Primary amino-functionalized N-heterocyclic carbene ligands as support for Au(I)···Au(I) interactions: structural, electrochemical, spectroscopic and computational studies of the dinuclear [Au2(NH2(CH2)2imMe)2][NO3]2

The N-heterocyclic carbene (NHC) precursor, 1-(2-aminoethyl)-3-methylimidazolium nitrate, [NH(2)(CH(2))(2)imMe)]NO(3) ([3][NO(3)]) reacted with Ag(2)CO(3) in dimethyl sulfoxide readily yielding a Ag(I)-(NHC-NH(2)) complex presenting limited stability in solution. The in situ carbene transfer reaction of the latter with [Au(tht)Cl] afforded the first example of a dinuclear gold(I) complex [Au(2)(NH(2)(CH(2))(2)imMe)(2)][NO(3)](2) ([5][NO(3)](2)) bearing a primary amino-functionalized NHC ligand. The complex has been characterized by NMR, mass spectrometry, X-ray crystallography and cyclic voltammetry; the electrochemical behaviour and photophysical properties of [5][NO(3)](2) have been also investigated and the experimental data have been compared with density functional theory (DFT) and Time Dependent (TDDFT) calculations. Single-crystal structural studies showed that the Au(I)-carbene compound contains dinuclear (AuL)(2) cations in which pairs of gold(I) centres are linked by a pair of bridging ligands, with a Au···Au aurophilic contact of 3.2332(17) ? that is maintained in solution as documented by the DFT calculations. Complex [5][NO(3)](2) is photoluminescent in solution at room temperature and the high energy emission peak at 410 nm is remarkably shifted with respect to the absorption band centered at 260 nm.     

Gold complexes with potentially tri- and tetradentate phosphinothiolate ligands

Reactions of [Au(PPh3)Cl], (Bu4N)[AuCl4] and the organometallic gold complex [Au(damp-C1,N)Cl2] (damp- = 2-(N,N-dimethylaminomethyl)phenyl) with the potentially tri- and tetradentate proligands PhP(C6H3-SH-2-R-3)2 (H2L1a, R = SiMe3; H2L1b, R = H) and P(C6H4-SH-2)3 (H3L2) result in the formation of mono- or dinuclear gold complexes depending on the precursor used. Monomeric complexes of the type [AuL1Cl] are formed upon the reaction with [Au(damp-C1,N)Cl2], but small amounts of dinuclear [AuL1]2 complexes with gold in two different oxidation states, +1 and +3, have been isolated as side-products. The dinuclear compounds are obtained in better yields from [AuCl4]-. A dinuclear complex having two Au(III) centers can be isolated from the reaction of [Au(PPh3)Cl] with H3L2, whereas from the reaction with H2L1b the mononuclear [Au(Ph3P)HL1b] is obtained, which contains a three-coordinate gold atom. Comparatively short gold-gold distances have been found in the dinuclear complexes (2.978(2) and 3.434(1) A). They are indicative of weak gold-gold interactions, which is unusual for gold(III).     

Oxidative addition of the imidazolium cation to zerovalent Ni, Pd, and Pt: a combined density functional and experimental study

Oxidative addition of different imidazolium cations to zerovalent group 10 metals, to afford heterocyclic carbene complexes, has been investigated by both density functional theory (DFT) and experimental studies. The theoretical analysis shows that addition of imidazoliums to Pt(0) and Ni(0) is more exothermic than to Pd(0), and Ni(0) is predicted to react with a much lower barrier than either Pt(0) or Pd(0). Strongly basic supporting ligands on the metal, as well as cis-chelating ligands, increase the exothermicity of the reaction and also lower the activation barrier. The addition of 2-H imidazoliums is easier and more exothermic than addition of 2-alkylimidazoliums, and a halo-imidazolium is expected to further lower the barrier to oxidative addition and increase the exothermicity. The DFT results show that all three of the metals should be able to oxidatively add imidazolium cations under appropriate conditions. Experimental studies confirmed that oxidative addition is possible, and a number of Pt- and Pd-carbene complexes were prepared via oxidative addition of imidazolium salts to M(0) precursors. Most significantly, oxidative addition of 2-H azolium salts was found to readily occur, and the reaction of 1,3-dimethylimidazolium tetrafluoroborate with Pt(PPh(3))(2) and Pt(PCy(3))(2) affords [PtH(dmiy)(PPh(3))(2)]BF(4) (10) and [PtH(dmiy)(PCy(3))(2)]BF(4) (11), while reaction between 3,4-dimethylthiazolium tetrafluoroborate and Pt(PCy(3))(2) yields [PtH(dmty)(PCy(3))(2)]BF(4) (12) (dmiy = 1,3-dimethylimidazolin-2-ylidene, dmty = 3,4-dimethylthiazolin-2-ylidene). Addition of 2-iodo-1,3,4,5-tetramethylimidazolium tetrafluoroborate to Pt(PPh(3))(4) or Pd(dcype)(dba) yields [PtI(tmiy)(PPh(3))(2)]BF(4) (9) and [PdI(tmiy)(dcype)]BF(4) (14), respectively (tmiy = 1,3,4,5-tetramethylimidazolin-2-ylidene, dcype = 1,3-bis(dicyclohexylphosphino)ethane)). X-ray crystal structures are reported for complexes 9 and 11 (cis and trans). These studies clearly show for the first time that oxidative addition of imidazolium and thiazolium cations is possible, and the results are discussed in terms of the ramifications for catalysis in imidazolium-based ionic liquids with both carbene-based and non-carbene-based complexes.     

