Effect of amine functionalization of spherical MCM-41 and SBA-15 on controlled drug release

MCM-41 and SBA-15 silica materials with spherical morphology and different particle sizes were synthesized and modified by post-synthesis method with 3-aminopropyltriethoxysilane (APTES). A comparative study of the adsorption and release of a model drug, ibuprofen, were carried out. The modified and drug loaded mesoporous materials were characterized by XRD, TEM, N₂ physisorption, thermal analysis, elemental analysis and FT-IR spectroscopy. Surface modification with amino groups resulted in high degree of ibuprofen loading and slow rate of release for MCM-41, whereas it was the opposite for SBA-15. The adsorbed drug content and the delivery rate can be predetermined by the choice of mesoporous material with the appropriate structural characteristics and surface functionality.     

Influence of mesoporous structure type on the controlled delivery of drugs: release of ibuprofen from MCM-48, SBA-15 and functionalized SBA-15

Ordered mesoporous materials exhibit potential features to be used as controlled drug delivery systems, including their wide range of chemical compositions and their outstanding textural and structural properties. Therefore, it is possible to control the drug release kinetics by tailoring such parameters. In this paper, mesoporous materials such as MCM-48 and SBA-15, which present different pore sizes (3.7 and 8.8 nm) and structural characteristics (3D-bicontinuous cubic and 2D-hexagonal, respectively) have been synthesized to evaluate their application as drug delivery system and to determine their influence on release kinetic of ibuprofen. Moreover, a chemical modification of the SBA-15 mesoporous material with octadecyltrimethoxysilane has also been performed to study its influence on the release rate of ibuprofen. The structural characteristics (3D cubic and 2D hexagonal pore system) do not affect the release kinetic profiles of ibuprofen. On the contrary, the pore size affects highly to the release kinetic profiles from first-order kinetic to zero-order kinetic for MCM-48 and SBA-15, respectively. Moreover, the importance of surface functionalization was demonstrate through the very fast delivery of ibuprofen from SBA-15 mesoporous materials functionalized with octadecyl chains.     

Functionalized silica matrices for controlled delivery of cephalexin

The surface of SBA-15 ordered mesoporous silica was functionalized with sulphonic and amine functional groups to determine the effect of changes in surface acidity on cephalexin adsorption and subsequent release. Cephalexin (CPX), which belongs to the group of cephalosporins or β-lactam antibiotics, was impregnated on functionalized SBA-15. The functionalized silica materials were characterized by SEM, TGA, FTIR and N₂ adsorption, and an in vitro drug delivery test was performed. SEM micrographs showed the packed cylinders correspond to SBA 15 materials. Likewise, N₂ adsorption–desorption isotherms demonstrated that the SBA-15 structure was obtained when IV-type isotherms were displayed. The inalterable stabilization of the drug was confirmed by FTIR spectroscopy. For all the samples studied, the delivery profiles exhibit two steps. A fast initial stage was obtained over the first 5 h, followed by a slower one. Regarding this second stage, the time needed to attain a plateau was undoubtedly altered by the surface functionalization.     

Synthesis and characterization of surface modified SBA-15 silica materials and their application in chromatography

Hexagonally ordered SBA-15 mesoporous silica spheres with large uniform pore diameters are obtained using the triblock copolymer, Pluronic P123, as template with a cosurfactant cetyltrimethylammonium bromide (CTAB) and the cosolvent ethanol in acidic media. A series of surface modified SBA-15 silica materials is prepared in the present work using mono- and trifunctional alkyl chains of various lengths which improves the hydrothermal and mechanical stability. Several techniques, such as element analysis, nitrogen sorption analysis, small angle X-ray diffraction, scanning electron microscopy (SEM), FTIR, solid-state (29)Si and (13)C NMR spectroscopy are employed to characterize the SBA-15 materials before and after surface modification with the organic components. Nitrogen sorption analysis is performed to calculate specific surface area, pore volume and pore size distribution. By surface modification with organic groups, the mesoporous SBA-15 silica spheres are potential materials for stationary phases in HPLC separation of small aromatic molecules and biomolecules. The HPLC performance of the present SBA-15 samples is therefore tested by means of a suitable test mixture.     

