The character of W-doped one-dimensional VO2 (M)

The one-dimensional W-doped VO₂ (M) solid solutions with a various doped content were successfully synthesized under hydrothermal condition and subsequent calcination for the first time, and physical-chemical and phase transformation character were explored, subsequently. DSC analyses displayed that the phase-transition temperature of VO₂ (M) solid solution could be linearly tuned with the doped content. Promisingly, the one-dimensional W-doped VO₂ (M) had a good thermochromic property.     

New open-framework in the uranyl vanadates A3(UO2)7(VO4)5O (A=Li, Ag) with intergrowth structure between A(UO2)4(VO4)3 and A2(UO2)3(VO4)2O

New uranyl vanadates A₃(UO₂)₇(VO₄)₅O (M=Li (1), Na (2), Ag (3)) have been synthesized by solid-state reaction and their structures determined from single-crystal X-ray diffraction data for 1 and 3. The tetragonal structure results of an alternation of two types of sheets denoted S for _∞²[UO₂(VO₄)₂]⁴⁻ and D for _∞²[(UO₂)₂(VO₄)₃]⁵⁻ built from UO₆ square bipyramids and connected through VO₄ tetrahedra to _∞¹[U(3)O₅-U(4)O₅]⁸⁻ infinite chains of edge-shared U(3)O₇ and U(4)O₇ pentagonal bipyramids alternatively parallel to a- and b-axis to construct a three-dimensional uranyl vanadate arrangement. It is noticeable that similar _∞[UO₅]⁴⁻ chains are connected only by S-type sheets in A₂(UO₂)₃(VO₄)₂O and by D-type sheets in A(UO₂)₄(VO₄)₃, thus A₃(UO₂)₇(VO₄)₅O appears as an intergrowth structure between the two previously reported series. The mobility of the monovalent ion in the mutually perpendicular channels created in the three-dimensional arrangement is correlated to the occupation rate of the sites and by the geometry of the different sites occupied by either Na, Ag or Li. Crystallographic data: 293 K, Bruker X8-APEX2 X-ray diffractometer equipped with a 4 K CCD detector, MoKα, λ=0.71073 Å, tetragonal symmetry, space group P4¯m2, Z=1, full-matrix least-squares refinement on the basis of F²; 1,a=7.2794(9) Å, c=14.514(4) Å, R1=0.021 and wR2=0.048 for 62 parameters with 782 independent reflections with I?2σ(I); 3, a=7.2373(3) Å, c=14.7973(15) Å, R1=0.041 and wR2=0.085 for 60 parameters with 1066 independent reflections with I?2σ(I).     

Ba2(VO2)(PO4)(HPO4)·H2O, a New Barium Vanadium(V) Phosphate Hydrate Containing Trigonal Bipyramidal VO5Groups

The hydrothermal synthesis, single crystal structure, and some physical properties of Ba₂(VO₂)(PO₄)(HPO₄)·H₂O, a new barium vanadium(V) phosphate hydrate, are reported. This phase is built up from one-dimensional chains of unusual VO₅trigonal bipyramids and (H)PO₄tetrahedra, fused together via V–O–P linkages. These anionic chains propagate along the polar [010] direction. 11-Coordinate barium cations and water molecules occupy the interchain regions and link the chains together. Structural data for this phase and other known barium vanadium phosphates are briefly compared. Crystal data: Ba₂(VO₂)(PO₄)(HPO₄)·H₂O,M_r=566.57, monoclinic, space groupP2₁(No. 4),a=5.0772(5) Å,b=8.724(2) Å,c=10.806(1) Å,β=90.795(8)°,V=478.6(1) ų,Z=2,R=2.65%,R_w=2.89% [147 parameters, 1893 observed reflections withI>3σ(I)].     