Synthesis, crystal structure and hydroformylation activity of triphenylphosphite modified cobalt catalysts

The dinuclear complex [Co(2)(CO)(6)[P(OPh)3]2] (2) has been synthesised and was fully characterised. The solid state structure revealed a trans diaxial geometry, no bridging carbonyls, and Co-Co and Co-P bond lengths of 2.6722(4) and 2.1224(4) Angstrom, respectively. Catalysed hydroformylation of 1-pentene with 2 was attempted at temperatures in the range 120 to 210 degrees C and pressures between 34 and 80 bar. High pressure spectroscopy (HP-IR and HP-NMR) was used to detect hydride intermediates. High pressure infrared (HP-IR) studies revealed the formation of [HCo(CO)(3)P(OPh)3] (4) at ca. 110 degrees C, but at higher temperatures absorption bands corresponding to [HCo(CO)(4)]() were observed. The hydride intermediate 4 has also been synthesised and characterised. Upon increased ligand concentration, HP-IR studies showed the formation of new carbonyl absorption bands due to a higher substituted cobalt carbonyl complex-[HCo(CO)(2)[P(OPh)3]2] (5), which is believed to be catalytically less active. Complex 5 has been synthesised independently and was fully characterised. A low temperature crystal structural study of 5 revealed a trigonal bipyramidal structure with a trans H-Co-CO arrangement and two equatorial phosphite ligands, the Co-P bond lengths being 2.1093(8) and 2.1076(8)[Angstrom], respectively.     

Controlled aggregation of heterometallic nanoscale Cu12Ln6 clusters (Ln = Gd(III) or Nd(III)) into 2D coordination polymers

Discrete dinuclear and polymeric heterometallic copper(II)-lanthanide(III) complexes have been synthesized upon variation of pH and characterized by X-ray diffraction analysis. Reactions of the ligand Htza (tetrazole-1-acetic acid) with copper(II) and lanthanide(III) salts gave dinuclear [CuLn(tza)4(H2O)5Cl] complexes at the low pH of 3.5 and 2D heterometallic coordination polymers with high-nuclearity [{Cu2(OH)2}2{Cu12Ln6(mu3-OH)24(Cl)(1/2)(NO3)(1/2)(tza)12(H2O)18}](NO3)(9).8H2O (Ln = Gd or Nd) at a higher pH of 6.6. The acidity of the reaction solution can cause drastic changes in the structures of the products. In the dinuclear complexes, each pair of adjacent dinuclear molecules is linked through hydrogen bonds and pi-pi stacking interactions, and the whole structure is a hydrogen-bonded three-dimensional cubic net. In the coordination polymers, the connecting nodes are [Cu12Ln6] units, which are interconnected by [Cu2O2] units into two-dimensional structures. Magnetic studies exhibit the existence of weak exchange interactions between the Cu(II) and Ln(III) ions bridged by carboxylate and hydroxy ligands.     