Synthesis of carboxyl-modified rod-like SBA-15 by rapid co-condensation

Carboxyl-modified SBA-15 rod-like mesoporous materials have been synthesized by a facile rapid co-condensation of tetraethylorthosilicate (TEOS) and 2-cyanoethyltriethoxysilane (CTES), followed by hydrolysis of cyanide groups in sulfuric acid. The concentration of carboxylic groups was varied by changing the silica source ratio of CTES/TEOS from 0.05 to 0.3. X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) showed that the uniform ordered mesoporous structure and rod-like morphology of SBA-15 have been preserved even at the high concentration of carboxylic groups employed. Characterization by Fourier transformed infrared spectroscopy (FTIR), solid-state NMR investigation indicated that carboxylic groups have been successfully grafted onto the surface of SBA-15 through siloxane bonds [(O(3))SiCH(2)CH(2)COOH. The negative charges of the modified SBA-15 materials were enhanced by the presence of the carboxylic groups on the surface. The capacity of lysozyme adsorption of the modified SBA-15 materials were found to be significantly improved as compared with pure silica SBA-15. The maximum amount of lysozyme adsorption on carboxyl-modified was increased with the pH of solution increased from 5.5 to 9.0.     

Submicron particles of SBA-15 modified with MgO as carriers for controlled drug delivery

Submicron particles with modified surface were synthesized by a simple one-pot synthesis approach and used as drug carrier for controlled release. Due to the alkalinity of MgO species on the surface, the amount of a model drug, ibuprofen, adsorbed on the modified surface was increased as compared to pure silica SBA-15 although the surface area was decreased by the surface modification. FTIR investigation indicated that the adsorption state of ibuprofen on MgO modified SBA-15 was different from that on pure silica SBA-15 and pure crystal ibuprofen. The result obtained from in vitro release test exhibited that the surface modification greatly decreased the ibuprofen release rate. In first 6 h in vitro release test, only 63% of the adsorbed ibuprofen was released from the MgO/SBA-15 (Si/Mg=20). In contrast, the release of ibuprofen was complete in 1 h from the pure silica SBA-15 under the same release conditions. The surface modified with MgO created affinity with acidic ibuprofen molecules and retarded the release rate from the mesoporous matrix. In addition, the release rate of ibuprofen could be modulated by varying the content of MgO, and was found to decrease with increasing amount of MgO on surface of SBA-15 submicron particles.     

Luminescence functionalization of SBA-15 by YVO4:Eu3+ as a novel drug delivery system

Luminescence functionalization of the ordered mesoporous SBA-15 silica was realized by depositing a YVO4:Eu3+ phosphor layer on its surface via the Pechini sol-gel process, resulting in the formation of the YVO4:Eu3+@SBA-15 composite material. This material, which combines the mesoporous structure of SBA-15 and the strong red luminescence property of YVO4:Eu3+, can be used as a novel functional drug delivery system. The structure, morphology, porosity, and optical properties of the materials were well characterized by X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, N2 adsorption, and photoluminescence spectra. As expected, the pore volume, surface area, and pore size of SBA-15 decrease in sequence after deposition of the YVO4:Eu3+ layer and the adsorption of ibuprofen (IBU, drug). The IBU-loaded YVO4:Eu3+@SBA-15 system still shows the red emission of Eu3+ (617 nm, 5D0-7F2) under UV irradiation and the controlled drug release property. Additionally, the emission intensity of Eu3+ increases with an increase in the cumulative released amount of IBU in the system, making the extent of drug release easily identifiable, trackable, and monitorable by the change of luminescence. The system has great potential in the drug delivery and disease therapy fields.     

Direct synthesis and catalytic applications of ordered large pore aminopropyl-functionalized SBA-15 mesoporous materials

SBA-15 mesoporous silica has been functionalized with aminopropyl groups through a simple co-condensation approach of tetraethyl orthosilicate (TEOS) and (3-aminopropyl)triethoxysilane (APTES) using amphiphilic block copolymers under acidic conditions. The organic-modified SBA-15 materials have hexagonal crystallographic order, pore diameter up to 60 A, and the content of aminopropyl groups up to 2.3 mmol g(-1). The influences of TEOS prehydrolysis period and APTES concentration on the crystallographic order, pore size, surface area, and pore volume were examined. TEOS prehydrolysis prior to the addition of APTES was found essential to obtain well-ordered mesoporous materials with amino functionality. The amount of APTES incorporated in the silica framework increased with the APTES concentration in the synthesis gel, while the ordering of the mesoporous structure gradually decreased. Analysis with TG, IR, and solid state NMR spectra demonstrated that the aminopropyl groups incorporated in SBA-15 were not decomposed during the preparation procedure and the surfactant P123 was fully removed through ethanol extraction. The modified SBA-15 was an excellent base catalyst in Knoevenagel and Michael addition reactions.     

