Kinetics and mechanism of the dehydration of α-NiSO4·6H2O

A study of the thermal dehydration of α-NiSO₄·6H₂O has been performed by power compensation differential scanning calorimetry in flowing nitrogen. No significant differences in behaviour were observed using either uncrushed crystalline powders or single crystal slabs cleaved parallel to {001}. In good agreement with previous findings, the kinetic analysis of the thermal curves confirms the validity of an=2 Avrami-Erofeev equation (AE2) in isothermal experiments at low (338–343 K) temperatures or in the initial portions of variable temperature runs. The kinetic obedience is however of an ‘order of reaction’ type for the main portion of the variable temperature runs and, for isothermal experiments, in the upper part of the temperature range investigated. Values of activation energies and frequency factors are reported. Parallel studies by optical microscopy showed relevant changes of surface texture when partially (thermally or vacuum) dehydrated {001} cleaved surface were submitted to rehydration. This phenomenon (named orange peel formation) indicates that a dehydrated layer forms on the crystal surfaces preceding the appearance of product crystals (germination or nucleation). Microscopy also revealed that reaction goes on inside the crystal and that product formation takes place in the bulk phase, following lattice collapse in experiments at high heating rates. Combined with previous results, these new experimental findings allow us to formulate a mechanism for the present transformation, comprising three main rate processes:

1. the reaction (detachment of water molecules from their lattice positions in the reactant);
2. the migration of the water molecules freed by the reaction through the initially formed, water-depleted layer enveloping the reactant crystal;
3. the crystallization of such a layer to form the product.

     

Solvent effects in the reactivity of phenylethyl hydroperoxide, II. Reactivity and β-scission of α-phenylethoxy radicals in the solutions of α-phenylethylhydroperoxide

Efficient cleavage of -phenylethoxy radicals (HRO^.) was observed in CH₃CN at 304 K. From measurements of the quantum yields of product formation, it was calculated that      

Magnetic nano-Fe3O4-supported 1-benzyl-1,4-dihydronicotinamide (BNAH): synthesis and application in the catalytic reduction of α,β-epoxy ketones

A novel magnetically recoverable organic hydride compound was successfully constructed by using silica-coated magnetic nanoparticles as a support. An as-prepared magnetic organic hydride compound, BNAH (1-benzyl-1,4-dihydronicotinamide), showed efficient activity in the catalytic reduction of α,β-epoxy ketones. After reaction, the magnetic nanoparticle-supported BNAH can be separated by simple magnetic separation which made the separation of the product easier.     

Investigation of the selective reduction of isatin derivatives. Synthesis of α-hydroxyacetophenone derivatives and ethyl spiro-3,3-(ethylenedioxy)-2-hydroxyindoline carboxylates

The product from the reduction of ethyl spiro-3,3-(ethylenedioxy)-2-oxindole carboxylates (1) using borohydride salts has been found to be dependant upon both solvent and metal ion. With polar solvents and lithium bromide/sodium borohydride, spiro-3,3-(ethylenedioxy)-2-hydroxyindole carboxylates (2) are obtained in high yields whilst [2-(2-hydroxymethyl-[1,3]dioxolan-2-yl)-phenyl]-carbamic acid ethyl esters (3) are obtained using sodium borohydride in less polar solvents.     

Heterocyclic compounds Communication 60. Synthetic anesthetics XXI synthesis of esters of the α-forms of 1-alkenyl-2.5-dimethyl-4-piperidinols

Russian Chemical Bulletin -     

Photoinduced radical reactions of α-alkylated ethyl 2-oxo-1-cyclopentanecarboxylate derivatives: α-cleavage and cyclization to the skeleton of linear cyclohexano diquinanes

The tricyclic core of linear cyclohexano diquinanes was synthesized using photoinduced electron transfer (PET) as a key step. The reaction proceeded in high regioselective manner via ketyl radical anions leading to distonic δ-keto radical anion as reactive intermediates. The irradiation was carried out at a wavelength of 254 nm with triethylamine (TEA) as a strong reducing reagent in acetonitrile. We also showed that the photolysis of the α-alkylated 2-oxocyclopentanecarboxylate derivatives does not lead to any cyclization products via a δ-hydrogen abstraction process. In this case α-C-C bond cleavage as a predominant process was observed.     