Colorless, non-luminescent; colorless, luminescent; and yellow, luminescent crystals of the cation [Au{C(NHCH(3))(NHCH(2)CH(2)OH)}(2)](+). The roles of anions and hydrogen bonding in determining the aggregation of two-coordinate gold(I) cations

Crystallographic and luminescence studies on salts of the two-coordinate carbene cation, [Au{C(NHCH(3))(NHCH(2)CH(2)OH)}(2)](+), demonstrate the ability of the cation to exist in three different states of aggregation. In colorless, non-luminescent [Au{C(NHCH(3))(NHCH(2)CH(2)OH)}(2)]Cl the cation crystallizes as a monomer with the nearest gold(i) center 6.7890(11) A away. Colorless, luminescent [Au{C(NHCH(3))(NHCH(2)CH(2)OH)}(2)]AsF(6) forms dimers with an AuAu separation of 3.1288(4) A. These dimers form weakly associated extended chains of cations with additional AuAu separations of 3.6625(5) A. [Au{C(NHCH(3))(NHCH(2)CH(2)OH)}(2)]PF(6) is isostructural. Yellow, luminescent [Au{C(NHCH(3))(NHCH(2)CH(2)OH)}(2)](3)(AsF(6))(2)Cl.0.5(H(2)O)(2) and [Au{C(NHCH(3))(NHCH(2)CH(2)OH)}(2)](3)(PF(6))(2)Cl.0.5(H(2)O)(2) form trimers that further aggregate into extended chains with rather short AuAu separations of 3.1301(14) A, 3.1569(14) A and 3.1415(14) A. Absorption, emission and excitation spectra are reported for these salts. The excitation and emission results from the interactions between the gold centers and involves transitions between the filled d(z)((2)) band and the empty p(z) bands with the z axis pointing along the chain of cations.     

Mononuclear, dinuclear, and hexanuclear goldI complexes with (aza-15-crown-5)dithiocarbamate

The reactions of sodium (aza-15-crown-5)dithiocarbamate with [AuClL] precursors lead to mono-, di-, or hexanuclear derivatives depending on L. The homoleptic hexanuclear gold(I) cluster [Au6(S2CNC10H20O4)6] is formed by displacement of the chloride and isocyanide ligands in [AuCl(CN(2,6-Me2C6H3))]. X-ray diffraction studies show a novel geometry in gold cluster chemistry where the six gold atoms display a cyclohexane-like geometry in a chair conformation with Au-Au-Au angles of 117.028(9) degrees, two short gold-gold distances of 2.9289(5) A, and bidentate bridging dithiocarbamate ligands. The molecular structure shows a crown of gold atoms surrounded by crown ethers. This derivative luminesces at 569 nm at room temperature in the solid state. A dinuclear isomer [Au2(S2CNC10H20O4)2] had been reported previously and was obtained by reaction with [AuCl(SMe2)]. The mechanism to obtain the hexanuclear derivative involves a mononuclear intermediate [Au(S2CNC10H20O4)(CNR)] for which the X-ray structure shows a short gold-gold distance of 3.565 A with the two molecules in an anti configuration. Phosphine gold(I) mononuclear derivatives [Au(S2CNC10H20O4)(PR3)] (R = Me, Ph, both characterized by X-ray diffraction) and dinuclear diphosphine derivatives [{Au(S2CNC10H20O4)}2(mu-P-P)] (P-P = dppm, bis(diphenylphosphinomethane); dppp, 1,3-bis(diphenylphosphinopropane); and dppf, 1,1'-bis(diphenylphosphinoferrocene)) are also reported. In the mononuclear complexes, the molecular structure confirms that the dithiocarbamato ligand is mainly acting as monodentate, with a second longer Au-S distance of 3.197 (PMe3), 2.944(4) (PPh3), and 2.968 A (CNR). Three phosphine complexes are emissive at 562 (PMe3), 528 (PPh3), and 605 nm (dppm), at 77 K. X-ray diffraction studies of the dppm derivative show gold-gold intramolecular contacts of 3.0972(9) A (3.2265(10) A for a second independent molecule) and basically monodentate coordination of the dithiocarbamato ligands. All the complexes extract sodium and potassium salts from aqueous solutions. The diphosphine derivatives are noticeably better extractors than the monophosphino derivatives, mainly for potassium salts.     