Ba3 (VO4)2-K2 Ba(MoO4)2 and Pb3 (VO4)2-K2 Pb(MoO4)2 systems

Phase equilibria in the Ba₃(VO₄)₂-K₂Ba(MoO₄)₂ and Pb3(VO₄)₂-K₂Pb(MoO₄)₂ systems have been investigated. In the first system, a continuous series of substitutional solid solutions with the palmierite structure is formed, and in the second one, the polymorphic transition in lead orthovanadate at 100°C restricts the extent of the palmierite-type solid solution to 10–100 mol % K₂Pb(MoO₄)₂. Original Russian Text ? V.D. Zhuravlev, Yu.A. Velikodnyi, A.S. Vinogradova-Zhabrova, A.P. Tyutyunnik, V.G. Zubkov, 2008, published in Zhurnal Neorganicheskoi Khimii, 2008, Vol. 53, No. 10, pp. 1746–1748.     

Hydrothermal synthesis, characterization and thermochemistry of Ca2[B2O4(OH)2]·0.5H2O

A pure calcium borate Ca₂[B₂O₄(OH)₂]·0.5H₂O has been synthesized under hydrothermal condition and characterized by XRD, FT-IR and TG as well as by chemical analysis. The molar enthalpy of solution of Ca₂[B₂O₄(OH)₂]·0.5H₂O in HC1·54.582H₂O was determined. From a combination of this result with measured enthalpies of solution of H₃BO₃ in HC1·54.561H₂O and of CaO in (HCl + H₃BO₃) solution, together with the standard molar enthalpies of formation of CaO(s), H₃BO₃(s) and H₂O(l), the standard molar enthalpy of formation of −(3172.5 ± 2.5) kJ mol⁻¹ of Ca₂[B₂O₄(OH)₂]·0.5H₂O was obtained.     

Unexpected phase transformation from VO2(R) to VO2(A) during hydrothermal treatment in the V2O5�CH2C2O4�CH2O system

Vanadium dioxide (VO₂) was directly synthesized via the reduction of V₂O₅ with oxalic acid adopting two different types of hydrothermal processes in the temperature ranging from 180 to 260 °C. The products were characterized by X-ray diffraction, field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). In all these processes, the VO₂(B) phase was first formed at a relative lower temperature or the initial stage at higher temperature and then it transformed to the VO₂(R) phase with the increase of temperature. The building-block-stacking mechanism was proposed to elucidate the transformation from VO₂(B) nano-plates to snowflake-like VO₂(R) powders. During this transformation, no trace of the VO₂(A) phase was observed when one-step hydrothermal treatment method was used, whereas some part of the branches of the snowflake-like VO₂(R) particles transformed to metastable VO₂(A) nanofibers in the autoclave during cooling process when the two-step hydrothermal treatment method was conducted. The reason for this transformation can be contributed to the defects formed during the stacking process.     

Syntheses of TiO2(B) nanowires and TiO2 anatase nanowires by hydrothermal and post-heat treatments

TiO₂(B) nanowires and TiO₂ anatase nanowires were synthesized by the hydrothermal processing in 10 M NaOH aq. at 150 °C followed by the post-heat treatment at 300-800 °C. As-synthesized Na-free titanate nanowires (prepared by the hydrothermal treatment and repeated ion exchanging by HCl (aq.) were transformed into TiO₂(B) structure with maintaining 1-D morphology at 300-500 °C, and further transformed into anatase structure at 600-800 °C with keeping 1-D shape. At 900 °C, they transformed into rod-shaped rutile grains. Microstructure of these 1-D TiO₂ nanomaterials is reported.     

Hydrothermal synthesis and luminescent properties of Sb-doped Sr3(PO4)2

Sb³⁺-doped Sr₃(PO₄)₂ crystals has been synthesized using phosphoric acid, strontium hydroxide and antimony powder as the raw materials through a hydrothermal reaction method. The crystallinity and the microstructure were investigated using X-ray diffraction and scanning electron microscopy. The photoluminescent property was investigated using luminescent spectrometer. Phase pure Sr₃(PO₄)₂ crystal was obtained and it has a shape of hexagonal rod. It showed the emission and excitation peaks at 396, 250, and 215 nm, respectively, indicating that the emission is attributed to ³P₁-¹S₀ transition and the excitation is attributed to ¹S₀-³P₁ and ¹S₀-¹P₁ transition. It was also observed that the intensity of photoluminescence is thermally stable up to 673 K.     

