Theoretical study of CeO2 and Ce2O3 using a screened hybrid density functional

The predicted structures and electronic properties of CeO(2) and Ce(2)O(3) have been studied using conventional and hybrid density functional theory. The lattice constant and bulk modulus for CeO(2) from local (LSDA) functionals are in good agreement with experiment, while the lattice parameter from a generalized gradient approximation (GGA) is too long. This situation is reversed for Ce(2)O(3), where the LSDA lattice constant is much too short, while the GGA result is in reasonable agreement with experiment. Significantly, the screened hybrid HSE functional gives excellent agreement with experimental lattice constants for both CeO(2) and Ce(2)O(3). All methods give insulating ground states for CeO(2) with gaps for the 4f band lying between 1.7 eV (LSDA) and 3.3 eV (HSE) and 6-8 eV for the conduction band. For Ce(2)O(3) the local and GGA functionals predict a semimetallic ground state with small (0-0.3 eV) band gap but weak ferromagnetic coupling between the Ce(+3) centers. By contrast, the HSE functional gives an insulating ground state with a band gap of 3.2 eV and antiferromagnetic coupling. Overall, the hybrid HSE functional gives a consistent picture of both the structural and electronic properties of CeO(2) and Ce(2)O(3) while treating the 4f band consistently in both oxides.     

Adsorption and protonation of CO2 on partially hydroxylated gamma-Al2O3 surfaces: a density functional theory study

Adsorption and protonation of CO2 on the (110) and (100) surfaces of gamma-Al2O3 have been studied using density functional theory slab calculations. On the dry (110) and (100) surfaces, the O-Al bridge sites were found to be energetically favorable for CO2 adsorption. The adsorbed CO2 was bound in a bidentate configuration across the O-Al bridge sites, forming a carbonate species. The strongest binding with an adsorption energy of 0.80 eV occurs at the O3c-Al5c bridge site of the (100) surface. Dissociation of water across the O-Al bridge sites resulted in partially hydroxylated surfaces, and the dissociation is energetically favorable on both surfaces. Water dissociation on the (110) surface has a barrier of 0.42 eV, but the same process on the (100) surface has no barrier with respect to the isolated water molecule. On the partially hydroxylated gamma-Al2O3 surfaces, a bicarbonate species was formed by protonating the carbonate species with the protons from neighboring hydroxyl groups. The energy difference between the bicarbonate species and the coadsorbed bidentate carbonate species and hydroxyls is only 0.04 eV on the (110) surface, but the difference reaches 0.97 eV on the (100) surface. The activation barrier for forming the bicarbonate species on the (100) surface, 0.42 eV, is also lower than that on the (110) surface (0.53 eV).     

Structures and reaction mechanisms of glycerol dehydration over H-ZSM-5 zeolite: a density functional theory study

The initial stage of glycerol conversion over H-ZSM-5 zeolite has been investigated using density functional theory (DFT) calculations on an embedded cluster model consisting of 128 tetrahedrally coordinated atoms. It is found that glycerol dehydration to acrolein and acetol proceeds favourably via a stepwise mechanism. The formation of an alkoxide species upon the first dehydration requires the highest activation energy (42.5 kcal mol(-1)) and can be considered as the rate determining step of the reaction. The intrinsic activation energies for the first dehydration are virtually the same for both acrolein and acetol formation, respectively, suggesting the competitive removal of the primary and secondary OH groups. A high selectivity to acrolein at moderate temperatures can be attributed to the selective activation of the stronger adsorption mode of glycerol through the secondary OH group and the kinetically favoured subsequent consecutive steps. In addition, the less reactive nature of acrolein relative to acetol precludes it from being converted to other products upon conversion to glycerol. In accordance with typical endothermic reactions, the forward rate constant for glycerol dehydration significantly increases with increasing reaction temperature.     

Reactions of Nb2 and Nb3 with CO, D2, N2, and O2: reconciling experimental kinetics with density functional theory-calculated reaction profiles

Calculated energy profiles for the reactions of neutral Nb(2) and Nb(3) metal clusters with CO, D(2), N(2), and O(2) are presented. In each reaction path, both a physisorption energy minimum, where the reactant remains intact, and a chemisorption energy minimum, where the reactant has dissociated, are calculated and linked by saddle points. We calculate branching ratios for the forward (dissociative) and reverse reactions which we compare with the experimental kinetic data. It is found that a combination of average thermal energies and barrier heights leads to wide variation in branching ratios which compares favourably to previously determined experimental reaction rates.     

