Synthesis and thermochemistry of SrB2O4·4H2O and SrB2O4

Two pure strontium borates SrB₂O₄·4H₂O and SrB₂O₄ have been synthesized and characterized by means of chemical analysis and XRD, FT-IR, DTA-TG techniques. The molar enthalpies of solution of SrB₂O₄·4H₂O and SrB₂O₄ in 1 mol dm⁻³ HCl(aq) were measured to be −(9.92 ± 0.20) kJ mol⁻¹ and −(81.27 ± 0.30) kJ mol⁻¹, respectively. The molar enthalpy of solution of Sr(OH)₂·8H₂O in (HCl + H₃BO₃)(aq) were determined to be −(51.69 ± 0.15) kJ mol⁻¹. With the use of the enthalpy of solution of H₃BO₃ in 1 mol dm⁻³ HCl(aq), and the standard molar enthalpies of formation for Sr(OH)₂·8H₂O(s), H₃BO₃(s), and H₂O(l), the standard molar enthalpies of formation of −(3253.1 ± 1.7) kJ mol⁻¹ for SrB₂O₄·4H₂O, and of −(2038.4 ± 1.7) kJ mol⁻¹ for SrB₂O₄ were obtained.     

Thermodynamics of BaNd2Fe2O7(s) and BaNdFeO4(s) in the system BaNdFeO

Two compounds, BaNd₂Fe₂O₇(s) and BaNdFeO₄(s) in the quaternary system BaNdFeO were prepared by citrate-nitrate gel combustion route and characterized by X-ray diffraction analysis. Heat capacities of these two oxides were measured in two different temperature ranges: (i) 130-325 K and (ii) 310-845 K, using a heat flux type differential scanning calorimeter. Two different types of solid-state electrochemical cells with CaF₂(s) as the solid electrolyte were employed to measure the e.m.f. as a function of temperature. The standard molar Gibbs energies of formation of these quaternary oxides were calculated as a function of temperature from the e.m.f. data. The standard molar enthalpies of formation from elements at 298.15 K, ΔfHm° (298.15 K) and the standard entropies, Sm° (298.15 K) of these oxides were calculated by the second law method. The values of ΔfHm° (298.15 K) and Sm° (298.15 K) obtained for BaNd₂Fe₂O₇(s) are: −2756.9 kJ mol⁻¹ and 234.0 J K⁻¹ mol⁻¹ whereas those for BaNdFeO₄(s) are: −2061.5 kJ mol⁻¹ and 91.6 J K⁻¹ mol⁻¹, respectively.     

Vaporization of DyI3(s) and thermochemistry of the homocomplexes (DyI3)2(g) and (DyI3)3(g)

The vaporization of DyI₃(s) was investigated in the temperature range between 833 and 1053 K by the use of Knudsen effusion mass spectrometry. The ions DyI₂⁺, DyI₃⁺, Dy₂I₄⁺, Dy₂I₅⁺, Dy₃I₇⁺, and Dy₃I₈⁺ were detected in the mass spectrum of the equilibrium vapor. The gaseous species DyI₃, (DyI₃)₂, and (DyI₃)₃ were identified and their partial pressures determined. Enthalpies and entropies of sublimation resulted according to the second- and third-law methods. The following sublimation enthalpies at 298 K were determined for the gaseous species given in brackets: 274.8±8.2 kJ mol⁻¹ [DyI₃], 356.0±11.3 kJ mol⁻¹ [(DyI₃)₂], and 436.6±14.6 kJ mol⁻¹ [(DyI₃)₃]. The enthalpy changes of the dissociation reactions (DyI₃)₂=2 DyI₃ and (DyI₃)₃=3 DyI₃ were obtained as Δ_dH°(298)=193.3±5.6 and 390.3±13.0 kJ mol⁻¹, respectively.     