Isomorphism and phase diagram of the Pb5(PO4)3Cl-Pb5(VO4)3Cl system

Compounds of composition Pb₅(P _x V_1−x O₄)₃Cl (0 ≤ x ≤ 1), which are synthetic analogues of minerals pyromorphite, vanadinite, and endlichite, were synthesized for the first time by high-temperature solid-phase reactions. X-ray diffraction and IR spectroscopy were used to determine the structure of the compounds and revealed complete miscibility in the solid phase of the Pb₅(PO₄)₃Cl-Pb₅(VO₄)₃Cl binary system. Adiabatic reaction calorimetry was used to determine standard enthalpies of mixing and formation and showed that the regular solutions model is applicable to the Pb₅(PO₄)₃Cl-Pb₅(VO₄)₃Cl system. Differential thermal analysis in tandem with high-temperature X-ray diffraction was used to study the phase diagram and characterize phase transitions.     

Facile synthesis of Montroseite VOOH, Paramontroseite VO2 and V2O3-VO2 carbonaceous core-shell microspheres

Hydrothermal carbonization of sucrose was used to controllably synthesize Montroseite VOOH and Paramontroseite VO₂ nanoparticles carbonaceous core-shell microspheres. After calcinations, V₂O₃-VO₂-C core-shell microspheres were obtained. When they were used as cathode materials in lithium-ion battery (LIB), it was found that Montroseite VOOH carbonaceous core-shell microspheres exhibited higher discharge capacity than Paramontroseite VO₂ counterpart, while the content of V₂O₃ had some large effects on the electrochemical properties of V₂O₃-VO₂C core-shell microspheres.     

Low-temperature heat capacity and standard enthalpy of formation of neodymium glycine perchlorate complex [Nd2(Gly)6(H2O)4](ClO4)6·5H2O

Rare-earth perchlorate complex coordinated with glycine [Nd₂(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O was synthesized and its structure was characterized by using thermogravimetric analysis (TG), differential thermal analysis (DTA), chemical analysis and elementary analysis. Its purity was 99.90%. Heat capacity measurement was carried out with a high-precision fully-automatic adiabatic calorimeter over the temperature range from 78 to 369 K. A solid-solid phase transformation peak was observed at 256.97 K, with the enthalpy and entropy of the phase transformation process are 4.438 kJ mol⁻¹ and 17.270 J K⁻¹ mol⁻¹, respectively. There is a big dehydrated peak appears at 330 K, its decomposition temperature, decomposition enthalpy and entropy are 320.606 K, 41.364 kJ mol⁻¹ and 129.018 J K⁻¹ mol⁻¹, respectively. The polynomial equations of heat capacity of this compound in different temperature ranges have been fitted. The standard enthalpy of formation was determined to be −8023.002 kJ mol⁻¹ with isoperibol reaction calorimeter at 298.15 K.     

Humidity Sensing Properties of Flower‐Like VO2(B) and VO2(M) Nanostructures

VO₂(B) nanoflowers were synthesized via hydrothermal method, and VO₂(M) nanoflowers were obtained through heat‐transformation. Two sensors based on VO₂(B) and VO₂(M) nanoflowers were fabricated and their humidity characteristics were studied. It was found that these sensors exhibited fast response and recovery, perfect reproducibility and good stability. The VO₂(M) type sensor is more sensitive at high RH and can be used for high humidity detection. On the contrary, the VO₂(B) type sensor has a higher sensitivity at low RH, and can be used for low humidity detection, which is difficult for humidity sensors based on many other semiconductor oxides.     