Isomerization and decomposition of germiranes: a density functional study

The formation and decomposition pathways of germiranes (germacyclopropanes), i.e., products of reactions of the GeH₂ and GeMe₂ germylenes with ethylene, tetramethylethylene, buta-1,2,3-triene, and tetramethylbuta-1,2,3-triene, were studied using the density functional approach (PBE/TZ2P approximation). The thermodynamic stabilities of the structures under consideration were evaluated by calculating the Gibbs free energies under normal conditions (ΔG°₂₉₈). Addition of germylenes to the C=C bond can proceed as a single-step process without a barrier or involve the formation of a π-complex (the barrier to this process is lower than the sum of the energies of isolated reactants). Stability of the germiranes formed is determined by their stability to retrodecomposition into the initial germylene and olefin and to the three-membered ring opening followed by simultaneous 1,2-migration of the substituent at the Ge atom and formation of the secondary germylene. Alkyl substituents can efficiently block the opening of the three-membered ring and transformation of the cyclic structure into the secondary germylene, simultaneously decreasing the germirane stability to retrodecomposition. Decomposition into germylene and olefin under normal conditions is thermally favorable for hexamethylgermirane (ΔG°₂₉₈ = −5.7 kcal mol⁻¹), being thermally forbidden for the other germiranes studied in this work (Δ G°₂₉₈ > 0). The activation energy (E _a) for the germirane ring opening depends on the substituents at the germanium atom, namely, E _a ≤ 10 kcal mol⁻¹ for unsubstituted germiranes and E _a > 30 kcal mol⁻¹ for methyl-substituted germiranes. Taking the experimentally isolated germirane as an example, it was shown how the introduction of substituents and modification of the carbon skeleton make it possible to stabilize the germacyclopropane system. Dedicated to Academician A. L. Buchachenko on the occasion of his 70th birthday. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1943–1951, September, 2005.     

Structures of manganese polysulfides: mass-selected photodissociation and density functional calculations

Manganese polysulfide cations, MnS(x)(+) (x = 1-10), were studied with mass-selected photodissociation experiments and density functional calculations. We found that MnS(+), MnS(2)(+) and MnS(3)(+) undergo dissociation at 355 nm by loss of S, S(2) and S(3), respectively. The dissociation of larger clusters is relatively complex because of the existence of multiple isomers and multiple dissociation channels. The geometric structures of the low-lying isomers found by theoretical calculations are consistent with the dissociation channels observed in the experiments. The dissociation of MnS(x)(+) clusters occurs mainly by breaking of the Mn-S bonds since they are weaker than the S-S bonds.     

A density functional theory study on the atmospheric reaction of CH3O2 with HS: Mechanism and kinetics

The reaction mechanism of CH₃O₂ and HS was systematically investigated by density functional theory (DFT). Six singlet pathways and seven triplet ones are located on the potential surface (PES). The result indicates that the main products are CH₃O and HSO both on the singlet and triplet PES, different from the CH₃O₂ + OH reaction. Moreover, deformation density (ρ_def) and atoms in molecules (AIM) analyses were carried out to further uncover the nature of chemical bonding evolution in the primary pathways. Furthermore, reaction rate constants were calculated in the temperature range from 200 to 1000 K using the transition state theory with the Wigner and Eckart tunneling corrections. Our results can shed light on the title reaction and offer instructions for analogous atmospheric reactions, as well as experimental research in the future.     

Structures, reductive dechlorination, and electron affinities of selected polychlorinated dibenzo-p-dioxins: density functional theory study

Density functional theory calculations were performed to obtain the structures, vertical electron affinities, and adiabatic affinities of 15 polychlorinated dibenzo-p-dioxins (PCDDs), including several extremely toxic congeners. A three-parameter hybrid density functional, B3LYP, was utilized with two different basis sets, 6-311G(d,p) and 6-311+G(2d,2p). The optimized structures of all PCDDs under consideration were planar, while all corresponding anions attained nonplanar geometries. One of the C-Cl bonds on each PCDD anion was considerably elongated, and the dechlorination of PCDDs occurred as the departing chlorine bent off the aromatic ring plane for effective pi-sigma orbital mixing. The characteristic electron energy-dependent regioselective chloride ion loss channels for 1,2,3,7,8-pentaCDD were elucidated by transition-state theory calculations. The relative low-energy barrier for the dechlorination of 1,2,3,7,8-pentaCDD indicated the high likelihood of obtaining reductive dechlorination (RD) products that are more toxic than the parent species. The calculated vertical electron affinities of PCDDs are consistent with the available experimental attachment energies, and the positive adiabatic electron affinities suggest that PCDDs may act as electron acceptors in living cells.     