Synthesis, characterization, and luminescent properties of dinuclear gold(I) xanthate complexes: X-ray structure of [Au2(nBu-xanthate)2

The synthesis and characterization of gold(I) complexes of butyl xanthate [Au(2)((n)()Bu-xanthate)(2)], 1, and ethyl xanthate [Au(2)(Et-xanthate)(2)], 2, are described. These complexes are readily prepared from the reaction between Au(THT)Cl (THT = tetrahydrothiophene) and the corresponding xanthate ligands as the potassium salts. The two xanthate complexes are characterized by (1)H NMR, IR, mass spectrometry, elemental analysis, and UV-vis techniques. Thermal gravimetric analysis (TGA) and differential thermal analysis (DTA) show that the gold xanthate complexes decompose to yield mainly gold metal at approximately 200 degrees C, confirmed by X-ray powder diffraction. Excitation of the complexes at 450 nm in the solid state at 77 K produces a strong red emission at ca. 690 nm with a broad asymmetric profile tailing to 850 nm. The dinuclear gold(I) xanthate complex, [Au(2)(nBu-xanthate)(2)], 1, is the first structurally characterized binary Au(I) xanthate. The Au...Au distance in the eight-membered ring is 2.8494(15) A while the shortest intermolecular Au...Au interaction between independent units is 3.64 A. The angle between the planes containing the molecules in the unit cell is approximately 69.56 degrees. The light green plates of [Au(mu-S(2)COBu(n))](2) crystallize in the orthorhombic space group P2(1)2(1)2 with a = 37.254(14) A, b = 7.287(3) A, c = 6.054(2) A, alpha = beta = gamma = 90 degrees, Z = 4, and V = 1643.4(11) A(3).     

Luminescent di- and polynuclear organometallic gold(I)-metal (Au2, {Au2Ag}n and {Au2Cu}n) compounds containing bidentate phosphanes as active antimicrobial agents

The reaction of new dinuclear gold(I) organometallic complexes containing mesityl ligands and bridging bidentate phosphanes [Au(2)(mes)(2)(μ-LL)] (LL=dppe: 1,2-bis(diphenylphosphano)ethane 1a, and water-soluble dppy: 1,2-bis(di-3-pyridylphosphano)ethane 1b) with Ag(+) and Cu(+) lead to the formation of a family of heterometallic clusters with mesityl bridging ligands of the general formula [Au(2)M(μ-mes)(2) (μ-LL)][A] (M=Ag, A=ClO(4)(-), LL=dppe 2a, dppy 2b; M=Ag, A=SO(3)CF(3)(-), LL=dppe 3a, dppy 3b; M=Cu, A=PF(6)(-), LL=dppe 4a, dppy 4b). The new compounds were characterized by different spectroscopic techniques and mass spectrometry The crystal structures of [Au(2)(mes)(2)(μ-dppy)] (1b) and [Au(2)Ag(μ-mes)(2)(μ-dppe)][SO(3)CF(3)] (3a) were determined by a single-crystal X-ray diffraction study. 3a in solid state is not a cyclic trinuclear Au(2)Ag derivative but it gives an open polymeric structure instead, with the {Au(2)(μ-dppe)} fragments "linked" by {Ag(μ-mes)(2)} units. The very short distances of 2.7559(6)?? (Au-Ag) and 2.9229(8)?? (Au-Au) are indicative of gold-silver (metallophilic) and aurophilic interactions. A systematic study of their luminescence properties revealed that all compounds are brightly luminescent in solid state, at room temperature (RT) and at 77?K, or in frozen DMSO solutions with lifetimes in the microsecond range and probably due to the self-aggregation of [Au(2)M(μ-mes)(2)(μ-LL)](+) units (M=Ag or Cu; LL=dppe or dppy) into an extended chain structure, through Au-Au and/or Au-M metallophilic interactions, as that observed for 3a. In solid state the heterometallic Au(2)M complexes with dppe (2a-4a) show a shift of emission maxima (from ca. 430 to the range of 520-540?nm) as compared to the parent dinuclear organometallic product 1a while the complexes with dppy (2b-4b) display a more moderate shift (505 for 1b to a max of 563?nm for 4b). More importantly, compound [Au(2)Ag(μ-mes)(2)(μ-dppy)]ClO(4) (2b) resulted luminescent in diluted DMSO solution at room temperature. Previously reported compound [Au(2)Cl(2)(μ-LL)] (LL dppy 5b) was also studied for comparative purposes. The antimicrobial activity of 1-5 and Ag[A] (A=ClO(4)(-), SO(3)CF(3)(-)) against gram-positive and gram-negative bacteria and yeast was evaluated. Most tested compounds displayed moderate to high antibacterial activity while heteronuclear Au(2)M derivatives with dppe (2a-4a) were the more active (minimum inhibitory concentration 10 to 1?μg?mL(-1)). Compounds containing silver were ten times more active to gram-negative bacteria than the parent dinuclear compound 1a or silver salts. Au(2)Ag compounds with dppy (2b, 3b) were also potent against fungi.     

