂O₇:Eu²⁺ and Ca₂MgSi₂O₇:Eu²⁺, Dy³⁺ long afterglow phosphors were synthesized under a weak reducing atmosphere by the traditional high temperature solid state reaction method. The synthesized phosphors were characterized by powder X-ray diffraction (XRD) and energy dispersive X-ray spectroscopy (EDX) techniques. The luminescence properties were investigated using thermoluminescence (TL), photoluminescence (PL), long afterglow, mechanoluminescence (ML), and ML spectra techniques. The crystal structure of sintered phosphors was an akermanite type structure, which belongs to the tetragonal crystallography. TL properties of these phosphors were investigated, and the results were also compared. Under the ultraviolet excitation, the emission spectra of both prepared phosphors were composed of a broad band peaking at 535 nm, belonging to the broad emission band. When the Ca₂MgSi₂O₇:Eu²⁺ phosphor is co-doped with Dy³⁺, the PL, afterglow and ML intensity is strongly enhanced. The decay graph indicates that both the sintered phosphors contain fast decay and slow decay process. The ML intensities of Ca₂MgSi₂O₇:Eu²⁺ and Ca₂MgSi₂O₇:Eu²⁺, Dy³⁺ phosphors were proportionally increased with the increase of impact velocity, which suggests that this phosphor can be used as sensors to detect the stress of an object.     

Effects of boric acid on structural and luminescent properties of BaAl<Subscript>2</Subscript>O<Subscript>4</Subscript>:(Eu<Superscript>2+</Superscript>, Dy<Superscript>3+</Superscript>) phosphors

Eu²⁺/Dy³⁺-codoped BaAl₂O₄ phosphors were prepared by conventional solid-state reaction with boric acid flux. The effects of boric acid on structural and luminescent properties of BaAl₂O₄:(Eu²⁺, Dy³⁺) were investigated. The crystallinity of BaAl₂O₄ improved with increasing amount of H₃BO₃. Incorporation of Eu²⁺ and Dy³⁺ ions into effective lattice sites was promoted by H₃BO₃ addition. As a result, Eu²⁺ emission in BaAl₂O₄ was greatly enhanced by H₃BO₃, and the duration of persistent luminescence increased with the amount of H₃BO₃. However, the decay lifetime of persistent luminescence was not strongly influenced by the amount of H₃BO₃.     

Morphology control and luminescence properties of BaMgAl10O17:Eu phosphors prepared by spray pyrolysis

Starting from the aqueous solutions of metal nitrates with citric acid and polyethylene glycol (PEG) as additives, BaMgAl₁₀O₁₇:Eu²⁺ (BAM:Eu²⁺) phosphors were prepared by a two-step spray pyrolysis (SP) method. X-ray powder diffraction (XRD), scanning electron microscopy (SEM) and photoluminescence spectra were used to characterize the resulted BAM:Eu²⁺ phosphors. The obtained BAM:Eu²⁺ phosphor particles have spherical shape, submicron size (0.5-3 μm). The effects of process conditions of the spray pyrolysis, such as molecular weight and concentration of PEG, on the morphology and luminescence properties of phosphor particles were investigated. Adequate amount of PEG was necessary for obtaining spherical particles, and the optimum emission intensity could be obtained when the concentration of PEG was 0.03 g/ml in the precursor solution. Moreover, the emission intensity of the phosphors increased with increasing of metal ion concentration in the solution. Compared with the BAM:Eu²⁺ phosphor prepared by citrate-gel method, spherical BAM:Eu²⁺ phosphor particles showed a higher emission intensity.     

Enhanced photoluminescence of Ba2GdNbO6: Eu/Dy phosphors by Li doping

The Ba₂GdNbO₆: Eu³⁺/Dy³⁺ and Li⁺-doped Ba₂GdNbO₆: Eu³⁺/Dy³⁺ phosphors were prepared by solid-state reaction process. X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM) and photoluminescence (PL) as well as lifetimes, was utilized to characterize the resulting phosphors. Under the excitation of ultraviolet light, the Ba₂GdNbO₆: Eu³⁺/Dy³⁺ and Li⁺-doped Ba₂GdNbO₆: Eu³⁺/Dy³⁺ show the characteristic emissions of Eu³⁺ (⁵D₀-⁷F_1,2,3 transitions dominated by ⁵D₀-⁷F₁ at 593 nm) and Dy³⁺ (⁴F_9/2-⁶H_15/2,_13/2 transitions dominated by ⁴F_9/2-⁶H_15/2 at 494 nm), respectively. The incorporation of Li⁺ ions into the Ba₂GdNbO₆: Eu³⁺/Dy³⁺ phosphors has enhanced the PL intensities depending on the doping concentration of Li⁺, and the highest emission was obtained in Ba₂Gd_0.9NbO₆: 0.10Eu³⁺, 0.01Li⁺ and Ba₂Gd_0.95NbO₆: 0.05Dy³⁺, 0.07Li⁺, respectively. An energy level diagram was proposed to explain the luminescence process in the phosphors.     