Energetics of cobalt phosphate frameworks: α, β, and red NaCoPO4

Thermal behavior, relative stability, and enthalpy of formation of α (pink phase), β (blue phase), and red NaCoPO₄ are studied by differential scanning calorimetry, X-ray diffraction, and high-temperature oxide melt drop solution calorimetry. Red NaCoPO₄ with cobalt in trigonal bipyramidal coordination is metastable, irreversibly changing to α NaCoPO₄ at 827 K with an enthalpy of phase transition of −17.4±6.9 kJ mol⁻¹. α NaCoPO₄ with cobalt in octahedral coordination is the most stable phase at room temperature. It undergoes a reversible phase transition to the β phase (cobalt in tetrahedra) at 1006 K with an enthalpy of phase transition of 17.6±1.3 kJ mol⁻¹. Enthalpy of formation from oxides of α, β, and red NaCoPO₄ are −349.7±2.3, −332.1±2.5, and −332.3±7.2 kJ mol⁻¹; standard enthalpy of formation of α, β, and red NaCoPO₄ are −1547.5±2.7, −1529.9±2.8, and −1530.0±7.3 kJ mol⁻¹, respectively. The more exothermic enthalpy of formation from oxides of β NaCoPO₄ compared to a structurally related aluminosilicate, NaAlSiO₄ nepheline, results from the stronger acid-base interaction of oxides in β NaCoPO₄ (Na₂O, CoO, P₂O₅) than in NaAlSiO₄ nepheline (Na₂O, Al₂O₃, SiO₂).     

Thermodynamic properties of the gaseous barium silicates BaSiO2 and BaSiO3

In the present study, the stability of gaseous barium silicates was confirmed by the high temperature mass spectrometry. On the basis of equilibrium constants measured for gas-phase reactions, the standard formation enthalpies were determined for gaseous barium silicates as (−510 ± 15) kJ · mol⁻¹ and (−884 ± 18) kJ · mol⁻¹ at 298 K; standard atomization enthalpies as (1637 ± 17) kJ · mol⁻¹ and (2318 ± 20) kJ · mol⁻¹ at 298 K for BaSiO₂ and BaSiO₃, respectively. Based on the results obtained the critical analysis of the literature data was carried out.     

Thermodynamic studies on SrFe12O19(s), SrFe2O4(s), Sr2Fe2O5(s) and Sr3Fe2O6(s)

The citrate-nitrate gel combustion route was used to prepare SrFe₂O₄(s), Sr₂Fe₂O₅(s) and Sr₃Fe₂O₆(s) powders and the compounds were characterized by X-ray diffraction analysis. Different solid-state electrochemical cells were used for the measurement of emf as a function of temperature from 970 to 1151 K. The standard molar Gibbs energies of formation of these ternary oxides were calculated as a function of temperature from the emf data and are represented as (SrFe₂O₄, s, T)/kJ mol⁻¹ (±1.7)=−1494.8+0.3754 (T/K) (970?T/K?1151). (Sr₂Fe₂O₅, s, T)/kJ mol⁻¹ (±3.0)=−2119.3+0.4461 (T/K) (970?T/K?1149). (Sr₃Fe₂O₆, s, T)/kJ mol⁻¹ (±7.3)=−2719.8+0.4974 (T/K) (969?T/K?1150).Standard molar heat capacities of these ternary oxides were determined from 310 to 820 K using a heat flux type differential scanning calorimeter (DSC). Based on second law analysis and using the thermodynamic database FactSage software, thermodynamic functions such as Δ_fH°(298.15 K), S°(298.15 K) S°(T), C_p°(T), H°(T), {H°(T)-H°(298.15 K)}, G°(T), free energy function (fef), Δ_fH°(T) and Δ_fG°(T) for these ternary oxides were also calculated from 298 to 1000 K.     