Strong intra- and intermolecular aurophilic interactions in a new series of brilliantly luminescent dinuclear cationic and neutral au(I) benzimidazolethiolate complexes

The structural and photophysical properties of a new series of cationic and neutral Au(I) dinuclear compounds (1 and 2, respectively) bridged by bis(diphenylphosphino)methane (dppm) and substituted benzimidazolethiolate (X-BIT) ligands, where X = H (a), Me (b), OMe (c), and Cl (d), have been studied. Monocationic complexes, [A(u2)(micro-X-BIT)(micro-dppm)](CF(3)CO(2)), were prepared by the reaction of [A(u2)(micro-dppm)](CF(3)CO(2))(2) with 1 equiv of X-BIT in excellent yields. The cations 1a-1d possess similar molecular structures, each with a linear coordination geometry around the Au(I) nuclei, as well as relatively short intramolecular Au(I)...Au(I) separations ranging between 2.88907(6) A for 1d and 2.90607(16) A for 1a indicative of strong aurophilic interactions. The cations are violet luminescent in CH(2)Cl(2) solution with a lambda(em)(max) of ca. 365 nm, assigned as ligand-based or metal-centered (MC) transitions. Three of the cationic complexes, 1a, 1b, and 1d, exhibit unusual luminescence tribochromism in the solid-state, in which the photoemission is shifted significantly to higher energy upon gentle grinding of microcrystalline samples with DeltaE = 1130 cm(-1) for 1a, 670 cm(-1) (1b), and 870 cm(-1) (1d). The neutral dinuclear complexes, [A(u2)(micro-X-BIT)(micro-dppm)] (2a-2d) were formed in good yields by the treatment of a CH(2)Cl(2) solution of cationic compounds (1) with NEt(3). 2a-2d aggregate to form dimers having substantial intra- and intermolecular aurophilic interactions with unsupported Au(I)...Au(I) intermolecular distances in the range of 2.8793(4)-2.9822(8) A, compared with intramolecular bridge-supported separations of 2.8597(3)-2.9162(3) A. 2a-2d exhibit brilliant luminescence in the solid-state and in DMSO solution with red-shifted lambda(em)(max) energies in the range of 485-545 nm that are dependent on X-BIT and assigned as ligand-to-metal-metal charge transfer (LMMCT) states based in part on the extended Au...Au...Au...Au interactions.     

Synthesis and properties of gold alkene complexes. Crystal structure of [Au(bipy(oXyl))(eta(2)-CH(2)=CHPh)](PF(6)) and DFT calculations on the model cation [Au(bipy)(eta(2)-CH(2)=CH(2))](+)

Unprecedented 16-electron gold(i) olefin complexes of general formula [Au(bipy(R,R'))(eta(2)-olefin)](PF(6)) and [Au(2)(bipy(R,R'))(2)(mu-eta(2):eta(2)-diolefin)](PF(6))(2) (bipy(R,R') = 6-substituted-2,2'-bipyridine) have been prepared by reaction of dinuclear gold(III) oxo complexes [Au(2)(bipy(R,R'))(2)(mu-O)(2)](PF(6))(2) with the appropriate olefin. The X-ray crystal structures of two mononuclear complexes (olefin = styrene) show in-plane coordination of the olefin and a C[double bond, length as m-dash]C bond distance considerably lengthened with respect to the free olefin. The spectroscopic properties of the complexes are discussed and compared with those of analogous d(10) metal derivatives. Both structural and spectroscopic information indicate a substantial contribution of pi-back-donation to the Au-olefin bond in the three-coordinate species. Theoretical calculations carried out at the hybrid-DFT level on the model compound [Au(bipy)(eta(2)-CH(2)[double bond, length as m-dash]CH(2))](+) show excellent agreement with the experimental findings giving in addition an estimate of a pi-back-bonding contribution higher than that of the sigma-bonding.     