颜色可调Sr3Y（BO3）3∶Tm3+，Dy3+荧光粉的发光性能及能量传递

采用高温固相法制备了Sr_3Y(BO_3)_3:xTm~(3+),yDy~(3+)荧光粉,并通过XRD、SEM和荧光光谱仪对样品的物相、微观形貌、发光性能、能量传递机制和CIE色坐标进行了分析。结果表明:Sr_3Y(BO_3)_3:xTm~(3+)荧光粉在监测波长为359 nm时发射蓝光,Tm~(3+)的浓度淬灭点为x=0.08;在Sr_3Y(BO_3)_3:0.08Tm~(3+),yDy~(3+)荧光粉中,随着Dy~(3+)掺杂浓度的增加,Tm~(3+)的发光强度降低而Dy~(3+)发光强度却先增加后降低,Dy~(3+)的浓度淬灭点为y=0.1;通过改变Dy~(3+)掺杂浓度或改变激发光的波长,均可实现发射光的颜色可调;在Tm~(3+)-Dy~(3+)离子之间存在能量传递。当Dy~(3+)掺杂浓度(物质的量分数)为0.15时能量传递效率达75.14%,能量传递机制为电偶极-电偶极相互作用。     

Luminescence properties of Dy3+ or/and Sm3+ doped LiLa(WO4)2 phosphors and energy transfer from Dy3+ to Sm3+

The Dy³⁺ or/and Sm³⁺ doped LiLa(WO₄)₂ phosphors are synthesized by a facile solid state reaction method. The phase and luminescence properties of the phosphors are investigated. The powder X-ray diffraction (XRD) results show that the phosphor has a tetragonal phase crystal structure. The quenching concentration of single doped Dy³⁺ and Sm³⁺ in the LiLa(WO₄)₂ are determined to be 6% and 3%, respectively. Under the excitation of 404 nm, warm white light is obtained in the co-doped phosphors. With the concentration of Sm³⁺ increasing, the correlated color temperature (CCT) gradually decreases from 3090 to 2453 K. Two kinds of energy transfer may exist at the same time. The overlap between the emission spectrum of Dy³⁺ and the excitation spectrum of Sm³⁺ reveals that the energy of Dy³⁺ can transfer to Sm³⁺ via radiation. Another way of energy transfer, that is non-radiative energy transfer, is attributed to the excited state of Dy³⁺ (⁴F_9/2) slightly higher than that of Sm³⁺ (⁴I_19/2). The calculation results show that non-radiative energy transfer process from Dy³⁺ to Sm³⁺ ions is predominated by quadrupole–quadrupole interaction.     

Efficient photoluminescence of Dy at low concentrations in nanocrystalline ZrO2

Nanocrystalline ZrO₂:Dy³⁺ were prepared by sol-gel and the structural and photoluminescence properties characterized. The crystallite size ranges from 20 to 50 nm and the crystalline phase is a mixture of tetragonal and monoclinic structure controlled by dopant concentration. Strong white light produced by the host emission band centered at ∼460 nm and two strong Dy³⁺ emission bands, blue (488 nm) and yellow (580 nm), under direct excitation at 350 nm were observed. The highest efficiency was obtained for 0.5 mol% of Dy³⁺. Emission is explained in terms of high asymmetry of the host suggesting that Dy³⁺ are substituted mainly into Zr⁴⁺ lattice sites at the crystallite surface. Luminescence quenching is explained in terms of cross-relaxation of intermediate Dy³⁺ levels.     

Synthesis,Persistent Luminescence,and Thermoluminescence Properties of Yellow Sr3SiO5:Eu2+,RE3+ (RE=Ce,Nd, Dy,Ho, Er,Tm, Yb) and Orange‐Red Sr3−xBaxSiO5:Eu2+, Dy3+ Phosphor