Standard molar enthalpies of formation of Ln(C9H6NO)2(C2H3O2) (Ln: Nd, Sm)

Using an on-line solution-reaction isoperibol calorimeter, the standard molar enthalpies of reaction for the general thermochemical reaction: LnCl₃·6H₂O(s) + 2C₉H₇NO(s) + CH₃COONa(s) = Ln(C₉H₆NO)₂(C₂H₃O₂)(s) + NaCl(s) + 2HCl(g) + 6H₂O(l) (Ln: Nd, Sm), were determined at T=298.15 K, as  kJ mol^−l, respectively. From the mentioned standard molar enthalpies of reaction and other auxiliary thermodynamic quantities, the standard molar enthalpies of formation of Ln(C₉H₆NO)₂(C₂H₃O₂)(s) (Ln: Nd, Sm), at T=298.15 K, have been derived to be: −(1494.7±3.3) and −(1501.5±3.4) kJ mol^−l, respectively.     

Thermal properties of the pyrochlore, Y2Ti2O7

The thermal conductivity and heat capacity of high-purity single crystals of yttrium titanate, Y₂Ti₂O_7, have been determined over the temperature range 2 K?T?300 K. The experimental heat capacity is in very good agreement with an analysis based on three acoustic modes per unit cell (with the Debye characteristic temperature, θ_D, of ca. 970 K) and an assignment of the remaining 63 optic modes, as well as a correction for C_p−C_v. From the integrated heat capacity data, the enthalpy and entropy relative to absolute zero, are, respectively, H(T=298.15 K)−H₀=34.69 kJ mol⁻¹ and S(T=298.15 K)−S₀=211.2 J K⁻¹ mol⁻¹. The thermal conductivity shows a peak at ca. θ_D/50, characteristic of a highly purified crystal in which the phonon mean free path is about 10 μm in the defect/boundary low-temperature limit. The room-temperature thermal conductivity of Y₂Ti₂O₇ is 2.8 W m⁻¹ K⁻¹, close to the calculated theoretical thermal conductivity, κ_min, for fully coupled phonons at high temperatures.     

Synthesis, heat capacity and enthalpy of formation of [Ho2(l-Glu)2(H2O)8](ClO4)4·H2O

A complex of holmium perchlorate coordinated with l-glutamic acid, [Ho₂(l-Glu)₂(H₂O)₈](ClO₄)₄·H₂O, was prepared with a purity of 98.96%. The compound was characterized by chemical, elemental and thermal analysis. Heat capacities of the compound were determined by automated adiabatic calorimetry from 78 to 370 K. The dehydration temperature is 350 K. The dehydration enthalpy and entropy are 16.34 kJ mol⁻¹ and 16.67 J K⁻¹ mol⁻¹, respectively. The standard enthalpy of formation is −6474.6 kJ mol⁻¹ from reaction calorimetry at 298.15 K.     

Kinetic study of the oxidative addition reaction between methyl iodide and [Rh(FcCOCHCOCF3)(CO)(PPh3)]: Structure of [Rh(FcCOCHCOCF3)(CO)(PPh3)(CH3)(I)]

The kinetics of oxidative addition of CH₃I to [Rh(FcCOCHCOCF₃)(CO)(PPh₃)], where Fc = ferrocenyl and (FcCOCHCOCF₃)⁻ = fctfa = ferrocenoylacetonato, have been studied utilizing UV/Vis, IR, ¹H and ³¹P NMR techniques. Three definite sets of reactions involving isomers of at least two distinctly different classes of Rh^III-alkyl and two different classes of Rh^III-acyl species were observed. Rate constants for this reaction in CHCl₃ at 25 °C, applicable to the reaction sequence below, were determined as k₁ = 0.00611(1) dm³ mol⁻¹ s⁻¹, k₋₁ = 0.0005(1) s⁻¹, k₃ = 0.00017(2) s⁻¹ and k₄ = 0.0000044(1) s⁻¹ while k₋₃ ? k₃ and k₋₄ ? k₄ but both ≠0. The indeterminable equilibrium K₂ was fast enough to be maintained during Rh^I depletion in the first set of reactions and during the Rh^IIIalkyl2 formation in the second set of reactions. From a ¹H and ³¹P NMR study in CDCl₃, K_c1 was found to be 0.68, K_c2 = 2.57, K_c3 = 1.00, K_c4 = 4.56 and K_c5 = 1.65.     