Luminescence tribochromism and bright emission in gold(I) thiouracilate complexes

New dinuclear Au(I) complexes containing bridging thiouracilate and bis(diphenylphosphino)methane ligands have been synthesized and characterized structurally and spectroscopically. The compounds exhibit a unique behavior of solid-state luminescence tribochromism in which photoemission turns on upon gentle grinding of the sample and a sensitivity to pH in fluid solution. The emissive form in the solid state exhibits a bright blue or cyan emission upon irradiating at 375 nm. Structural studies show that the nonemissive form of the complexes has an extended helical ...Au...Au...Au... structure in the solid with weak aurophilic interactions, whereas the blue emissive form has a strong intermolecular aurophilic interaction in the solid that leads to an arrangement of dimers of dinuclear (Au2) complexes. Interconversion between the two forms can be carried out by either recrystallization for solid-state samples or by exposure to vapors of volatile acid or base for fluid solutions of the complexes.     

An unprecedented, figure-of-eight, dinuclear iridium(I) dicarbene and new iridium(III) 'pincer' complexes

An unusual dinuclear Ir(i) complex bridged by two N-heterocyclic biscarbene ligands, forming a 20-membered, figure-of-eight dimetallacycle, and new C(NHC)CC(NHC) pincer complexes of Ir(iii) have been obtained directly from the bis(imidazolium) precursors and [Ir(mu-Cl)(cod)](2).     

Sulfonate-tagged 1,4-diazabutadiene (DAD(S)) ligands and their noble-metal complexes--synthesis, characterization and immobilization in ionic liquids

A series of sulfonate-tagged 1,4-diazabutadiene (DAD(S)) ligands was prepared as salts with typical ionic liquid (IL) cations ([EMIM](+), [BMIM](+), [BMMIM](+), Bu(4)N(+), Bu(3)PMe(+), [Gua-4,4-4,4-4,1](+)). Complexation behaviour of the ligands was investigated by preparing complexes of the types [BMMIM](2)[MCl(2)(DAD(S))] (M = Pd, Pt), [BMMIM][Rh(COD)(DAD(S))] and [BMMIM](2)[Mo(CO)(4)(DAD(S))]. Using UV-Vis spectroscopy, the latter sulfonate-tagged chromophore was shown to be well soluble in the sulfonate IL [BMIM]OTf and completely insoluble in toluene, resulting in perfect immobilization. The crystal structures of [HNEt(3)](2)[2,6-Me(2)-Me-DAD(S)], [BMIM](2)[2,6-Me(2)-Me-DAD(S)], [BMMIM](2)[2,4,6-Me(3)-Me-DAD(S)], [BMMIM](2)[2,6-iPr(2)-Me-DAD(S)] and [HNEt(3)](2)[PdCl(2)(2,6-Me(2)-Me-DAD(S))] were determined. Regarding the diimine fragment, they show geometries similar to the respective non-sulfonated parent compounds.     

Tricarbonylrhenium(I) complexes of highly symmetric hexaazatrinaphthylene ligands (HATN): structural, electrochemical and spectroscopic properties

The new mononuclear and dinuclear tricarbonylrhenium(I) complexes [(HATN)Re(CO)(3)Cl] (1-Cl) and [(μ-Me(6)-HATN)[Re(CO)(3)Cl](2)] (2-Cl(2)) of highly symmetric ligands HATN and Me(6)-HATN were synthesized and structurally characterized. X-Ray crystal structures reveal identical strained aromatic systems and out of the plane fac-Re(CO)(3)Cl units for both complexes. The packing geometry in the unit cell of 1 suggests intermolecular π-π association. Infrared spectroelectrochemistry (SEC) experiments confirmed ligand-based reductions. To get more insight into the reduction mechanism the triflate salts, [(HATN)Re(CO)(3)](OTf) (1-OTf) and [(μ-Me(6)HATN){Re(CO)(3)}(2)](OTf)(2) (2-OTf(2)), were synthesized. Their electrochemical and spectroelectrochemical behavior also exhibits reduction of the aromatic systems. The electronic absorption spectral features of the one electron reduced species were studied by UV-vis-NIR spectroscopy, which shows a broad shoulder at 1500 nm, confirming intra-ligand charge transfer (ILCT). Density functional theory (DFT) calculations on the complexes 1-Cl and 2-Cl(2) for structural optimization show good agreement with experimental bond lengths and bond angles. The spin density plot shows a metal based HOMO and HATN ligand centered LUMO.     