Kinetics, substrate selectivity and mechanisms of the first step in the oxidation of alkylbenzenes in the HVO3−H2SO4 system

The kinetics, kinetic isotope effects, and substrate selectivity were studied for the oxidation of alkylbenzenes in the HVO₃−H₂SO₄ system at 30°C. The reaction proceeds by an electrophilic substitution mechanism through a slow step involving formation of a charge transfer complex between the arene and VO ₂ ⁺ cation and is similar to nitration by the NO ₂ ⁺ cation. L. M. Litvinenko Institute of Physical Organic and Coal Chemistry, National Academy of Sciences of Ukraine, 70 R. Lyuksemburg ul., Donetsk 340114, Ukraine. Translated from Teoreticheskaya i éksperimental'naya Khimiya, Vol. 35, No. 6, pp. 349–353, November–December, 1999.     

Direct electrocatalytic oxidation of nitric oxide and reduction of hydrogen peroxide based on α-Fe2O3 nanoparticles-chitosan composite

α-Fe₂O₃ nanoparticles prepared using a simple solution-combusting method have been dispersed in chitosan (CH) solution to fabricate nanocomposite film on glass carbon electrode (GCE). The as-prepared α-Fe₂O₃ nanoparticles were characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM). The nanocomposite film exhibits high electrocatalytic oxidation for nitric oxide (NO) and reduction for hydrogen peroxide (H₂O₂). The electrocatalytic oxidation peak is observed at +0.82 V (vs. Ag/AgCl) and controlled by diffusion process. The electrocatalytic reduction peak is observed at −0.45 V (vs. Ag/AgCl) and controlled by diffusion process. This α-Fe₂O₃-CH/GCE nanocomposite bioelectrode has response time of 5 s, linearity as 5.0 × 10⁻⁷ to 15.0 × 10⁻⁶ M of NO with a detection limit of 8.0 × 10⁻⁸ M and a sensitivity of −283.6 μA/mM. This α-Fe₂O₃-CH/GCE nanocomposite bioelectrode was further utilized in detection of H₂O₂ with a detection limit of 4.0 × 10⁻⁷ M, linearity as 1.0 × 10⁻⁶ to 44.0 × 10⁻⁶ M and with a sensitivity of 21.62 μA/mM. The shelf life of this bioelectrode is about 6 weeks under room temperature conditions.     

Fe- and Cu-oxides supported on γ-Al2O3 as catalysts for the selective catalytic reduction of NO with ethanol. Part I: catalyst preparation,characterization, and activity

Fe- and Cu-oxides supported on γ-alumina (γ-Al₂O₃; metal loading of 3 mass %) were investigated as alternative catalysts to the conventional Ag-based system in the selective catalytic reduction of NO with ethanol (EtOH-SCR). The catalysts were characterized by elemental analysis, N₂ sorption, X-ray diffraction, temperature-prgrammed desorption of NH₃, temperature-programmed reduction with H2, diffuse reflectance UV-VIS (DR-UV-VIS) spectroscopy, and compared with 3 mass % Ag/γ-Al₂O₃ as a reference catalyst. Catalytic experiments were carried out between 423 K and 773 K in the steady state and by temperature-programmed surface reaction (TPSR) experiments. For all catalysts, the highest NO conversion (900 ppm (ppm = parts of the mixture component per million parts of all mixture components) NO, 900 ppm EtOH, 0.5 vol. % H₂O, 4 vol. % O₂ in He) was found at 573 K. While 84 % of NO were converted over the Ag-based catalysts, only 20–60 % NO conversion was observed for the Fe- and Cu-containing catalysts. Total oxidation of ethanol as an unwanted side reaction occurs over 3 mass % Cu on γ-Al₂O₃ already at 573 K, whereas the highest activity of 3 mass % Fe on γ-Al₂O₃ for this conversion was reached at 743 K. For lower temperatures, partial oxidation of ethanol leads to organic by-products which can act as active intermediates in EtOH-SCR. TPSR experiments show that ethanol reacts over both the Fe- and the Cu-based catalysts to organic by-products, such as ethene or acetaldehyde, which affect the EtOH-SCR reaction.     

Supported catalysts based on Pd–In nanoparticles for the liquid- phase hydrogenation of terminal and internal alkynes: 2. catalytic properties

Pd–In/Al₂O₃ and Pd–In/MgAl₂O₄ catalysts prepared from dinuclear Pd–In acetate complexes were studied in the hydrogenation of alkyne compounds with different structures. The Pd–In catalysts demonstrate high selectivity in the hydrogenation of internal alkynes comparable with that of the Lindlar catalyst. Similar activity/selectivity characteristics are reached at a significantly lower Pd content. For terminal alkynes, the favorable effect of Indium introduction is considerably less pronounced. An analysis of the In effect on the selectivity and the ratio between the rates of the first and second hydrogenation steps suggests that the reaction selectivity is determined to a large extent by a thermodynamic factor (adsorption–desorption equilibrium between the reactants and the reaction products).