Sorptive properties of aluminium ions containing mesoporous silica towards <Emphasis Type="SmallCaps">l</Emphasis>-histidine

The applicability of aluminium-containing mesoporous materials as carriers for l-histidine has been evaluated for the first time. The modified mesoporous silica such as SBA-15 and SBA-16 were synthesised by hydrothermal method and characterised by low-temperature nitrogen sorption, transmission and scanning microscopy, X-ray and laser diffraction methods. The results of these studies confirmed the ordered mesoporous structures of all materials obtained. The modification of mesoporous materials with aluminium ions changed the textural parameters and particle size distribution relative to those in the pristine material. Aluminium-modified SBA-15 exhibited higher release rate of amino acid than the pure material. The opposite phenomenon was observed when l-His was released from pristine and modified SBA-16 materials. The kinetics of amino acid release from all mesoporous materials followed the Korsmeyer–Peppas model. The results proved that the structural parameters of mesoporous materials and the percentage content of aluminium strongly influenced the release rate of l-His.     

铝修饰改性对SBA-15分子筛性质及催化剂性能的影响

分别采用调变pH值合成法和后处理嫁接法制备了铝修饰改性的SBA-15分子筛,通过XRD、Al核磁、N₂吸附脱附、NH₃-TPD等方法对改性分子筛的理化性质进行了分析表征,考察了不同的Al修饰改性方法对分子筛性质和加氢裂化催化剂性能的影响。结果表明,调变pH值合成法能够有效地对SBA-15进行Al改性,得到的Al-SBA-15分子筛具有高度有序的六方孔道结构,较好的水热稳定性。Al的引入提高了SBA-15的表面酸性,并使其在加氢裂化反应中表现出较好的中油选择性。     

Mesoporous SBA-15 materials modified with PW or W active species as catalysts for the epoxidation of olefins with H<Subscript>2</Subscript>O<Subscript>2</Subscript>

Five catalysts containing PW or W active species that anchored onto aminosilylated mesoporous silica SBA-15 by a post-grafting route were prepared and the resulting PW or W/APTES/SBA-15 hybrid materials were characterized by XRD, N₂ adsorption/desorption, surface area analysis, TEM, FT-IR, and ICP (inductively coupled plasma atomic emission spectroscopy). The names of these catalysts have been abbreviated as SBA-15m-a, SBA-15m-b, SBA-15m-c, SBA-15m-d, and SBA-15m-e according to the different active species. The PW or W active species were highly dispersed in the channels of the modified mesoporous materials. The interaction between PW or W species and amino groups grafted on the channel surface of SBA-15 led to the immobilization of PW or W species. Their catalytic activity in the epoxidation of cyclooctene with H₂O₂ as oxidant was investigated. Among them, SBA-15m-a showed the best performance, with 98.9% conversion and 98.4% selectivity. The catalyst could be reused for six times with a little decrease in activity.     

甲基丙烯酸甲酯在改性介孔分子筛SBA-15孔道中的溶液聚合

水热法合成了介孔分子筛SBA-15,分别用硅烷偶联剂KH-151,KH-560和KH-570对SBA-15进行了改性,将不同类型的改性介孔分子筛(M-SBA-15)作为"微反应器",把含MMA的甲苯溶液载入到"微反应器"中,通过溶液聚合法使得MMA在孔道内部形成聚合物.通过XRD,FTIR,N2吸附/脱附,GPC,1H-NMR,TG和DSC测试手段对M-SBA-15和PMMA/M-SBA-15复合材料以及孔道内PMMA进行了分析测试.研究表明,改性介孔分子筛仍保留了有序介孔材料的基本特性,M-SBA-15和相应的复合材料的比表面积、孔径以及孔容降低,表明PMMA载入到介孔分子筛的孔道中.与传统的溶液聚合所得的PMMA相比,介孔孔道内所得的PMMA的分子链的间规立构度有所提高,其分子量约为传统溶液聚合的十几倍,初始热稳定性明显提高,玻璃化转变温度提高9～11℃.此外,KH-151改性SBA-15载入最多的PMMA,所得的PMMA的分子量和玻璃化转变温度最高.     