Cation-cation complexes of pentavalent uranyl: from disproportionation intermediates to stable clusters

Three new cation-cation complexes of pentavalent uranyl, stable with respect to the disproportionation reaction, have been prepared from the reaction of the precursor [(UO(2)py(5))(KI(2)py(2))](n) (1) with the Schiff base ligands salen(2-), acacen(2-), and salophen(2-) (H(2)salen = N,N'-ethylene-bis(salicylideneimine), H(2)acacen = N,N'-ethylenebis(acetylacetoneimine), H(2)salophen = N,N'-phenylene-bis(salicylideneimine)). The preparation of stable complexes requires a careful choice of counter ions and reaction conditions. Notably the reaction of 1 with salophen(2-) in pyridine leads to immediate disproportionation, but in the presence of [18]crown-6 ([18]C-6) a stable complex forms. The solid-state structure of the four tetranuclear complexes, {[UO(2)(acacen)](4)[μ(8)-](2)[K([18]C-6)(py)](2)} (3) and {[UO(2)(acacen)](4)[μ(8)-]}?2?[K([222])(py)] (4), {[UO(2)(salophen)](4)[μ(8)-K](2)[μ(5)-KI](2)[(K([18]C-6)]}?2?[K([18]C-6)(thf)(2)]?2?I (5), and {[UO(2)(salen)(4)][μ(8)-Rb](2)[Rb([18]C-6)](2)} (9) ([222] = [222]cryptand, py = pyridine), presenting a T-shaped cation-cation interaction has been determined by X-ray crystallographic studies. NMR spectroscopic and UV/Vis studies show that the tetranuclear structure is maintained in pyridine solution for the salen and acacen complexes. Stable mononuclear complexes of pentavalent uranyl are also obtained by reduction of the hexavalent uranyl Schiff base complexes with cobaltocene in pyridine in the absence of coordinating cations. The reactivity of the complex [U(V)O(2)(salen)(py)][Cp*(2)Co] with different alkali ions demonstrates the crucial effect of coordinating cations on the stability of cation-cation complexes. The nature of the cation plays a key role in the preparation of stable cation-cation complexes. Stable tetranuclear complexes form in the presence of K(+) and Rb(+), whereas Li(+) leads to disproportionation. A new uranyl-oxo cluster was isolated from this reaction. The reaction of [U(V)O(2)(salen)(py)][Cp*(2)Co] (Cp* = pentamethylcyclopentadienyl) with its U(VI) analogue yields the oxo-functionalized dimer [UO(2)(salen)(py)](2)[Cp*(2)Co] (8). The reaction of the {[UO(2)(salen)(4)][μ(8)-K](2)[K([18]C-6)](2)} tetramer with protons leads to disproportionation to U(IV) and U(VI) species and H(2)O confirming the crucial role of the proton in the U(V) disproportionation.     

Thermally triggered reductive elimination of bromine from Au(III) as a path to Au(I)-based coordination polymers

Four new [AuBr(2)(CN)(2)](-)-based coordination polymers, Zn(pyz)(NCMe)(2)[AuBr(2)(CN)(2)](2) (1; pyz = pyrazine), Co(pyz)[AuBr(2)(CN)(2)](2)·H(2)O (2) and [M(bipy)(2)(AuBr(2)(CN)(2))][(n)Bu(4)N][AuBr(2)(CN)(2)](2) (bipy = 4,4'-bipyridine), where M = Co (5) and Zn (6), were synthesized and three of them structurally characterized. 1 forms 1-D chains connected by pyz ligands while isostructural 5 and 6 form 3-D frameworks via [AuBr(2)(CN)(2)](-) and bipy linkers. Aqueous suspensions of 2, 5 and 6 or their precursors in situ (preferred) were heated hydrothermally to 125 °C, triggering the reductive elimination of bromine from the Au(III) centres, which yielded the [Au(CN)(2)](-)-based coordination polymers M(pyz)[Au(CN)(2)](2), where M = Zn (3) or Co (4) and Zn(bipy)[Au(CN)(2)][Au{Br(0.68)(CN)(0.32)}CN] (7), or a mixture of cyanoaurate(I)-containing products in the case of 5 and 6. The structural characterization of 3 revealed a [Au(CN)(2)](-)/pyz-based framework similar to previously reported Cu(pyz)[Au(CN)(2)](2), whereas 7 formed an intricate network consisting of individual 2-D networks held together by AuAu interactions and featuring the rare [AuBrCN](-) unit. The kinetics of the thermally-induced reductive elimination of Br(2) from K[AuBr(2)(CN)(2)] in 1-BuOH yielded a t(?) of approx. 10 min to 4 h from 98 to 68 °C, and activation parameters of ΔH(?) = 131(15) kJ mol(-1) and ΔS(?) = 14.97(4) kJ K(-1)mol(-1), indicating that the elimination of the halogen provides the highest barrier to activation.     