Kinetics and mechanism of hydroboration reactions of HBBr2 · SMe2 and HBCl2 · SMe2 - Application of B NMR spectroscopy

The kinetics and mechanism of the hydroboration reactions of 1-octene with HBBr₂ · SMe₂ and HBCl₂ · SMe₂, in CH₂Cl₂ as a solvent, were studied. Rates of hydroboration were monitored using ¹¹B NMR spectroscopy. The reactions exhibited simple second-order kinetics of the form . The HBCl₂ · SMe₂ was found to be 20 times more reactive than the HBBr₂ · SMe₂. The overall activation parameters (ΔH^≠, ΔS^≠) for the reaction of HBBr₂ · SMe₂ with 1-octene were found to be 82 ± 1 kJ mol⁻¹, −18 ± 4 J K⁻¹ mol⁻¹ and with 1-hexyne were 78 ± 4 kJ mol⁻¹ −34 ± 12 J K⁻¹ mol⁻¹. For the reaction of HBCl₂ · SMe₂ with 1-octene, ΔH^≠ and ΔS^≠ were 104 ± 5 kJ mol⁻¹ and 43 ± 16 J K⁻¹ mol⁻¹, respectively. The activation parameters (ΔH^≠, ΔS^≠) for the dissociation of Me₂S from HBBr₂ · SMe₂ were found to be 104 ± 2 kJ mol⁻¹, +33 ± 8 J K⁻¹ mol⁻¹, respectively. Based on the activation parameters, it was concluded that the detaching of Me₂S from the boron centre follows a dissociative mechanism, while the hydroboration process follows an associative pathway. It was also concluded that the dissociation of Me₂S from the boron centre is the rate determining step.     

Synthesis, characterization and standard molar enthalpy of formation of La(C7H5O3)2·(C9H6NO)

The product from reaction of lanthanum chloride seven-hydrate with salicylic acid and 8-hydroxyquinoline, La(C₇H₅O₃)₂·(C₉H₆NO), was characterized by IR, elemental analysis, molar conductance, and thermogravimetric analysis. The standard molar enthalpies of solution of [LaCl₃·7H₂O (s)], [2C₇H₆O₃ (s)], [C₉H₇NO (s)] and [La(C₇H₅O₃)₂·(C₉H₆NO) (s)] in a mixed solvent of absolute ethyl alcohol, dimethyl formamide (DMF) and perchloric acid were determined by calorimetry to be [LaCl₃·7H₂O (s), 298.15 K] = −96.45 ± 0.18 kJ mol⁻¹, [2C₇H₆O₃ (s), 298.15 K] = 14.99 ± 0.17 kJ mol⁻¹, [C₉H₇NO (s), 298.15 K] = −3.86 ± 0.06 kJ mol⁻¹ and [La(C₇H₅O₃)₂·(C₉H₆NO) (s), 298.15 K] = −117.78 ± 0.11 kJ mol⁻¹. The enthalpy change of the reaction

(1)     

Phase transitions and molecular motions in [Ni(ND3)6](ClO4)2

[Ni(ND₃)₆](ClO₄)₂ has three solid phases between 100 and 300 K. The phase transitions temperatures at heating (T_C1^h=164.1 K and T_C2^h=145.1 K) are shifted, as compared to the non-deuterated compound, towards the lower temperature of ca. 8 and 5 K, respectively. The ClO₄⁻ anions perform fast, picosecond, isotropic reorientation with the activation energy of 6.6 kJ mol⁻¹, which abruptly slow down at T_C1^c phase transition, during sample cooling. The ND₃ ligands perform fast uniaxial reorientation around the Ni-N bond in all three detected phases, with the effective activation energy of 2.9 kJ mol⁻¹. The reorientational motion of ND₃ is only slightly distorted at the T_C1 phase transition due to the dynamical orientational order-disorder process of anions. The low value of the activation energy for the ND₃ reorientation suggests that this reorientation undergoes the translation-rotation coupling, which makes the barrier to the rotation of the ammonia ligands not constant but fluctuating. The phase polymorphism and the dynamics of the molecular reorientations of the title compound are similar but not quite identical with these of the [Ni(NH₃)₆](ClO₄)₂.     