Influence of the pore structure of MCM-41 and SBA-15 silica fibers on atomic layer chemical vapor deposition of cobalt carbonyl

Mesoporous high surface area MCM-41 and SBA-15 type silica materials with fibrous morphology were synthesized and used as support materials for the ALCVD (atomic layer chemical vapor deposition) preparation of Co/MCM-41 and Co/SBA-15 catalysts. Co/MCM-41 and Co/SBA-15 catalysts were prepared by deposition of Co2(CO)8 from the gas phase onto the surfaces of preheated support materials in a fluidized bed reactor. For both silica materials, two different kinds of preparation methods, direct deposition and a pulse deposition method, were used. Pure silica supports as well as supported cobalt catalysts were characterized by various spectroscopic (IR) and analytical (X-ray diffraction, Brunauer-Emmett-Teller, elemental analysis) methods. MCM-41 and SBA-15 fibers showed considerable ability to adsorb Co2(CO)8 from the gas phase. For MCM-41 and SBA-15 silicas, cobalt loadings of 13.7 and 12.1 wt % were obtained using the direct deposition method. The cobalt loadings increased to 23.0 and 20.7 wt % for MCM-41 and SBA-15 silicas, respectively, when the pulse deposition method was used. The reduction behavior of silica-supported cobalt catalysts was found to depend on the catalyst preparation method and on the mesoporous structure of the support material. Almost identical reduction properties of SBA-15-supported catalysts prepared by different deposition methods are explained by the structural properties of the mesoporous support and, in particular, by the chemical structure of the inner surfaces and walls of the mesopores. Pulse O2/H2 chemisorption experiments showed catalytically promising redox properties and surface stability of the prepared MCM-41- and SBA-15-supported cobalt catalysts.     

纯硅介孔分子筛SBA-15表面的手性移植

聚环氧乙烯醚-聚环氧丙烯醚-聚环氧乙烯醚(EO20PO70EO20)三嵌段高分子为模板剂制备了SBA-15分子筛. 用3-氨丙基-三乙氧基硅烷对SBA-15进行改性, 改性后SBA-15表面上的氨基再与(+)-O,O'-二苯甲酰基-L-酒石酸酐(DBTA)进行酰化反应, 以酰胺键将该手性羧酸连接在SBA-15表面上. XRD和氮气吸附结果表明, 材料经过处理后仍然保持良好的孔性质; 13C和29Si魔角旋转核磁共振(MAS NMR)谱图表明, SBA-15与氨丙基化合物的作用是共价成键, 表面修饰度达25%; 从傅里叶变换红外(FTIR) 光谱可见, 有部分修饰氨基与DBTA成功地进行了酰化反应, 以一个羧基裸露的形式将该二元羧酸化合物连接在表面上; 从孔径分布图可知, 胺丙基修饰之后孔减小了1.5 nm, 与DBTA修饰后孔尺寸又减少0.5 nm, 说明胺丙基化合物是头对头垂直连接在Si表面上, 而酒石酸分子是采取平行方式侧卧在氨基表面.     

Substantiating the influence of pore surface functionalities on the stability of Grubbs catalyst in mesoporous SBA-15 silica

The influence of pore surface functionalities in mesoporous SBA-15 silica on the stability of a model olefin metathesis catalyst, namely Grubbs I, is substantiated. In particular, it is demonstrated that the nature of the interaction between the ruthenium complex and the surface is strongly depending on the presence of surface silanols. For this study, differently functionalized mesoporous SBA-15 silica materials were synthesized according to standard procedures and, subsequently, the Grubbs I catalyst was incorporated into these different host materials. All of the materials were thoroughly characterized by elemental analyses, nitrogen physisorption at -196 °C, thermogravimetric analyses, solid-state NMR spectroscopy, and infrared spectroscopy (ATR-IR). By such in-depth characterization of the materials, it became possible to achieve models for the surface/catalyst interactions as a function of surface functionalities in SBA-15; for example, in the case of purely siliceous silanol-rich SBA-15, octenyl-silane modified SBA-15, and silylated equivalents. It was evidenced that large portions of the chemisorbed species that are detected spectroscopically arise from interactions between the tricyclohexylphosphine and the surface silanols. A catalytic study using diethyldiallylmalonate in presence of the various functionalized silicas shows that the presence of surface silanols significantly decreases the longevity of the ring-closing metathesis catalyst, whereas the passivation of the surface by trimethylsilyl groups slows down the catalysis rate, but does not affect significantly the lifetime of the catalyst. This contribution thus provides new insights into the functionalization of SBA-15 materials and the role of surface interactions for the grafting of organometallic complexes.     

Pt-doped semiconductive oxides loaded on mesoporous SBA-15 for gas sensing

SBA-15-based solids combining semiconductive oxides (Sn and In) and noble metal (Pt) were prepared by an incipient wet impregnation method in order to obtain materials for gas sensing. The materials were characterized by XRD, BET adsorption, SEM, and TEM. The BET analysis allowed obtaining details about the specific surface areas, pore size, and modifications due to the indium and/or tin oxides followed by the Pt deposition. XRD data revealed that In₂O₃ did not enter the mesopores of SBA-15, preventing also the entrance of the Pt nanoparticles in the mesopores. On the other hand, SnO₂ nanoparticles further doped with Pt could enter the mesoporous network, affording a SBA-15 material loaded with SnO₂ and very small Pt nanoparticles with high dispersion. Tablets obtained by pressing the modified SBA-15 were tested as sensitive materials for propene and hydrogen detection.     