Partial oxidation of propylene catalyzed by VO3 clusters: a density functional theory study

Density functional theory (DFT) calculations are carried out to investigate partial oxidation of propylene over neutral VO 3 clusters. C=C bond cleavage products CH 3CHO + VO 2CH 2 and HCHO + VO 2CHCH 3 can be formed overall barrierlessly from the reaction of propylene with VO 3 at room temperature. Formation of hydrogen transfer products H 2O + VO 2C 3H 4, CH 2=CHCHO + VO 2H 2, CH 3CH 2CHO + VO 2, and (CH 3) 2CO + VO 2 is subject to tiny (0.01 eV) or small (0.06 eV, 0.19 eV) overall free energy barriers, although their formation is thermodynamically more favorable than the formation of C=C bond cleavage products. These DFT results are in agreement with recent experimental observations. VO 3 regeneration processes at room temperature are also investigated through reaction of O 2 with the CC bond cleavage products VO 2CH 2 and VO 2CHCH 3. The following barrierless reaction channels are identified: VO 2CH 2 + O 2 --> VO 3 + CH 2O; VO 2CH 2 + O 2 --> VO 3C + H 2O, VO 3C + O 2 --> VO 3 + CO 2; VO 2CHCH 3 + O 2 --> VO 3 + CH 3CHO; and VO 2CHCH 3 + O 2 --> VO 3C + CH 3OH, VO 3C + O 2 --> VO 3 + CO 2. The kinetically most favorable reaction products are CH 3CHO, H 2O, and CO 2 in the gas phase model catalytic cycles. The results parallel similar behavior in the selective oxidation of propylene over condensed phase V 2O 5/SiO 2 catalysts.     

Reactivity of Al3O3- cluster toward H2O studied by density functional theory

Density functional theory calculations (Becke's three parameter hybrid functional) have been done on a wide range of possible structures for the complexes formed in the reaction between Al(3)O(3) (-) and one or two water molecules. Both energetically competitive structural isomers of Al(3)O(3) (-) (kitelike and distorted rectangle) were considered. The structures of neutral complexes accessed from detachment of the stable anion structures were also optimized. The calculations predict that hydroxide complexes are energetically favored over Lewis acid-base and charge-dipole complexes. For Al(3)O(3) (-)/H(2)O complexes, the kite-based hydroxide and rectangle-based hydroxide are predicted to be nearly isoenergetic, while for Al(3)O(3) (-)/(H(2)O)(2), the rectangle-based dihydroxide emerges as being 0.5 eV more stable than the lowest energy kite-based dihydroxide. The structures of these and their neutrals are used to analyze anion PE spectra of Al(3)O(4)H(2) (-) and Al(3)O(5)H(4) (-) obtained previously [F. A. Akin and C. C. Jarrold, J. Chem. Phys. 118, 5841 (2003)].     

Structures and vibrational spectroscopic parameters of selenoxopropanedinitrile and selenoxosilanedicarbonitrile: Theoretical study based on density functional theory method

The molecular structures and vibrational spectra in harmonic and anharmonic approximations have been studied for selenoxopropanedinitrile and selenoxosilanedicarbonitrile in the gas phase. Density functional theory method with B3LYP functional and cc‐pVTZ basis set has been employed. Optimized structural parameters and spectroscopic constants, namely, anharmonic, rotational and centrifugal distortion, rotation–vibration coupling, and Coriolis coupling parameters, are reported. Infrared vibrational and Raman frequencies are provided with complete assignments to the fundamental bands, overtones, and combination tones of the molecules. This study shows that silicon for carbon substitution affects mainly those properties that are dependent on the CSe bond. The literature for these molecules is not available and therefore the data from this work would be suitable for their characterizations as and when they are synthesized. © 2009 Wiley Periodicals, Inc. Heteroatom Chem 20:208–217, 2009; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20535     

Mechanisms of difluoroethylene ozonolysis: a density functional theory study

We present a density functional theory (DFT) study on the mechanisms of gas-phase ozonolysis of three isomers of difluoroethylene, namely, cis-1,2-difluoroethylene, trans-1,2-difluoroethylene, and 1,1-difluoroethylene. MPW1K/cc-pVDZ and BHandHLYP/cc-pVDZ methods are employed to optimize the geometries of stationary points as well as the points on the minimum energy path (MEP). The energies of all the points were further refined at the QCISD(T)/cc-pVDZ and QCISD(T)/6-31+G(df,p) levels of theory with zero-point energy (ZPE) corrections. The ozone-cis-1,2-difluoroethylene reaction is predicted to be slower than the ozone-trans-1,2-difluoroethylene reaction. The enhanced reactivity of trans-1,2-difluoroethylene relative to the cis isomer is similar to the reactions of ozone with cis- and trans-dichloroethylene. The ozone-1,1-difluoroethylene reaction is predicted to be slower than the ozone-trans-1,2-difluoroethylene reaction. These results are in agreement with experimental studies. The calculated mechanisms indicate that in ozone-difluoroethylene reactions the yields of OH might be trivial, which is different from the reactions of ozone with unsaturated hydrocarbons.     