Determination of the enthalpy of fusion of K3TaF8 and K3TaOF6

The areas of the fusion and crystallization peaks of K₃TaF₈ and K₃TaOF₆ have been measured using the DSC mode of the high-temperature calorimeter (SETARAM 1800 K). On the basis of these quantities and the temperature dependence of the used calorimetric method sensitivity, the values of the enthalpy of fusion of K₃TaF₈ at temperature of fusion 1039 K: Δ_fusH_m(K₃TaF₈; 1039 K) = (52 ± 2) kJ mol⁻¹ and of K₃TaOF₆ at temperature of fusion 1055 K: Δ_fusH_m(K₃TaOF₆; 1055 K) = (62 ± 3) kJ mol⁻¹ have been determined.     

Carbon black and propylene oxidation over Ru/CoxMgyAl2Oz catalysts

The effects of Co_xMg_yAl₂O_z mixed oxides composition and ruthenium addition on the oxidation of propylene and carbon black (CB) were investigated. Different reactive cobalt and ruthenium oxide species were formed following calcination at 600 °C. The addition of ruthenium was beneficial for the CB oxidation under “loose contact” conditions and for propylene oxidation when the cobalt content was intermediate to low. The calculated activation energy for CB oxidation was decreased from 151 kJ mol⁻¹ for the uncatalyzed reaction to 111 kJ mol⁻¹ over the best catalyst.     

Synthesis, characterization and thermochemistry of K2B5O8(OH)·2H2O

A pure hydrated potassium borate K₂B₅O₈(OH)·2H₂O has been synthesized under mild hydrothermal conditions and characterized by single-crystal X-ray diffraction, XRD, FT-IR, Raman spectra and DTA-TG. The crystal structure consists of two K-O polyhedra and [B₅O₈(OH)]²⁻ polyborate anion. The enthalpy of formation was determined to be −4772.6 ± 4.0 kJ mol⁻¹ by solution calorimetry.     

Ethylene addition to OsO3(CH2) - A theoretical study

Quantum chemical calculations at the B3LYP/TZVP level of theory have been carried out for the initial steps of the addition reaction of ethylene to OsO₃(CH₂). The calculations predict that there are two reaction channels with low activation barriers. The kinetically and thermodynamically most favored reaction is the [3+2]_O, C addition which has a barrier of only 2.3 kcal mol⁻¹. The [3+2]_O, O addition has a slightly higher barrier of 6.5 kcal mol⁻¹. Four other reactions of OsO₃(CH₂) with C₂H₄ have significantly larger activation barriers. The addition of ethylene to one oxo group with concomitant migration of one hydrogen atom from ethylene to the methylene ligand yields thermodynamically stable products but the activation energies for the reactions are 16.7 and 20.9 kcal mol⁻¹. Even higher barriers are calculated for the [2+2] addition to the OsO bond (32.6 kcal mol⁻¹) and for the addition to the oxygen atom yielding an oxiran complex (41.2 kcal mol⁻¹). The activation barriers for the rearrangement to the bisoxoosmaoxirane isomer (36.3 kcal mol⁻¹) and for the addition reactions of the latter with C₂H₄ are also quite high. The most favorable reactions of the cyclic isomer are the slightly exothermic [2+2] addition across the OsO bond which has an activation barrier of 46.6 kcal mol⁻¹ and the [3+2]_O, O addition which is an endothermic process with an activation barrier of 44.3 kcal mol⁻¹.     