Tetracyanometalates of Ni,Pd, and Pt with cyclic diquaternary cations of 2,2'-bipyridine and 1,10-phenanthroline. A vibrational,crystallographic, and theoretical study of intermolecular weak interactions

The compounds (bpy-dq)[Ni(CN)(4)].2H(2)O (1), (bpy-dq)[Pd(CN)(4)].2H(2)O (2), and ((bpy-dq)[Pt(CN)(4)].2H(2)O (3) (bpy-dq = (C(12)H(12)N(2))(2+), 6,7-dihydrodipyrido[1,2-a:2',1'-c]pyrazinediium) and (phen-dq)[Ni(CN)(4)] (4), (phen-dq)[Pd(CN)(4)].H(2)O (5), and (phen-dq)[Pt(CN)(4)].H(2)O (6) (phen-dq = (C(14)H(12)N(2))(2+), 5,6-dihydropyrazino[1,2,3,4-lmn]-1,10-phenanthrolinediium) have been synthesized and characterized by X-ray diffraction. The three bipyridinium diquaternary salt derivatives are isostructural. The crystal structures of these dihydrated compounds consist of columns formed by alternating anion complexes and diquaternary cations, pi-pi interacting through cyanide ligands and the aromatic rings, and stabilized by an extended hydrogen-bond network. On the other hand, the packing in the phenanthrolinium diquaternary salt derivatives is strongly dependent on the hydration degree. Thus, the anhydrous [Ni(CN)(4)](2-) compound presents a laminar arrangement and the hydrated salts show a columnar packing, similar but not the same as compounds 1-3. The anhydrous form of compound 5 is isostructural with compound 4. Vibrational (IR, Raman) and thermogravimetric studies of these compounds have been carried out. Finally, DFT calculations have been performed on the isolated tetracyanometalate anions and diquaternary cations to assign the fundamental modes in the vibrational spectra. The intermolecular weak interactions were studied through the analysis of the charge density by using the theory of atoms in molecules (AIM).     

Spectroscopic and redox properties of amine-functionalized K2[OsII(bpy)(CN)4] complexes

We report the first examples of amine-functionalized K(2)[Os(II)(bpy)(CN)(4)] (bpy = 2,2'-bipyridine) complexes. The tetracyanoosmate complexes were prepared by UV irradiation (λ = 254 nm) of K(4)[Os(II)(CN)(6)] and primary amine-functionalized bpy ligands in acidic aqueous media. The aqueous solution pH dependences of the spectroscopic and redox properties of 4,4'- and 5,5'-substituted complexes have been investigated. The pendant amine functional groups and coordinated cyanide ligands are basic sites that can be sequentially protonated, thereby allowing systematic tuning of electrochemical and optical spectroscopic properties.     

Highly luminescent gold(I)-silver(I) and gold(I)-copper(I) chalcogenide clusters

The reactions of [AuClL] with Ag(2)O, where L represents the heterofunctional ligands PPh(2)py and PPh(2)CH(2)CH(2)py, give the trigoldoxonium complexes [O(AuL)(3)]BF(4). Treatment of these compounds with thio- or selenourea affords the triply bridging sulfide or selenide derivatives [E(AuL)(3)]BF(4) (E=S, Se). These trinuclear species react with Ag(OTf) or [Cu(NCMe)(4)]PF(6) to give different results, depending on the phosphine and the metal. The reactions of [E(AuPPh(2)py)(3)]BF(4) with silver or copper salts give [E(AuPPh(2)py)(3)M](2+) (E=O, S, Se; M=Ag, Cu) clusters that are highly luminescent. The silver complexes consist of tetrahedral Au(3)Ag clusters further bonded to another unit through aurophilic interactions, whereas in the copper species two coordination isomers with different metallophilic interactions were found. The first is analogous to the silver complexes and in the second, two [S(AuPPh(2)py)(3)](+) units bridge two copper atoms through one pyridine group in each unit. The reactions of [E(AuPPh(2)CH(2)CH(2)py)(3)]BF(4) with silver and copper salts give complexes with [E(AuPPh(2)CH(2)CH(2)py)(3)M](2+) stoichiometry (E=O, S, Se; M=Ag, Cu) with the metal bonded to the three nitrogen atoms in the absence of AuM interactions. The luminescence of these clusters has been studied by varying the chalcogenide, the heterofunctional ligand, and the metal.