Structural, electronic, bonding, and elastic properties of NH3BH3: a density functional study

The structural, electronic, bonding, and elastic properties of the low-temperature orthorhombic phase of NH(3)BH(3) are studied by means of first-principles total energy calculations based on the pseudopotential method. The calculated structural parameters of NH(3)BH(3) are found to be in good agreement with the experimental values. From the band structure calculations, the compound is found to be an indirect bandgap insulator with the bandgap of 5.65 eV (5.90 eV) with LDA(GGA) along the Γ-Z direction. The Mulliken bond population and the charge density distributions are used to analyze the chemical bonding in NH(3)BH(3) . The study reveals that B-H bonds are more covalent than N-H bonds. The elastic constants are predicted for ambient as well as pressures up to 6 GPa, from which theoretical values of all the related mechanical properties such as bulk modulus, shear modulus, Young's modulus, Poisson's ratio, and anisotropy factors are calculated. It is found that NH(3)BH(3) is mechanically stable at ambient and also external pressures up to 6 GPa. As pressure increases all the calculated elastic moduli of NH(3)BH(3) increase, indicating that the compound becomes more stiffer and hard under pressure. From the ratio of shear modulus to bulk modulus (G/B), we conclude NH(3)BH(3) to be ductile in nature, and the ductility increases with pressure. The present results confirm the experimentally observed less plastic nature of the low-temperature phase of NH(3)BH(3) .     

Role of ligand bending in the photodissociation of O2 vs CO-heme: a time-dependent density functional study

Time-dependent DFT calculations reveal a strong dependence of low-lying excited states on the 相似文献   

Reaction of SC+(1D,3D) with H2O, NH3, and CH4: a density functional study.

Density Functional Theory has been used to explore quantitative details of the potential energy hypersurface for the insertion reaction of scandium ion into the O-H, N-H, and C-H bond of water, ammonia, and methane molecules leading to H2 elimination. Both singlet and triplet state channels have been considered. On the basis of the obtained results, it is possible to conclude that for the molecules considered the reaction is a spin-forbidden process. Indeed, it starts in the triplet ground state and ends in the singlet state, the change of the spin state probably occurring immediately after the formation of the electrostatic complex intermediate.     

Structural evolution in a hydrothermal reaction between Nb2O5 and NaOH solution: from Nb2O5 grains to microporous Na2Nb2O6.2/3H2O fibers and NaNbO3 cubes

Niobium pentoxide reacts actively with concentrate NaOH solution under hydrothermal conditions at as low as 120 degrees C. The reaction ruptures the corner-sharing of NbO(7) decahedra and NbO(6) octahedra in the reactant Nb(2)O(5), yielding various niobates, and the structure and composition of the niobates depend on the reaction temperature and time. The morphological evolution of the solid products in the reaction at 180 degrees C is monitored via SEM: the fine Nb(2)O(5) powder aggregates first to irregular bars, and then niobate fibers with an aspect ratio of hundreds form. The fibers are microporous molecular sieve with a monoclinic lattice, Na(2)Nb(2)O(6).(2)/(3)H(2)O. The fibers are a metastable intermediate of this reaction, and they completely convert to the final product NaNbO(3) cubes in the prolonged reaction of 1 h. This study demonstrates that by carefully optimizing the reaction condition, we can selectively fabricate niobate structures of high purity, including the delicate microporous fibers, through a direct reaction between concentrated NaOH solution and Nb(2)O(5). This synthesis route is simple and suitable for the large-scale production of the fibers. The reaction first yields poorly crystallized niobates consisting of edge-sharing NbO(6) octahedra, and then the microporous fibers crystallize and grow by assembling NbO(6) octahedra or clusters of NbO(6) octahedra and NaO(6) units. Thus, the selection of the fibril or cubic product is achieved by control of reaction kinetics. Finally, niobates with different structures exhibit remarkable differences in light absorption and photoluminescence properties. Therefore, this study is of importance for developing new functional materials by the wet-chemistry process.     

V, Nb, and Ta complexes with benzene in solid argon: An infrared spectroscopic and density functional study

Vanadium, niobium, and tantalum metal atoms, produced by laser ablation, are reacted with benzene vapor diluted in argon and codeposited onto a 7 K CsI window. The resulting reaction products are trapped, and the M(C6H6) and M(C6H6)2 complexes are identified by benzene isotopic substitution (C6H6, 13C6H6, C6D6). Density functional theory (DFT) frequency calculations are used to support molecular complex assignments. On the basis of the computed energies and a comparison of calculated and observed vibrational isotopic shifts, the ground electronic states and geometries are predicted. The bonding and electronic interactions in these molecules are discussed on the basis of the observed aromatic C-C breathing modes activated in the complexes.