Sunlight‐excitable orange or red persistent oxide phosphors with excellent performance are still in great need. Herein, an intense orange‐red Sr_3?xBa_xSiO₅:Eu²⁺,Dy³⁺ persistent luminescence phosphor was successfully developed by a two‐step design strategy. The XRD patterns, photoluminescence excitation and emission spectra, and the thermoluminescence spectra were investigated in detail. By adding non‐equivalent trivalent rare earth co‐dopants to introduce foreign trapping centers, the persistent luminescence performance of Eu²⁺ in Sr₃SiO₅ was significantly modified. The yellow persistent emission intensity of Eu²⁺ was greatly enhanced by a factor of 4.5 in Sr₃SiO₅:Eu²⁺,Nd³⁺ compared with the previously reported Sr₃SiO₅:Eu²⁺, Dy³⁺. Furthermore, Sr ions were replaced with equivalent Ba to give Sr_3?xBa_xSiO₅:Eu²⁺,Dy³⁺ phosphor, which shows yellow‐to‐orange‐red tunable persistent emissions from λ=570 to 591 nm as x is increased from 0 to 0.6. Additionally, the persistent emission intensity of Eu²⁺ is significantly improved by a factor of 2.7 in Sr_3?xBa_xSiO₅:Eu²⁺,Dy³⁺ (x=0.2) compared with Sr₃SiO₅:Eu²⁺,Dy³⁺. A possible mechanism for enhanced and tunable persistent luminescence behavior of Eu²⁺ in Sr_3?xBa_xSiO₅:Eu²⁺,RE³⁺ (RE=rare earth) is also proposed and discussed.     

Controlled synthesis and luminescent properties of Eu(Eu), Dy-doped Sr3Al2O6 phosphors by hydrothermal treatment and postannealing approach

In this work, Sr₃Al₂O₆: Eu²⁺ (Eu³⁺), Dy³⁺ phosphors have been prepared by hydrothermal treatment and subsequently postannealing approach, using Sr(NO₃)₂, Al(NO₃)₃·9H₂O, and CO(NH₂)₂ as starting materials. The as-obtained phosphors were characterized by means of XRPD, FESEM, and PL techniques. In addition, many reaction parameters were studied in detail, including the initial mole ratios, hydrothermal reaction temperature, calcination temperature and calcination atmosphere. Remarkably, two scientific merits exist herein: Sr₃Al₂O₆: Eu²⁺ (Eu³⁺), Dy³⁺ phosphors can be selectively obtained in a reducing atmosphere (H₂/Ar, 20%+80%) and in air, respectively; adding certain amount of sodium citrate can alter the shape and size of Sr₃Al₂O₆: Eu²⁺ (Eu³⁺), Dy³⁺ phosphors in essence. Besides, the luminescent properties of Sr₃Al₂O₆: Eu²⁺ (Eu³⁺), Dy³⁺ phosphors were studied by excitation spectra, emission spectra and decay curves.     

White light emission from Tm/Dy co-doped oxyfluoride germanate glasses under UV light excitation

In this paper, we report on the absorption and photoluminescence properties of Tm³⁺/Dy³⁺ ions co-doped oxyfluoride germanate glasses for white light emission. The X-ray diffraction (XRD) and differential thermal analysis (DTA) profiles of the host glass have been carried out to confirm its structure and thermal stability. From the measured absorption spectra, Judd-Ofelt (J-O) intensity parameters (Ω₂, Ω₄ and Ω₆) have been evaluated for Tm³⁺ and Dy³⁺ ions. A combination of blue, yellow and red emissions has emerged in these glasses, which allows the observation of bright white light when the glasses are excited by the ultraviolet light. The white light luminescence colour could be changed by varying the excitation wavelength. Also, various colours of luminescence, including white light, can be easily tuned by adjusting the concentrations of Tm³⁺ or Dy³⁺ ions in the co-doped glasses. Concentration quenching effect was also investigated and possible energy transfer mechanism from Dy³⁺→Tm³⁺ ions was explained which is also confirmed by the decay lifetime measurements.     

Synthesis and characterization of Eu3+/Dy3+ codoped composite phosphors SrAl2Si2O8/SrAlSi1/2O7/2 via a one-pot nitrate-gel process

Composite phosphors SrAl₂Si₂O₈/SrAlSi_1/2O_7/2 codoped with Eu³⁺ and Dy³⁺ were synthesized via a simple one-pot nitrate-gel process. The thermal decomposition process of the precursor is investigated by thermal analysis, X-ray diffraction and infrared spectroscopy, respectively. The as-prepared Eu³⁺/Dy³⁺ codoped SrAl₂Si₂O₈/SrAlSi_1/2O_7/2 phosphors could yield blue (436 nm), bluegreen (486 nm), yellow (583 nm), and red (617 nm) lights under near-UV 380 nm excitation from a composite matrix produced by spontaneous phase separation during heat treatment of the precursor. Moreover, the effects of Dy³⁺ doping concentration on the structures, defect features, and luminescence properties of the composite phosphors were examined in detail.     