Transformation of three-connected silicon nets in CaSi2

Up to 40 kbar and 1100°C, CaSi₂ is dimorphic. Trigonal/rhombohedral CaSi₂I (CaSi₂-type structure) with corrugated layers of three-connected Si atoms can be transformed by a high pressure-high temperature treatment into tetragonal CaSi₂II (α-ThSi₂-type structure) with a three-dimensional net of three-connected Si atoms. The silicon net of CaSi₂II is slightly distorted from the topologically simplest tetragonal three-dimensional three-connected net derived on a geometrical basis. In order to correlate crystal chemical with thermochemical data the transformation between both polymorphs of CaSi₂ has been studied at equilibrium and nonequilibrium conditions. The pressure-temperature phase diagram of CaSi₂ has been investigated by X-ray technique in quenched samples. From the slope of the equilibrium line and the change in molar volume the approximate values of the entropy and energy of transformation CaSi₂(I-II) have been determined ΔS = 3.2 e.u., ΔU = 4.9 kcal/mole. Under nonequilibrium conditions the transformation CaSi₂(II-I) yielded ΔH = ?4.2 kcal/mole at 500°C and ambient pressure in a DTA apparatus. Complete transformation of metastable CaSi₂II can be achieved within 5 min at a heating rate of 20°C/min. Due to the relatively high speed of transformation simple structural relations between both polymorphs of CaSi₂ are discussed.     

Energetics of copper diphosphates – Cu2P2O7 and Cu3(P2O6OH)2

Differential scanning calorimetry and high temperature oxide melt solution calorimetry are used to study enthalpy of phase transition and enthalpies of formation of Cu₂P₂O₇ and Cu₃(P₂O₆OH)₂. α-Cu₂P₂O₇ is reversibly transformed to β-Cu₂P₂O₇ at 338–363 K with an enthalpy of phase transition of 0.15 ± 0.03 kJ mol⁻¹. Enthalpies of formation from oxides of α-Cu₂P₂O₇ and Cu₃(P₂O₆OH)₂ are −279.0 ± 1.4 kJ mol⁻¹ and −538.8 ± 2.7 kJ mol⁻¹, and their standard enthalpies of formation (enthalpy of formation from elements) are −2096.1 ± 4.3 kJ mol⁻¹ and −4302.7 ± 6.7 kJ mol⁻¹, respectively. The presence of hydrogen in diphosphate groups changes the geometry of Cu(II) and decreases acid–base interaction between oxide components in Cu₃(P₂O₆OH)₂, thus decreasing its thermodynamic stability.     

全光谱白光发光二极管用Eu3+掺杂Ca2KZn2(VO4)3黄色荧光粉的制备及光学性能

基于蓝光芯片激发黄色荧光粉或近紫外芯片激发三基色荧光粉构建的白光发光二极管(WLED)在青光区域呈现明显的凹口,导致白光的色彩性能不够理想。为了弥补这一缺陷,实现全光谱白光,我们设计了Eu³⁺掺杂Ca₂KZn₂(VO₄)₃黄色荧光粉,其发射波长范围为400~750 nm。在387 nm激发下,在所制荧光粉中可同时获得来自VO₄^3-基团和Eu³⁺的发射光。Eu³⁺在Ca₂KZn₂(VO₄)₃基质中的最佳掺杂浓度(物质的量分数)为0.05,且VO₄^3-基团向Eu³⁺的能量传递效率达到64.9%。基于变温的发射光谱,揭示了所制荧光粉的热稳定性并发现VO₄^3-基团和Eu³⁺的激活能分别为0.538和0.510 eV。此外,将所制黄色荧光粉与商用蓝色荧光粉和近紫外芯片进行封装整合,得到可发射暖白光的WLED器件,其色温和显色指数分别为3843 K和85.8。     