Adsorption and structural properties of channel-like and cage-like organosilicas

Channel-like and cage-like mesoporous silicas, SBA-15 (P6mm symmetry group) and SBA-16 (Im3m symmetry group), were modified by introducing single ureidopropyl surface groups, mixed ureidopropyl and mercaptopropyl surface groups, and single bis(propyl)disulfide bridging groups. These hexagonal and cubic organosilicas were prepared under acidic conditions via co-condensation of tetraethyl orthosilicate (TEOS) and proper organosilanes using poly(ethylene oxide)-block-poly(propylene oxide)-block-poly(ethylene oxide) amphiphilic block copolymer templates, P123 (EO₂₀PO₇₀EO₂₀) and F127 (EO₁₀₆PO₇₀EO₁₀₆). The modified SBA-15 and SBA-16 materials were synthesized by varying the molar ratio of organosilane to TEOS in the initial synthesis gel. The removal of polymeric templates, P123 and F127, was performed with ethanol/hydrochloric acid solution. In the case of SBA-15 the P123 template was fully extracted, whereas this extraction process was less efficient for the removal of F127 template from the SBA-16-type organosilicas; in the latter case a small residue of F127 was retained. The adsorption and structural properties of the resulting materials were studied by nitrogen adsorption-desorption isotherms at −196^∘C (surface area, pore size distribution, pore volumes), powder X-Ray diffraction, CHNS elemental analysis and high-resolution thermogravimetry. The structural ordering, the BET specific surface area, pore volume and pore size decreased for both channel-like and cage-like mesoporous organosilicas with increasing concentration of incorporated organic groups.     

C60/SBA-15介孔复合材料的合成及其荧光性质的研究

通过对介孔SBA-15孔壁氨基化(SBA-15-NH₂),然后与C₆₀反应形成化学键,成功地将C₆₀组装进入SBA-15孔道中,合成了C₆₀/SBA-15介孔复合材料.通过X射线衍射(XRD)、红外光谱(FTIR)、紫外-可见光谱(UV-V is)和差热-热重分析(TG-DTA)等方法对其进行了表征.同时,对复合材料的荧光性质进行了研究.结果发现,SBA-15-NH₂在575 nm处出现发射峰,C₆₀/SBA-15介孔复合材料在554 nm处出现发射峰,峰位蓝移21 nm.     

SBA-15负载Pd催化剂的制备及其在Heck反应中的应用研究

利用水热反应制备了表面离子液体功能化的SBA-15介孔材料,在丙酮溶液中与氯化钯反应,然后使用水合肼在乙醇中还原.测试了这种催化剂在Mizoroki-Heck反应中的催化活性.与直接负载在SBA-15上的钯催化剂相比,这种表面修饰的介孔SBA-15负载催化剂表现出更高的催化活性、可回收性和反应稳定性.氮气吸脱附实验和小角XRD衍射实验表明,在合成中,材料的介孔性能并没有被破坏.透视电镜也表征了该材料的表面形貌.最后,Mizoroki-Heck反应表明该催化剂具有很高的催化活性,且循环五次后,其催化活性降低并不明显.     

Preparation and application of nanocatalysts via surface functionalization of mesoporous materials

Surface immobilization of active species onto mesoporous materials is gaining importance, especially in the design of functionalized mesoporous materials as a nanocatalyst through heterogenization of homogeneous catalytic systems. This article summarizes recent work on the synthesis, characterization and catalytic performance of the functionalized mesoporous catalysts performed by the present authors. A cationic rhenium(I) complex was encapsulated into mesoporous Al-MCM-41 molecular sieve using a ion-exchange method, yielding a new photocatalyst to be active for photocatalytic reduction of CO₂. Surface functionalization of mesoporous silica SBA-15 with sulfonic acid groups was investigated to give a solid acid catalyst. The chemically modified Fe-containing mesoporous materials, which are active for hydroxylation of phenol, were prepared by a surface-grafting method that iron salts are immobilized onto mesoporous Si-MCM-41 with the help of 3-aminopropyltrimethoxysilane as a linker. A cobalt(III) complex was heterogenized onto mesoporous silica SBA-15 containing carboxylic groups in order to utilize as a solid catalyst for the liquid-phase oxidation of aromatic hydrocarbons.