Enhancing the Photocatalytic Activity of Sr4Al14O25: Eu2+, Dy3+ Persistent Phosphors by Codoping with Bi3+ Ions

The photocatalytic activity of Bismuth‐codoped Sr₄Al₁₄O₂₅: Eu²⁺, Dy³⁺ persistent phosphors is studied by monitoring the degradation of the blue methylene dye UV light irradiation. Powder phosphors are obtained by a combustion synthesis method and a postannealing process in reductive atmosphere. The XRD patterns show a single orthorhombic phase Sr₄Al₁₄O₂₅: Eu²⁺, Dy³⁺, Bi³⁺ phosphors even at high Bismuth dopant concentrations of 12 mol%, suggesting that Bi ions are well incorporated into the host lattice. SEM micrographs show irregular micrograins with sizes in the range of 0.5–20 μm. The samples present an intense greenish‐blue fluorescence and persistent emissions at 495 nm, attributed to the 5d–4f allowed transitions of Eu²⁺. The fluorescence decreases as Bi concentration increases; that suggest bismuth‐induced traps formation that in turn quench the luminescence. The photocatalytic evaluation of the powders was studied under both 365 nm UV and solar irradiations. Sample with 12 mol% of Bi presented the best MB degradation activity; 310 min of solar irradiation allow 100% MB degradation, whereas only 62.49% MB degradation is achieved under UV irradiation. Our results suggest that codoping the persistent phosphors with Bi³⁺ can be an alternative to enhance their photocatalytic activity.     

Novel red-emitting phosphors, (Mg(1−x−y)MnxDyy)Al2Si2O8 and (Mg(1−x−y)MnxTmy)Al2Si2O8

Mn⁴⁺ doped and Dy³⁺, Tm³⁺ co-doped MgAl₂Si₂O₈-based phosphors were prepared by conventional solid state reaction at 1,300 °C. They were characterized by thermogravimetry, differential thermal analysis, X-ray powder diffraction, photoluminescence, and scanning electron microscopy. The luminescence mechanism of the phosphors, which showed broad red emission bands in the range of 600–715 nm and had a different maximum intensity when activated by UV illumination, was discussed. Such a red emission can be attributed to the ²E → ⁴A₂ transitions of Mn⁴⁺.     

The effect of calcium substitution on the afterglow of Eu2+/Dy3+ doped Sr4Al14O25

The effect of calcium substitution on the afterglow of tetrastrontium aluminate phosphors (Sr₄Al₁₄O₂₅:Eu²⁺, Dy³⁺) was investigated. A series of (Sr₁-_xCa_x)O⊎nAl₂O₃:Eu²⁺(1%), Dy³⁺(0.5%), with variation of calcium content (x = 0 − 1), were synthesized by a high temperature solid state reaction in a reducing atmosphere. The photoluminescence, persistent luminescence (afterglow), and lumen equivalents of these materials were studied and compared. It turned out that the afterglow properties of the phosphors were strongly dependent on the Sr/Ca ratio. As the Ca content increased, a phase transition and blue shift in emission spectra were observed.      

Eu,Dy co-doped SrAl<Subscript>2</Subscript>O<Subscript>4</Subscript> phosphors prepared by sol–gel-combustion processing

SrAl₂O₄:Eu²⁺, Dy³⁺ powders were synthesized by sol–gel–combustion process using metal nitrates as the source of metal ions and citric acid as a chelating agent of metal ions. The amounts of citric acid in mole were two times those of the metal ions. By tracing the formation process of the sol–gel, it is found that decreasing the amount of NO₃ ⁻ in the solution is necessary for the formation of transparent sol and gel, and the dropping of ethanol into the precursor solution can decrease the amount of NO₃ ⁻ in the solution. By combusting citrate sol at 600 °C, followed by heating the resultant combustion ash at 1,100–1,300 °C in a weak reductive atmosphere containing active carbon, SrAl₂O₄:Eu²⁺, Dy³⁺ phosphors can prepared. X-ray diffraction, Thermogravimetry–differential thermal analysis, scanning electron microscopy and fluorescence spectrophotometer were used to investigate the formation process and luminescent properties of the as-synthesized SrAl₂O₄:Eu²⁺, Dy³⁺. The results reveal that the SrAl₂O₄ crystallizes completely when the combustion ash was sintered at 1,200–1,300 °C. The excitation and emission spectra indicate that excitation broadband mainly lies in a visible range and the phosphors emit strong light at 510 nm under the excitation of 348 nm. The afterglow of phosphors lasts for over 10 h when the excited source is cut off.