La(OH)3和 La2O2CO3纳 米 棒 的 合 成 及 其 催 化 Claisen-Schmidt缩合反应性能简

通过调节溶液的pH值,在水热条件下合成出长径比为2-45的La（OH）₃纳米棒. 对水热合成过程中间体的结构演变分析,发现高碱度有利于小尺寸晶核的形成,La（OH）₃晶体结构的各向异性导致这些晶种沿着C轴方向生长,进而形成纳米棒结构. 将La（OH）₃纳米棒前驱体于773 K焙烧可以得到长径比为2-20的La₂O₂CO₃纳米棒. 随着长径比的增加,La₂O₂CO₃纳米棒暴露的（110）晶面逐渐增加,La³⁺-O^2-碱性位的数目也从0.08增加到0.24 mmol/g. 因此,在Claisen-Schmidt缩合反应中,La₂O₂CO₃纳米棒催化剂上的反应速率随着长径比的增加而逐渐增大.     

Raman scattering study on pressure-induced phase transformation of marokite (CaMn2O4)

An in-situ Raman Spectroscopic study was conducted to explore the pressure-induced phase transformation of CaMn₂O₄ to pressures of 73.7 GPa. Group theory yields 24 Raman active modes for CaMn₂O_4, of which 20 are observed at ambient conditions. With the slight compression below 5 GPa, the pressure-induced contraction compensates the structural distortion induced by a Jahn–Teller (JT) effect, resulting in the occurrence of the zero pressure shifts of the JT-related Raman modes. Upon elevation of pressure to nearby 35 GPa, these Raman modes start to display a significant variation in pressure shift, implying the appearance of a pressure-induced phase transformation. Group factor analyses on all possible structure polymorphs indicate that the high-pressure phase is preferentially assigned to an orthorhombic structure, having the CaTi₂O₄ structure. The cooperative JT distortion is continuously reduced in the CaMn₂O₄ polymorph up to 35 GPa. Beyond 35 GPa, it is found that the JT effect was completely suppressed by pressure in the newly formed high-pressure phase. Upon release of pressure, this high-pressure phase transforms to the original CaMn₂O₄ phase, and continuously remains stable to ambient conditions.     

Preparation of a new pyrochlore-type compound Na0.32Bi1.68Ti2O6.46(OH)0.44 by hydrothermal reaction

A new pyrochlore-type Na_0.32Bi_1.68Ti₂O_6.46(OH)_0.44 with the cubic cell of a=10.339(5) Å was prepared by hydrothermal reaction using TiO₂ (anatase) and Bi₂O₃ in NaOH solution. This compound was obtained when the molar ratio of NaOH/TiO₂ was above 2 and the reaction temperature was above 240 °C. The TG-curve of as-prepared sample showed a mass loss of 0.8 mass% which was caused by release of OH group. This compound decomposed to a pyrochlore-type compound and a layered-type Na_0.5Bi_4.5Ti₄O₁₅ above 800 °C. The optical band gap of Na_0.32Bi_1.68Ti₂O_6.46(OH)_0.44 was estimated to be 2.5 eV.     

Synthesis of MnOOH nanorods by cluster growth route from [Mn12O12(RCOO)16(H2O)n] (R=CH3, C2H5). Rational conversion of MnOOH into Mn3O4 or MnO2 Nanorods

Single-crystalline nanorods of γ-MnOOH (manganite) phase with diameters of 120 nm and lengths of 1100 nm have been prepared using a new cluster growth route under low-temperature hydrothermal conditions starting from [Mn₁₂O₁₂(CH₃COO)₁₆(H₂O)₄]·2CH₃COOH·4H₂O or [Mn₁₂O₁₂(C₂H₅COO)₁₆(H₂O)₃]·4H₂O without any catalyst or template agents. The so-obtained nanorods were studied by X-ray diffraction (XRD), infrared (IR) spectroscopy, Raman spectroscopy and high resolution transmission electron microscopy (HRTEM). Their thermal conversion opens an access to Mn₃O₄ (hausmannite) and β-MnO₂ (pyrolusite) nanorods, respectively, under argon or air atmosphere. A coercive field of 12.4 kOe was obtained for the Mn₃O₄ nanorods.