Iodomethane oxidative addition and CO migratory insertion in monocarbonylphosphine complexes of the type [Rh((C6H5)COCHCO((CH2)nCH3))(CO)(PPh3)]: Steric and electronic effects

The chemical kinetics, studied by UV/Vis, IR and NMR, of the oxidative addition of iodomethane to [Rh((C₆H₅)COCHCOR)(CO)(PPh₃)], with R = (CH₂)_nCH₃, n = 1-3, consists of three consecutive reaction steps that involves isomers of two distinctly different classes of Rh^III-alkyl and two distinctly different classes of Rh^III-acyl species. Kinetic studies on the first oxidative addition step of [Rh((C₆H₅)COCHCOR)(CO)(PPh₃)] + CH₃I to form [Rh((C₆H₅)COCHCOR)(CH₃)(CO)(PPh₃)(I)] revealed a second order oxidative addition rate constant approximately 500-600 times faster than that observed for the Monsanto catalyst [Rh(CO)₂I₂]⁻. The reaction rate of the first oxidative addition step in chloroform was not influenced by the increasing alkyl chain length of the R group on the β-diketonato ligand: k₁ = 0.0333 ([Rh((C₆H₅)COCHCO(CH₂CH₃))(CO)(PPh₃)]), 0.0437 ([Rh((C₆H₅)COCHCO(CH₂CH₂CH₃))(CO)(PPh₃)]) and 0.0354 dm³ mol⁻¹ s⁻¹ ([Rh((C₆H₅)COCHCO(CH₂CH₂CH₂CH₃))(CO)(PPh₃)]). The pK_a^′ and keto-enol equilibrium constant, K_c, of the β-diketones (C₆H₅)COCH₂COR, along with apparent group electronegativities, χ_R of the R group of the β-diketones (C₆H₅)COCH₂COR, give a measurement of the electron donating character of the coordinating β-diketonato ligand: (R, pK_a^′, K_c, χ_R) = (CH₃, 8.70, 12.1, 2.34), (CH₂CH₃, 9.33, 8.2, 2.31), (CH₂CH₂CH₃, 9.23, 11.5, 2.41) and (CH₂CH₂CH₂CH₃, 9.33, 11.6, 2.22).     

Thermodynamic properties of hydrated sodium l-threonate Na(C4H7O5)·H2O(s)

Low-temperature heat capacities of the compound Na(C₄H₇O₅)·H₂O(s) have been measured with an automated adiabatic calorimeter. A solid-solid phase transition and dehydration occur at 290-318 K and 367-373 K, respectively. The enthalpy and entropy of the solid-solid transition are Δ_transH_m = (5.75 ± 0.01) kJ mol⁻¹ and Δ_transS_m = (18.47 ± 0.02) J K⁻¹ mol⁻¹. The enthalpy and entropy of the dehydration are Δ_dH_m = (15.35 ± 0.03) kJ mol⁻¹ and Δ_dS_m = (41.35 ± 0.08) J K⁻¹ mol⁻¹. Experimental values of heat capacities for the solids (I and II) and the solid-liquid mixture (III) have been fitted to polynomial equations.     

Calorimetric study and thermal analysis of [Gd4/3Y2/3(Gly)6(H2O)4](ClO4)6·5H2O and [ErY(Gly)6(H2O)4](ClO4)6·5H2O (Gly: glycin)

Two solid-state coordination compounds of rare earth metals with glycin, [Gd_4/3Y_2/3(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O and [ErY(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O were synthesized. The low-temperature heat capacities of the two coordination compounds were measured with an adiabatic calorimeter over the temperature range from 78 to 376 K. [Gd_4/3Y_2/3(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O melted at 342.90 K, while [ErY(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O melted at 328.79 K. The molar enthalpy and entropy of fusion for the two coordination compounds were determined to be 18.48 kJ mol⁻¹ and 53.9 J K⁻¹ mol⁻¹ for [Gd_4/3Y_2/3(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O, 1.82 kJ mol⁻¹ and 5.5 J K⁻¹ mol⁻¹ for [ErY(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O, respectively. Thermal decompositions of the two coordination compounds were studied through the thermogravimetry (TG). Possible mechanisms of the decompositions are discussed.